View using Material master,Vendor master and PO tables

Hello folks.
There is a requirement to create view using material master tables ( MARA,MARC,MARD,MAKT & MBEW ) , vendor master tables ( LFA1 & LFB1) and
Purchase order tables ( EKKO & EKPO tables).
I have created the attribute views for material and vendor master tables separately.Now I am thinking about the following design pattern.
1. Join the material master master attribute view to EKPO table using the inner join to create a analytic view1.
2. Join the material vendor master attribute view to EKKO table using the inner join to create a analytic view2.
3. Now create calculate view using join to combine analyticalview1 & analyticalview2.
Please suggest me the best optimize pattern and am strange to SAP HANA. Please also clarify the following doubts.
1. What is the role of system supplied default aggregation node?
2. How can I use Union node in the calculation view in the current requirement because people/documentation always suggesting using of Union than Join?
Thanks & Regards,
Suresh Kuturu

I have managed to create the Analytic view as per my requirement.. No need to use calculation view in this case..

Similar Messages

What Function Module can be used to create vendor master data in SAP R/3?

Hello -
I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
Rich Wortmann
<< Personal information removed >>
Edited by: Rob Burbank on May 14, 2009 10:43 AM

Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
Thomas

Standard iviews for Customer Master, Vendor Master etc. ??

Hi all,
Do we have standard SAP providecd iviews for creation and change of Customer master, Vendor master, Asset Master, GL Account, Cost Center, Cost Element etc. in R/3 from the portal??
We are using mySAP ERP 2005. Please let me know if there is any such possibility. If yes, if some one can give me some links to access the same, that would be great.
Regards,
Narahari

Hi,
You can get details in table KNA1 in transaction SE11 or SE16
Else get field value "ADRNR" from table "KNA1" and pass it to table "ADRC" and get details.

Regarding segments in GL master, Vendor master, customer master

Hi
friends
can any one tell me how many segments in GL master, Vendor master, Customer master.. I give your points...
Thank you
[email protected]

Hi Kumar
in GL - Chart of accounts level and company code level
in Customer - Sales org level and company code level
in Vendor - Purchase org level and company code level
Thanks
Ashok
Assign points for useful answer

Cust master,Vendor master standard LSMW prog name?

Can anyone send LSMW Customer master,vendor master standard programs name?

Hi,
You can select the <b>program/object name</b> from the <b>Maintain object List</b> only.
Go thru these links for detail LSMW.
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Reward points if this helps.
Manish

How to use copy default values for material from vendor master in Account Group

Dear all:
In define AccountGroup for vendor ,there is a field named DURAS which means default values,who can tell me how to use it?
Any informations are appreciated!

Hi Katherine,
I have tried using default value as B in the customizing
If i maintain default values in the vendor master record, it will automatically adopt in the purchase info record.
Here i tried using sales person & telephone no field in vendor master record & it automatically adopts to purchase info record.
Region sales person and telephone no i have maintained in vendor master record, it automatically fetches to info record for the particular account group. I am not sure if there is any relation between vendor master and material master record.
Regards
Subbu.

What are the important views or field in vendors master record

All,
We are converting two different companies into our SAP. We are at blue printing stage. I was assigned to gather vendor master data requirements in SAP. I sent them all the fields that we are currently using in SAP. I sent them a template of General, Company code data and purchasing views. The legacy team is coming to meet with our it team one to one to discuss the importance of the fields. Now my team manager asked us to submit a presentation about all the questions we should be asking the legacy team as well as the important information we should be discussing from SAP point of view. Can someone guide me here please. It's important.
Thanks,

Hi The task is pretty simple. You would need to create a mapping from the legacy data to SAP data. You would go through every field of the legacy data and identify which field it will map to. there is nothing like important field. Ideally you would get all the fields. Identify the recon account that the vendors should go to.
Hope this helps
Points will be appreciated.
Regards,
Zaid Azam

Release process for Material Master, Vendor master creation

Hi Sap Gurus,
We currently have a business process where in a particular User / Dep't collects the field values for Master data creation. the requirement is untill an verifier (releasing authority) releases it, the material must not be put to use.
is there an release process which could be built for Master data creation in SAP, please suggest how to go about to meet this requirement.
some Options iam thinking are.
Locking or Blocking for use Initiallly by the creator, and the verifier Unlocks or Releases it.
1) Say the creater creates and locks the material master after creation. but i did not find any authorization object for Locking / blocking the material separately,so the is problem what if the initial user creates the material and did not Lock the same, this is the issue with this solution
can this be configured / automated that, with the Creator User ID, the material getting created always gets to the Locked status / Blocked status.
and the same material is Unlocked by the Verifier User ID.
Please suggest how this can be done with Fool proof solution, May be with Standard or slight development if required
Thanks and regards
Priya S

Thanks for your quick reply rahul,
But the Issue is there should be 2 People for the complete creation of Material master. one should place the values and the other should verify the value and release.
The material should not be created or put to use untill the it is released by the Verifier.
and i could not find any authorization object resticting the creator for blocking or locking the material master, with out actually creating the same.
( the creator should only have the authorization for blocking or Locking the material, or when ever the material is getting created by the Creator it should go to the Locked status or Blocked status)
The releaser can then go and release the same. wold expect the nearest possibility with out big development.
and if it is a development please explain the same.
Thanks and regards,
Priya S

Customer Master / Vendor master Creation

Hi Folks,
I have a requirement that the whenever Customer / vendor is created or changed, then there needs to be a mail sent for the same.
We are currently using the user exit : EXIT_SAPMF02D_001 for customer creation and user xit : EXIT_SAPMF02K_001 for vendor.
The issue :
When the new Cust / Vend is created, the user exit is called. The issue is that the "Customer number" / "Vendor number " is blank as the number is generated by the system after the user exit is over. So the mail sent is having Blank Ven / Cust number which is not desired.
IF anyone knows any other User exit / Badi that can be used for this purpose. Or if there is a business object for the Customer abd vendor master, whose event is raised by the SAP transaction when Cust / vendor is created with the customer number passed to the event, then kindly let me know. I can then create a workflow for the same.
P.S: There is no issue when the customer is changed as the customer number comes in the above exit.
Thanks and Regards,
Anuj.

Hi,
I think you can use Business transaction events for this.
BTE 1320 and 1321 for Customer Master
BTE 1420 and 1421 for Vendor Master
And FYI,
http://help.sap.com/saphelp_46c/helpdata/en/63/ed2c7dd435d1118b3f0060b03ca329/frameset.htm
Hope this helps..
Sri

Using dbms_xmlgen.getxml with new and old tables in triggers

Is there a way to use getxml against the data stored in the new and old tables in a trigger? Simply doing this:
Xml_Variable := dbms_xmlgen.getxml('Select * from New');
Does not work.
Edited by: user13302591 on Jun 16, 2010 1:16 PM

user13302591 wrote:
How would I pass the information from the :new and :old to getxml?What are you trying to do? You could use, for example:
XMLELEMENT("old",:old.column_name)
XMLELEMENT("new",:new.column_name)SY.

Customer Master Vendor Master

Hi
I would like to know if I have customer who happens to be vendor as well. What settings in customer master are to be enabled to handle this scenario.
Regards
Kalpesh

Hi Kalpesh,
First goto T.Code XK01 and create a vendor.
A number will be generated.Next goto XD01 and enter the same number externally and then goto control data tab in general data.This process is if you want to be the same number for both.
Enter this vendor number here for the field vendor.
You can link to already created one also using XD02 T.Code.Goto Control data tab in general data and then enter that vendor number here for vendor field.
Similarly maintain this customer number in Vendor also using XK02 T.Code in control data tab for the field Customer.
This completes the linking.
Regards,
Krishna.

Please help - Can not use stored procedure with CTE and temp table in OLEDB source

Hi,
I am going to create a simple package. It has OLEDB source , a Derived transformation and a OLEDB Target database.
Now, for the OLEDB Source, I have a stored procedure with CTE and there are many temp tables inside it. When I give like EXEC <Procedure name> then I am getting the error like ''The metadata could not be determined because statement with CTE.......uses
temp table.
Please help me how to resolve this ?

you write to the temp tables that get created at the time the procedure runs I guess
Instead do it a staged approach, run Execute SQL to populate them, then pull the data using the source.
You must set retainsameconnection to TRUE to be able to use the temp tables
Arthur My Blog

Workflow for Material Master and Vendor Master Creation

Hi
Has anyone mapped creation of Material Master & Vendor Master through SAP Workflow.
Seek your valuable inputs.
Best Regards
--Vikas

You may not get the complete standard form which will match this functionality. But you can develop your business logic in custom code for fetching the data and the interface and use the standard templates for layouts if any template matches your requirement. You can see the complete lest of templates in : "transaction SFP->Form->Layout->Tools->Template Manager
Most of the common templates are available here.

Material Master,Vedor Master and Info record

Hi
When we create all these record, some of the fields are populated from one an other, so if we change these common field in one record, will it be changed itself in other record?like purchasing value key in MM and Info record are common so if we change this one in info record,the change in MM will be done itself or not and if not why?

Hi,
Let me take one example of reminder days only.
Now material master's reminder days are specific and limited to that material only. for ex for material "007" reminder days are 3,6 and 9. that is in general.
but when that material is provided by X vendor than reminder should be 4,7 and 11..than what?
that should be maintained in info record. so info record is one level up for data maintenance. so if there is no info record, reminder days will be take from material master that is first level. but if you have maintained info record , means you want some specific data for that material when it is provided by any specific vendor..than reminder should be taken from info record.
when data is adopted , first system checks info record than material master/vendor master.
so when you create info record, some data are taken from master data ( material master/vendor master) but you can overwrite it base upon your need.
than that data is fixed for that material n vendor..it doesnt change if you change master data...
hope this solves your query..
reward if useful.and revert if any doubt
regards

LSMW Vendor Master Using BAPI

Hi,
Which BAPI is used for uploading Vendor Master including withholding tax details and bank details through LSMW Method
or please suggest me the direct input program for the above details mentioned
Method : LSMW
immdetiate solution is appreiciable
Thanks

Hi,
You can use message CREMAS for your requirement..
Regards,
John.

View using Material master,Vendor master and PO tables

Similar Messages

Maybe you are looking for