Viewer not Updating

I was working in Color (1.0.4, with FCP Studio 2). Things were going smoothly. Then, all of a sudden, the effects I'm applying to the footage aren't showing up in the Viewer. I can see that the effects are still there. I can see that the white balance and contrast changes are in place, as is a simple keyframing effect, but I simply can't actually see them in the Viewer when I switch between grades on any of my shots. I'm seeing the footage play back untouched. This is the first time this has happened and I'm hard-pressed to find out if I accidentally hit a keystroke that disables live previewing. In setup, everything is as it should be. I've quit and restart, but that solves nothing.
Any help would be greatly appreciated.
Cheers,
Adam

Okay, for about one minute, after switching the scopes view off and then back on, I was able to toggle my effects using Control-G, but then, for whatever reason... it stops working. I'm wondering if there are any preferences files for Color, as there are for FCP, which can be deleted and which would be regenerated once Color is relaunched that might address this buggy behavior.
Help!

Similar Messages

  • Podcast List view not updated with iTunes 11.3.1.2

    Podcast List view not updated with iTunes 11.3.1.2
    Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
    iTunes 11.3.1.2
    After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
    If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
    A new episode is shown in the My Podcast view, with the correct number of new episodes.
    The new episodes are displayed in the All Unplayed view.
    I've tried deleting all episodes and downloading new episodes from the iTunes Store.
    I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
    Neither attempt resolved the issue.
    I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.

    it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.

  • Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

    After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
    The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook.  It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email.  I easily replicated
    this issue.  For reference:
    Exchange 2010 SP3 RU3
    Windows 7 x64 Ent
    Outlook 2013 (15.0.4551.1004) 32-bit
    I do see that SP3 RU4 has been released, however the only change listed is a security patch.
    Thank you for any ideas.

    Hi, Everyone –
    This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
    over half a year.  It was not fixed in the updates for Patch Tuesday this week.
    I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
    – I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all. 
    The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
    Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
    Regards,
    IT Helper

  • Views, not updatable???

    Have run the script demobld.sql in schema SCOTT/TIGER and created the following view
    SQL> @C:\scripts\demobld.sql
    Building demonstration tables. Please wait.
    Demonstration table build is complete.
    CREATE OR REPLACE VIEW empdept AS
    SELECT emp.empno, emp.ename, emp.job, dept.deptno, dept.dname, dept.loc
    FROM emp, dept
    WHERE emp.deptno = dept.deptno;
    select * from user_updatable_columns where table_name like 'EMPDEPT';
    OWNER     TABLE_NAME COLUMN_NAME UPD INS DEL
    SCOTT EMPDEPT EMPNO NO NO NO
    SCOTT EMPDEPT ENAME NO NO NO
    SCOTT EMPDEPT JOB NO NO NO
    SCOTT EMPDEPT DEPTNO NO NO NO
    SCOTT EMPDEPT DNAME NO NO NO
    SCOTT EMPDEPT LOC NO NO NO
    I don't understand why the view is not updatable for the columns from the base table EMP, they should be. Does anyone know what the problem could be
    Cheers
    Fergus

    Are you sure that you have all the primary keys and foreign keys correctly defined on those two tables?
    SQL> alter table dept drop constraint pk_Dept ;
    Table altered.
    SQL>
    SQL> CREATE OR REPLACE VIEW empdept AS
      2  SELECT emp.empno, emp.ename, emp.job, dept.deptno, dept.dname, dept.loc
      3  FROM emp, dept
      4  WHERE emp.deptno = dept.deptno;
    View created.
    SQL>
    SQL> select * from user_updatable_columns where table_name like 'EMPDEPT';
    OWNER                          TABLE_NAME                     COLUMN_NAME                    UPD INS DEL
    SCOTT                          EMPDEPT                        EMPNO                          NO  NO  NO
    SCOTT                          EMPDEPT                        ENAME                          NO  NO  NO
    SCOTT                          EMPDEPT                        JOB                            NO  NO  NO
    SCOTT                          EMPDEPT                        DEPTNO                         NO  NO  NO
    SCOTT                          EMPDEPT                        DNAME                          NO  NO  NO
    SCOTT                          EMPDEPT                        LOC                            NO  NO  NO
    6 rows selected.
    SQL>

  • View not updating in event receiver

    I have created a C# SharePoint 2010 Non-sandboxed project that implements the ListAdded event receiver. What I want to do is to check the new document library and add a number of site columns to it depending on the template. (I have discovered that the ListAdding
    event receiver is useless as the list reference is null at that point.)
    For each field, I run the following code whch successfully adds the columns. However, the code seems to have no effect on the default view.
    private void AddColumn(string name, SPListEventProperties properties)
    SPWeb web = properties.Web;
    SPField field = null;
    try
    field = web.AvailableFields[name];
    properties.List.Fields.Add(field);
    field.ShowInDisplayForm = true; // Saw these in an post about SP 2007. Not needed?
    field.ShowInEditForm = true;
    field.ShowInListSettings = true;
    field.ShowInNewForm = true;
    field.ShowInViewForms = true;
    properties.List.Update();
    var xx = field.InternalName;
    properties.List.DefaultView.ViewFields.Add(xx);
    properties.List.DefaultView.Update();
    catch (Exception)
    At the bottom of the method, examining properties.List.ViewFields in the Watch window shows that it is untouched by my code. What am I doing wrong? The UI confirms the fact that the the columns have been added and are available for adding to the view.

    Hi,
    According to your description, my understanding is you can’t add field to the default view in Event Receiver.
    I suggest you create a simple demo and try the code below to test whether it works properly.
    static void Main(string[] args)
    SPSite site = new SPSite("your site URL");
    SPWeb web = site.OpenWeb();
    SPList list = web.Lists.TryGetList("your list name");
    list.Fields.Add("Information", SPFieldType.Text, false);
    list.Update();
    SPView defaultView = list.DefaultView;
    defaultView.ViewFields.Add(list.Fields["Information"]);
    defaultView.Update();
    Feel free to reply to reply the test result.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • Content Viewer not updating

    I built a folio last week which displayed properly in Content Viewer.
    Since then, we have added more content to it. The build continued to work in Content Viewer, then all of a sudden, it stopped updating.
    I stripped the folio back to what it was before we added further content and it still wouldn't update.
    I left it during the weekend, then when I attempted to view it again this morning, Content Viewer still didn't offer an update.
    I've spent two hours this morning rebuilding the folio under another name. It appeard in the viewer and has given me updates every time I've added new content. Now, it has stopped offering updates and there is no way to test the folio, very frustrating and time consuming!
    I have attempted to download the folio in both the release version of Content Viewer, and in my own custom content viewer. Still nothing. The content is showing in Folio Producer, so I know it has succesfully uploaded.
    What is the solution to a non-responsive Content Viewer?

    hi Ragel,
    this doesn't seem to be happening to us any more.
    obviously we have another problem now...the certificates won't validate despite being walked through it by the dps tech team. this service is attrocious.
    we've produced two mags with adobe dps and both of them have missed the event they were designed for.
    WE WILL NOT BE USING ADOBE DPS AGAIN.

  • Materialized views  not updating

    I'm having trouble with getting a materialized view with fast refresh to update. I'm working between two schemas and have the global query rewrite privilege for both users. I've run the catrep.sql script to make sure it had been run and find that it has a lot of packages that don't compile, which I guess is expected as I'm not using Advanced Replication. I think the problem is that I can't get the dbms_snapshot package to compile so can't even update the view manually. Is there another script I need to run to make the materialized views work? Some other privilege or variable?
    I've granted permissions on tables, views, materialized views, triggers, and snapshots to both users.
    The log does get entries but never sends them to the views.
    I have a base table and a log on the table in schema 1.
    I have a materialized view in schema 2:
    create materialized view log on schema1.document
    tablespace app_mview
    with primary key
    ( list columns needed);
    create materialized view schema2.doc_mv
    pctfree 0
    tablespace app_mview
    storage (initial 128k next 128k pctincrease 0)
    refresh fast
    start with sysdate
    next sysdate + 1/1440
    as select * from schema1.document
    Does anyone know where my problem might be?
    thanks for any help

    I have temporary parameters, not in itit.ora but echoing the job_queue_processes is 10, job_queue_interval is 60.
    a sho err returns no errors.
    earlier I did not get anything new in dba_errors when trying to compile. Since I've rerun the catrep.sql I'm getting pls-00201 - identifier must be declared for a lot of dbms_snap, sys.dbms_alert, dbms_reputil2 etc. (package, package body, and trigger types) That is why I think there must be another script that should be run that I don't know about.
    I can't do a full refresh because the dbms_snapshot package will not compile. I believe it's possible that both full and fast will work once I get the dbms_snapshot package working.
    thanks for your help
    pat

  • Ribbon List Tools Views Not Updating

    Issue:
    The list views on a page layout does not refresh the "Views" drop down list in the ribbon.
    Version:
    SharePoint 2010 Version 14.0.7106.5002
    Steps to Recreate:
    Create a new site collection using the "Publishing" template
    Create 2 lists (Test 1 and Test 2)
    Add a new view to each list (Test 1 -> View 1 and Test 2 -> View 2)
    Create a page in the Pages library
    Edit the page
    Add the lists (Test 1 and Test 2) to any zone on the page
    Save and close the page
    Click anywhere inside the "Test 1" web part to enable the "List Tools" in the ribbon. Click on the views and note that you'll see "View 1" as you should.
    Optional (Click anywhere outside of the webpart to clear the "List Tools" in the ribbon)
    Click anywhere inside the "Test 2" web part to enable the "List Tools" in the ribbon. Note that the views shows "View 1" instead of "View 2".
    Any help on this issue is appreciated. If you can't recreate this, please let me know what version of 2010 you are running to help figure out if this has already been fixed.
    I have tested this in 2 separate environments. Both have the same issue.
    Update:
    I updated one of the environments to the latest (Dec 2014 CU), but the issue is still there in 14.0.7140.5000.

    Hi,
    Appreciate your detailed information to reproduce the issue.
    By following your steps, I  tested the issue in SharePoint 2010, SharePoint 2013 and Office 365, and reproduced the exact behavior everywhere.
    As my test, if you change the view of list in a webpart, the view will not refresh in the current page, and it will redirect to the relevant list. So to get different views of the list, I suggest you click the title of the webpart in current page to redirect
    to the relevant list, and then change the view of current list via Ribbon.
    Thanks for your understanding.
    Best Regards
    Vincent Han
    TechNet Community Support

  • KCLJ - Master Data upload - Purchasing views not updating

    Hi
    I have been trying to upload the external data file using KCLJ. The General view and FI view of the Business Partner is being created, but the Purchasing view is not being created. can anyone assist in how to upload this role?
    thanks
    Christopher

    Can you send us the structure that you are using? You may need to use the CHIND at certain places to upload values to certain tables.

  • Previews in Adobe Bridge in Essentials View do not update after manipulation in Adobe Camera Raw

    When I open a RAW file in Bridge and manipulate it in ACR, the preview is not updated in Bridge Essentials View.  The only way I can get it to update the preview is to open the file in "Preview" view, then it updates and looks fine in Essentials view.

    Is Bridge set up to store the ACR modifications to those XMP files? Only then it can update the preview right after working on it. Else you need to refresh the preview cache.

  • Valuation field not updated in Profit Center view

    Good morning Gurus,
    I am facing a big problem in KE24 report. As I've checked here, one of my valuation fields related to Raw Materials (VVM01) is only being updated in Legal View from CO. Even I check it in CE1SA01 table (my table for CO documents), the value is not updated there for Profit Center view. I've check all exits that we have here, but the problem is not there. Derivation rules for the field are not customized, so I don't know where is the problem.
    Anyone have already faced this problem? Could you please help me? Points will be awarded.
    Many thanks in advance,
    Diogo Patriota.

    Issue has been resolved.1
    Issue has been resolved

  • IPad calendar app day view does not update to "Today"

    Everyday when I open my calendar app in day view, it always show the last date when I view the calendar. It does not automatically switch to Today's date. In other words, if I open the calendar yesterday dec 24, when I open this morning dec 25 the day view still show Dec 24. The icon did change to 25 and Dec 25 is marked blue which means it knows that today is 25. However the day view still show 24. Can anyone please tell me what do I need to do to make the day view automatically update to whatever today's date is? Should I returned my IPad?
    Pleaseeee

    No one ever used the calendar app? Can someone please tell me whether or not my calendar app working correctly or do I need to get replacement for my Ipad (4th generation)?

  • Lighroom 5.4 Develop View does not update when changing sliders

    Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After going to "develop view" on any photo and changing the exposure or any other slider does not update the main view of the photo. It does however update the thumbnail in the film strip and the second monitor window correctly. I've tried everything I can think of:
    (1) downgrading to LR 5.3 (which used to work)
    (2) forcing 1:1 and standard preview regeneration
    (3) uninstalling the re-installing Lightroom (both 5.3 and 5.4)
    (4) Optimizing catalogue
    (5) Removing the Adobe AppData folder
    (6) Creating a brand new catalogue with zero photos, importing a single photo and trying to change exposure/contrast on that
    None of these result in the develop view of the picture changing when I change the sliders.
    Do you guys have any experience with this?

    The chances of me suspecting monitor color profile causing bugs in LR was very slim. =)
    So were mine, especially when only the view itself doesn't work, but all other stuff works fine. Well, I probably have really not good colour profile, luckly you can change it after the lr is launched - it won't cause the problem untill next restart (at least works for me). And hopefully once my calibrator arrives lr will work ok with its colour profiles..

  • What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

    what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!!  Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

    You should get your keyboard checked as it's repeating  on a lot of keys and makes you look silly.
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Viewer Builder update does not install

    The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install.  After downloading and removing Viewer Builder from the Applications folder, this update does not install.
    Steps:
    - Removed Viewer Builder app from Applications folder
    - Download update from Adobe Site
    - Click to install
    - Opens package and performed some kind of install activity. There are no prompts and quickly finishes
    - No Viewer Builder installed.
    Any insights on to this would definitely help.
    Adobe DPS on MacOS Lion

    upgrade folio builder tools does not work..
    this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
    this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
    2 days ago, I tried it on an other machine and it worked fine....
    regards..Anne

Maybe you are looking for