Viewer Window Doesn't Zoom Out

I want to crop down an iPhone footage, because it was shot vertical.  Using the crop tool I've reframed shot, but once I hit the done button.  It zooms in close to the shot.  It's baffling why it would do that.  I was unable to find a zoom out key...

"Double Tap Three fingers and Drag to Change Zoom"
Do this in conjunction to zoom back out.

Similar Messages

  • The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens.

    The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens. It also doesn't zooms in while pressing the home button to return. The gesture is just like any other Android phone. Like while closing an app by pressing the home button the icons seem like zooming in and falling back to their respective places. This thing happens in my friends' iPhones but this thing doesn't happen on my iPhone 5C. Please help.. I am unable to find anything wrong with the settings either.
    Message was edited by: Prats20

    I have another query though. Is it possible to always logged into my Gtalk from iPhone? I am using an app called Gtalk Lite. But every time I double press the home button and swipe up the apps to close them from running in the background Gtalk lite logs me off. I have to log in to Gtalk lite again. I was looking for something like that happens on Android phones. You are always logged in even after you close them from running in the background. And also is it possible to log in to more than one gmail account on Gtalk in iPhone?

  • Mail viewer window doesn't open

    Just bought a new Mac (of course, the new software comes out next month), I transferred my old stuff from Time Capsule, everything works except Mail. When I open Mail no viewer window appears. When I try to open one nothing happens. When I try to quit I have to force quit the application. Tried searching for resolutions, but everything that comes up is related to 10.5; cant figure out how to restrict the search to 10.7.

    I don't suppose it's already running? Try force quit just to see if it's running.

  • Macbook doesn't zoom out

    I was surfing the net and all of a sudden my screen zooms in. It's not where I zoomed in on the page but the actual screen/computer itself. I think I was pressing down one or two of the four keys (fn, control, alt, and command)and suddenly the screen is zoomed up. It's like another one of those keyboard shortcuts that I don't know about and now I can't get my screen to it's normal size. Wherever my mouse goes, the screen follows.
    Anyone know the solution?

    Hold down the Control key and two-finger scroll downward.

  • Cutting clips-zoom out-.wav exports

    Hi,
    When I cut a cilp from the timeline in Soundtrack Pro, apart from selecting all clips in the timeline individually or by name, is there not a way to make all the clips move to the left to fill the gap left by the clip being cut (as in FCP - delete) or in Sadie?
    Also, I can't zoom right out to see the whole sequence in the timeline. My project is an hour and a half long, but my timeline view is restricted fully zoomed out to what's in the blue box in the Global timeline view right? Is there any way of making this bigger so my project is just contained within the timeline?
    Finally, is there any way of exporting a .wav file instead of .aiff? At the moment I have to convert it from quicktime as Compressor doesn't seem to do it either.
    Many thanks,
    ant
    G5 2GHz dual, PowerBook G4   Mac OS X (10.2.x)  

    Thanks for the reply...
    1. cut a clip - sounds like you mean "ripple delete"
    That's right - strange thing is it doesn't seem to work with me! If I hit delete, it just takes out the selected section, and doesn't move everything in the timeline up to fill the gap.
    2. the zoom tool is a slider that is found at the
    bottom of the screen, slightly left. Works the same
    way as in FCP. You may have to slide it all the way
    to the left, then back all the way to the right
    My project's an hour long, and this doesn't do the trick unfortunately. It's still only showing a fraction of the project. The keyboard shortcut's (shift Z -fit sequence to window) is supposedly the same as in FCP but it doesn't show me the whole sequence in the timeline. There's no way is there of increasing the size of the blue rectangle in the Global Time View to show the whole of the sequence?
    3. STP isnt designed to export to multiple formats (a
    feature request for sure).
    Compressor, and all other creative type apps, all
    work off of Quicktime, its foundation technology for
    the whole OS.
    HTH
    Oh well.. I'll have to do it the long way for now.
    Cheers,
    Ant
    G5 2GHz dual, PowerBook G4   Mac OS X (10.2.x)  
    G5 2GHz dual, PowerBook G4   Mac OS X (10.2.x)  

  • I was viewing a page online, and somehow it zoomed out so the page is tiny in the browser window. How do I zoom back in?

    I was viewing a page online, and somehow it zoomed out so that the page is now tiny in the browser window. I've shut down all my windows and rebooted my computer, but every time I return to that page, it is still tiny. I've looked for a button to control the zoom, but cannot find anything. How do I zoom back out so the page is the correct size again?

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • Is there a way to zoom out the viewing window of mac applications?

    Is there a way to zoom out the viewing window of mac applications? I know for sure in safari I can zoom out, but it reverts to the original size as soon as I close out the window. I would really like to do this in safari and mail.
    Thank you.

    Try system Preferences/Accessibility/Zoom.

  • Konsole doesn't view well when I zoom the window of konsole

    I'm using KDE 4.8.4.Konsole can maximize / restore well.But it doesn't zoom well.When I zoom the window,konsole cannot view well.Sometimes it is white,or transparent.
    But when I change the window decorations of kwin to others like qtcurve.It works well.When the window decorations is Oxygen.It doesn't work well.
    I'm using catalyst,konsole 2.8.4.What should I do?Why does it happen?
    Sorry,I can't use English well.

    Sorry for my late update:
    cor-el, thanks for your suggestions, I've just tried with safe mode(by starting FF with "shift" held down), but things still don't work well. However, I did get some findings:
    * In either Safe or normal mode, when only 1 window of multiple tabs: if close window via "X" or "File"->"Exit", then no prompt.
    * In either Safe or normal mode, when 2 windows of multiple tabs:
    * * If close either window via "X", then it shows prompt :-)
    * * If close either window via "File"->"Exit", still no prompt.
    In all, 2 FF windows seem to work well for "X" button.
    I didn't try w/ more windows open, maybe same as 2 windows I guess.
    jscher2000, thanks for your sharing, too. It reminded me that the 2 closing methods are really different.
    Guys, looking fwd to more of your expertise sharing!

  • How to zoom out and view an entire track in the window

    There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

    Christoph Drösser wrote:
    Hm ... mine zooms out to more than an hour?
    interesting!
    I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
    so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

  • Fcp 7 Canvas window zoomed out

    Starting a project and the canvas window is zoomed out. Both canvas and viewer are at 25%. Viewer looks perfect viewing the file in the browser. I've had this problem before, but couldn't figure it out. I hope its an easy fix. Thank you!

    Set the scale of the display in the canvas by click on the left hand button at the top of the canvas and selecting the size of display you want. You can also select "fit to window" at the top of the list of scale sizes if you want it at maximum size.
    MtD

  • Keynote 6. Zooming out in Navigator View pointless because grey surround won't shrink?

    Keynote Navigator View allows zooming out.
    In Keynote 5 this was useful to make more space for Presenter Notes on screen. But zooming out is pointless in Keynote 6 because there is a grey surround which will not shrink. When the slide itself shrinks, more area of screen is given over to grey surround! This is quite simply bad design, unless I am missing some way to solve it. Any suggestions?
    Richard Dawkins

    Again, thank you, but again I'm afraid it doesn't do it. I had already discovered the little arrow thing you mention. The problem is that although it works fine twhen you pull it DOWN to INCREASE the grey area, when you pull it UP it won't DECREASE the grey area higher than a limited point. Try it after setting the zoom to, say 50%.The picture shows the highest point the little arrow thing is allowed to go. All that grey area below the picture is wasted.
    Richard

  • In Pages, on my iPad, how do I zoom out beyond the default view?

    In MS Word, you can choose a full page view which displays the entire document as a full page (it's zoomed out to where you can see the entire document plus a couple of inches  around the document).  Is this possible in Pages on the iPad?  If so... how is it done?
    Thank You!

    Unfortunately, it seems I am not going to be able to do what I want to do (as you mentioned, Demo) - like in Word, it's the "one page" view which allows you to, "zoom the document so that an entire page fits in the window" (see pictured).
    I guess I'll just have to adjust
    Thank you both!
    Amber

  • Continuous forest line speeds and zooms out or view NOT, but should?

    Here is my simple problem which I can not resolve.
    I will try to make as a detailed description as possible as I can not figure out which step needs to be corrected.
    I would like to create a landscape view as seen by someone on a sleigh ride down the hill.
    It starts with a winter forest extreme close up then trees start to move to the left ever so slightly, then speed up down hill and then decelerate and zoom out into a thin line on the horizon while slowing down but still moving to the left of the screen.
    The way I decided to create this scene:
    I created a nice multi layered file in Illustrator with all the trees overlapping each other. The file is to the maximum artboard width allowed by Illustrator.
    I imported this multi layered Illustrator file into After Effects as a Comp with separate layers.
    I assigned slight movement in the layers from right to left at various speeds. It gives a dimension to the view as you see one line of trees passing behind another at slightly different speed. This step does not seem to create any problems.
    I kept on building the continuous line of trees extending to the right by duplicating imported Illustrator layers until I reached the limit of After Effects Comp canvas size. I believe it was at either 30000 or 60000 pxls. The reason why I need trees so large is because at the beginning of the animation we see them at an extreme close up with all the leaves and branches visible. Then the forest line starts to move to the left and speeds up.
    Eventually it speeds up and zooms out at the same time enough to reach its end on the right. By this time the trees are at 50% of the screen size. So I import my tree layers again and match them perfectly at the seam and assign speed and scale so it continues to move past the viewer to the left and zooms out into perspective.
    And now everything goes wrong. I perfectly match the points of original tree line and the additional tree line. I see they nicely touch each other in the beginning of the movement and at the end.
    However unexpectedly in the middle they start to overlap each other and move slightly faster. For example: Left end of second forest line touches the right end of first forest line at the beginning at 10 sec and touches it the same at the end at 20 sec. However at 15 sec it speeds up and jumps ahead the right end of the first forest line. I tried to fix it by making a key frame at 15 sec and aligning them again. It resulted it two smaller jumps at 12.5sec and 17.5sec. If I keep on keying between the frames the left end of the second forest line continues to make little jumps in between. If I try to adjust the zoom out part it again messes everything up. I did set up my anchor point to the left side of layer.
    I thought the problem is with Scale, so I made layer 3D and started to reduce a Z dimension but got the same result. The layers jump on each other and it does not seem as one continuous movement.
    POTENTIAL PROBLEM: I did assign Easy Ease, Ease In an Ease Out, so my acceleration and deceleration have nice and smooth motion. However I tried to match the speed and velocity in Key Frame options window (double click Alt on PC opens this dialog window) between the original and the additional forest lines.
    I can not make this forest line long enough in a static window as I reached the width limitation of After Efffects canvas size. I need it very large as it starts at extreme close up and then zooms out to a and extreme horizon.
    I can not make it a moving line and keep on patching it up as movement does not match and lines start to speed up between the key frames and overlap each other.
    I though the problem was the combination of side ways right to left movement and zooming out motion (which I tried both ways: Scale in 2D layer and Z Dimension in 3D Layer) but I can not match even the linear speed of the forest lines from right to left. Perhaps there is a problem with how I am trying to match it.
    I will even rebuild the entire project if someone can list steps how to make one continuous line of patched up elements in sync, so they seem as one continuous image line.

    Hard to really grasp the situation without a few screen grabs, but some general thoughts:
    If all your elements are vector art from Illustrator, scale shouldn't be a factor.  Set your Illustrator layers to Continuously Rasterize, and you can move as close as you like to the layers with the camera and they will still be sharp.  Thus, you can work at an overall smaller scale, and not go beyond AE's 30000 pixel limitation.  Which also means you won't need to frame-match two environments.
    It sounds to me like you are overcomplicating the job.  Personally, I wouldn't combine camera movements and zooms - the potential that varied focal lengths will upset something is too great.  I'd just do everything with camera movement, using the X axis for left-right movement, and the Z axis to move closer or further toward your subjects.  After Effects cameras mimic the way real world cameras work, so it's best to approach the job like a real world situation.  Build the world, then animate the camera moving within that world.
    Remember that you can use Precomposed/Nested compositions to greatly streamline your work.  Make a clump of 10 or so trees in one comp, then use that pre comp nested multiple times within your main comp.  Don't forget to collapse transformations of the pre comps.

  • I put a windows xp cd in my mac book pro and rebooted the mac,mac doesn't start up any more and the cd doesn't come out,what can I do now?

    I put a windows xp cd in my macbook pro and rebooted the mac,mac doesn't come up any more and the cd doesn't come out,what can I do now?

    Hossein,
    As Guido said, you can  use BootCamp to partition the drive. If you want to install, or reinstall Windows. You would launch BootCamp and it will actually guide you through the installation, you will only need to decide how large a partition you want. I would use BootCamp, I would not use disk utility. When you have installed Windows and you want to boot into windows, when you start your MBP hold down the option key, this will give you trha option of booting Mac OSX or Windows.
    Joseph

  • Google maps don't display right, part is good but about half of it says "we are sorry, but we don't have maps at this zoom level for this region." Zooming out doesn't help.

    When displaying a Google map I get about four vertical strips that alternately display good and in gray bands. The gray area displays the message "we are sorry, but we don't have maps at this zoom level for this region." Zooming out doesn't get rid of the gray areas.
    I've had this problem for over a year and get around it by using either MS Internet Explorer or Google Chrome which work Ok. Otherwise Firefox works fine and I use it for everything else except Google Maps.
    I've tried an uninstall of FireFox and then reinstall but it didn't help. I don't remember what I was doing when this problem first showed up.

    You're welcome

Maybe you are looking for