Viewer Builder Error - requires authentication

I keep getting this message when i try to log into DPS in the viewer builder.
I have CS5.5 master suite and viewer builder installed on my work setup and i can log in to accts via the viewer builder there fine.
I installed the viewer builder on my home computer (no CS5.5 suite) and i get this error message for any acct i try to log in to.
Is it a requirement for viewer builder that indesign is installed on the system? might there be some other error causing this, or a workaround?
Thanks-----

I have the same problem.
I just had produce a new single veiwer app to appstore.
After 2 days, when I try to produce another single viewer, I meet that problem, both ipa and zip have the smae error information.
I pretty sure both our "Development Certificates" and "distribution Certificates" was right and I try to re-produce those again and again,
Even our developer and distrubution p12 files.
Do you have any suggestion about this situation??

Similar Messages

Viewer Builder error: 'Signing Failed'

What does the View Builder Error 'Signing Failed' mean when I download my developer or distribution apps from Viewer Builder? The dev IPA and dist ZIP files appear to download correctly despite the message, so what is it trying to tell me?
Ali

Righty, I turn to page 15 of the 'Adobe Publishing Process for iPad Viewer Apps' PDF as provided by my Adobe reseller. All the screenshots are blurred but no matter, I can probably muddle through.
The chapter is headed 'Setting up Apple Push Notification Service (Optional)'. At the end of the introductory text is a paragraph reading: 'Important: If you have already created an App ID and certificates, you can configure your App ID to enable push notifications. You don't need to create new development and distribution certificates. However, you do need to create new mobileprovision files.'
Fine, that's clear. My app exists already: I'm just planning to build an updated version, so naturally I have an App ID. The paragraph has told me that I don't need to create certificates, but I do need new mobileprovision files.
The first section after this is headed 'Creating a push notification certificate'. OK, I shall ignore this section because, as explained above, I apparently don't need to create any certificates.
The next section after this is headed: 'Creating a .p12 APN certificate'. Again, my understanding is that I don't need to create any certificates, so I shall ignore this section too.
Oh... I've already reached the end of the chapter on 'Setting up Apple Push Notification Service (Optional)' and I haven't done anything. How do I create the special mobileprovision files that I'm supposed to need for APN?
Well, this seems odd, so I flip back to page 6 and the beginning of the chapter headed 'Creating Certificates', seeking clarification. In the introductory text is a paragraph that reads: "If you want to enable the Apple push notification service (APN), create a separate certificate that you can upload to the Adobe fulfillment server. See the section on setting up push notifications for details.'
So this chapter is telling me that I need to create a new certificate for APN, but no mention of mobileprovision files, yet at the same time tells me to read a chapter that tells me that I don't need to create new certificates for APN and I do need new mobileprovision files.
I'm afraid I can't make any sense of this, and neither can anyone I send these instructions to. Luckily for us, APN isn't particularly significant for a twice-yearly magazine. But it would be nice to get a handle on it in case we launch a weekly.
Ali

Viewer Builder Error

Hello:
When trying to use the Viewer Builder to compile an app, I've got the following error when selecting the distribution certificate. "Not finding expected label "iPhone Distribution" in this certificate". I attached image so you can check
Thanks for your help..

Hi Ben,
We're using version 1.5. Basically the 1.4 version when launched generated an error. Something about it having been expired, and we removed it and downloaded and installed the 1.5 version.
Additional info:
Mac OSX 10.6.8 run with 8Gb Ram.
By the way...something different... in the provisioning account set-up we requested just the one email for Viewer Builder. Should we be using dedicated emails instead for each publication that'll be iTunes Subscription? (this is our first magazine we're transfering, so we've not got a conflict yet, but could have in future).
Thanks,
Sara
Message was edited by: Sara 2

Viewer Builder Error - SD Portrait Subscription Tile error

I am in the process of moving the first of our Apps to the news stand following Bob Bringhursts Adobe Developer Connection Article - Adding DPS apps to Apple Newsstand.
At the point where I am asked to add Landscape and Portrait Subscription tiles I can locate and add the Landscape Tile - OK no problems so far
I locate and add Portrait tile 331x180 pixels I created and select image but I dialog box is highlighted red and red pop up error - "This tile must be331 x 180 pixels and PNG format".
I have double checked image file and it is 331x180 pixels in PNG format with PNG file extension.
I have created using Photoshop a new 331x180 pixel PNG file and get the same error with this file.
Can get past this point to build the App for submission to Apple
What am I doing wrong?

Bob,
Got confused and had the image orientation wrong 180 x 331 pixels as
opposed to 331 x 180 - the Portrait Tile is actually short and wide
(landscape).
As soon as I flipped the orientation I was able to upload the image and
sucessfully build the App. The App is now in the Aople queue.
Thanks for your help

Trouble with Viewer Builder 1.4

Hello,
Does anybody still works with Content Bundler and Viewer Builder (Drop11 tools)?
I made a folio file with Content Bundler (Beta v0.2.8.16953) and InDesign CS5.
Now I try to create my *.ipa and *.zip files through Viewer Builder (v1.4).
Everything seems to work fine till I try to download the *.ipa and *.zip files.
After a few minutes, an error message appears: "Viewer Builder error, connection failed".
However, two (parts of) files are downloaded, 2,3 Mo each, and nothing to do with them.
My first try was on last friday, trouble remains today.
I tried today using different folio files, same results...
Anybody to answer?
Thanks a lot.

Hey
Did you find a solution ?
I have the same problem !!

Signing Viewer Builder for Android

I have been trying to publish my first app to the Android Market using the DPS Pro Edition & I'm having trouble creating certificates to sign my app in DPS Viewer Builder (version 2.1.130)
Every time I click on the .apk package to download it from Viewer Builder I get an error pointing to something being wrong with the certificate I have created. The error I get is: Viewer Builder Error: Signed output file could not be created- certificates may be invalid. It does dowload a file called unsigned-viewer.zip I presume I can't do anything with this without it being signed.
I've read and followed all that is mentiond in http://developer.android.com/tools/publishing/app-signing.html to create the certificate.
I have tried creating the certificate using Flash and Terminal from my mac running OS 10.7.4
My folios were built using Viewer Version v22
Any help would be very much appreciated.
Cheer
Simon

What version of Viewer Builder are you using? If it's 2.1.x and not 2.2, move Viewer Builder from the Applications folder to the trash and download the most up-to-date version from the Dashboard. Then try again.

UTL_SMTP and SMTP-Error: 530 Authentication required

Hi,
I wanna use the utl_smtp-package and while testing the example of the 9i-documentation, I got the error:
ORA-29279: Permanent SMTP-Error: 530 Authentication required
The only help I found was the sentence in the docu:
530: Must issue a STARTTLS command first. Encryption required for requested authentication mechanism.
What does it mean and how can I avoid this error?
It's true, that my smtp-account of my provider needs an authentication (pop3 before smtp!)
Thanx a lot!
Wolfgang

Hey, Community Girl! I just spent 2 days ripping my hair out over this same issue... The answer was maddeningly simple/stupid. In Outlook... they ASK for your "user name" and "Password" (on the More Settings Tab). What they
actually WANT is your "email address" NOT your "user name", followed by your password. This is easy.. I hope it works the same for you.
In Outlook, go to Tools, Email Accounts, View or Change, click Next. Highlight account information and click change. In the lower right of the page... Click More Settings.
Click the Outgoing Server Tab.
Check the My outgoing server SMTP requires authorization.
Check Log on Using:
User Name: Do NOT type your user name here... type your email address!
Password: Type in your password.
Check the Remember password box. OK
That one small change FIXED 2 days of hair pulling on my part... I hope that does it for you too.
Let me know... I'd be interested if you fixed it. Wish they had actually asked for what they wanted... User Name or Email Address ARE two different things! Good luck!
South Texan, you're a genius! This 530 Authentication error has plagued me for 3 years now; when I call my internet service, they say it's a router firewall issue; when I call them, they say it's not their issue. Changing the User Name field to
my email address instead of my user account name worked!!!!! Thank you!!

Minor error in Viewer Builder pop-up info

Hi,
I noticed a minor error in the Viewer Builder pop-up information. When you create a viewer for the iPad and choose "multi issue with iTunes subscription", you get to complete the Newsstand information. The iPad 1 & 2 Landscape Subscription Tile info popup states that the PNG graphic must be 468x135, but in fact this should be 463x135 (see help file PDF). It's not a big deal, but it can be confusing for some users I think.
Can someone please confirm this?
Cheers,
Bart

I'm able to get out this problem.
I'd one month old installation of designer and workbench. During generating formguide, this set up created mxml with following component for Optional paragraph:
Then I uninstalled the workbench and designer and installed latest 8.2.1_GM version of those and run the formguide again. This time, the produced mxml has the following entry
(Notice the difference from cm.* to cm.controls.*)
As I guess (just a guess),I think earlier it searched CmOptionalParagraph in cm root
(it gave error that referenced component cm.CmOptionalParagraph not found as it was in cm.controls location.)
Now it is able to find that as it searches correct location.

Error in Viewer Builder importing PNS p12 Development Certificate

I am getting an error in the Viewer Builder importing the PNS P12 Development Certificate.
I have already made the certificate for PNS Production/Distribution and for Development.
I was successfully able to import the PNS p12 Production/Distribution Certificate.
When I went to the next field to import the certificate for PNS Development - error says "Not finding expected label 'Apple Development IOS Push Services:' or 'Apple Development Push Services:' in this certificate"
I followed the same process for both PNS Distribution and Development Certificates.
Why would one work and one not? The Viewer Builder gives very little feedback?
Dave

I've been running into this same problem for DAYS now with an app I'm trying to build, except for me it's the production PNS p12 certificate.
I've tried creating a new app several (countless, actually) times. Since I never get to the point where I can save it, I've had to create a totally new app at every attempt—is this what happened to you? And it eventually worked?
I've also installed and uninstalled Viewer Builder a few times now and the same problem occurs.
BTW, I send my certificate to Adobe and they said that it was valid.

Error "Requires authentification" in DPS App Builder

Hi everybody.
WHat is the cause of the error "Requires authentification" when trying to start DPS App Builder ?

GREAT NEWS !!!
We connected our acrobat.com account with Safari.
On our dashboard when we had clicked on DPS App Builder on the left, Safari offered to save us from Apple Developer account !!!!
And when this recording was made, DPS App Builder no longer ask any questions !!
When we connected with Firefox on our acrobat.com account and we clicked on DPS App Builder, any proposed registration had been sought by Firefox.
Effectively, we had not yet registred our company with Apple Developer.
So, the problem seems to be in the registration with Apple, and apparently, DPS App Builder doesn't want to be launched if this registration is not yet made.
Well, now DPS App Builder works normally
Thanks for your help.
I hope that this discussion can help someone else who will be blocked with DPS App Builder.
(PS : can you inform me if this blocking is known in Adobe DPS development team ?)

Error "Requires authentification" in DPS App Builder (2)

Error "Requires authentification" when trying to start DPS App Builder.
This discussion had already start yesterday, but this morning it is impossible to reply in this discussion (??!!!).
I don't know what !!
So I create a new one

GREAT NEWS !!!
We connected our acrobat.com account with Safari.
On our dashboard when we had clicked on DPS App Builder on the left, Safari offered to save us from Apple Developer account !!!!
And when this recording was made, DPS App Builder no longer ask any questions !!
When we connected with Firefox on our acrobat.com account and we clicked on DPS App Builder, any proposed registration had been sought by Firefox.
Effectively, we had not yet registred our company with Apple Developer.
So, the problem seems to be in the registration with Apple, and apparently, DPS App Builder doesn't want to be launched if this registration is not yet made.
Well, now DPS App Builder works normally
Thanks for your help.
I hope that this discussion can help someone else who will be blocked with DPS App Builder.
(PS : can you inform me if this blocking is known in Adobe DPS development team ?)

"DPS Builder requires authentication"?

All set to roll, folios built, go to Create App... in InDesign Folio Builder palette and I get DPS Builder to open up to this message screen. I was told to install the latest version of DPS Builder the first time I tried to create the app. I installed it, then when it was opened I could not get past the Accept button on T&Cs screen.
Since a restart I get this screen now, all the time. Saw issue posted elsewhere, but the solution was flagged as using the Macs user account that is not the admin account -I am the admin user on my Mac.
I am a full Adobe CC account holder, trying to publish my first single use app. InDesign version CC 9.2.1, DPS Builder 3.0.0, OS X 10.9.
Any help appreciated - I really need to get this last phase completed.
Can I build the app through Folio Producer online instead?

Hi Bob.
I have now reinstalled everything - App Builder (via Dashboard and not), InDesign, and a hot fix found for DPS Tools. Nothing works - I still get this 'Requires Authentication' lock out after using 'Create App...' in InDesign via App Builder.
Are there known bugs since I updated to version 30 of the DPS Tools, new APP Builder and InDesign CC versions? Or is there another OS X issue that is preventing this 'authentication'?
Thanks

Adobe Viewer Builder 1.9.0 error to install iOS 5.1 at iPad2

Hi,
I generate an viewer builder using 1.9.0 but i can't install it on 2 iPad 2 with iOS 5.1, In iOS 5.1 it always shows "iTunes Sync - [app name] failed to install".
I added UDID of both iPad2 in the mobile provision file before generating the ipa file, I tried to install it thru Safari or iTunes but both failed.
But I can install this ipa file on iPad1 with IOS 4.2. Someone had same problem?
Regards,
App developer

Did you include the device's UDID in the mobile provision file?

Viewer Builder, Built-in Single App, Error "Signing Failed"

Hi All
I created Built-in Single App, with sample1.zip exported on Dashboard,
developer-viewer.ipa/developer-viewer.zip is built correctly. (Folio/Viewer version is V21)
Than I changed only from sample1.zip to magazine.zip,
then developer-viewer.ipa/developer-viewer.zip is Not built, with "Signing Failed".
I checked provision files, p12 files and others, uninstall and install Viewer Builder,
but still I can't built a built-in Single App with magazine.zip.
How to fix this trouble?
shimoawazu

I used a sample1.zip for confirming the Viewer Builder settings.
The sample1.zip is 4pages data of our magazine.
I built a Built-in Single App with sample1.zip by Viewer Builder correctly.
Then the folio of magazine was ready, I published it and exported magazine.zip.
And I just changed from sample1.zip to magazine.zip, but a Built-in Single App is not built correctly with "Signing Failed".
I deleted the App on the list of Viewer Builder and re-built a Built-in Single App again,
the result is same, "Signing Failed".
I changed from magazine.zip to sample1.zip, Built-in Single App is built correctly.
What is wrong with magazine.zip?
shimoawazu

Hidden Report Viewer Confiugration Error on aspx pages that use report viewer web control

I try to fix the problem. The error below is embedded on aspx pages that use report viewer web control. Please note that the div element is hidden, and the reportviewer is displaying correct contents.
Div element hidden on aspx page
<div id="ReportViewer1_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
</div>
I tried adding the two elements to web.config, but to no avail.
Add below to system.web/httpHandlers
<add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
or add below to system.webServer/handlers for Internet Information Services 7 or later.
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
The required assemblies below are installed under C:\Windows\assembly folder. I have installed both Microsoft ReportViewer 2010 Redistributable, and 2008 SP1.
Microsoft.ReportViewer.WebForms, version 10
Microsoft.ReportViewer.Common, version 10
Below is the whole web.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="car" value="myCar" />

</appSettings>
<system.web>
<httpHandlers>
<add verb = "*" path = "Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

</httpHandlers>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.Build.Framework, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</buildProviders>
</compilation>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
</system.webServer>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="WebService1Soap" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:58269/WebService1.asmx" binding="basicHttpBinding"
bindingConfiguration="WebService1Soap" contract="ServiceReference1.WebService1Soap"
name="WebService1Soap" />
</client>
</system.serviceModel>
</configuration>
Any idea?
Update:
IIS is7.5, AppPool is Integrated.
I have tried below, none of them works:
1) Add it only to system.web\httpHanders. Changed AppPool to classic, still got hidden error.
2) Add it only to system.webServer\handlers. Integrated mode,still got hidden error.
3) Add both to both element. Integrated mode, still got hidden error.

Hi Kingofwebguru,
According to your description, when you use reportviewer control, you got the error message: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file.
To troubleshoot the problem, please refer to the following steps:
Click Start, click Run, then type InetMgr.exe and click OK.
Click plus sign next to server name to expand it.
Click Application Pools in left pane.
In Application Pools list, click DefaultAppPool.
In the Actions pane, in Edit Application Pool section, click Edit Settings to check the Pipeline mode.
Configuration settings for the HTTP handlers are specified in the system.web/httpHandlers element and the system.webServer/handlers element. of your application Web.config file. The handler specified in system.web/httpHandler is used by Internet Information
Services (IIS) 6.0 or IIS 7.0 in Classic mode, whereas the handler specified in system.webServer/handlers is used by IIS 7.0 in Integrated mode. To use IIS 7.0 in Integrated mode, you must remove the HTTP handler in system.web/httpHandlers. Otherwise, IIS
will not run the application, but will display an error message instead.
For more information about Web.config Settings for ReportViewer, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251661.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Viewer Builder Error - requires authentication

Similar Messages

Maybe you are looking for