View Window -- Build and Output

Regardless of what I do, I am not able to see the "Build" and "Output" windows on my Workshop IDE. I tried lauching them from the menu: View - Widnow - Output; View - Window - Build.
I also tried using the key combinations, Alt+0 and Alt+5 respectively.
Getting back these two windows is essential for me to debug and see compilation errors.
Thank you for your help.

Even I am having the same issue! I can't bring back the "output" and the "build" window on Workshop.
Pleas let me know if anyone knows the reason for it..
My email: [email protected]
Thanks
-Vinay

Similar Messages

  • How to view the input and output layouts created in the planning folder?

    Hi all,
    How to view the input and output layouts created in the planning folder in the bw 3.5?
    Thanks
    Pooja

    Hi,
    You can refer to this link. How to create planning folder and executing the planning folder.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
    Hope this helps

  • Controller for View, Window, Interface, and Configuration Cannot Be Created

    Hi All,
      In our  Web Dynpro ABAP applicaton we  have a window and when we edit the conent of window and try to press "Cancel" button we are getting below error.
    Controller for View, Window, Interface, and Configuration Cannot Be Created
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: GET_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: GET_ACTION_FROM_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================
    Do any one have idea regarding this error.
    Regards
    CB

    Hi,
    Sounds bit strange to me, if you edit your window and do not want to save your changes then i would not expect this error. assuming that the component does not have activation problem.
    Just for making sure.
    I assume that your problem is on design time and not runtime.
    If it is a design time and problem still exists, try to delete this window, save ,activate and then recreate this window,embed your view(s).
    If it is runtime problem then i would suggest you to do debugging and find out where it is getting this error.

  • MacMail- No viewer window and cannot Quit- menu choice greyed out- 10.5.8

    The problem occurred after I connected MBP to iBook G4 running 10.4.11 via Firewire/Target Disk Mode.
    In that process of transferring some files from iBook to MBP, I was also putting some iBook files into MBP trash and emptying.
    When done with the TDM, I did drag the icon to trash on the MBP before I unhooked the FW cable.
    Now when I try to open Mail on my MBP, icon bounces twice but no viewer window opens and all options in pulldown menus are greyed out. I can only force quit the program.
    In the User/Library/Mail folder I can see all the correct mailboxes.
    I do not have an archived User/Library/Preferences/com.apple.mail.plist file.
    I have seen online where this problem occurred in OS 10.5 but I am running 10.5.8.
    Thanks in advance for your help,
    Barbara
    Don't know if this is relevant... I am currently running Permission Repair in Disk Utility and it is taking forever... Countless number of files where "Permissions Differ" and it is still running through the process after several hours. All are in the Applications folder.

    Use Console.app to see if Mail is posting any error messages when you try to start it.
    AK

  • Views on CF Report Builder and Crystal Report

    Dear all,
    I would like to get your opinions on CF Report Builder and
    Crystal Report.
    As we all know, CF Report Builder is a new reporting tool.
    But I find it very difficult to design a complex report maybe due
    to limitation in its functionalities. Sometimes the tool shutdowns
    by itself without any warning and reason. But the output is nicely
    presented on a flash paper / pdf and it can be run on non-MS
    platforms.
    On the other hand, Crystal Report is a more matured product
    but runs only on MS platform. It is very easy to use and very
    powerful. I have been using it for almost 10 years. But the output
    is not nicely presented on the web browser unless if we purchase
    Crystal Report Enterprise to generate the report which is very
    costly.
    Can you all share your views? I need to make decision which
    tool(s) to use. Really appreciate it.
    Cheers,
    Keiko

    Hi Keiko,
    Yes, CF Report builder is new and initially there was few
    issues with this. But I guess now it's good after hotfixes.
    Well, I am using CF Report Builder. It's good for me. You can
    also design and develop complex reports, that depends upon the
    query you are writing. You can also add subreports to your main
    reports.
    Mainly CF Report is platform independent and you can also
    generate reports in PDF, EXCEL and FlashPaper.
    Crystal Report is no doubt is very good, and it's there for
    long years. I agree you can create complex reports with this, but
    you also can do the same in CF also. You are using this for last 10
    years, so I guess you should try something new and that is CF
    Report Builder and you can judge then.
    I am sure you will have fun with CF.
    Thanks
    Sankalan
    (www.mindfiresolutions.com)

  • Build and deploy windows service

    I want to build windows service application through build definition and deploy it through Release Management.
    Build definition creates _PublishedWebsites and no exe is created.
    I believe Create service component in Release Management requires path (BinPath) where exe is located.
    How can I achieve this? Please guide.

    Hi N-SHAH,
    I'd like to know whether you have build you windows service project successfully using TFS Build, and what's the version of TFS and Team Explorer(accompany with VS) you're using. If you cannot build the project successfully, please check the build
    log. Make sure you can build before the deployment using Release Management. I use TFS 2013 Update 2 and have a try to build windows service project with TFS Build and it builds fine, the execution file can be generated normally.
    When use Release Management for the deployment, you can create a Release template. Then set the build definition to the one that can build your project. And also configure path to package to point to drop location, add needed tools of "windows
    service" to your release template to make it available for your deployment. Check this
    page for more informatino about Release Management tools. And this
    page for more info about Automate deployments with Release Management. And this
    link
    might help for managing your release.
    If you don't want to use Release Management, you can also use TFS Build to deploy your windows service project. Check this
    link for more information. Or using MSBuild and then integrate with TFS Build to do the deployment,
    here
    is the related process.
    Best regards, 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Mail won't display the viewer window, and it will not close (force quit does not show in menu bar).  Can't shut down to reboot because the open mail program prevents it.   Any advice?

    Mail does not show the viewer window even when new viewer window is cliced.  I tried to close mail and reopen, but it will not close, and force quit option does not appear in window bar.   I tried to shut down the computer and reboot, but it cannot close because of open mail program it says.    Help!

    Many thanks.  Once I was able to close mail, it reopened and behaved quite normally.  Thank you.  I'll remember the option quit for force quite!

  • How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

    How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

    Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
    Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
    *http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • "Cannot use adobe reader to view pdf in your web browser" error in Windows 7 and Acrobat pro 8.1.7

    I get the error "Cannot use adobe reader to view pdf in your web browser.  Reader will now exit.  Please exit your browser and try again" in Windows 7 x32 and Windows 7 x64 with Acrobat pro 8.1.7.  This happens when trying to open  a PDF file in Internet explorer 8.0.760 or when I open a PDF in Quickbooks 2008.  If I answer ok or cancel the file opens normally.  If I open acrobat 8 first then the pdf files open as expected.  I also tried a copy of Acrobat reader with no difference in the outcome.  Since this happens on two different computers one fresh copy of windows 7 x64 the other an upgrade to windows 7 x32 and they used to work before the change to windows 7, I assume there is some kind of incompatibility with windows 7 and acrobat.  Is this a known issue and will it be fixed in an update to acrobat in the near future?

    tvandersluijs - I'm sorry if that screwed up your machine however:
    1. What version of Adobe Reader are you using because as you can see the registry entry is for Adobe Reader 9, if ur using Adobe Reader 8 then u need to specify ur version as PAllens entry suggested - "E.g. "C:\Program files\Adobe\Acrobat [version]\Reader\AcroRd32.exe""
    2. I've used this solution significantly because I have come across this specific issue for multiple users.
    3. All the registry entry does is tell Windows what program to use by default to open/view PDF documents.
    My intention wasn't to screw up ur machine or anybody elses as I said I've used this solution many times however what I've should gave is the disclaimer to backup ur registry before u make mods so u can revert back in case. Also the ony other thing I can think of is that this solution was for Windows XP using registry editior 5, I'm noticing that the title of this thread is Windows 7.

  • SCCM 2012 R2: Build and Capture - Windows 8.1 prompting for network

    I have upgraded my SCCM 2012 SP1 (CU2) to SCCM 2012 R2 and I am attempting to Build and Capture Windows 8.1 Enterprise. Everything is perfect except for the OS prompting for a network selection during the process, if I click "next" on that screen
    the Capture finishes without incident. The same is true of the Deploy as well...
    Is this a bug from my upgrade?
    Portland Public Schools / Systems Administrator II

    Hi LillonelC
    Can you point out how and where to do this?
    When capturing with MDT 2013 on VMware I do not see this, naturaly, since the "machine" only has one network adapter.
    But when deploying to a Laptop I get the wireless Setup screen...
    On beforehand Thank You!
    With kind regards
    We aren't using MDT but what we did was create a package called Windows 8.1 - Compnents. In it  placed a file named "32Bit-Unattend.xml" and 1 named "64Bit-Unattend.xml". 
    During the capture in the "Apply Operating System Image" I put a check in the box "Use an unattended or Sysprep answer file for a custom installation". The package was Windows 8.1 - Compnents the File name was "32Bit-Unattend.xml".
    I did the same for 64-bit and used the 64-bit version.
    Here is content of the 32-bit file:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                    <HideLocalAccountScreen>true</HideLocalAccountScreen>
                </OOBE>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x86/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    Here is the content of the 64-bit file:
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                    <NetworkLocation>Work</NetworkLocation>
                    <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                    <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                    <HideLocalAccountScreen>true</HideLocalAccountScreen>
                </OOBE>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim://SERVERNAME/e$/osimages/win_8.1_x64/sources/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    If that doesn't help I can try to clarify it a bit further.
    PS You won't need to do this for the deploy, only the capture.
    Portland Public Schools / Systems Administrator II

  • I am using CS6 InDesign suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and

    I am using CS6 InDesign on a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    NO way.
    Mylenium

  • When in Adobe Bridge and trying to create a web photo gallery, under the windows menu and then the workspace menu there is no output option.  Where is it?

    When in Adobe Bridge and trying to create a web photo gallery, under the windows menu and then the workspace menu there is no output option.  Where is it?

    You haven't provided any sensible, meaningful and detailed information about your setup.
    If you gave some sensible, complete and detailed information, someone may be able to help you, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, etc.
    There are no clairvoyants or mind readers here.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Why are iTunes, View, Window, and Help menu items disabled?

    I am frequently encountering an issue in iTunes 10.5 (141) where all the menu items in the iTunes, View, Window, and Help menus are disabled (greyed out). Why is this happening and can it be stopped?
    I've seen this issue on different Mac OS X 10.7.2 machines. It seems to occur during playlist manipulation, where I'm making new playlists, adding items to them and editing them and the items. In the worst cases, I'm forced to quit and restart iTunes, although I have to quit by using the context menu option in the Dock as the Quit option is disabled in the application.
    I'd appreciate any advice on workarounds for this that don't involve quitting and restarting iTunes.

    I'm also having the same issue.  It was happening with 10.5.1 and now still with 10.5.2.  I'm using a 2008 iMac running 10.6.8.  I do not use iTunes Match.  This seems to happen for no apparent reason i/o/w, I can't determine a pattern as to when it happens, but it occurs about once in every 10 times that iTunes is open and it seems to happen after it's been open for a while, but again, no particular pattern. 
    Sometimes, all the menu items are grayed out, and other times, 70% of the menu items are grayed out.  I can still use the other functionality in iTunes, but must must Quit from the dock (it quits gracefully and no Force Quit is necessary).  Relaunching restores eveything to normal for about a week. 
    I work with technical diagnostic issues and can usually pinpoint a problem, isolate an issue, or determine a pattern, but this one has me stumped. I thought 10.5.2 might fix it, but no.  Maybe 10.5.3?

  • How to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area

    how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
    ananya

    Hey Ananya,
    I believe what you want to do is possible, but it will not be
    easy.  If you want to add a scroll bar that will scroll the graph
    back and forth but keep the axis set, you would want to add a
    horizontal or vertical scrollbar.  Then you would create an event
    handler for the scroll event.  You would have to manually plot
    different data within this scroll event.  Unfortunately, there is
    not really a built in way to do this with the Measurement Studio plot
    control.
    Thanks,
    Pat P.
    Software Engineer
    National Instruments

  • Why does my pdf file open in 'windows picture and fax viewer'?

    Anytime someone sends me a pdf file, when I click 'open', it automatically opens up my 'windows picture and fax viewer' and of course, I get nothing. So, in order to read a pdf file, I must first save it, then go into my Adobe Reader, and open it from there. Can anyone tell me how to change that? It's only happened since I upgraded Adobe Reader to 8.0. What am I doing wrong?
    Thanks

    Right click the pdf file and click on Properties. In the General tab click the Change button and associate the Adobe Reader 8 program to the pdf file. Click Ok, then Apply.
    I assume the connection to this forum is that the pdf file is a Lighroom generated slideshow.

Maybe you are looking for