Viewer Builder Error

Hello:
When trying to use the Viewer Builder to compile an app, I've got the following error when selecting the distribution certificate. "Not finding expected label "iPhone Distribution" in this certificate". I attached image so you can check
Thanks for your help..

Hi Ben,
We're using version 1.5. Basically the 1.4 version when launched generated an error. Something about it having been expired, and we removed it and downloaded and installed the 1.5 version.
Additional info:
Mac OSX 10.6.8 run with 8Gb Ram.
By the way...something different... in the provisioning account set-up we requested just the one email for Viewer Builder. Should we be using dedicated emails instead for each publication that'll be iTunes Subscription? (this is our first magazine we're transfering, so we've not got a conflict yet, but could have in future).
Thanks,
Sara
Message was edited by: Sara 2

Similar Messages

Viewer Builder error: 'Signing Failed'

What does the View Builder Error 'Signing Failed' mean when I download my developer or distribution apps from Viewer Builder? The dev IPA and dist ZIP files appear to download correctly despite the message, so what is it trying to tell me?
Ali

Righty, I turn to page 15 of the 'Adobe Publishing Process for iPad Viewer Apps' PDF as provided by my Adobe reseller. All the screenshots are blurred but no matter, I can probably muddle through.
The chapter is headed 'Setting up Apple Push Notification Service (Optional)'. At the end of the introductory text is a paragraph reading: 'Important: If you have already created an App ID and certificates, you can configure your App ID to enable push notifications. You don't need to create new development and distribution certificates. However, you do need to create new mobileprovision files.'
Fine, that's clear. My app exists already: I'm just planning to build an updated version, so naturally I have an App ID. The paragraph has told me that I don't need to create certificates, but I do need new mobileprovision files.
The first section after this is headed 'Creating a push notification certificate'. OK, I shall ignore this section because, as explained above, I apparently don't need to create any certificates.
The next section after this is headed: 'Creating a .p12 APN certificate'. Again, my understanding is that I don't need to create any certificates, so I shall ignore this section too.
Oh... I've already reached the end of the chapter on 'Setting up Apple Push Notification Service (Optional)' and I haven't done anything. How do I create the special mobileprovision files that I'm supposed to need for APN?
Well, this seems odd, so I flip back to page 6 and the beginning of the chapter headed 'Creating Certificates', seeking clarification. In the introductory text is a paragraph that reads: "If you want to enable the Apple push notification service (APN), create a separate certificate that you can upload to the Adobe fulfillment server. See the section on setting up push notifications for details.'
So this chapter is telling me that I need to create a new certificate for APN, but no mention of mobileprovision files, yet at the same time tells me to read a chapter that tells me that I don't need to create new certificates for APN and I do need new mobileprovision files.
I'm afraid I can't make any sense of this, and neither can anyone I send these instructions to. Luckily for us, APN isn't particularly significant for a twice-yearly magazine. But it would be nice to get a handle on it in case we launch a weekly.
Ali

Viewer Builder Error - requires authentication

I keep getting this message when i try to log into DPS in the viewer builder.
I have CS5.5 master suite and viewer builder installed on my work setup and i can log in to accts via the viewer builder there fine.
I installed the viewer builder on my home computer (no CS5.5 suite) and i get this error message for any acct i try to log in to.
Is it a requirement for viewer builder that indesign is installed on the system? might there be some other error causing this, or a workaround?
Thanks-----

I have the same problem.
I just had produce a new single veiwer app to appstore.
After 2 days, when I try to produce another single viewer, I meet that problem, both ipa and zip have the smae error information.
I pretty sure both our "Development Certificates" and "distribution Certificates" was right and I try to re-produce those again and again,
Even our developer and distrubution p12 files.
Do you have any suggestion about this situation??

Viewer Builder Error - SD Portrait Subscription Tile error

I am in the process of moving the first of our Apps to the news stand following Bob Bringhursts Adobe Developer Connection Article - Adding DPS apps to Apple Newsstand.
At the point where I am asked to add Landscape and Portrait Subscription tiles I can locate and add the Landscape Tile - OK no problems so far
I locate and add Portrait tile 331x180 pixels I created and select image but I dialog box is highlighted red and red pop up error - "This tile must be331 x 180 pixels and PNG format".
I have double checked image file and it is 331x180 pixels in PNG format with PNG file extension.
I have created using Photoshop a new 331x180 pixel PNG file and get the same error with this file.
Can get past this point to build the App for submission to Apple
What am I doing wrong?

Bob,
Got confused and had the image orientation wrong 180 x 331 pixels as
opposed to 331 x 180 - the Portrait Tile is actually short and wide
(landscape).
As soon as I flipped the orientation I was able to upload the image and
sucessfully build the App. The App is now in the Aople queue.
Thanks for your help

Trouble with Viewer Builder 1.4

Hello,
Does anybody still works with Content Bundler and Viewer Builder (Drop11 tools)?
I made a folio file with Content Bundler (Beta v0.2.8.16953) and InDesign CS5.
Now I try to create my *.ipa and *.zip files through Viewer Builder (v1.4).
Everything seems to work fine till I try to download the *.ipa and *.zip files.
After a few minutes, an error message appears: "Viewer Builder error, connection failed".
However, two (parts of) files are downloaded, 2,3 Mo each, and nothing to do with them.
My first try was on last friday, trouble remains today.
I tried today using different folio files, same results...
Anybody to answer?
Thanks a lot.

Hey
Did you find a solution ?
I have the same problem !!

Signing Viewer Builder for Android

I have been trying to publish my first app to the Android Market using the DPS Pro Edition & I'm having trouble creating certificates to sign my app in DPS Viewer Builder (version 2.1.130)
Every time I click on the .apk package to download it from Viewer Builder I get an error pointing to something being wrong with the certificate I have created. The error I get is: Viewer Builder Error: Signed output file could not be created- certificates may be invalid. It does dowload a file called unsigned-viewer.zip I presume I can't do anything with this without it being signed.
I've read and followed all that is mentiond in http://developer.android.com/tools/publishing/app-signing.html to create the certificate.
I have tried creating the certificate using Flash and Terminal from my mac running OS 10.7.4
My folios were built using Viewer Version v22
Any help would be very much appreciated.
Cheer
Simon

What version of Viewer Builder are you using? If it's 2.1.x and not 2.2, move Viewer Builder from the Applications folder to the trash and download the most up-to-date version from the Dashboard. Then try again.

Minor error in Viewer Builder pop-up info

Hi,
I noticed a minor error in the Viewer Builder pop-up information. When you create a viewer for the iPad and choose "multi issue with iTunes subscription", you get to complete the Newsstand information. The iPad 1 & 2 Landscape Subscription Tile info popup states that the PNG graphic must be 468x135, but in fact this should be 463x135 (see help file PDF). It's not a big deal, but it can be confusing for some users I think.
Can someone please confirm this?
Cheers,
Bart

I'm able to get out this problem.
I'd one month old installation of designer and workbench. During generating formguide, this set up created mxml with following component for Optional paragraph:
Then I uninstalled the workbench and designer and installed latest 8.2.1_GM version of those and run the formguide again. This time, the produced mxml has the following entry
(Notice the difference from cm.* to cm.controls.*)
As I guess (just a guess),I think earlier it searched CmOptionalParagraph in cm root
(it gave error that referenced component cm.CmOptionalParagraph not found as it was in cm.controls location.)
Now it is able to find that as it searches correct location.

Error in Viewer Builder importing PNS p12 Development Certificate

I am getting an error in the Viewer Builder importing the PNS P12 Development Certificate.
I have already made the certificate for PNS Production/Distribution and for Development.
I was successfully able to import the PNS p12 Production/Distribution Certificate.
When I went to the next field to import the certificate for PNS Development - error says "Not finding expected label 'Apple Development IOS Push Services:' or 'Apple Development Push Services:' in this certificate"
I followed the same process for both PNS Distribution and Development Certificates.
Why would one work and one not? The Viewer Builder gives very little feedback?
Dave

I've been running into this same problem for DAYS now with an app I'm trying to build, except for me it's the production PNS p12 certificate.
I've tried creating a new app several (countless, actually) times. Since I never get to the point where I can save it, I've had to create a totally new app at every attempt—is this what happened to you? And it eventually worked?
I've also installed and uninstalled Viewer Builder a few times now and the same problem occurs.
BTW, I send my certificate to Adobe and they said that it was valid.

Adobe Viewer Builder 1.9.0 error to install iOS 5.1 at iPad2

Hi,
I generate an viewer builder using 1.9.0 but i can't install it on 2 iPad 2 with iOS 5.1, In iOS 5.1 it always shows "iTunes Sync - [app name] failed to install".
I added UDID of both iPad2 in the mobile provision file before generating the ipa file, I tried to install it thru Safari or iTunes but both failed.
But I can install this ipa file on iPad1 with IOS 4.2. Someone had same problem?
Regards,
App developer

Did you include the device's UDID in the mobile provision file?

Viewer Builder, Built-in Single App, Error "Signing Failed"

Hi All
I created Built-in Single App, with sample1.zip exported on Dashboard,
developer-viewer.ipa/developer-viewer.zip is built correctly. (Folio/Viewer version is V21)
Than I changed only from sample1.zip to magazine.zip,
then developer-viewer.ipa/developer-viewer.zip is Not built, with "Signing Failed".
I checked provision files, p12 files and others, uninstall and install Viewer Builder,
but still I can't built a built-in Single App with magazine.zip.
How to fix this trouble?
shimoawazu

I used a sample1.zip for confirming the Viewer Builder settings.
The sample1.zip is 4pages data of our magazine.
I built a Built-in Single App with sample1.zip by Viewer Builder correctly.
Then the folio of magazine was ready, I published it and exported magazine.zip.
And I just changed from sample1.zip to magazine.zip, but a Built-in Single App is not built correctly with "Signing Failed".
I deleted the App on the list of Viewer Builder and re-built a Built-in Single App again,
the result is same, "Signing Failed".
I changed from magazine.zip to sample1.zip, Built-in Single App is built correctly.
What is wrong with magazine.zip?
shimoawazu

Wp8 build error="The name 'InitializeComponent' does not exist in the current context" in app.xaml.cs."

I added a new xaml page to my project and copy and pasted some regular snippets to it that I've done before to many other pages. After all the changes looked good to me, I did a rebuild and got this error in the app.xaml.cs which I hadn't changed.
I also get the same error in the new page I created. It seems that the xaml design and code are not linked because there are other build errors in the new page's code file that reference other controls in it's design. Those references also look
ok to me but they get the similar "The name '.....' does not exist." error.
walter fink

Hi,
You don’t have “x:Class="DIYMedAPP.App"”
in your App.xaml file, which caused such error in App.xaml.cs. Please add it.
<Application
x:Class="DIYMedAPP.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone">

<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching"
Closing="Application_Closing"
Activated="Application_Activated"
Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Possible to make a Newsstand App without subscription using viewer builder 1.9?

As far as I can tell, the only way to enable newsstand through Viewer Builder 1.9 is if I select 'multi-issue with itunes subscription'. In itunes connect newsstand is enabled, but if I build the viewer with the multi-issue option selected and try to upload to apple, I get an error that newsstand is not enabled. (info.plist must include Newsstand=true) We did not plan on offering a subscription, only individual 'issues' for purchase. Is there a way around this? If I set up a free subscription, can I still charge for my individual folios?

Did you include the device's UDID in the mobile provision file?

Lot of build errors in project created for debug CRM 5.0

Hi SDN!
I want to setup java debugging for CRM 5.0 modified application. According to note 1154496 I created project "crm_b2b".
I took file src.zip from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmb2b at first try and from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmcrb2b at second try. After import NWDS performed building for my project and shows lot of build errors (more than 12 thousands for 1-st try and near 2 thousands for 2-nd try). I reduced some of error by adding jar files from crm war file to build path. But I don't know how to resolve errors like "The method hasPermissions(Permission[]) in the type UserBase is not applicable for the arguments(EserviceHierarchyPermission[])" (error in com.sap.eservice.common.user.permission.CommonPermission.java, line 186). Also some of errors concerned with requierd libraries in build path.
My NWDS is 7.0.14
CRM 5.0 SP 11
Regards, Lev
Edited by: Lev Kulaev on Jul 3, 2008 2:03 PM

Hi!
Here are my doings:
1) set breakpoint in standart code
2) run my debug configuartion
3) run CRM 5.0
4) NWDS stopped execution on breakpoint
5) I right-click on variable, choose "Watch"
6) NWDS shows me "error during evaluation" in "Expression" tab for selected variable
I'm confusing since it was possible to use "Watch" for variables in CRM 4.0.
Yes, you right, I can view all variabe values on "Variables" tab. I wanted to use "Expression" tab because it's more comfortable for me but it seems that I can use only "Variables" tab.
So, thanks for help! My question is answered, but if you can give me more information about subject, you're welcome.
Regards, Lev

Hidden Report Viewer Confiugration Error on aspx pages that use report viewer web control

I try to fix the problem. The error below is embedded on aspx pages that use report viewer web control. Please note that the div element is hidden, and the reportviewer is displaying correct contents.
Div element hidden on aspx page
<div id="ReportViewer1_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
</div>
I tried adding the two elements to web.config, but to no avail.
Add below to system.web/httpHandlers
<add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
or add below to system.webServer/handlers for Internet Information Services 7 or later.
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
The required assemblies below are installed under C:\Windows\assembly folder. I have installed both Microsoft ReportViewer 2010 Redistributable, and 2008 SP1.
Microsoft.ReportViewer.WebForms, version 10
Microsoft.ReportViewer.Common, version 10
Below is the whole web.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="car" value="myCar" />

</appSettings>
<system.web>
<httpHandlers>
<add verb = "*" path = "Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

</httpHandlers>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.Build.Framework, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</buildProviders>
</compilation>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
</system.webServer>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="WebService1Soap" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:58269/WebService1.asmx" binding="basicHttpBinding"
bindingConfiguration="WebService1Soap" contract="ServiceReference1.WebService1Soap"
name="WebService1Soap" />
</client>
</system.serviceModel>
</configuration>
Any idea?
Update:
IIS is7.5, AppPool is Integrated.
I have tried below, none of them works:
1) Add it only to system.web\httpHanders. Changed AppPool to classic, still got hidden error.
2) Add it only to system.webServer\handlers. Integrated mode,still got hidden error.
3) Add both to both element. Integrated mode, still got hidden error.

Hi Kingofwebguru,
According to your description, when you use reportviewer control, you got the error message: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file.
To troubleshoot the problem, please refer to the following steps:
Click Start, click Run, then type InetMgr.exe and click OK.
Click plus sign next to server name to expand it.
Click Application Pools in left pane.
In Application Pools list, click DefaultAppPool.
In the Actions pane, in Edit Application Pool section, click Edit Settings to check the Pipeline mode.
Configuration settings for the HTTP handlers are specified in the system.web/httpHandlers element and the system.webServer/handlers element. of your application Web.config file. The handler specified in system.web/httpHandler is used by Internet Information
Services (IIS) 6.0 or IIS 7.0 in Classic mode, whereas the handler specified in system.webServer/handlers is used by IIS 7.0 in Integrated mode. To use IIS 7.0 in Integrated mode, you must remove the HTTP handler in system.web/httpHandlers. Otherwise, IIS
will not run the application, but will display an error message instead.
For more information about Web.config Settings for ReportViewer, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251661.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Viewer Builder signing failure for distribution viewer

I'm having the following problem:
I"m able to download the developer ipa from Viewer Builder with no problems, but when I try to download the distribution build, I get a VB error, "signing failure."
this indicates to me that there is a problem perhaps with my p12 and mobile provisioning profile, but I've done all that correctly, as far as I know, and tried multiple times to reproduce from Apple's provisioning portal, but nothing works.
is anyone else having this problem?

Yes, I've been having this issue since last Friday. But, my ipa isn't working either....

Viewer Builder Error

Similar Messages

Maybe you are looking for