Viewer Builder and Title ID

This is my first time publishing a magazine using the Viewer Builder.
Which ID should I use in the first window inside the Viewer Builder, ther it asks for "Title ID"?
Can anyone help me?
Thanks
Leikny

I ment in the Accont Administration where I give trysilmag12  an application role. What ever, I'm past that "level" now
Its a Multi-issue App I wont to create, and I have read and watched a lot of videos and iformation, but I have not find exactly information about the Provisioning step in Viewer Builder.
And I see that I nedd certificats. I have create an developer.p12 anda a distribution.p12 certificate (but if they are right I dont know ...)
Is it a place where I can find more information or can you tell me a easy way ;-)

Similar Messages

  • Just needed some clarification regarding the Viewer Builder and actually publishing your App...

    If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

    Hi Joshua,
    When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
    After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
    With kind regards,
    Klaasjan Tukker
    Adobe Systems

  • Viewer Builder and Bundle IDs

    Hi everyone,
    I just added another application into my itunesconnect. I used different bundle id and in order to do that, I created another apple id in apple id section in developer website. Then I named my new bundle id, came back to viewer builder, put all the certificates and rest of the stuff there but once I went to the last page, it showed the same bundle id like my previous applciation. Can anyone tell me how can I see my new bundle id in viewer builder page?
    Many thanks,
    [email protected]

    I ment in the Accont Administration where I give trysilmag12  an application role. What ever, I'm past that "level" now
    Its a Multi-issue App I wont to create, and I have read and watched a lot of videos and iformation, but I have not find exactly information about the Provisioning step in Viewer Builder.
    And I see that I nedd certificats. I have create an developer.p12 anda a distribution.p12 certificate (but if they are right I dont know ...)
    Is it a place where I can find more information or can you tell me a easy way ;-)

  • Does Viewer Builder's Bundle ID and Apple's SKU need to be the same?

    I'm working with Adobe Viewer Builder and iTunes Connect and I've realized my Bundle ID and apple SKU (com.example.example) are not the same. Will this create a problem when I submit the app to apple? And is there an easy way to edit and change the Bundle ID in Viewer Builder?
    If this is a problem, how do I delete the app from Viewer Builder? The delete button in Viewer Builder in inactive, I can't press it. I've unpublished the folio from folio producer but I can't seem to remove my app from Viewer Builder.

    The Bundle ID is generated automatically when you create the App ID on the Apple developer side. For each app you create, you need to use the iOS Provisioning Portal to create a new App ID. Then, after you create the app using Viewer Builder, you use iTunes Connect to start the app submission process.
    Unpublishing folio will not remove/delete your build in viewer builder. If you have Professional or Enterprise edition you can edit your build by clicking on Edit button in viewer builder.

  • Single Edition and Viewer Builder (how to launch the VB)

    Hello
    just bought (one hour ago) a licence for single edition.
    so i got the email telling me
    1: i gotta connect to https://digitalpublishing.acrobat.com
    2: make sure i got the latest version from the viewer builder
    and here's the problem: the "Viewer Builder" section is still grey, I got no access to it and then can't do the following
    3: launch the viewer builder etc.
    4: in viewer builder, chose etc.
    can someone help me please ?
    maybe i just have to wait longer

    okay thanx again.
    PLease note that this tutorial may be confusing then because Mr Fleming does not specify it has to be a mac, and his computer does not look like a mac
    http://tv.adobe.com/watch/learn-digital-publishing-suite-single-edition/digital-publishing -publish-singlefolio-to-ipad/nother question regarding the publishing
    Another question regarding the publication progress, at 2'35'' Mr Fleming talks about "certificates that I've built": what is this ? HOw does it work ?

  • No Folio File field in Viewer Builder?

    For some reason I do not have a field to associate a folio file to a viewer in the Viewer Builder. This greatly impairs the user experience.
    I'm using Indesign 5.5, have downloaded the most recent updates from the DPS site and have cleared the cache of my browser. I've also released an app in pre-release but this is the first one in the new interface.
    The documentation in the DPS help section references the Folio File field in the Basic Settings panel of Viewer Builder but I've navigated through the Viewer Builder and see no place to actually designate the folio to be built into the viewer. What am I missing?
    I can see where folios published to the account will automatically populate the viewer and from a developer standpoint maybe there isn't a need to associate a specific file to build and release the viewer itself, but the app for this viewer (that was successfully built in the DPS VB with confirmation as completed) was rejected by Apple because from their point of view it's an app with no content (no actual folio files for an end user to look at.)
    Thanks!

    Thanks for the response Bob.
    Yes, multi-folio viewer is what I need for a series of digital magazines. Sorry, in pre-release the multi-folio viewer was built and pointed to a folio file as with a single viewer. The new release is fantastic, I'm not nostalgic. Just trying to troubleshoot.
    After your post I assumed then that the viewer must automatically read what's been published and auto-populate the viewer. The problem was that I wasn't seeing the folio in the viewer on my ipad (loaded with iPhone Config Utility) but was seeing it through the generic Adobe Viewer. I checked certificates, settings, etc. in the viewer and everything checked out fine. I then went through publishing options.
    What I found was that when the folio is set to free, it is viewable in the custom viewer we've created. When it is set to retail (we are planning on selling this issue) it is not. Has anyone else experienced this? Have I configured soemthing wrong? I re-checked documentation and don't see any additional settings needed for retail release. Is the viewer expecting some additional info from the App Store to process the display icon of the folio for purchase?

  • HELP! Viewer builder won't accept my adobe ID!

    I'm using the same Adobe ID (which is the only one that I've used since the beginning of the process) to open the viewer builder and everything in DPS and this screen won't accept it. Is this a common issue? I already uninstalled it and installed it again and it doesn't seem to budge.
    I'm really desperate, since I need to have this uploaded ASAP.
    Any pointers? I appreciate your collaboration.
    thanks!
    -d

    http://forums.adobe.com/message/4445995#4445995

  • SIGNING FAILURE (Viewer Builder)

    We are trying to generate the Distribution Viewer (.zip) from the Viewer Builder and are running into an issue.  This happens at the end of the export process when the link for the .zip is clicked. The developer version (.ipa) works fine.
    I have gone back to the Apple Developer Center and revoked all certificates and created them from scratch, along with new mobileprovision files and private key (p12). The error continues to persist.
    Is there any information you can give us on what may be causing the Signing to fail on the Distribution file?

    iIs there anymore updates on this? I'm having the same problem. I get a signing error when i try to get the ipa and zip. It worked the first time but i had to chnge one thing and have never been able to get past the signing error at the end again.
    I've went through every step multiple times, revoked all certificates and provisions, cleared out the keychain and basically re-did the whole process more times than i can count. Everything matches up as far as i can see but I still get the signing error which is in no way specific to what exactly is wrong with the p12 files. I do other apple development on the same machine and dont have problems publishing.
    So as theres no support system and the company have already paid for a single lisense which at the minute is used on an app we cant access does anyone have any idea how to solve this?

  • Viewer Builder 1.5.1 with Newsstand support is now available! Download Details

    Hi everyone,
    I am delighted to announce the release of Viewer Builder 1.5.1. What's new in this update? iOS 5 Newsstand support! Lots of you have been asking for it and we are pleased to provide it in advance of Apple's iOS 5 release on October 12th. In the interest of releasing this update quickly I have shared the new client installer here:
    https://acrobat.com/#d=VUF3T7VQuexRvtltwp34Yg
    It will be available on the Digital Publishing Portal (https://digitalpublishing.acrobat.com/app.html) from midday PST.
    Please note that in order to create a Newsstand-capable app you must create a Subscription Viewer in Viewer Builder and it must be a V15 Viewer.
    Jonathan Ferman, Viewer Builder Product Manager

    Hello,
    i have a problem:
    Dear developer,
    We have discovered one or more issues with your recent delivery for "XY". To process your delivery, the following issues must be corrected:
    Invalid Code Signing Entitlements - The signature for your app bundle contains entitlement values that are not supported. For the com.apple.developer.ubiquity-container-identifiers entitlement, the first value in the array must consist of the prefix provided by Apple in the provisioning profile followed by a bundle identifier suffix. The bundle identifier must match the bundle identifier for one of your apps or another app that you are permitted to use as the iCloud container identifier.
    Specifically, value "D000000000.*" for key "com.apple.developer.ubiquity-container-identifiers" in viewer is not supported.
    Invalid Code Signing Entitlements - The signature for your app bundle contains entitlement values that are not supported.
    Specifically, value "D000000000.*" for key "com.apple.developer.ubiquity-kvstore-identifier" in viewer is not supported.
    Once these issues have been corrected, go to the Version Details page and click "Ready to Upload Binary." Continue through the submission process until the app status is "Waiting for Upload." You can then deliver the corrected binary.
    Regards,
    The App Store team
    Is tehe anyone, who can help me?

  • Viewer Builder, Built-in Single App, Error "Signing Failed"

    Hi All
    I created Built-in Single App, with sample1.zip exported on Dashboard,
    developer-viewer.ipa/developer-viewer.zip is built correctly. (Folio/Viewer version is V21)
    Than I changed only from sample1.zip to magazine.zip,
    then developer-viewer.ipa/developer-viewer.zip is Not built, with "Signing Failed".
    I checked provision files, p12 files and others, uninstall and install Viewer Builder,
    but still I can't built a built-in Single App with magazine.zip.
    How to fix this trouble?
    shimoawazu

    I used a sample1.zip for confirming the Viewer Builder settings.
    The sample1.zip is 4pages data of our magazine.
    I built a Built-in Single App with sample1.zip by Viewer Builder correctly.
    Then the folio of magazine was ready, I published it and exported magazine.zip.
    And I just changed from sample1.zip to magazine.zip, but a Built-in Single App is not built correctly with "Signing Failed".
    I deleted the App on the list of Viewer Builder and  re-built a Built-in Single App again,
    the result is same, "Signing Failed".
    I changed from magazine.zip to sample1.zip, Built-in Single App is built correctly.
    What is wrong with magazine.zip?
    shimoawazu

  • How do i test my magazine for free using the current viewer builder?

    I downloaded  the adobe viewer builder, and i entered all my license's. I get to the activation page. Then it ask me to purchase a serial number. When it brings me to the
    site, it prompts me to purchase something for $400.00.
    I just want to test, for free... How do i do that?

    Thanks Bob!
    I think thats insane considering  the adobe content viewer doesnt work on the ipad with the current DPS folios.
    Is there any other alternative?
    Would it be better just to use the xcode apple ap?
    Thanks
    - Joe

  • Views on CF Report Builder and Crystal Report

    Dear all,
    I would like to get your opinions on CF Report Builder and
    Crystal Report.
    As we all know, CF Report Builder is a new reporting tool.
    But I find it very difficult to design a complex report maybe due
    to limitation in its functionalities. Sometimes the tool shutdowns
    by itself without any warning and reason. But the output is nicely
    presented on a flash paper / pdf and it can be run on non-MS
    platforms.
    On the other hand, Crystal Report is a more matured product
    but runs only on MS platform. It is very easy to use and very
    powerful. I have been using it for almost 10 years. But the output
    is not nicely presented on the web browser unless if we purchase
    Crystal Report Enterprise to generate the report which is very
    costly.
    Can you all share your views? I need to make decision which
    tool(s) to use. Really appreciate it.
    Cheers,
    Keiko

    Hi Keiko,
    Yes, CF Report builder is new and initially there was few
    issues with this. But I guess now it's good after hotfixes.
    Well, I am using CF Report Builder. It's good for me. You can
    also design and develop complex reports, that depends upon the
    query you are writing. You can also add subreports to your main
    reports.
    Mainly CF Report is platform independent and you can also
    generate reports in PDF, EXCEL and FlashPaper.
    Crystal Report is no doubt is very good, and it's there for
    long years. I agree you can create complex reports with this, but
    you also can do the same in CF also. You are using this for last 10
    years, so I guess you should try something new and that is CF
    Report Builder and you can judge then.
    I am sure you will have fun with CF.
    Thanks
    Sankalan
    (www.mindfiresolutions.com)

  • Re: Viewer Builder Icon and Splash Screen

    I entered all the icons and splash screens in the Viewer Builder.  Top of screen says "all icons and splash screen images for ipad SD are complete".  However, when I hit the NEXT button, nothing happens.  I did not enter an optional Fonts Zip for HTML file.  Is this why I cannot move on to Provisioning?

    For this reason and for comfort, I made a photoshop template where you can
    put in your illustrator, that generates all icons at once.
    https://github.com/frischmilch/DPS-App-Icons-Template
    —Johannes

  • Single Edition and Viewer Builder

    I'm working on a brochure for single edition release. If I buy the serial number via Dashboard/Store will I be able to download and use the Viewer Builder?

    Anyone can use the viewer builder. You’ll be stopped at the point of actually creating the app and asked for the serial number you purchased.
    Note: The Viewer Builder is Mac only.
    Bob

  • View Window -- Build and Output

    Regardless of what I do, I am not able to see the "Build" and "Output" windows on my Workshop IDE. I tried lauching them from the menu: View - Widnow - Output; View - Window - Build.
    I also tried using the key combinations, Alt+0 and Alt+5 respectively.
    Getting back these two windows is essential for me to debug and see compilation errors.
    Thank you for your help.

    Even I am having the same issue! I can't bring back the "output" and the "build" window on Workshop.
    Pleas let me know if anyone knows the reason for it..
    My email: [email protected]
    Thanks
    -Vinay

Maybe you are looking for