Viewing and printing PDF files

I"m trying to print a PDF,  get hit with this pop up below, and can't get past it:
"Before viewing PDF in this browser you must launch Adobe Reader, accept the End User Licence Agreement, then quit and relaunch browser"
Adobe Reader has been installed, and no agreement presents itself.
Advice appreciated.

If you don't know how to lauch Adobe Reader, let us know whether you are on Mac or Windows.

Similar Messages

  • How do i view and print pdf file in mac osx with ff4.0?

    How do i view and print pdf files in ff 4.0 on a mac with osx. for some reason the updated ff version does not support it. Makes no sense that something that worked in an earlier version now does not...
    Thanks,
    Ron

    Please don't post the same question multiple times!

  • How to view and print pdf files

    how to view and print pdf files

    Download and install Adobe Reader: Adobe Reader Install for all versions
    Open the PDF file using it. If security restrictions don't prevent it you could also print it.

  • How do I view and print pdf files

    I am using FireFox ver 12 on a Mac and can not view or print pdf documents. I have installed PDF Viewer 0.2.5 plugin but it does not appear to work.

    I disabled the PDF Viewer plug-in and set my Application preference to use Adobe Reader for pdf files. All is working fine now.

  • Problem viewing and printing PDF files in Preview

    I have a document that was created in Adobe InDesign (CS4) with a photo that was converted to Grayscale from a CMYK image in Photoshop (CS4).
    That document was then Exported from InDesign as a high print quality PDF.
    Now when I open the file in Preview the photo appears on the screen as a "Negative" or "Reversed" image. And if I print the document, it too prints as a "Negative/Reversed" image.
    I don't know if this matters but if I send this document in Apple Mail it too previews as a "Negative/Reversed" image.
    Other that this photo everything else in the document (text and color logos) displays and prints fine.
    Any ideas?

    I have exactly the same problem with PDFs containing bitmaps created by Illustrator CS3 (and CS4) -- the bitmap appears as negative.
    It has to do with the compression method used for the bitmaps in the Adobe PDF creation. If it is JPEG or JPEG2000 the problem occurs, if it's ZIP or no compression, the image is fine.
    If have reported this to Apple as a bug already.
    10.6.2 has NOT fixed this behaviour.

  • How can I open and print PDF files?

    How can I open and print PDF files?

    With the free Reader if they are not print protected. With Acrobat otherwise.

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • I can't view or print PDF files anymore.  This just started in the last 3 months., I can't view or print PDF files anymore.  This just started in the last 3 months.

    Since May of this year, I have been unable to view PDF files or print them.  I have downloaded the latest Adobe and Firefox.  I had a long talk with a tech from Scottrade who gave me a bunch of ideas, none of which helped.  HELP!!

    TO MARK,
    To tell you the truth, until you asked the question, I never heard of Preview.  In trying to open the AP, I saw that it had never been opened and I couldn't open it when I tried today.  Can you shed any light on this?

  • View and print PDF differently?

    Hello all,
    I'm wondering if there is a way to create a PDF booklet so that when viewing it, you would see page 1 first, then page 2+3, 4+5, 5+6, etc. as 2-page spreads - BUT, that when printing it, the file would print each page on 8.5 X 11 so you could staple them together to create the booklet.
    I can create the booklet as 2-page spreads, which is what I want, but then when printing it, I can only print the spreads together as I view them, with both pages of the 2-page spread on one 8.5 X 11.
    If this makes sense, my question is whether you can set Acrobat Pro to display the booklet one way, but print another?
    Thanks for any suggestions!

    Download and install Adobe Reader: Adobe Reader Install for all versions
    Open the PDF file using it. If security restrictions don't prevent it you could also print it.

  • Problems Viewing and Printing PDFs Created from FrameMaker

    I got no responses to this issue in the Acrobat forums (I posted 6 days ago), so since at least some of the PDFs were created through FrameMaker, I am posting here to see if anyone in this forum has seen the problem.
    At our company, we regularly create PDFs, usually from FrameMaker version 9. In most cases, we have no problems with the PDFs, but once in a while, we are notified that customers get the following problems:
    If they try to print the PDF, they see a series of messages which consistently include "The document could not be printed" and "There were no pages selected to print." If they choose a page or range to print, this often works, but certain pages will not print. In one case, I saw a message saying there was a problem with the PDF with the number 14, but this does not always appear.
    Often, the pages that will not print, when viewed at a normal magnification, appear as very small thumbnails that look like the dotted line down a black highway. The rest of the pages are at a normal magnification and can be read.
    Often, these same PDFs crash when certain bookmarks are clicked.
    This always seems to happen when the PDFs are viewed within a browser on our website or in our web-based software. I've been told by our tech group that it happens in other browsers, not just Internet Explorer, and it still happens if they save the PDF out of the browser down to the desktop and try printing from there.
    In the cases I've seen, when I go back and look at the original generated PDF file in Adobe Reader or Acrobat (not within a browser), none of these problems occur. Redelivering the file to the web location often fixes the problem.
    I've read many posts about this in various locations on the Internet and one in the Adobe Forums, but none seem to come up with the cause to this problem - they just come up with workarounds for printing the file.
    One other note - one of our engineers and tech writers found that one PDF with this problem appeared to have Fast Web Viewing turned off, even though nothing was done differently when the PDFs were generated.
    Does anyone have any information on what causes this problem and how we can avoid it?
    Tammy

    I'm not sure why, but my original post came through blank. Here is a
    second attempt:
    > Often, the pages that will not print, when viewed at a normal
    magnification, appear as very
    > small thumbnails that look like the dotted line down a black highway.
    The rest of the pages
    > are at a normal magnification and can be read.
    I almost didn't reply to your post because I'm not sure that I am making
    anything but a wild guess. But I seem to recall many years ago that
    there were some reports on the frameusers.com listserv of some PDF pages
    showing up as tiny pages-- similar to what you describe. I'm not sure if
    I can trust my recollection, but I THINK the fix was to go into the PDF
    printer properties, and reduce the dpi setting from 1200 to 600 or even
    300. I don't remember the exact reason, but I think it had something to
    do with a problem in the way Windows GDI interacts with documents
    containing large-size type (such as 72-point glyphs). Anyway, I may be
    remembering it wrong, or may be off on the wrong track altogether, but
    it won't hurt to make the change and try. You can always change the
    setting back.
    And if it doesn't work, consider posting your operating system, Acrobat
    version number, and whether or not FrameMaker 9 is fully patched. It
    might help someone else chime in with help.

  • Open and print pdf file through form 6i

    I want to run and print a pdf file through the form. Any suggestion please......
    thanks in advance....
    ifti

    you could try using the DDE package to open the file
    and then print from the actual file location using a host command.

  • Importing and printing PDF files

    I've got a long list of PDF files and I want to create a generic design where I can import one of these files and then print it. I've accomplished this with .txt files using either ^file or ^passthru but it won't work with .pdf Hard to believe an Adobe product can not handle .pdf
    Is there a way, please let me know.
    Thanks
    Ståle

    I am wanting to do the same type of thing with .pdf files. Could you share with me how you were able to get the ^passthru command to work with .txt files? I cannot get the ^passthru command to work at all with any type of file. Where does the ^passthru command go in my dat file? Do I need to make any changes to my design (.ifd) file to accomodate the file I'm wanting to include?
    Any help is greatly appreciated!

  • Problem saving and printing pdf files.

    Operating System Windows 7.  Adobe Reader Version XI. Online and local files. Browser XI. Adobe sends ERROR message on ALL pdf files.  Adobe seems to recognize all pdf files as "coded incorrectly," and sent by email, when the majority haven't been sent by email.  It will not save the pdf as a pdf, but saves it as "All Files," instead.

    How are you downloading these files?  Also, what exactly means "an error message"?

  • Can't open and print pdf files

    I can't download or open pdf files. says if reader is running try again   also can't uninstall 8.3      says patch package can't be openned  verify this is a valid package and  it exists and I can access it. also contact vendor to verify this is a valid patch package

    We can't know anything without some system info and other details liek what versions of Reader/ Acrobat you are actualyl referring to. Your post is pretty confusing...
    Mylenium

  • Viewing and printing a PDF file from Java Swing Application

    Hello,
    I need to view and print PDF files from Java Swing Application.How do I do that?I appreciate your help.
    Thank you
    Sumana Somareddy

    If you have a link to the URL pointing to the PDF file, you can allow the browser to open it. Then use the print function of the browser to print the PDF document.
    Regards,
    Tak.

Maybe you are looking for

  • HT201401 My iPhone battery drains faster and I connected it to power it shutdown and restarts in several times

    iPhone restarts several times while doing the charging

  • About Object Array!

    why can't this diplay the elements of the ObjectArray in String? the output is: [Ljava.lang.Object;@17943a4 Why?? THANKS!! public class testing {     public static void main(String args[]) {         Object [] ObjectArray={new Integer(10),new Integer(

  • Character Palette Berzerk

    When I go into the Character Palette, set the View to All Characters & click 'by Radical' the palette locks up completely. I can still turn it on/off thru the menu, as well as turning off the pref altogether. But as long as it remains on it periodica

  • Generate Data subscription only if data present

    Hi, I would like to create an email only when there is data. It's an exception report, so only need to generate an email if there is data. I could possibly do it by selecting the option 'When the report data is updated on the report server' for deliv

  • Where can I find 'old' version of ATI catalyst 8.11

    I think I'm not the only person who can't use the current version of catalyst with arch64 (2.6.28 kernel). It starts first time but on repeat starting it gives black screen and I can only reboot by log in with ssh. The previous vesion of catalyst wor