VIEW USER AND LOCKED FILE

Dear Sir ..
I'm writing you because I would like to know if there's an utility, a software or something I can install or use on the application server in order to see which are the .fmx files locked on the application server and which user connected to the application server is locking the file.
can you help me with this problem?
Thanks.

Luca,
I don't know how that Tool would look like. All fmx'es are locked by the Operating user starting the server, mostly the oracle user.
However, you can use Enterprise Manager Control to see which users is logged on using your Forms. You have to activate it in the formsweb.cfg (em_control=1 or similar).
Regards,
Martin Malmstrom

Similar Messages

  • Certifying and Locking file Invalidates Certification and Signatures in Acrobat 9.0.0

    I am running Adobe Acrobat Professional 9.0.0. After creating a PDF document from within Microsoft Word, and it opens in Adobe Acrobat Professional, I performed the following steps:
    Select Forms => Add or Edit Forms.
    Select the digital signature tool and create three forms.
    Select Close Form Editing.
    Right click the first form and select Certify with Visible Signature.
    Set Permitted Actions After Signing to Form Fill in and digital signatures.
    Select Sign.
    Save the document, replacing the original file.
    Click on the second field, to sign it, and select sign.
    Save the document, replacing the original file.
    Click on the third field, to sign it.
    Select Lock Document After Signing, and select sign.
    Save the document, replacing the original file.
    I then find that the certification and the first signature are invalid. Only the last field to be signed is valid. Why is the previous signature and certification invalid? This only appears to occur if I both certify and lock the document when signing the last field. If I view the document in Adobe Reader 9, the result is the same. However, if I view the document in Adobe Reader 8 the certification and all the signatures are valid, as expected.
    Any assistance much appreciated.
    Regards,
    David,
    Canberra, Australia.

    Thanks for the responses Geo & Atin,
    Geo,
    Maybe I'm misunderstanding what you're saying, but http://www.adobe.com/devnet/reader/articles/reader_compatibility/readercomp_digitalsignat ures.pdf seems to indicate otherwise. Specifically:
    "In Acrobat 9, when additional signatures are applied to a document, the earlier signatures continue to have the Valid status, subject to the certificate validation rules that have been part of Acrobat's signature processing for a number of releases.
    In Acrobat 8, all signature appearances except the last one would have changed their status to "Valid with subsequent changes" (green check with a yellow warning triangle) if their certificate was still valid."
    So I read this that in neither version should the signature be "invalidated" by simply applying another signature, but in version 8 it showed the triangle warning, and in version 9 nothing would change. Indeed nothing does change in version 9 and it works EXACTLY as described above providing I don't both certify AND lock the document. I still don't understand why just the extra locking step violates the "certificate validation rules".
    Atin,
    I carried out the steps that you described, and it works thank you. I notice that the lock option is not present when I sign the last field now, but presumably this is because by the time the last field in signed, with the settings you describe the document is effectively fully locked anyhow?
    Now my problem is, is there any way of setting up templates of the signature fields laid out in the correct position, with the settings that you describe that I can use repeatably on many documents? I wish to use this function to electronically sign technical drawings which are drawn in a CAD package using a template based title block with 'drawn by', 'checked' and 'approved' fields etc. Each drawing may also have many sheets, each with the same fields in the title block. My concern is that to manually place digital signature fields in these 3 spaces in every title block after creating the PDF's, and then apply the settings you describe before certifying (at 'drawn by') and distributing for sign off at 'checked' and 'approved' is going to be a very time consuming and inefficient process. Am I missing something?
    Regards & thanks again,
    David.

  • Deleting roles, expiring users and locking them

    I have list of users (100s of them) who have not logged in system for quite some time.
    Now I have to remove roles assigned to them, expire them and lock them.
    Is there a faster way to do it. I am asking this becuase there are 100s of them
    Thanks

    If you place a termination date on the user there is no need to lock or remove roles.  The user will not be able to access the system.  Placing a term date is the best way to keep a user out.  Just locking them a user could be unlocked easily and without thought but if a user has a term date then an administrator will be more likely to question why the date should be removed or changed.
    You can place an expiration date and even a lock by using SU10.  If you download the user IDs to a txt file you can upload them into SU10 and mass change the expiration date of all users at one time.

  • User prefs.Lock file access denied

    Hi,
    Under linux (RH 7.2, kernel 2.4.9-13) w/ JDK 1.4.1-01,
    when I run several of the Swing tutorials (e.g., ListDemo, MenuDemo) and close the window I get this
    error:
    java.lang.SecurityException: Could not lockUser prefs.Lock file access denied.
    at java.util.prefs.FileSystemPreferences.checkLockFile0ErrorCode(FileSystemPreferences.java:926)
    at java.util.prefs.FileSystemPreferences.lockFile(FileSystemPreferences.java:915)
    at java.util.prefs.FileSystemPreferences.sync(FileSystemPreferences.java:723)
    at java.util.prefs.FileSystemPreferences.flush(FileSystemPreferences.java:814)
    at java.util.prefs.FileSystemPreferences.syncWorld(FileSystemPreferences.java:469)
    at java.util.prefs.FileSystemPreferences.access$1200(FileSystemPreferences.java:33)
    at java.util.prefs.FileSystemPreferences$12.run(FileSystemPreferences.java:459)
    I suspect a problem w/ my environment, but am stuck as
    to what. Any advice would be welcome.
    -- marcia

    Every other major application running on your system uses
    the etc directory for it's Preferences... why can't
    Java... The problem isn't that Java shouldn't add requirements for the VM, the problem appears to be that Sun did add requirements, and never told anyone.
    I'm looking at the self-extracting installation instructions for Linux, http://java.sun.com/j2se/1.4/install-linux.html#self-extracting, and nowhere does it state that you must be root in order for the VM to install properly. There is a note about installing to /usr, which you need root access for, but there is no specific requirement that you must be root in order for certain directories to be created properly.
    What about applications that distribute a JVM? Did anyone tell these application developers that their users will have to install their software as root?
    Maybe I'm missing something. If I am, could someone please point me to it?

  • What will best help me view MPEG and other files with OS X ?

    I've downloaded various files for OS X from Limewire but cannot view them as Quicktime needs extra files.
    I cannot view MPEG files nor others and want to know if there's a simple, free programme compatible with OS X that I can download to view these files.

    Download these 4 freeware products and you should be able to view just about any file
    http://mplayerosx.sourceforge.net/
    http://www.xvidmovies.com/mac/
    http://www.divx.com/divx/mac/download/
    http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia

  • Deleted User's Locked files won't open URGENT!!!

    Ok, I had two users on my computer. I trasnfered a file to one of the users accidentally, and then deleted the user. I then realized that I needed a file on that account, and want to get it back. I went into the hard drive, and it says that it is a deleted user, but they are all locked. I went to Get Info and tried to unlock it, and it won't work. I need to get these files ASAP, but nothing seems to work. Please help!

    Select the folder in the Finder and open the Info window. Click the padlock icon and authenticate. Give yourself read & write access, then click Apply to Enclosed Items.

  • Problem viewing .xlsx and .xlsm file in DMS using Display from Archive Link

    Hello All,
    We are using IXOS as a content server for storing the documents through SAP Archive Link.
    We are not storing any documents in SAP DMS.
    The client has an requirement to manage .xlsx and .xlsm documents.
    1. xlsx - We defined a new document class xlsx under SAP NetWeaver ..-> ArchvieLink  and made the required mime and sheet settings. This allows to upload a .xlsx file to IXOS server succesfully (using Check in Archive) link.
    But whenever we try to view the file using "Display from Archive", the browser gives a warning message that the file is in different format than xls. Do you want to still open (Standard Excel application message). On clicking yes, the file opens in .xls format instead of .xlsx.
    The client doesn't want to change the format to .xls. What can be done to preserve the .xlsx files.
    2. xlsm - Any clue as to does SAP ECC 6.0 support this file type for DMS? And if how the config settings are to be done?
    I will be grateful any help.
    Thanks.
    Ketki

    Hi Ketki,
    based on your description I think that maybe SAP note 1289314 could help here and made sure that the local copy also has extension XLSX or XLSM.
    Best regards,
    Christoph

  • View PDF and Word file

    Post Author: vcharles
    CA Forum: Crystal Reports
    Hello,
    I am using crystal report XI with ACCESS 2003, I would like to create a field in my ACCESS table to insert the path of the PDF or word files I would like to view when I click on the report. Is there a way to do this? Whic is the best approach to view a PDF or Word document from the crytal report viewer?

    Post Author: pvierheilig
    CA Forum: Crystal Reports
    Just so I get the first part correct - this is what I understand you to want to do:Add column to Access db, say something like 'FILE_LINK'Have a field on your report that displays the value of the FILE_LINK data for either PDF or DOC's. To do this:Populate the Access db as you'd like, including the file extension.Add the database field to the report.Right-click the field and 'Format Field'.Select the 'A File' radio button.Select the Hyperlink tab.Select the 'X-2' button in the 'Hyperlink Information' area of that same tabbed window.Enter a formula for what you want to be shown.  To show 'somefilename.pdf' on a shared drive, for example, enter this formula:"
    x\" & {database.column}Click the 'X-2' icon with the green checkmark, near the top-left of the window.  Fix any errors reported.Click 'Save & Close' and then 'Ok' on the 'Format Editor' window.Drop/drag the field where you'd like it and you should be good to go. 

  • How to see the Currently loged on user and Locks using Enterpirse manager

    Hello Everybody,
    I want to see using enterpirse manager
    *1.* the currently connected users
    *2.* The locks held by users.
    How to do this in Enterprise manager?
    Regards

    Hello Asif,
    Your and Deepak suggessions do no t show the connected users. Instead If we use the following query,it will give us the names of all users that are currently connected.
    SELECT SUBSTR(s.username,1,15) USERNAME,
    SUBSTR(s.status,1,8) STATUS,
    SUBSTR(s.server,1,10) SERVER,
    SUBSTR(s.type,1,10) TYPE,
    SUBSTR(s.event,1,20) "WAIT EVENT",
    DECODE(s.command,
    1,'Create Table',
    2,'Insert',
    3,'Select',
    6,'Update',
    7,'Delete',
    8,'Drop',
    9,'Create Index',
    10,'Drop Index',
    12,'Drop Table',
    17,'Grant',
    26,'Lock Table',
    42,'Alter Session',
    43,'Alter User',
    44,'Commit',
    45,'Rollback',
    s.command) COMMAND
    FROM v_$session s, v_$session_wait w
    WHERE (s.sid = w.sid)
    AND s.username != 'SYS'
    ORDER BY s.username;
    Best Regards

  • Viewing dng and jpg files

    How do you get LR4 to display both dng and jpegs seperately instead of as dng + jpg with the same file name.

    Disclaimer:  The following applies to WINDOWS EXPLORER.  I don't use Bridge so I don't know if it's applicable at all to Bridge.
    Adobe does not provide a codec for viewing Canon raw files as thumbnails.  Canon has one for free but it only works on a 32 bit Windows system.
    Early this year I found a free download for displaying raw file thumbnails that works on an x64 Windows system.  Since that time the author realized there's a real demand for this software and has started charging for it.  In any case, I find it works very well.
    http://www.fastpictureviewer.com/codecs/
    -Noel

  • Viewing avi and wmv files with QT 10.1 and OS 10.7.4

    In the last couple days, I think since I installed the last upgrade in the OS, my QT is 'unable to complete the process' of opening wmv files.
    Months ago, I think after I upgraded to Lion, QT stopped allowing me to view avi files.  The file opens, and I can scroll through the content, but to 'play' button doesn't work.  I can still view those files using DivX Player 8.2.2.
    These are all files that used to work just fine with QT.  Is there anything I can do to restore this functionality to QT?

    Use only QT 7 for those.
    Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac and operating system, of:
    Flip4Mac WMV Player from  http://www.telestream.net/flip4mac-wmv/overview.htm  (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from  http://perian.org/
    You should read this support page  http://perian.org/#support   in case you need to delete older codecs.  In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them), particularly any DivX extension to Safari. However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from  http://www.divx.com/en/software/mac

  • Adobe Content Viewer app and .folio file

    I created and published a .folio file on my Web server.
    My boss downloaded the free Adobe Content Viewer app from iTunes for his iPad. When he tries to open the .folio file from his home screen it goes online to a browser and just shows a grey screen with an icon for the .folio file, its file size and nothing happens.
    Am I missing something? The same .folio file works fine on my desktop version of Adobe Content Viewer. How do I get it to work in his app?
    Thanks.

    Found some other threads. Is this right?
    1. Create my .folio file.
    2. Host on my free Acrobat.com account.
    3. Get viewer to get their own free Acrobat.com account and share doc URL with them.
    4. They download file and view in the free Adobe Content viewer app for iPad.
    Would check, but I don't have access to an iPad with live internet connection (yet).
    Thanks.

  • How to analyze/view *.run and *.out files?

    Hi guys,
    I used tttracer_Win7 tool to trace an exception of my addin when it was integrated to Outlook 2013. And the output file of the tool had 2 files: *.out and *.run, but I dont know how to view the files. Tried Google Search, and did not help me. The
    tool also could not read that files.
    Could you give me some comment, or suggest about some tool that can do that?
    Here is the UI of the tool, I hope you guys used to use it.

    Hello Phuc,
    I'd suggest creating a log file instead. Thus, you will be able to find the cause of the issue easily. For example, you can use log4net library.

  • Eliminating a user and retrieving files

    I had a problem with Mac OS refusing me access to files on my hardisk, saying that I did not have the necessary authorizations. Following technicians' advice, I ran the disk utility which repaired a lot of 'permissions'. However, the problem persisted and I was advised to create a new user identity.
    I created a new identity and transferred all my files (documents & images) created under the old identity an external hard disk, and then copied them back onto the MacBook Pro disk under the new identity.
    However, some of the files cannot be opened using the new identity (I get messages saying that the file is damaged or incomplete or that I don't have permission to open the file or that it is in read-only mode).
    Is there a simple way of transferring all the files created in one identity to another identity?
    Many thanks in advance for your help
    Garry
    MacBookPro   Mac OS X (10.4.6)  

    open a terminal (go to Applications, then to Utilities, just there...)
    write this commands in order and then enter
    1. cd /Users
    2. ls
    you will now see all the files under /Users. Your new username must be there. let say it is "newuser"
    4. sudo chown newuser.newuser newuser -R
    if it does not work, post it here, I will try helping you...
    MacBook Pro 2.16,ibook g4 1.33, Compaq evo n800v p4-M 2.0   Mac OS X (10.4.7)   and 1/2 ipod nano black

  • Storing and viewing powerpoint and pdf files on my ipod touch?

    Dear All,
    Do any experts out there know how I can easily store and view ppt & pdf files on my ipod touch 8GB?
    I only need to view them.
    I have read else where that you can copy them in to safari bookmark, but this can destabilise safari(?).
    Is there a simple way I can just drag, drop and view?
    Any free apps available especially for this purpose?
    Thank you very much for your time and help.
    Richard UK

    Any free apps available especially for this purpose?
    not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Maybe you are looking for