VIEWER Different Quality Picture than CANVAS, WHY?!?!

For the first time today, I captured my 24fps HD 1080 footage from my camera, using the easy setup HDV 1080p 24 setting, and when I uploaded it and played the clips in the viewer the footage is perfect quality. But when I drag it to the timeline, and then render, and play it back with the canvas, the quality of the footage looks substantially lower. It also automatically goes into wide mode(displays black bars) and also when I look at its motion tab it says it is 50 on the scale. what is going on here? Id appreciate anybodys help! thanks in advance.

when I uploaded it and played the clips in the viewer the footage is perfect quality. But when I drag it to the timeline, and then render, and play it back with the canvas, the quality of the footage looks substantially lower.
"..and then render..."
Somethings wrong...you should NOT be needing to render. When you drop the clip into the timeline, it should be ready and rearing to go. As mentioned, make sure your SEQUENCE settings match your clip settings. Judging by what you said, I'll wager the timeline is a DV timeline.
Choose an Easy Setup that matches your footage...DELETE SEQUENCE 1! Create a new sequence and then drop your footage into that.
You should never have to render on the timeline if you captured using FCP. If you do...then that a BIG WARNING SIREN saying that you are doing something wrong.
Shane

Similar Messages

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Exporting from Lightroom 1.3: Different sort order than defined in Grid view

Just did an export from Lightroom 1.3 and ended up with a the wrong export order.
Here is what I did.
1. Create a collection
2. Drag the pictures I want to export into that collection
3. Select: Sort: Import order (In lightroom grid view - the sort order was correct)
4. Export from Lightroom with "Userdefined name - sequence"
The result is a total different sort order than I can see in the Lightroom Grid view.
Very annoying.
Any ideas?
Also - in the new export dialog there seems to be no option anymore to CHANGE a user-defined export like in the previous version. What do you do if you want to change something?
Overwrite with the same name?
Remove old export and add the new one changed?
greetings
gfisch

Are you seeing this only in Lightroom? They are not 'still in the parent, Germany folder.' only visible their if you have 'Include Photos from Subitems' checked in the Menu/Library of Library.
Uncheck that you you will only see them in their correct folders.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D
See LR Links list at my
Blog for related sites.

Why does ical on icloud have a different lay out than on my mac

Why does iCal on my MacBook Pro have a different lay out than on iCloud? I like the iCloud layout better, the only missing niceties is the year calendar. How do I get both iCals to look the same? The ideal iCal? The one from iCloud WITH the year calendar.

Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Please update Firefox to the latest version via "Help > Check for Updates or Help > About Firefox" 
The Firefox version that you use is no longer maintained with security and stability updates. 
Using unsupported Firefox versions is at your own risk and makes you vulnerable to attacks. 
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html

Why is optimizer different in sql than in pl/sql?

Hello, I am running Oracle database 9i, it is running on an On-Demand hosted server, its purpose is to serve our Oracle Payroll application.
I have a certain query, and first tried it as a stand-alone query. It displayed the results almost immediatly.
Then I inserted the exact same query in a pl/sql block. It took more than one hour and canceled it. By looking at the session browser in TOAD, I saw that it was stuck on that query.
I also saw that the explain-plan for the query changed drastically from running as stand-alone sql to running inside pl/sql.
Why is this happening? How can I avoid this?
Please note that I do not intend to use optimizer hint since the indexes are built by oracle On-Demand and not me, so I don't know which indexes exist.
Here is the explain plan when running from stand-alone SQL:
Operation Object Name Rows Bytes Cost Object Node In/Out PStart PStop
SELECT STATEMENT Optimizer Mode=CHOOSE          1           65
bq. SORT AGGREGATE          1      72
bq. bq. TABLE ACCESS BY INDEX ROWID     HR.PAY_ELEMENT_ENTRY_VALUES_F     1      13      4
bq. bq. bq. NESTED LOOPS          1      72      65
bq. bq. bq. bq. MERGE JOIN CARTESIAN          1      59      61
bq. bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID     HR.PAY_ELEMENT_ENTRY_VALUES_F     1      13      4
bq. bq. bq. bq. bq. bq. NESTED LOOPS          1      36      33
bq. bq. bq. bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID     HR.PAY_ELEMENT_ENTRIES_F     1      23      29
bq. bq. bq. bq. bq. bq. bq. bq. INDEX RANGE SCAN     HR.PAY_ELEMENT_ENTRIES_F_N50     44           3
bq. bq. bq. bq. bq. bq. bq. INDEX RANGE SCAN     HR.PAY_ELEMENT_ENTRY_VALUES_F_N50     9           3
bq. bq. bq. bq. bq. BUFFER SORT          1      23      57
bq. bq. bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID     HR.PAY_ELEMENT_ENTRIES_F     1      23      28
bq. bq. bq. bq. bq. bq. bq. INDEX RANGE SCAN     HR.PAY_ELEMENT_ENTRIES_F_N50     44           2
bq. bq. bq. bq. INDEX RANGE SCAN     HR.PAY_ELEMENT_ENTRY_VALUES_F_N50     9           3
And here is the plan when running inside pl/sql:
Operation Object Name Rows Bytes Cost Object Node In/Out PStart PStop
SELECT STATEMENT Optimizer Mode=CHOOSE 1 293463
bq. SORT AGGREGATE 1 48
bq. bq. MERGE JOIN CARTESIAN 1 M 56 M 293463
bq. bq. bq. MERGE JOIN CARTESIAN 78 3 K 3771
bq. bq. bq. bq. MERGE JOIN CARTESIAN 1 34 57
bq. bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID HR.PAY_ELEMENT_ENTRIES_F 1 17 29
bq. bq. bq. bq. bq. bq. INDEX RANGE SCAN HR.PAY_ELEMENT_ENTRIES_F_N50 44 3
bq. bq. bq. bq. BUFFER SORT 1 17 28
bq. bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID HR.PAY_ELEMENT_ENTRIES_F 1 17 28
bq. bq. bq. bq. bq. bq. INDEX RANGE SCAN HR.PAY_ELEMENT_ENTRIES_F_N50 44 2
bq. bq. bq. BUFFER SORT 15 K 107 K 3743
bq. bq. bq. bq. TABLE ACCESS BY INDEX ROWID HR.PAY_ELEMENT_ENTRY_VALUES_F 15 K 107 K 3714
bq. bq. bq. bq. bq. INDEX RANGE SCAN HR.PAY_ELEMENT_ENTRY_VALUES_F_N1 15 K 39
bq. bq. BUFFER SORT 15 K 107 K 289749
bq. bq. bq. TABLE ACCESS BY INDEX ROWID HR.PAY_ELEMENT_ENTRY_VALUES_F 15 K 107 K 3714
bq. bq. bq. bq. INDEX RANGE SCAN HR.PAY_ELEMENT_ENTRY_VALUES_F_N1 15 K 39
As you can see, the cost goes way up when running inside a pl/sql block.
Thank you very much for your help.
Eduardo Schñadower
Edited by: shinaco on Dec 12, 2008 4:10 PM
Added indentation. Sorry for that, I didn't realize copy-paste didn't work well here.

I meant to add,
Why is optimizer different in sql than in pl/sql? It is not different, it is the same optimizer.
If you replace bind variables with literals then you have a totally different query, with much more information available to the optimizer. If you are seeing the same statement with the same literal values get a different plan within PL/SQL than in SQL*Plus or TOAD etc then there must be something else different. Unfortunately there is a lot less diagnostic info available in 9i (and I don't have 9i around to test on). Perhaps you can get a 10053 trace from each session and see if you can see what is different.
btw I still can't read the execution plan. There is more information in the DBMS_XPLAN output, and it needs to be formatted using ** tags or equivalent HTML.

Photo rotaion in organize view different than edit view & slideshow

Photo rotaion in organize view different than edit view & slideshow. The fact that the power supply to the computer was accidentally disconnected while I was working in iPhoto no doubt was the cause of this phenom.
Any suggestions as to how to re-sync the rotations back up?

Thanks for the tip. I wasn't aware of the use of theses two keys simultaneously. It occured to me after this post to just trash the whole library which I had just created for this particular group of photos and re-import the photos to a newly re-created library. I still had the camara connected so as it turned out it was fairly easy. Now that I think about it, if this hadn't been a newly created library just for this group of photos it wouldn't have worked so simply, so I guess I discovered another benifit for having multiple libraries.
I'm glad you recomended the apple/alt key combo though as this knowledge no-doubt will come in handy at some time.
iMac PowerPC G4 800 mhz 1GBSDRAM 17" Flatpanel Mac OS X (10.4.8) Seagate external Firewire/USB HD's:250GB & 500GBSony DSC-V3 & DSC-S8 Cybershot

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

HT201077 Why does photo stream on my i phone have more of my pictures than photo stream on my mac?

Why does photo stream on my i phone have more of my pictures than photo stream on my mac?

Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream on your Mac.
OT

Different picture than opened on iphoto

When I click to view a picture in iphoto it is not the same picture as it was before when you see the multiple pictures, and when viewing just a picture that I didnt click on, it shows the one I clicked on the timeline which is not the same one Im viewing. After closing iphoto and restarting the comp and importing diffrent ways it keeps happening. On second picture Im posting, picture on timeline is a portait and shows as landscape and started going wrong there (even after trashing it) but also on other random spots. Any ideas on how to fix?

Also when I was putting some of the photos from SD card of canon they had the same name, IMG_511.JPG(first sc card) and again IMG_511.JPG(other sd card). and after hitting keep both it turned a new one to IMG_511 2.JPG. (with both locked and unlocked pictures) I coundnt pinpoint if that was the problem because they didnt stand out on the pictures that were not the same in the diffrent views on iphoto where the problem is.
Is there a reason why only 1 of 2 pictures never show the image when viewing in a folder?
Im going to try what you said but just want to figure it out so if it happens again.

Why do I keep getting this message - it is simply not true. 'You are signed in with a different Apple ID than previously used with Podcasts. Do you want to sync these podcast subscriptions and stations?

Why do I keep getting this message - it is simply not true. 'You are signed in with a different Apple ID than previously used with Podcasts. Do you want to sync these podcast subscriptions and stations?
<Email Edited by Host>

Please sign out of the iTunes Store by selecting
Store ▹ Sign Out
from the iTunes menu bar. Then sign back in.

Why do I get a darker printed picture than what I see on the screen of my iMac

why do I get a darker printed picture than what I see on the screen of my iMac

Because your screen is calibrated incorrectly? Because you are using an Adobe RGB color profile instead of the recommended sRGB? Because your printer is not working correctly?
With no information other than "it does not work" guesses are all that one can provide
What set up do you have? What color profile are you using? How is your screen calibrated?
What else can you tell us?
LN

FCP 7 lose quality in Canvas, WHY?

I am working within fcp 7 and for some reason all my footage is losing its quality once i drop it into the timeline and it shows up on the canvas, i have changed everything in settings, pref, etc and still no results. The initial footage was avi so i converted it to mov and now even jpegs come up looking terrible. Someone please help me.
if you could email me at [email protected] or respond to this post i would really appreciate it.
Thanks

I imported the Avi file right into fcp with no issue, i also converted it to a MOV file and and reimported still the same problem. The clip plays fine on my desktop as well as in the viewer but once in the canvas the clip losses all of its quality. Data Rate 33.6 K/sec pixel aspect square 16 fps.
Thank you for helping me out i really appreciate it

Is Numbers different on iPad than on a Mac? Why don't I see toolbars with Numbers on my iPad?

Is Numbers different on iPad than on a Mac? Why don't I see toolbars with Numbers on my iPad?

So when I try to use a tutorial, it's gonna be a crapshoot if it will help me or not?

Why is my In design swatch panel creating swatches with different color builds than Pantone formulas

I am working in ID CS5 now but I have seen this problem in older versions as well. After creating a swatch, either process or spot, and using any of the Pantone selection choices, I get a different formula build than what is in the Pantone books. For example; PMS 110 PC is 2/24/100/7 in the book, but in InDesign it formulates as 0/12/100/7. Doers anyone have info on this?
S

maybe just as well, we are getting CS6 this month
CS6 includes Pantone+ Color Bridge libraries, which use CMYK Process definitions to simulate Pantone solid colors. The new solid library colors (i.e., Pantone+ Coated) are always defined as spot type with Lab definitions—you can no longer switch to CMYK definitions via Ink Manager for the those libraries.
Pantone+ Color Bridge Coated defines 110 as process CMYK 2|22|100|8. It's not surprising Pantone is always changing the CMYK simulation builds because the appearance of CMYK depends on the printing conditions. Personally I would go for a color managed conversion, allowing that much black in a saturated yellow seems questionable.

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

VIEWER Different Quality Picture than CANVAS, WHY?!?!

Similar Messages

Maybe you are looking for