Viewing call details for International calls

Hi,
I have been using Verizon Wolrd plan for making International calls and still unable to view my call logs (until I get my monthly bill). Called support group so many times and explained this issue and as usual got different types of reasons for the lack of call detail info but never got the solution to my problem. Are there any plans to fix this issue? ..
Thanks
Sampath (Sam) Vanamamalai

We can definately take a look at that. I have sent you a Private Message so I can get your account info.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Set up prepaid calling card for international calls?

I have a prepaid calling card that I use for calling international. The way it works is that I have to call a 866 number, followed by entering a 10 digit code, and then proceed to calling the actual number (with international prefix codes). Is there a way to set this up as international call default so that I do not have to modify all my international contact's phone numbers to include this procedure?
Thanks.
K

speed dial: Your smartphone can store nine
phone numbers that you can call
with a single keypress. To store a
speed dial number, touch Phone
> Menu > Speed dial setup, and
insert a number in an empty speed
dial slot.
To call a speed dial number, touch
and hold the single-digit speed dial
number in the dialer screen.

UC320W - Call restrictions for internal calls

Related to my previous post (19 Oct one way audio). Do i need to add the internal dialling key code (eg 2xx) to the call restrictions? I don't see it in any of the full, expanded or basic privilege levels. If so, how do i add this? I am using firmware 2.3.2(6)
Thanks

Hello Mick,
Can you please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our Engineers should be able to assist you with this issue.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Thanks,
Nagaraja

Obscene Prices for International Calls!!! What a Rip-Off!!!

I just took a look at my very first bill and to my surprise, my 10 year old had attempted to make 6 (1 minute calls) and 1 (29 minute call) to England to speak with her father. I admit it was partly my fault because with the last company they could just pick up the phone and call their father and I neglected to tell them that they could not do that anymore. Blah, blah, blah.....my 1st Verizon bill is $220.00 (@$100 or so in long distance charges for basically 1 call).
I called customer service to get some kind of relief but nothing. The advisor said that the billing is done by a 3rd party and that verizon can not do anything about it. I was a loyal Verizon cellular customer for 2 years, paying my bill on time and all and this is how they treat me.
I'm sorry...I know this blog si probably for people who have real issues but I needed to vent my frustration!!! I guess it's time to look for another carrier or go back to old one. For the sake of my sanity and wallet, I had a block put on my phone for international calls but how nice it would have been for Verizon to step up and do the right thing. They could have atleast put me on the international plan and backdated it!!!! GRINCH!!!! BTW, 1 minute call to England is $2.89 so don't make the same mistake!!!!

I feel your pain. I'm in bill shock too. I made one phone call to China and my bill was $200. When I called Verizon for help, they refused.
Actually the FCC received so many complaints about this issue related to cell phones that they were going to pass a law to regulate it. As a preemptive measure, many wireless carriers voluntarily agreed to send text messages to users when their charges were approaching their monthly limit. Unfortunately, there was no such action taken for landlines. Hence your and my situation.
It certainly would be a smart business decision for Verizon to include a voice alert on landlines warning you of the rate you are about to incur, as it would prevent these situations from happening, but they have yet to do so. Every time they do something like this, they lose a long-term customer for a quick profit.
Verizon is aware of the problem. It happens to millions of customers a year. But until people like you and I put pressure on the FCC to regulate them regarding landlines, nothing will change. So I encourage you to contact http://www.fcc.gov/

Accept step causing issue for internal calls

Hello,
We have been using Cisco IPCC for several years now to handle calls from external customers.
Now we like to use it also to handle calls to our internal helpdesk but face the issue that the IPCC will not accept any internal calls.
After initial troubleshooting, we find out that, for internal calls, the script will just fail at the very first "Accept (-- Triggering Contact--)" step !!!
This executes without problems when calling the same application/script but from external phone.
So far we have been unable to find out the root cause. Any idea ?

Hello,
My guess is that your problem is codec because you said that the call is dropped , all the way , check the codec and check what Anthony said.
In case you have a codec mismatch , you have to do one of these two:
1- configure a transcoding resources
2- make a device pool and a sperate region with a location that every other region can talk to this region (UCCX region) via a one codec , in this case you will not get the call dropped.
Amer

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

All six Uk carriers carry the iPhone officially and micro sims are very common therefore
PAYG is very common in UK every carrier offers a number of packages but all commitment free
http://support.apple.com/kb/ht1937
List of Turkish Carriers within this doc

I paid for international calling and my phone want do ****. ned help have kids at home

In Punta Cana Dominican Republic this week. I am unable to make calls with my phone. Paid for international calling. Unable to call customer support

We know how important it is to get service while you're traveling, kilmurry. What happens when you try to place a call or sent a message? What model phone do you use? Our Global Team can also bee reached toll-free from a landline while you're traveling following the steps at http://vz.to/18oaptS. JenniferH_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Could facetime be used for international calls and free of charge???

Could facetime be used for international calls and free of charge???
Or does it work the same way as any other 2G calls???

For the iphone 4, I believe that have to do a initial voice call first (if it's not in your recent call list), and then start the live video chat (facetime). I could be wrong but if you have no recent call history with facetime, you would have to start a voice call again, and then immediately switch to facetime to prevent international cost. I haven't tried this so I would not now, but I only assume that if you don't have him/her on the recent list with facetime.

You'll be able to view billing details for this ac...

Is there something wrong with the online accounts, or is it just me getting the message:
You'll be able to view billing details for this account within 48 hours.
If you can't see them after 48 hours, please use a different log-in or create a new profile.
Solved!
Go to Solution.

Looks like you're on your own minusdot
Did you get access to these ok now? If not let me know and I'll get on the case for you.
ta
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Call gate for systems call

Hi all,
On solaris-x86 The /usr/include/sys/segment.h file has the following user selectors
/* user selectors */
#define USER_CS 0x17 /* user's code segment */
#define USER_DS 0x1F /* user's data segment */
#define USER_SCALL 0x07 /* call gate for system calls */
#define USER_SIGCALL 0x0F /* call gate for sigreturn */
#define USER_ALTSCALL 0x27 /* alternate call gate for system calls */
#define USER_ALTSIGCLEAN 0x2F /* alternate call gate for sigreturn */
USER_SCALL(0x07) and USER_ALTSCALL(0x27) are both used as call gates for system calls in ld.so and libc.so(primarily 0x27 but 0x07 is used once). A static executable seems to use 0x07 exclusively. My question is whether there is any difference between the 2 call gates ? The system call semantics seem to be the same for both(syscall no goes in %eax and followed by lcall <call-gate>, 0x00). Can I substitute one for the other and will the executable still run ok ?
Thanks
Naveen

Hi Michael,
first of all the connection to an ABAP system via portal system object as you have used it in VC7.0 should also work in VC7.1. Maybe there is an issue with your configuration. There is also another option to setup the connection via RFC connection in the SAP NetWeaver Administrator. Anyway I suggest that you try to establish a connection via RFC, which is described in the [Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]. If this connection will work then you should investigate why the connection via system portal system object is not working.
Please let me know if you have success with the RFC connection.
Best Regards,
Marcel

Have international block on and still charged for international calls?

Hello -- I've international call block switched ON my account from April. Couple of customer reps confirmed and even today when I called they confirmed that international call block is switched ON for my line. My daughter plays around with my phone and unfortunately we got a bill of $350 for June even though international call feature is disabled. What does international call disable means? Any one have same issue?

Hi there! @nkrishna16 thanks for posting your concerns. I’m sorry to hear you’ve had issues with your international block.
So I can further assist you, please private message me by clicking here and provide me your name, the phone number with the block and whether this was an inbound or outbound call.
Thanks!
Charise

Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name. How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated! Thanks, Akhanbilal

Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact." Instead it dials them. Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items. I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work. On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10. The Toyota entune is LOOKING for a music and will LOCK-UP if none are found. By giving it this, it worked on my 2013 Toyota entune for the 1st time ever. Yeah ! It is a little frustrating every few minutes listening to myself say HELLO. But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC. I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself. Then, you must choose some connections in the pairing section of SET-UP within Navigation itself. If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10. Red-headed step-child is what we all are. Have to help each other. Arsen I appeciate you helping all of us. Seems the list is about 20 who have voiced it here in this one thread. We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5. I chose phone and internet. Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP. But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as a result. Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune. No App. Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

How to disable "slide to call" feature for missed calls from lock screen on ios7

I realized that when the iphone (running iOS7) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode).
it is nice feature for people who don't care about locking their phone.but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
This is a serious security issue.it should be user configurable.
Hope Apple will take it seriously and release a update for the same.

You can provide feedback to Apple here: http://www.apple.com/feedback/iphone.html

Option to disable the "slide to call" feature for missed calls from lock screen

I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through.
At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
I was wondering if anybody else feels the same way about this? or have a solution?

I share the same feeling with you about this issue.
Actually I was very surprised when I discovered that!
In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
This is a serious issue that Apple has overlooked!
Please secure the iOS 5.
Thanks.

BB Os v. 7.1 - Caller ID for incoming calls NOT displaying name from contacts (only displays phone number)

We realized since bbOS 7.1 update the bb lost the possibility to show the contact from address book associated to the callerID
___country code is correctly set
___the menu voice
Options > Security > General Settings.==> Content Protection > Include Address Book = NO
is not present
___the menu voice
options >> security options >> encryption
is disabled
The previous tread was messed up with similar messages related to devices with the new BB Os v10.
But as far as this seeems to be a Os related issue, there is no sense in mixing

Not sure how the area code rules apply in your area. When you call from your cell to a contact that has their name, does it show you their name when calling out and the call log also has their name. Go into the phone application, swipe down from the top and cehck your smart dialing features for country code, area code and National number length.

Viewing call details for International calls

Similar Messages

Maybe you are looking for