Viewer goes blank when selecting an adjustment

I'm probably overlooking something. When I attempt to make an adjustment images in a new project, Aperture has started doing something strange. All of the images in this project are .jpg. After first importing the images, I was able to successfully adjust a handful of the images with no problem.
OK, so I first noticed this when I tried to use the Red Eye Tool. First, I enlarged the image to 100%, adjusted the diameter of the Red Eye tool. Then clicked on the first "red eye." For about 1/2 second the yellow circle appeared around the target. Then the image disappeared, leaving just the Viewer background color visible. The processing message and widget appeared at the bottom of the Viewer. After a minute of this I clicked on the Adjustments tab and no adjustments are available - it just shows an outline of where the adjustments usually are.
If I click on the Browser view, the images reappear. There is a new version that has 1. The first Red Eye adjustment or 2. If an adjustment panel was clicked on the adjustment checkbox shows checked. After that the second Red Eye adjustment can be applied or the adjustment panel stays functional. It seems like once the initial adjustment selection / disappearing image cycle is done, all of the adjustments work fine. Even multiple adjustments are no problem.
So, I would certainly appreciate any suggestions if you have experienced this problem!
Craig

Did some more fiddling, but still no closer to a resolution. It seems that any adjustment causes the image to be automatically stacked with the image to be modified under the original image. I checked preferences and the Automatically stack new versions is not checked.

Similar Messages

Diagram goes blank when bpel file is outside default dir

Hi,
I am using JDeveloper v10.1.2.1.0 and the “Diagram view” goes blank when I take the “.bpel” file from the project root directory (the default location) to some other directory, even though I modify the references accordingly. My suitcase looks like this:
<BPELSuitcase>
<BPELProcess id="TaskAssignment" src="../../bpel/TaskAssignment.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">TaskAssignment.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>
The project compiles successfully with “rebuild”, the “Source” tab allows me to see the BPEL source code, but the “Diagram view” remains blank. Why?
Thanks,
Manuel

I have the similiar issue even when the BPEL file is not touched or moved. This happens in I use the email activity.

<partnerLink name="client" partnerLinkType="client:AdaptationNotifier"
myRole="AdaptationNotifierProvider"
partnerRole="AdaptationNotifierRequester"/>
<partnerLink name="AdaptationService"
partnerLinkType="ns3:AdaptationService_PL"
partnerRole="AdaptationService_Role"/>
<partnerLink name="NotificationService"
partnerRole="NotificationServiceProvider"
partnerLinkType="ns1:NotificationServiceLink"/>
</partnerLinks>

<variables>

<variable name="inputVariable"
messageType="client:AdaptationNotifierRequestMessage"/>

<variable name="outputVariable"
messageType="client:AdaptationNotifierResponseMessage"/>
<variable name="Invoke_1_logMessage_InputVariable"
messageType="ns3:AdaptationService_logMessage"/>
<variable name="Invoke_1_logMessage_OutputVariable"
messageType="ns3:AdaptationService_logMessageResponse"/>
</variables>

<sequence name="main">
<receive name="Receive_Notification_Message" partnerLink="client"
portType="client:AdaptationNotifier" operation="initiate"
variable="inputVariable" createInstance="yes"/>
<scope name="Scope_1">
<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<faultHandlers>
<catchAll>
<invoke name="Invoke_1" partnerLink="AdaptationService"
portType="ns3:AdaptationService"
operation="logMessage"
inputVariable="Invoke_1_logMessage_InputVariable"
outputVariable="Invoke_1_logMessage_OutputVariable"/>
</catchAll>
</faultHandlers>
<sequence name="Sequence_1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
partnerLink="NotificationService"
portType="ns1:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
</scope>
</sequence>
</process>

JDeveloper: After crashed with "Unexpected Error" design view goes blank

Hi, I am new to JDeveloper. I have installed 11.1.2.2.0 JDeveloper and have just installed all the updates via HELP -> CHECK FOR UPDATE.
I am currently working on JFS Tutorial at http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_56/jdtut_11r2_56.html
I encounter the similar problem when I was in STEP 2 for numerous time. :(
No matter what I selected from the error box, my design view will end up be blank, it display nothing, even I hit the refresh button. :(
I check the source view, preview, yes they work fine.
Also, I have tried to clean the project. No helping at all.
This is how the error shows: http://s19.postimage.org/hxa7q5e6r/error.png
The details of the error: http://s19.postimage.org/sqhpynvgz/error_detail.png
Can someone please help me out :(
Edited by: 954390 on 22-Aug-2012 20:47
Edited by: 954390 on 22-Aug-2012 20:55
Edited by: 954390 on 22-Aug-2012 20:56

Have you tried to open the finished app from the zip? >> Yes, I did. And it works.
Also, as long as it does not crash nothing goes wrong. But once it does, not only the design view goes blank but I cant even execute the project, I will hit 505 error in the browser.
Can you give more info about your environment (OS, memory....)? >> http://s19.postimage.org/ttpxyfk7n/specs.png

My screen goes blank when receiving or making calls.

My screen goes blank when receiving or making calls. Cannot get back to the tiles window until the other party hangs up.

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Lg cosmos touch goes blank when placing VM calls

My lg touch goes blank when calling vm & i cannot get the dial pad w/o opening the phone. I've seen other postings regarding resetting the proximity in the service menu but i cant find it on this phones menu. how / where do i go to reset the proximity settings IF that is what will fix it. thanks.

Hello yosmt! I've researched the operation you've mentioned (changing the proximity settings on the Cosmos Touch) and can't find any data on it. I can tell you this: If you're dialing to your voicemail or any other Interactive voice response system, the display should remain illuminated while the phone is held at a distance from the human face for at least 5 seconds. If your phone isn't doing that, then we have to discuss options other than changing settings. If you want, you can send me a personal message through the forum. Please include your name and mobile number. Thanks!

Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
i believe this issue began recently after the most recent version update. i must constantly save my documents in case i go in or
out of full screen view and my page goes blank so i don't lose my work. does anyone else have this issue and what can i do about
it? my macbook uses os x ver 10.7.5. not sure if this is an excel problem or an os x problem.
thanks to anyone who can help me figure this out.

Hi，
As your request is relate to Excel for Mac, better to post your issue to the forum below:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Wind Zhang
TechNet Community Support

Design view goes blank [CS3]

I usually work with split code + design view
When working with certain files and make a change in code
view(or in a linked .css), and then click in Design view, the
Design view goes totally or partially blank. Either nothing appears
at all, or the content appears up to some point, and the rest up to
the end is blank.
Once this happens, there is absolutely no way to make the
'hidden' content visible. Tried to switch to another file, to
select code in code view, to edit in code view or even in design
view - no go. I have to close / open the file, and then it appears
normally. But indeed I can't do this every minite, is there some
solution known?
There is no stuff with visibility set to hidden or alike, if
the content is displayed - it's displayed correctly. Also looks OK
in all major browsers.
Thanks

This often happens when you have added such garbage code that
DW cannot
figure out what to do with it. For example, adding a
<body> or </body> tag
in the middle of a page can do such things. Might that be
what's happening
for you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"harpo_" <[email protected]> wrote in
message
news:f2nq7t$dse$[email protected]..
>I usually work with split code + design view
> When working with certain files and make a change in
code view(or in a
> linked
> .css), and then click in Design view, the Design view
goes totally or
> partially
> blank. Either nothing appears at all, or the content
appears up to some
> point,
> and the rest up to the end is blank.
> Once this happens, there is absolutely no way to make
the 'hidden' content
> visible. Tried to switch to another file, to select code
in code view, to
> edit
> in code view or even in design view - no go. I have to
close / open the
> file,
> and then it appears normally. But indeed I can't do this
every minite, is
> there
> some solution known?
>
> There is no stuff with visibility set to hidden or
alike, if the content
> is
> displayed - it's displayed correctly. Also looks OK in
all major browsers.
>
> Thanks
>

Picture goes blank when new grad filter or brush used.

When I attempt to use a new grad filter or adjustment brush in LR3.6 the picture goes blank i.e. totally black. The history does not update and I can do no other edits until I Ctrl-Z or go to the grid pane or move to the next image. I am running on Windows 7 64 bit and I have re-installed, twice, (repaired) using the latest downloaded LR3.6 off the adobe site. I have done several integity checks which are successful and the problem occurs no matter what catalog I open, small or big. However, my LR 4 beta works perfectly!? This problem came out of the blue and the only software that I have installed on my machine recently was some Windows updates and Firetower which checks changes to my Startup processes.
Alan

I have experienced this on my old machine running Win XP with 4 GB RAM except that my picture went totally white, not black. I think it happens when LR demands more memory than what is currently available.
To alleviate the problem you could try the following:
- Increase your LR Cache size to at least 25 GB (by default it is set to 1 GB). Set Cache size in >Edit >Preferences >File handling tab.
- Increase your page file, and - if possible - set your page file (a) on a different physical drive than where your OS resides, (b) on a different physical drive where your LR catalog resides.
See also here for optimizing LR performance: http://kb2.adobe.com/cps/400/kb400808.html
WW

Using COMMAND 'B' to cut - viewer goes blank?

Not always, but often when I use the COMMAND B to make a cut in a clip - my viewer (which I have on a second monitor) goes blank. Stays blank for awhile, then comes back into service. I'm wondering what might be happening here?

I had the exact problem you report with my core duo Mac Mini connected to a Syncmaster 204B. This problem persisted when I returned the monitor several times to Samsung for replacement 204B's. They eventually upgraded me to a refurbished 204T and the problem disappeared.
It seems to me that Samsung has some real problems with screen blanking when their monitors are hooked by DVI to certain Macintoshes. For anyone contemplating a Samsung monitor, I'd recommend another brand until it's known that this screen blanking problem has been resolved with all Samsung models.
Mac Mini Core Duo Mac OS X (10.4.9) 1 GB RAM

Screen goes blank when using Patch tool

The only information I've been able to find on this issue thus far was a post that was written during the Photoshop CS6 beta period at http://forums.adobe.com/message/4285375
I am using the final released Photoshop CS6 software, not beta, and am having the same issue with the Patch tool. I start to drag around an area to make a selecton, and the screen goes blank so that I can't see where I'm making the selection. When I release the mouse, the image appears again. Another problem which may be related is that sometimes when I zoom in, the screen goes blank. Closing Photoshop and re-launching it usually fixes the problem, but is an annoying time-waster. I have the most current update from the Cloud for Photoshop CS6, 13.1.2.X64.
Does anyone know a fix for this?

RAM is 12 GB. I'm not sure which numbers are relevant for VRAM and scratch drive, but this is what I found for video card properties:
Total Available Graphics Memory: 2809 MB
Dedicated Video memory: 1024 MB
System Video Memory: 0 MB
Shard System Memory: 1785 MB

Samsung 205BW goes blank when using DVI

Hi
I have a G4 Mac Mini. I recently purchased a [url="http://komplett.ie/k/ki.asp?sku=322266"]Samsung 205BW 20in widescreen LCD monitor[/url].
I connected it via the DVI port on my mini with the DVI cable that came with the monitor and it seemed to work great but occasionally the screen will flick black as if there was nothing connected to it. It happens most noticeably when I go from a fullscreen quicktime video to the desktop or if I activate Expose. Also if the Mini goes to sleep and I try to wake it the screen stays black and I either have to reboot or change to using the VGA cable.
The monitor works perfectly if I use a DVI-VGA adaptor and connect to the VGA port on the monitor but I'd prefer to use DVI.....
I read on here of people using SwitchResX to change the settings for the monitor. I downloaded it but I don't really know what to input in the custom settings... perhaps someone here can help?
Here is the DDC file from SwitchResX:
=========================================================
DDC block report generated by SwitchResX for display
SyncMaster
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 4C 2D 1E 02 30 32 41 48
1 | 03 11 01 03 80 2B 1B 78 2A EE 95 A3 54 4C 99 26
2 | 0F 50 54 BF EF 80 B3 00 81 80 81 40 71 4F 01 01
3 | 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0
4 | 36 00 B1 0F 11 00 00 1C 00 00 00 FD 00 38 4B 1E
5 | 51 10 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53
6 | 79 6E 63 4D 61 73 74 65 72 0A 20 20 00 00 00 FF
7 | 00 48 53 47 50 31 31 34 30 33 30 0A 20 20 00 6B
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........SAM
Product Code........7682 (1E02) (021E)
Serial Number.......1212232240
Manufactured........Week 3 of year 2007
Max H Size..........43 cm
Max V Size..........27 cm
Gamma...............2.20
DPMS Supported Features:
Active off
Display type:
RGB color display
Input signal & sync:
Digital
Color info:
Red x = 0.640 Green x = 0.300 Blue x = 0.150 White x = 0.313
Red y = 0.330 Green y = 0.600 Blue y = 0.060 White y = 0.329
Established Timings:
800 x 600 @ 60Hz
800 x 600 @ 56Hz
640 x 480 @ 75Hz
640 x 480 @ 72Hz
640 x 480 @ 67Hz
640 x 480 @ 60Hz
720 x 400 @ 70Hz
1280 x 1024 @ 75Hz
1024 x 768 @ 75Hz
1024 x 768 @ 70Hz
1024 x 768 @ 60Hz
832 x 624 @ 75Hz
800 x 600 @ 75Hz
800 x 600 @ 72Hz
Manufacturer Reserved Timings:
1152 x 870 @ 75Hz
Standard Timing Identification:
#0: 1680 x 1050 @ 60Hz (B300)
#1: 1280 x 1024 @ 60Hz (8180)
#2: 1280 x 960 @ 60Hz (8140)
#3: 1152 x 864 @ 75Hz (714F)
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1680 x 1050 @ 60Hz
Pixel Clock.............146.25 MHz Non-Interlaced
Horizontal Vertical
Active..................1680 pixels 1050 lines
Front Porch............. 104 pixels 3 lines
Sync Width.............. 176 pixels 6 lines
Back Porch.............. 280 pixels 30 lines
Blanking................ 560 pixels 39 lines
Total...................2240 pixels 1089 lines
Scan Rate............... 65.29 kHz 59.95 Hz
Image Size.............. 433 mm 271 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Positive horizontal polarity
Descriptor #1 is Monitor limits:
Horizontal frequency range.......30-81 kHz
Vertical frequency range.........56-75 Hz
Maximum bandwidth unspecified
Descriptor #2 is Monitor name:
SyncMaster
Descriptor #3 is Serial number:
HSGP114030
=========================================================
thanks for any help!!
Mac Mini G4 Mac OS X (10.4.9)
Mac Mini G4 Mac OS X (10.4.9)

I had the exact problem you report with my core duo Mac Mini connected to a Syncmaster 204B. This problem persisted when I returned the monitor several times to Samsung for replacement 204B's. They eventually upgraded me to a refurbished 204T and the problem disappeared.
It seems to me that Samsung has some real problems with screen blanking when their monitors are hooked by DVI to certain Macintoshes. For anyone contemplating a Samsung monitor, I'd recommend another brand until it's known that this screen blanking problem has been resolved with all Samsung models.
Mac Mini Core Duo Mac OS X (10.4.9) 1 GB RAM

After updating to the ladtest OS my iPhone most time goes blank when I unlock it and does not recognize my finger print not show the passcode to enter. Screen just brightens up and stays blank.

after updating to the latest operating system on my iPhone 5s, often my screen goes blank and I am unable to unlock my phone. The phone becomes completely non responsive . Since I have the soft touch home button enabled I will either call Siri and ask to open an app which solves the issue or if I don't have Internet then the only solution is to switch off and then switd

Hello there, Prashanthds96.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an iPhone not turning on:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I4s goes blank when trying to message on hookt is anyone having same issue

My I 4s goes totally blank when using hookt . Does anyone have same problem and is there a fix ?

Hookt is a free ap thats like the BBM and allows I phones to chat with Black Berry users in the same fashion

My screen goes blank when I go into Itunes store

It's so annoying! I redeemed a gift card but cannot download anything, because the screen goes blank after literally five seconds. Any ideas?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

Viewer goes blank when selecting an adjustment

Similar Messages

Maybe you are looking for