Viewing different attributes in a report

Hi,
I have created a cube using AWM, and in addition to the standard attributes short_description and long_description I've added a few attributes on my own.
When I create a report I can't choose which attributes to display, it seems like it always shows long_description. In some reports showing the long_description will be ok, but in other reports showing another attribute will make for sense for the persons viewing th report.
Is there a way to select what attribute to display?
regards
Ragnar

Hi,
I would to like to know which languages have been translated for some reports. So I don't need it inside the code, I would need a transaction, a function or a table in order to check it.
Many thanks

Similar Messages

  • HOWTO: Control Printer Attributes for a Report at Run Time Reports 6i

    HOWTO: Control Printer Attributes for a Report at Run Time
    Like page width , height etc
    my problem is i had installed a printer and it is set for
    printing different reports ( like invoice slips , legal size ,
    A3 etc ) each time i have to manually set the page settup from
    printer folder .instead if there is an option to set the printer
    attributes from Reports 6i it is great
    rajesh

    All the Printer Setup(Page Height and Page Width) must be set in
    the Reprot Program. These can be set at the Layout-Main Section
    in the Object Navigator.
    hth

  • SQL Report Viewer Web Part Not displaying Report

    I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file. 
    Any help is greatly appreciated!!
    All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
    the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report. 
    Now the SQL Report Viewer web part isn't showing anything (blank)

    Dear Form Moderator,
    This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
    https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
    Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
    https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
    [SharePoint Forum Moderator]
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Using attributes in the Report Designer

    Hi,
    Does anyone know if it's possible to display attributes of an InfoObject in the Report Designer? I made a query using several attributes of an InfoObject. This works great when I just run the query but as soon as I use the query as a datasource in the Report Designer the attributes are gone.
    Thanks in advance,
    Alex

    Hi
    you can view the attributes in RD.
    which version of RD u r in. previous revisions u r not able to see the Attributes in the RD update ur system to latest revision.
    In the Older versions u can select the attribute, After executing the Query, Click on Filter then select infoobject and Edit. In the Selector u can view ur attributes for the Selected Info object
    Regards
    Veda
    Message was edited by:
            vedaprasuna devallapalli

  • Option to select different financial periods in report:S_ALR_87100185

    Hi All,
    1) Is it possible to have option to select different financial periods, in report: S_ALR_87100185
    2) Excel download functionality in report : S_ALR_87100185
    Regards,
    Samir Bhadekar

    hi,
    1) all periods are already shown on standard report
    2) GO to report seting of 3CST1 & go to output type tab switch on available on  selection screen, then once you ren report select classic report option & system allow to save from classic view to rquired format
    hope this will help you..
    Reg,
    Sam L.
    Edited by: sam Lesha on Jan 12, 2011 9:15 AM

  • How to view pre-built Dashboards and Reports of Oracle BI- Apps?

    Hi All,
    We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
    But we are facing problem in viewing any prebuilt dashboard or report.
    Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
    As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
    Any help would be highly appreciable.
    Regards,
    Manmohan Sharma

    Hi Damon,
    Thanks a lot.
    Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
    Could you please provide the path to get Prebuilt Dashboard & reports ?
    Regards,
    Manmohan Sharma

  • Different attribute for UPN for specific SPN

    Hi,
    is it possible to use a different attribute in AD as the UPN for a specific SPN?
    For example, if I access http://webserver.company.com and it has spnego (kerberos auth) configured it can use the default UPN attribute but if I browse to http://myspecialweserver.company.com (which also has spnego enabled) I want a different attribute to be
    used for the UPN inside the kerberos ticket for example [email protected] The reason behind is that the webservers are not IIS servers so they have their own user store in which they look up the users to make sure they have a valid account.
    Many thanks,
    Edward

    Hi,
    Just want to confirm the current situations.
    Please feel free to let us know if you need further assistance.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Different display on client report builder and web reports

    Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
    My HPUX is 11x,and display the Chinese report .
    Any body know why ?give me some advice ,thank u very much.

    Hi
    If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
    Thanks
    Rohit

  • How to reference the Parent view Object attribute in Child View object

    Hi , I have the requirememt to generate Tree like struture to display Salary from joining date to retirement date in yearly form.I have writtent two Pl/SQL function to return parent node and child nodes(based on selected year).
    1.First function --> Input paramter (employee id, retirement date , joining date) --> return parent node row with start_date and end_date
    2. 2nd function --> input paarmter(employee id, startDate, end_date) --> return child node based on selected parent node i.e. start date and end date
    I have created two ADF view object based on two function return
    Parent Node --> select * from Table( EUPS.FN_GET_CONTR_SAL_BY_YR(employeeId,retirement Date, dateOf joining)) ;
    Child Node --> select * FROM TABLE( EUPS.FN_GET_CONTR_SAL_FOR_YEAR( employeId,startDate, endDate) ) based on selected parent node.
    I am giving binding variable as input for 2nd function (child node) . I don't know how to reference the binding variable value in child view from parent view.
    Like I have to refernce employeId,startDate, endDate values in 2nd function from parent view object. some thing like parentNode.selectedStart_date parentNode.employeeId.
    I know we can achive this writing the code in backing bean.But i want to know how can we refernce parent view object attribute values in child view object using Groovy or otherway?
    I will appreciate your help.
    Thanks

    I have two view com.ContractualSalaryByYearlyView for Parent Node and com.ContractualSalaryByYearlyView for child Node.
    I have created view link(ContractualSalYearlyByYearViewLink) betweem two view by giving common field empId, stDate , endDate.(below is the view link xml file).
    I tried give the binding attribute values using parent object reference like below in com.ContractualSalaryByYearlyView xml file but getting error
    Variable ContractualSalaryByYearlyView not recognized.I think i am using groovy expression.
    Thanks for quick response.
    com.ContractualSalaryByYearlyView xml
    <ViewObject
    <DesignTime>
    <Attr Name="_isExpertMode" Value="true"/>
    </DesignTime>
    <Variable
    Name="empId"
    Kind="where"
    Type="java.lang.Integer">
    <TransientExpression><![CDATA[adf.object.ContractualSalaryByYearlyView.EmpId]]></TransientExpression>
    </Variable>
    ContractualSalYearlyByYearViewLink.xml file
    <ViewLinkDefEnd
    Name="ContractualSalaryByYearlyView"
    Cardinality="1"
    Owner="com.ContractualSalaryByYearlyView"
    Source="true">
    <DesignTime>
    <Attr Name="_finderName" Value="ContractualSalaryByYearlyView"/>
    <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
    <Item
    Value="com.ContractualSalaryByYearlyView.EmpId"/>
    <Item
    Value="com.ContractualSalaryByYearlyView.StDate"/>
    <Item
    Value="com.ContractualSalaryByYearlyView.EndDate"/>
    </AttrArray>
    </ViewLinkDefEnd>
    <ViewLinkDefEnd
    Name="ContractualSalaryForYearView"
    Cardinality="-1"
    Owner="com.ContractualSalaryForYearView">
    <DesignTime>
    <Attr Name="_finderName" Value="ContractualSalaryForYearView"/>
    <Attr Name="_isUpdateable" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
    <Item
    Value="com.ContractualSalaryForYearView.EmpId"/>
    <Item
    Value="com.ContractualSalaryForYearView.StDate"/>
    <Item
    Value="com.ContractualSalaryForYearView.EndDate"/>
    </AttrArray>
    </ViewLinkDefEnd>

  • How to display the header data on different position in alv report

    hi all,
    how to display the header data on different position in alv report.
    for example ,
    customer                                                   name
      xxxx                                                         xxxx
                     vendor        name     street 
                      xxxx         xxxx      xxxxx
    pls   help me .

    hi
    as per my understanding you need to trnasfer header internal table data  to pdf..
    please check the following links for internal table to pdf..
    Convertion of Internal table data to PDF
    This link is related to ur issue
    Re: how to insert the calling of the FM: OTF to PDF
    Thanks

  • How do I use the same css style but different attributes, Without affecting another page.

    Hey everyone,
    I am using the "NivoSlider", for my dreamweaver page but I am not sure how to tell styles that one page has one attribute and the other one will have a different attribute.
    For example: in my "about us" I have a small slideshow with its own pictures. I then put  a gallery page with its own pictures, yet, I want to make that slideshow box larger without affecting the other small slideshow.
    I am using just one Style.CSS for the slideshow.
    Anyways, is their a way to tell tell the code that one page is going to be a different width then the other?
    Thank you!

    Embedded CSS rules take priority over styles in external style sheets.   So you can add page specific rules between your document's <head> tags and after all other links to external CSS files.
    <style>
         page specific rules here....
    </style>
    Nancy O.

  • Is there a way to view different portions of a document at the same time?

    Is there a way to view different portions of a document at the same time?

    No. I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

  • I want to set up two monitors but be able to view different programs on each one how do i do that

    i have two monitors hooked up to my desktop but want to view different programs on each one how do i do it

    Chipper, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Photo rotaion in organize view different than edit view & slideshow

    Photo rotaion in organize view different than edit view & slideshow. The fact that the power supply to the computer was accidentally disconnected while I was working in iPhoto no doubt was the cause of this phenom.
    Any suggestions as to how to re-sync the rotations back up?

    Thanks for the tip. I wasn't aware of the use of theses two keys simultaneously. It occured to me after this post to just trash the whole library which I had just created for this particular group of photos and re-import the photos to a newly re-created library. I still had the camara connected so as it turned out it was fairly easy. Now that I think about it, if this hadn't been a newly created library just for this group of photos it wouldn't have worked so simply, so I guess I discovered another benifit for having multiple libraries.
    I'm glad you recomended the apple/alt key combo though as this knowledge no-doubt will come in handy at some time.
    iMac PowerPC G4 800 mhz 1GBSDRAM 17" Flatpanel   Mac OS X (10.4.8)   Seagate external Firewire/USB HD's:250GB & 500GBSony DSC-V3 & DSC-S8 Cybershot

  • Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

    Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
    replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
    Rahul

    Hi.
    With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
    http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Maybe you are looking for