Viewing and uploading documents when using a business package in the portal

DMS works fine in the ECC backend and we are able to create and view documents but when attempting to view a document via the Business Package Maintenance Supervisor or Maintenance Technician, error returns with "No originals available for the document". we are using Enh Pack 3 but can find no configuration advice in the Business Package technical configuration. Did a search here but could not find anything specific. Any help appreciated

Hi Frank,
When you upload document into SAP DMS, you need to check-in these for storing into repository. Have you checked-in documents? if not then these documents can;t be retrieved by the system. Kindly check and revert back on this solution.
Hope this will help.
Regards,
Ravindra

Similar Messages

How to install a business package in the portal ?

Hi everyone,
I am a beginner in SAP Netweaver Portal, and i have a question :
How to install a business package in the portal ?
Thanks & regards
Hassan

Hi Hassan,
Well i would like to quote one more point here, although you can import a buss pack into the portal but there are some std methods to be followed for every thing in portal, When it comes to deploying a busines package, you should always do it from SDM only !! although we can use import facility. now let me tell you the difference between the two. When you use import, you are just putting the contents into the portal and not deploying it, where as using SDM you deploy the SCA files on your portal totally. you must be knowing that business packages are always delivered in SCA formats.
Regards,
Ameya
Message was edited by:
Ameya Pimpalgaonkar

Unable to import CRM Business Packager in the Portal

I have downloaded the Business Package for CRM, but it was in Zip file.
I was unable to import it in the Portal since EP6 format has to be in epa not zip?
Please advise.
AA

Hi,
CRM 4.0 Business package is available for EP 5.0 and above. When importing the business package do pay attention that you import a zip file that contains objects that are EP 5.0 version compatible such as files ending with the "PKG" extension. "EPA" extension is acceptable from EP 6.0 on.
The package content will be available at "migrated content" in your PCD, after the import process is done.
Regards,
Haguy

My iPad says that she is busy and is unable to accept my request even when everything is closed and nothing is being used. What might be the problem here?

My iPad says that she is busy and is unable to accept my request even when everything is closed and nothing is being used. What might be the problem here? 3 times my iPad has crashed while nothing was open or running and a small loading wheel would be moving signifying that the thing was loading something without permission. Even when the dang thing was on my personal wireless service that I pay for.

similar to what is happening to me....the difference is, after restoring itunes detect ipod and ask to restore again and again....
I know it may look kinda stupid but: just leave the ipod there for about 2 minutes, that's about the time my itunes is taking to detect my ipod...if it doesn't work, try connecting ur ipod to other computer with itunes (no need to sync, just to check if itunes will recognize) to check if the problem is with the ipod or with the itunes and/or computer.

How can one read a Excel File and Upload into Table using Pl/SQL Code.

How can one read a Excel File and Upload into Table using Pl/SQL Code.
1. Excel File is on My PC.
2. And I want to write a Stored Procedure or Package to do that.
3. DataBase is on Other Server. Client-Server Environment.
4. I am Using Toad or PlSql developer tool.

If you would like to create a package/procedure in order to solve this problem consider using the UTL_FILE in built package, here are a few steps to get you going:
1. Get your DBA to create directory object in oracle using the following command:
create directory TEST_DIR as ‘directory_path’;
Note: This directory is on the server.
2. Grant read,write on directory directory_object_name to username;
You can find out the directory_object_name value from dba_directories view if you are using the system user account.
3. Logon as the user as mentioned above.
Sample code read plain text file code, you can modify this code to suit your need (i.e. read a csv file)
function getData(p_filename in varchar2,
p_filepath in varchar2
) RETURN VARCHAR2 is
input_file utl_file.file_type;
--declare a buffer to read text data
input_buffer varchar2(4000);
begin
--using the UTL_FILE in built package
input_file := utl_file.fopen(p_filepath, p_filename, 'R');
utl_file.get_line(input_file, input_buffer);
--debug
--dbms_output.put_line(input_buffer);
utl_file.fclose(input_file);
--return data
return input_buffer;
end;
Hope this helps.

How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

Hi,
How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
Note : I have created custom Content Type since I have custom columns along with upload column..
Regards, Shreyas R S

go to library settings
Change new button order and default content type
set your custom content type to be #1
when you upload new document it will automatically have your custom content type
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

I want to upload documents from my pc (windows vista) to the cloud so I can see and edit them on my iPad 3. How do I do this?

I want to upload documents from my pc (windows vista) to the cloud so I can see and edit them on my iPad 3. How do I do this?
I have the cloud on my pc and I've moved documents to it, but they don't update when I update the one on my pc.
And I don't know how to get them on my iPad. I have the new ios7, btw. Just got it but couldn't find my documents with ios6
Thanks

You can upload files to Dropbox and edit them with Quickoffice Pro HD.
http://i1224.photobucket.com/albums/ee374/Diavonex/aed9d078ffa732f02b48eebd3b723 95d_zpsa0036f7b.jpg

IPhone Wifi and Bluetooth interference when used simultaneously

I am presently using AirFoiI to stream audio from my PC to my iPhone. AirFoil uses the same protocols as AirPlay. AirFoil/AirPlay streams an Alac audio codec using a bandwith of 1,50 Mbs on average irrespective of the audio codec and bit rate of the source file.
The audio stream received on my iPhone through WiFi is send over simultaneously to my Bluetooth speaker.
When using AirFoil/AirPlay, I regularly hear distortions at the beginning of a track and also randomly when a track is playing. The distortions are a lot more when I move the iPhone around. I am almost 100% sure that these sound distortions are because of Bluetooth interference on the iPhone itself when simultaneously receiving an audio stream from AirFoil/AirPlay and sending an audio stream over bluetooth to my speaker.
I also have done some tests using "Net Meter" and "TCP-view" from Sysinternals on my Windows 7 PC. On "Net Meter" I have never seen any WiFi drop outs or distortions regarding my home network.
My bluetooth speaker supports the A2DP AAC audio codec. This was an important feature for me before I bought the device because the AAC audio codec provides normally a relatively good audio quality over Bluetooth. At the time it did not occur to me that there might be a possible Bluetooth interference coming from my iPhone itself. I presumed that the Bluetooth on the iPhone would use a 2,4 Ghz RF channel not in use by WiFi so that WiFi and Bluetooth used on the same device simultaneously could never distort each other. I was clearly wrong. Put shortly, the problems I encounter are presumably solely caused by the firmware/software on my iPhone. I hope this will eventually be resolved with some future iOs 8 updates. There were indeed many people having Bluetooth issues since iOs 8.
I know the best solution would be to wire my speaker optically with an AirPort Express or an Apple TV. I have not yet decided between the two.
Even when there exists a "wired" solution, I think an expensive device such as an iPhone should be able to make sure that there is never interference between WiFi and Bluetooth when used simultaneously on the SAME device/iPhone.
I hope that some specialists will give their views on my "nonprofessional" analysis and some more in-depth information.

Now will this work:
Airport extreme set to BOTH frequencies and my older wifi stuff like Iphone and printer will automatically connect via 2.4GHz and Macbook will connect to 5GHz so that it will not longe be disruppted by bluetooth?
Unfortunately, no one can predict exactly what will happen in advance with wireless and interference issues. Your chances will improve, though. It might be a good idea to understand the store's return policy before you buy.
What if the Macbook will not connect automatically to the 5Ghz network because the 2.4 stream may be slightly stronger. Is there a way to force macbook to connect to 5Ghz?
Yes, use the option to assign a separate wireless network name to the 5 GHz band, and then "point" your MacBook to that network. The other 2.4 GHz devices will connect to the 2.4 GHz band.

How can I download Firefox onto a disk from my Windows PC, and then take the disk to my Mac and upload it to use on the Mac? Safari does not work anymore.

My Mac assures me that I am connected to the internet, using Airport and also ethernet, but Safari never gives me a home page. Can I download Firefox onto a disk using my Windows PC and then take the disk to the Mac and upload Firefox to use on the Mac ?

You can grab a "full" installer (.dmg file) from this page (scroll down to your preferred language):
https://www.mozilla.org/firefox/all/

Just purchased a new iMac and transferred all info from my old iMac. Now when using iPhoto slideshow is displays the pictures in reverse order.

Just purchased a new iMac and after transferring all info from my old iMac. Now when using iPhoto slideshow it displays the pictures in reverse order.

There's a bug in iPhoto 9.5.1 and Mavericks that affects slideshows played directly from an album. The slideshow will not play correctly if the photos have been sorted manually. Any other type of sort, date, rating, keyword or title, will play correctly.
If you need that manual sort of pictures for your slideshow create the slideshow in iPhoto's slideshow mode.
OT

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Will a iphone purchased in Singapore be covered under complete hardaware and software support when used in India

Will a iphone purchased in Singapore be covered under complete hardware and software support when used in INDIA

See Here > http://www.apple.com/legal/warranty/

My keypad keeps disappearing when using google -- but only in the horizontal position. In vertical, it works fine. I have powered off and on, checked that Safari Instant is on, and cleared Safari cache. Any help will be appreciated.

My keypad keeps disappearing when using google -- but only in the horizontal position. Vertically, it works fine. I have powered off and then back on. I have checked that Safari instant is on, and I have cleared Safari cache. Nothing has worked so far.

Okay -- it fixed itself. Without any intervention, after all else had failed, and I was willing to live evermore with vertical searches. If only everything else in my house mysteriously recovered from the broken state.
Have no idea what was/is going on with the disappearing keypad.

Viewing and uploading documents when using a business package in the portal

Similar Messages

Maybe you are looking for