Viewing ALL Open Work Items and Corresponding Approvers in System

Is there a workflow report in ECC that displays ALL open work items in the system at any given time and their approvers that need to take action?

Hi ,
SWIA -  You can give a status of the workitem ( Ready , Inprocess ...........), workitem type (dialog....)
in the selection criteria and also the time then you can find all the open workitems.
And also you can check Header table SWWIHEAD it includes all the information related to workflows
but this is a lenghty process need to process object type and need to refer so many attributes.
best way is need to create one report make use of it.

Similar Messages

  • Single work item view containing all different work item types

    Hello,
    I've been trying to create a view which should contain all different work item types that are assigned to "me" and not closed. I've created a type projection and the view itself and it displays all work items. The problem I've got is that I can't set a critera
    that only shows items that aren't closed as all work item types have their own statuses instead of one common work item status.
    Does anyone any ideas around how to solve this?
    Thanks in advance!
    /Alexander

    Hi,
    I can not justifiy to my clients to purchase an application from 3k to offer something that should be trivial in an application such as service manager. Furthermore, i need sort all my active work items (IR, SR and MA) in accordance with the target date
    calculated by SLO.
    The WorkItem class has a relathionship to the type SLA Information, but type 1 to many. Anyway I could create a view that displays work items and DisplayName field from SLA (basead on first row in the relationship). However I could not display more fields.
    If I  could display TargetEndDate and Status from SLA Information, it would be a reasonable solution for my client.
    Thank´s
    Juan

  • Can I report on the AGE of open Work Items? How? Group into Buckets?

    Is there a way to report on the age of open work items?
    Perhaps a bar graph that has several buckets.
    a.    Over 364
    b.    180 to 364
    c.    90 to 179
    d.    1 to 89
    And then a COUNT in each bucket. 
    For example, if a Work Item is open longer than 364 day, it would appear in bucket "a" as a count of 1.  Say there are a total of 45 Work Items that were opened older than 364 days, then "45" would appear in column "a" now say that there are 100 work items open that are 1 to 89 days old, then 100 would appear in the "d" bucket.
    Make sense?  How can I report like this?

    Hi mrpeepers,
    You can use following MDX script when you create this report that uses TfsOlapReportDS
    with
    member [Measures].[Age]
    As
    IIF([Measures].[Current Work Item Count]>0,DateDiff("d",cdate([System_CreatedDate].[Date].CurrentMember .name),Now()),null)
    member [Measures].[AgeRange]
    as
    case
    when [Measures].[Age] >70 then 70
    when [Measures].[Age] >60 then 60
    when [Measures].[Age] >50 then 50
    when [Measures].[Age] >40 then 40
    when [Measures].[Age] >30 then 30
    when [Measures].[Age] >20 then 20
    when [Measures].[Age] >10 then 10
    when [Measures].[Age] >0 then 0
    when [Measures].[Age] <0 then -1
    else null
    end
     SELECT
     non empty
     {[Measures].[Current Work Item Count],[Measures].[Age] ,[Measures].[AgeRange]}
     ON COLUMNS,
     [System_CreatedDate].[Date].[Date].AllMembers on Rows
     FROM [Current Work Item]
    And then, drop a Chart to report designer, select “Current_Work_Item_Count” as datafield,  AgeRange as category field.
    Best Regards,
    Ruiz
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Sincerely,
    Ruiz Yi

  • How do you view all open images without opening each tab?

    I have been using CS2 for ages, and recently switched over to a recent version of Photoshop. I'm using a mac. In CS2 I was able to drag my mouse to a corner of the screen and view all open files. Can I still do this somehow? Or do I have to open each tab to see the image? I'm looking for a quick way to view thumbs of all my images. Please help!

    If you dislike tabs turn off
    Photoshop > Preferences > Interface > Open Documents as Tabs
    Photoshop > Preferences > Interface > Enable Floating Document Window Docking
    And maybe try
    Window > Arrange > Tile

  • One of the user is unable to remove obsolete Tags from new work items and search query

    Hi I am new to TFS Administration, User has some obsolete Tags in TFS site which is removed on the Backlogs but user can see those tags when he is creating new work items and while querying the Work Items but he is not able to see any obsolete tags in Backlogs.
    TFS version: TFS 2013 SP2
    Steps followed:
    we queried each tags, we see 0 work items associated with the tags
    As per MSDN, we have to remove associated tags which automatically removes the Tags after 3 days
    The user is facing the same from past week
    Am i missing something? or will the list of Tags be available in new work items and  querying WITs? Please help
    Thanks in Advance

    Hi BE,  
    I tested this scenario in my TFS 2013 Update 4 Server, and found that Tags will disappear  from Tags dropdown list automatically after serverl days, if there’s no any work item associated that Tags. 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is it possible to view all open internal tables in the 4.7 debugger?

    Hello,
    Is it possible to view all open internal tables in the 4.7 debugger?
    Thx.
    Andy

    As far as i know in 4,7 there is no new debugger. But it is the new debugger which brings the functionality so i fear you go no chance.
    And for the rest who is still struggling on what OP meant: He meant the tab "globals" on the variables tab of the new debugger.

  • Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

    Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb.
    What is in this 1.4 gb ?
    I don't care much about ram, It's just that cpu usage spike like crazy by the end.
    ''Edited to remove swearing - TonyE''

    Hi musicfan,<br />Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
    Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
    *[[Export bookmarks to Internet Explorer]]
    You should not use old versions they are insecure. Security fixes are publicised and exploitable.
    * [[Install an older version of Firefox]]
    * https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
    *[[Send performance data to Mozilla to help improve Firefox]]
    Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
    *[[Troubleshoot Firefox issues using Safe Mode]]

  • BPE crash - Trying to remove work item and SXMB_MONI message that caused it

    Hi,
    I have a file to IDOC scenario with BPE.  We have had a large file that was picked up by XI in error, but the adapter engine did process the XML conversion successfully.  This message was sent to the BPE but due to the message size, the BPE crashed.  Currently the work flow that caused the crash is in started status in report RSWF_XI_SWPC - continue workflow after system crash.  and we have a message in SXMB_MONI for this workflow that is still in status outbound to PE "message being sent".  We would like to remove or cancel the workflow and the message in XI.  I have searched around for the best way to do this in this situation but have not found anything.  We cannot cancel the message in SXMB_MONI due to the status it is currently in.  Can we:
    1. stop and start BPM to resolve the issue or
    2. some how change the status of the workflow to error so the message in SXMB_MONI can be cancelled.
    3. Should we just leave the work item and messge as is, because it is not affecting anything else in XI.
    Any help would be apprecieated.
    thanks.
    Jamie
    Edited by: Jamie Bullen on Jan 22, 2008 4:04 PM

    Hi,
    Thanks for your reply.  I'm pretty sure I can delete the work item from SWWL but I don't think the outbound status of the message is SXMB_MONI will change once this is done.
    thanks.
    Jamie

  • How to view all open tabs?

    I know how to view all open tabs for one Safari window but how do you view all open tabs for all open windows?

    Bookmarks menu > Add These x Tabs to Reading List
    Click the Reading List icon:
    I think that is as good as it's going to get.

  • TABLE link between RPM Item and corresponding cProject

    Is there a table that shows exact link between RPM Item and corresponding cProject that is created automatically?
    Thanks

    use Table RPM_OBJ_LINK
    select on
    PROJECT_GUID= Item GUID
    OBJECT_TYPE = '0INMCPROJECT'
    Get cProject GUID from OBJECT_KEY.

  • Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

    Hello to you all,
    My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
    when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
    Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
    Please, should you have any solution please send me the details to [email protected]
    Thanks you a millionh times.
    Al.

    The MBA seems to cause several problems to several users on boot ups
    On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I  took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
    On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

  • Does the magic mouse not have the feature of viewing all open pages on desktop like you do when you use the side buttons of the wired mouse?

    Does the magic mouse not have the feature of viewing all open pages on the desktop like you do when you use the side buttons of the wired mouse?

    No, you'll have to use Mission control for that.  It's either located on the dock, the F3 key on recent laptops on a swipe on the trackpad.
    Regards,
    Captfred

  • Error while opening work item in Inbox sbwp for verifcaion of right invoice

    Hi,
    I am working on SAP workflow with IXOS.
    I faced  a problem in opening the workitem when it came into the inbox.
    In nomal scenario when i click on the workitem under workflow folder in my inbox, it opens the attached document in document viewer, i can see the attached document ,and after verifying it ,i can furher process it.
    But now when i click on the work item in my inbox it directly takes me to the next processing window, without opening the attached document for my verification, so i am unable to check that i am processing the right invoice.
    Please help.

    Yes, it was working fine before.
    And also the problem generally rise in afternoon.

  • Magic Mouse need view all open applications....

    is it possible to have the same option to view the open applications in the new magic mouse, im a programer and always in need to haver several applications and run between them ... just bought the magic mouse its great loving it , but please insert a command to view all the open applications PLEASE
    Message was edited by: FranciscoCarlao

    A few hours later…
    I just found Mouse Wizard:
    http://www.samuco.net/web/node/23
    I will say that when I downloaded the demo the center button didn't work, but a very quick & courteous reply from their tech support suggested:
    In terminal, can you try entering this command: "rm ~/Library/Preferences/.MagicalWizard.plist". Then, relaunch MouseWizard.
    I did this & now I have center button nirvana! (Mouse Wizard also supports a version of the squeeze button (they call it fourth button) and squeeze/bloat gestures.)
    So far so good--it's made me much happier with my magic mouse.

  • HCM Forms&Process :Authorization error while opening work item in the UWL

    Hi,
    The process has been started successfully and the work item was appeared in the  UWL of MSS.
    But when I try to open the work item  , I got the following errors:
    "User XXXX doesnot have authorization on pernr 8000123"
    "You are not authorized to process this process"
    When I checked, the User XXXX has the required roles for authorization such as SAP_ASR_MANAGER and SAP_ASR_EMPLOYEE and the authorization object P_ASRCONT has been assigned to it as well.
    Still why these errors are coming?
    Does anybody know about it?
    Thanks & regards,
    Lek

    Hi,
    I have had exactly the same error. Make sure you have read the help.sap.com documentation carefully:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/3d8f8118391bcbe10000000a1553f7/frameset.htm. The minimum requirement is access to one infotype (it does not matter whether there is data in the infotype and it does not matter which infotype you choose) via CHECK_MIN_PERNR_AUTHORIZATION of BAdI HRPAD00AUTH_CHECK. More specifically, we solved it be providing access to infotype 0002 to all employees.
    Furthermore, check what level of authorizations you have set in the config for the activities.
    IMG->Personnel Management->HR Administrative Services->Authorizations->Define Authorization Method for Activities (All Processes) or Define Authorization Methods for Activities (for Each Process Group).
    This should help you solve your problem.

Maybe you are looking for