Viewing call list during a call

Currently i'm using iphone4s with latest ios. It seems ios doesn't support viewing of the dial list during a call. More specifically, if you earlier dialed a number which is not saved in phone book, you can't see that number during next call. This seems bad. I had to tell the last dialed no to the person whom i was talking in the ne t call. I really had to disconnect, check/memorise the number and call again. I checked with latest windows, its missikg there as well. Any clue?

I just tested this out on my phone and your correct you can't view the call history while on a call.

Similar Messages

ACCESS CONTACT LIST DURING A CALL

HOW DO YOU ACCESS YOU CONTACT LIST DURING A CALL?

While on a call, just press the HOME button - this will keep your call active. Then press your CONTACTS. To get back to your DIAL PAD, just swipe down the top bar to get to the active call and select it.

View call list

How can I get a copy or view calls for previous months? I am only able to see Dec list. I need to get copy or view calls for Nov and previous months.

If this were possible, there would be a setting for this.
Not possible.

MSVS-2010 users: Can you *PLEASE* verify whether the "View Call Hierarchy" feature works for you?

I recently decided to educate myself in the intricacies of plugin development and have been experimenting with the set of Samples provided. Supposedly, Visual Studio 2010 (the official IDE for this development) has a very useful feature named "View Call Hierarchy", as described here:
http://dhondiyals.wordpress.com/2011/07/20/call-hierarchy-a-handy-feature-in-visual-studio -2010/
My problem is that that feature never works for me in C/C++ projects. Regardless of what function name I right-click, I always get this error message:
       "A function with the name 'xyz' could not be located"
Note: For C# projects, the feature works perfectly.
I have seen on the net some suggestions, from "remove the SDF (Intellisense) files" to "Reinstall Visual Studio".
I have 5 Visual Studio Pro installations in different computers and the feature does not work ever, in any one of them. I have tried with the Adobe source code, I have tried to create a basic MFC project and the feature does not work. I have tried C and C++ and it does not work. Well, you get the idea.
Can you folks share your experience with this issue?
TIA

Karl Heinz Kremer wrote:
Based on the Acrobat XI SDK documentation, MSVS 2010 is NOT supported for
plug-in development:
http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/Plugins_Cr eatingSimplePlug.34.2.html
Karl Heinz Kremer
From your link:
"The project files for the sample applications are created and supported only in the listed compiler versions."
The above is wrong. I have dowloaded the following:
- Acrobat SDK 9.1: Comes with Visual Studio 2008 project files.
- Acrobat SDK X:    Comes with Visual Studio 2009 project files.
- Acrobat SDK XI:   Comes with Visual Studio 2010 project files.

Is there a view called V$SQL_MEMORY_USAGE?

I am reading the Oracle 9i New Features (Database Administration part) from Oracle University technology-based training. It says there is a new view called V$SQL_MEMORY_USAGE. But I can't find it. When I tried to query as sys or system user, I got error: object does not exists. Any idea?
Thanks

Hi,
Thanks for the reply. The learning CD says: The V$SQL_MEMORY_USAGE view displays memory usage statistics. It even provides an example:
select
p.value, pga_aggregate_target, pge_inuse,
(pga_inuse - pge_auto) * 100 / pga_inuse percent_untuned,
pga_auto*100/pga_inuse percent_tuned, onepass_req
from (select
SUM(CASE WHEN name LIKE 'Total PGA inuse%'
THEN VALUE ELSE 0 END) pga_inuse,
SUM(CASE WHEN name LIKE 'Total PGA used for auto%'
THEN VALUE ELSE 0 END) pga_auto,
SUM(CASE WHEN name LIKE 'Maximum % one-pass'
THEN VALUE ELSE 0 END) onepass_req
FROM v$sql_memory_usage) mem_usage, v$parameter p
WHERE p.name = 'pga_aggregate_target';

How to view call details?

Hello. I have Verizon prepaid monthly plan. Went to website to try and view calls, but it just shows "inbound" and "outbound" with no info on inbound. I need something for court that shows calls that came into my phone last week. How do I do this?

Gettingold72,
Thank you for reaching out to us about your prepaid account. We encourage you to reach out to our prepay department at 888-294-6804. They will be able to further assist you in anyway you need.
RobinD_VZW
VZWSupport
Follow us on twitter @VZWSupport

View Call Manager Call Real-Time?

Cisco Forum Members:
Is there a way to view Call Manager calls real-time?
The application is that someone picks up an IP Phone, dials an access code to overhead paging, then fails to properly hang up the call as which point their subsequent conversation is broadcast over the paging speakers. Can it be determined which Directory Number is connected to the paging port (a router FXO/FXS port)?
Thank you.
Dan

The easiest way would be to look in the GW that houses the paging port with the show call active voice command. For more info look at this link, http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008019ab88.shtml
Please remember to rate all useful posts.
Sent from Cisco Technical Support iPhone App

View attachment list in ECC6

Hi,
I am trying to assign the GOS service for the Z transaction using a ehancment spot in PBO . Problem is I am getting the GOS service enabled for the transaction. But when I click on
"View Attachment list" service, it is given short dump in ECC6 where as in 4.6c not. IIt shows the followin dump.
SET HANDLER: Reference to handler object cannot be NULL.
The current ABAP program "CL_GOS_TOOLBOX_VIEW===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
When specification a handler for an event in the SET HANDLER statement,
the reference "IS_SERVICE-SERVICE" to the handler instance cannot be NULL.
Program CL_GOS_TOOLBOX_VIEW===========CP
Include CL_GOS_TOOLBOX_VIEW===========CM004
Row 69
Module type (METHOD)
Module Name DISPATCH_SERVICE
=============================================
I am using the following code.
data: lo_container type ref to cl_gui_custom_container,
ls_object type borident.
ls_object-objtype = 'ZRECON'.
ls_object-objkey = gs_rec_all_scr-reconobj.
case ok_code.
when 'ATTACH'.
call method go_myobject->start_service_direct
exporting
ip_service = 'CREATE_ATTA'
is_object = ls_object
io_container = lo_container.
when 'LIST'.
call method go_myobject->start_service_direct
exporting
ip_service = 'VIEW_ATTA'
is_object = ls_object
exceptions no_object = 1
object_invalid = 2
execution_failed = 3
others = 4.
endcase.
The short dump given at
call method go_myobject->start_service_direct
Thanks a lot for ur suggestions.
Zakir.

Solved Question

Problem with GOS view attachment list in SAP Upgrade

Hi,
The view attachment list is working fne in 4.6c for the Z transaction. When I run the same transaction in ECC6, I am getting the 'GOS View Attachment List' icon, but when I click on
this icon, it is given short dump in ECC6 where as in 4.6c it is working fine. It shows the followin dump in ECC6.
SET HANDLER: Reference to handler object cannot be NULL.
The current ABAP program "CL_GOS_TOOLBOX_VIEW===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
When specification a handler for an event in the SET HANDLER statement,
the reference "IS_SERVICE-SERVICE" to the handler instance cannot be NULL.
Program CL_GOS_TOOLBOX_VIEW===========CP
Include CL_GOS_TOOLBOX_VIEW===========CM004
Row 69
Module type (METHOD)
Module Name DISPATCH_SERVICE
=============================================
When I click on SET HANDLER statement, control leads to method DISPATCH_SERVICE in class CL_GOS_TOOLBOX_VIEW.
=============================================
I am using the following code.
data: lo_container type ref to cl_gui_custom_container,
ls_object type borident.
ls_object-objtype = 'ZRECON'.
ls_object-objkey = gs_rec_all_scr-reconobj.
case ok_code.
when 'ATTACH'.
call method go_myobject->start_service_direct
exporting
ip_service = 'CREATE_ATTA'
is_object = ls_object
io_container = lo_container.
when 'LIST'.
call method go_myobject->start_service_direct
exporting
ip_service = 'VIEW_ATTA'
is_object = ls_object
exceptions no_object = 1
object_invalid = 2
execution_failed = 3
others = 4.
endcase.
The short dump given at
call method go_myobject->start_service_direct
Thanks a lot.
Zakir.

Hi,
I am facing the same issue. Can somebody help me to fix this issue?
Thanks,
Geetha

How to create GOS view attachment list in ECC6

Hi,
I created Z transaction. I have to create View attachment List to this transaction. How to create GOS view attachment list in ECC6. can anybody send sample code on this.
Thanks in advance.
Zakir.

Hi all,
I've following problem with class CL_GOS_ATTACHMENTS.
Transaction IE01/02/03 (create/change/display equipment) starts and instantiate GOS manager, and related BAdI are called.
Then, when I choose one of available service, CL_GOS_ATTACHMENTS is instantiated, and inside that class a new GOS manager is instantiated, inspite of already existing instance.
As a result, related BAdI are called twice, but unfortunately second time some SY variables are not correctly filled, particularly SY-TCODE and SY-MODNO are both empty.
I've develop a workaround so that when sy-tcode is filled I save it somwhere, and when it's empty I filled it from saved value, does anyone know any other solution??
Many thanks
Regards
m@x

Problem in "View Attachment list"

I am trying to assign the GOS service for the Z transaction using a ehancment spot in PBO . Problem is I am getting the GOS service enabled for the transaction. But when I click on
"View Attachment list" service, it is given short dump in ECC6 where as in 4.6c not. IIt shows the followin dump.
SET HANDLER: Reference to handler object cannot be NULL.
The current ABAP program "CL_GOS_TOOLBOX_VIEW===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
When specification a handler for an event in the SET HANDLER statement,
the reference "IS_SERVICE-SERVICE" to the handler instance cannot be NULL.
Program CL_GOS_TOOLBOX_VIEW===========CP
Include CL_GOS_TOOLBOX_VIEW===========CM004
Row 69
Module type (METHOD)
Module Name DISPATCH_SERVICE
=============================================
I am using the following code.
data: lo_container type ref to cl_gui_custom_container,
ls_object type borident.
ls_object-objtype = 'ZRECON'.
ls_object-objkey = gs_rec_all_scr-reconobj.
case ok_code.
when 'ATTACH'.
call method go_myobject->start_service_direct
exporting
ip_service = 'CREATE_ATTA'
is_object = ls_object
io_container = lo_container.
when 'LIST'.
call method go_myobject->start_service_direct
exporting
ip_service = 'VIEW_ATTA'
is_object = ls_object
exceptions no_object = 1
object_invalid = 2
execution_failed = 3
others = 4.
endcase.
The short dump given at
call method go_myobject->start_service_direct
Thanks in advance.

Solved Question

How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization. We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
the calendars and contact lists from our mobile phones. How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us. After doing research, we found that Active Sync will only show the default folders of the account. To
solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder. The issue we came across with this method is that the Add-In we are using
is not capable of automatic synchronization. There is a button and it must be clicked after every update is made, which is not ideal for our solution. We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
offer which will automatically synchronize the folders. After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server? Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync? If so, are we in the right
direction with what we have found so far?
Thanks,
Brad

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

How can i view a list of all upcoming dates in my calendar?

i love my iphone 5 and use the calendar function allot to record upcoming meetings etc. Is there any way I can view a list of all of my events in my calendar? i dont have a pc or a mac and just use my iphone exclusively but the way the calendar is structured it seems to me quite limited in the way i can see whats coming up, can anyone help?

When observing the calendar in the date mode, you can tap on the 3 lines to the left of the search glass and that will put the device into the list mode. This will display the list that you can scroll through.

HT1390 how can i view a list of only the rentable movies in itunes?

how can i view a list of only the rentable movies in itunes?

you mean using itunes for windows or from the ipad

Why did my calendar view suddenly change? Using iOS 7.1 and I've been using this version for a few weeks with no problem with my calendar. Now the view has changed and I can't view a list mode without seeing the month too

Why did my calendar view suddenly change in iCal? I've been using ios7 fôr a few weeks now with no problems. Suddenly, without any updates or anything, the calendar view changed and I can no longer view it as a list without having the entire month seen as well.

Hey Gattypyle,
Thanks for the question. You simply need to go back to Day/Week view, then tap the list-view icon once more.
Calendar at a glance - iPhone
http://help.apple.com/iphone/7/#/iph3d110f84
View a list of events. In month view, tap to see a day’s events. In day view, Tap the to view a list of events.
Thanks,
Matt M.

Viewing call list during a call

Similar Messages

Maybe you are looking for