Viewing Emails via usb

Hello BB forums!
I have just found out that you cannot sych emails via USB for a Blackberry.
We have purchased a Blackberry Bold and I could of swore I remeber seeing this... however looks like im wrong
So I was just wondering if there are any add ons or mods that I can use?
I would just like to see emails from the phone.

Hi and Welcome to the Forums!!
Have you installed Desktop Manager to your computer?
What email system are you using? Outlook?
Here is some more info: http://www.ehow.com/how_4502616_sync-outlook-blackberry-via-usb.html
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Similar Messages

Syncing email via USB

Is there any way to sync email between Outlook and the iPhone via the USB connection - from what I've read on this forum is seems like it can't be done.
What is the reason for not allowing email to be sync'd via USB?

Firstly you should not have installed iSync 1.5 under Mac OS X 10.4.11.
iSync 2.4 is the version of iSync for Mac OS X 10.4.11 and is already installed. By installing an older version you may have broken syncing completely because doing so will have overwritten important system components with much older versions.
Hopefully, you made a full system backup before installing iSync 1.5 so that you can easily revert to it.
The reason why no existing iSync Plugins (which can only be used with iSync 2.4 and later) don't support USB syncing is because the phone itself doesn't support USB syncing on a Mac. You can only sync older Sony Ericsson phones via Bluetooth.
Even if the phone was USB compatible, if you can't navigate the menus then you couldn't have put the phone in the correct USB mode. Plus, you couldn't have transferred the contacts anyway, as contacts are not visible via USB on any Sony Ericsson phones.
So, unfortunately if you can't use the phone, there is no way to get your contacts off it, unless you happened to copy your contacts onto the SIM and can put the SIM in another fully working phone.

Blackberry id blocked,reset it but can't access reset email,how do I view email via laptop

i created my blackberry email account with my phone,now i cant view my blackberry id reset email,cant i view my emails via the web like web mail?any suggestions?

visit the link on your BlackBerry: https://blackberryid.blackberry.com/bbid/recoverpassword/
enter your BB ID and the code listed. Follow instructions to reset password. A link would be sent to your email address to change the password
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Can you synchronize outlook email via USB?

I have a palm centro and wondered if there is a way to synchronize my email via a usb connection. I have synchronized calendar, tasks, and memos. Is there software available to do this?
Post relates to: Centro (Verizon)

Do you have the Palm Desktop software installed which came with the Centro? The Versamail user guide describes the setup procedure in Chap. 9, with Start > Programs > Palm group, then selecting Versamail setup.
The Versamail application isn't labeled "Versamail" on the Centro. The icon is just named "Email". But it should also be mapped to the Mail hard button (bottom right). At least, it was on my AT&T Centro...maybe Verizon is different. If it's not, you should be able to change it
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I have lots of .MOV files on my iPhone5 that I need to transfer to my PC. Using QuickTime Player 7.7.4 I am unable to view them once they have been copied to a hard drive or directly from the iPhone via USB. 1% of the time a vid is viewable

I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB. 1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio. Yes its a Quick Time problem I know but where do I post this question in the community? Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.

Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.

Unreadable word 2007 files after emailing via Gmail or saving to USB drive

I am having trouble with word 2007 files that I am emailing via gmail and also my uni portal email site. They lose the docx extension and become unreadable. It also seems that word 2007 files saved onto my USB drive are not readable on other computers. I have been advised to change configuration on my Macbook to Always use the file extension but I cannot find where to set this. Can anyone advise me on how to do this?

Welcome to Apple Discussions!
If you can't open it from Word/Neo Office's Open File command from within the application, setting the Open With file extension won't help. What may be the problem is that Word itself may be saving certain meta data that can't be transfered via the FAT32 storage of the USB drive. Your best bet is to archive it with control-mouse click if on a Mac, or using WinZip on a PC before moving it from one machine to another to avoid loss of important meta data.
If using the Word or Neo Office's File menu -> Open file command can read the file in question, your Open With that is available on the Mac's control - left mouse click (or one mouse button) key combination, has an optional checkbox to Always Open With, when you select Open With -> Other... Upon selecting that, pick your application to open the said document.
Message was edited by: a brody

5510 - prints via USB and wirelessly but can't print emails from ePrint on iphone

Just installed new Photosmart 5510. Prints fine via USB (main computer) and wirelessly (laptop) but I can't print anything from ePrint app on iPhone. HP ePrint Home & Biz works from iPhone but it doesn't have email printing function!

Hi Andy760,
From your iPhone, printing email would be from Apple Airprint. With your email open, touch the action button and select Print. You might have to select the printer, but it should print fine at that point.
To send email to print by using ePrint, you would forward the email to the printer's ePrint email address. Have you registered the printer on www.eprintcenter.com?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

I plugged in a camcorder via usb, manycam can view it, how can I...

...use imovie to capture from it?
it only has the option of the isight

ultimatetrainer wrote:
...use imovie to capture from it?
it only has the option of the isight
You were wise to test your camcorder's connection with "manycam," but, of course, iMovie is different.
I am not certain I completely understand your question(s), but this iMovie Help info may give you the information you need to get sorted:
(1) Recording (capture) directly into iMovie is done as explained here:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
As explained in the first sentence, you need a Firewire rather than USB external camera to record directly into iMovie:
You can record video directly into iMovie using your computer’s built-in iSight camera or a FireWire-equipped camera or camcorder.
As you have found, your built-in iSight can capture directly into iMovie even though it it a USB device.
(2) Importing video into iMovie is explained here:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/11497.html
A compatible camcorder that connects via USB can capture video, but the actual capture for these camcorders is done in the device rather than directly into iMovie.
(3) If iMovie is not recognizing your camcorder, consider the troubleshooting help here:
http://support.apple.com/kb/TS1059
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Tethering via USB between the Z10 and a laptop or PC & and few Comments About the Playbook Tethering

Tethering via USB between the Z10 and a laptop or PC can be a bit tricky.
On the Z10 do the following:
On the Z10 go to the Settings.
Go to Network Connections.
Go to Internet Tethering.
Select USB.
Turn on Tethering.
On the computer run the Blackberry Link software for the Z10:
Once the software starts, connect the Z10 via the USB cable to the PC.
Open the browser.
You should now be able to cruise the net, and do emails.
With the Playbook, the Bluetooth tethering does not yet work. This may be an OS or communications issue.
The best way to tether the Playbook for full speed and functions is using the WiFi option. Simply turn on the WiFi hot spot option and follow the instructions. The Playbook WiFi must also be properly set up. The Z10 USB and Bluetooth tethering mode must be turned off when using the WiFi mode. You can leave the base Bluetooth active on the Z10. There is a lot of available information about using the WiFi hot spot from the Z10. The process is very similar to the past models of Blackberry phones.
If you use the Bridge mode to tether, the Playbook email client software does not work very well. The browser will work fairly well, but slower with the Bridge mode. With WiFi the Playbook can brows at very high speed. With Bluetooth it is restricted to about 1.5 to 2.5 mb/sec. Take care that the WiFi mode burns through battery time very fast on both the Playbook and the Z10. Using the Bridge mode uses less power consumption than WiFi.
To use the Bridge mode, make sure the Playbook and the Z10 are first Bluetooth mated. Also the Bridge mode has to be set up between the devices. You will have to first install the Bridge software in to the phone for this to work.
I did extensive testing between the Z10 and the Playbook. They function well together as far as Internet and email are concerned, in consideration of using either tether or Bridge, depending on what you want to do.
From what I understand the Bridge mode uses some compression. It will not be as fast as using WiFi or Bluetooth tethering. The data cost using the Bridge mode is probably a bit lower because of the compression.
As far as the Bridge phone options are concerned, these features are not yet available. From what I read in a number of articles there are going to soon be some updates coming out to fix this. The Bridge options are a big part of the tablet application with the Blackberry phone. This was the big original application point of this tablet, otherwise any generic tablet would do the job.
Jerry G.

From the look of this thread it appears that no one outside of Canada uses an OS 10 BB yet. 247 views and no comments or help ? I'm sure I'm not the only BB user that uses Tether. If BB doesn't care to help then this will just be another nail in the corporate coffin that has been projected.
Maybe we need different forums for US users as the Canadians don't seem to have the same issues or cares.
The whole idea of the app Tether is not to have to pay the outrageous tethering fees that US carriers charge and it has worked well for years. But it can't work and won't work in the future without help from BB and the BB community.

Can't print via USB using my Officejet 4635 from iMac running 10.6.8

I bought this HP Officejet 4635 all-in-one printer yesterday and can't get it to print via USB. I have an iMac running OS 10.6.8. So far I'veI tried all the suggestions I could find on these forums (ex: downloaded the latest driver, unplug/replug the power, unplug/replug the usb, delete and "ADD PRINTER" again, etc....) The computer does recognize the printer, but shows "Unable to send print data" after I click on print. I know that the printer works fine because I was capable to email the document directly to it's personal email address. Please help!
This question was solved.
View Solution.

Hello there! Welcome to the forums @DanLA
I saw your post about how you cannot use your Officejet 4635 with your iMac running 10.6.8. I understand you have tried troubleshooting already, so please ignore any steps you've tried already in the list of my own suggestions below. If you still cannot connect afterwards, consider giving us a call. I will leave contact info below.
Mac OS X: How to reset the printing system
Repair disk permissions
Restart your Mac
Reinstall the full driver: HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers
Try another USB cable
Check for a Firmware Update: Getting the Latest Firmware and Product Updates
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet 2540 - connect to pc via USB, can I print from android tablet as well?

Hi,
I've just bought a HP Deskjet 2540 all in one printer.
I have set it up via USB connection to my windows 7 pc, and it is printing fine.
I also have an android tablet. Can I also print from this whilst using the printer via USB on my pc.
Any help on if this is possible and what steps I need to do if it is would be appreciated (I have been reaeding the help section on the website but I am just getting more confused).
Lesley

Hi @Lesley54R,
You don’t need to have the printer listed with the two different connections unless you’ll be switching back and forth from being connected by USB cable and wireless. You can delete the one you don't think you'll be using.
To print the web page, please use the browser found within the app. I’ve included the ePrint Mobile App FAQs document for your reference.
In addition I’ve also included the ePrint Product Specifications document. This document has the list of supported email programs, file types and print limitations.
Hope this helps!
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When i plug in my iPhone via USB iTunes dose not reconize my iphone

i just got a new computer (with windows 8) and i downloaded the latest version of apple i have a iphone 5 with ios 7.0.4 when i plug in my phone via USB to my laptop an auto play pops up that gives me the options to: organize and edit my photos (adobe elements organizer 11.0), open device to view files (file explorer),import photos and videos and or take no action but itunes does not open and on my iphone when i unlock it (i dont have a password) it also has a popup that askes if i want to trust my computer "your settings and data will be accessible from this computer when connected."then says trust or dont trust and it does every time i plug my phone into my computer when i open itunes my iphone is not reconized itunes dose not even reconize that there is a devive plugged in for that matter. and i have looked at previous problems and they all say to press on the device button. but there is no button when i go into prefrences ctrl+ and press devices all that it says is device backups (witch is empty) then "prevent ipods,ipads and iphones from sycing automatially witch is not marked off then warn when _____ of the data on this computer will be changed i selected any theit says itunes is not paired with any remotes then reset sync history
my questions are how do i get itunes to reconize my device and the trust my compter thing to turn off how do i sync my device with my computer

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it! When I tried to reinstall it, the pc will not connect it. I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to no avail. I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb. At my wits end, please help me!!!!!
This question was solved.
View Solution.

Hello,
Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
Let me know the outcome.

Can't 'Scan to Email' on USB connected printer to AE (Bridge mode)

Can't 'Scan to Email' on USB connected printer to 2nd AE (in Bridge mode extending wireless network).
Prints fine though.
Printer is set to static IP adress (192.168.0.50).
Upstream Router is: 192.168.0.1 (this is connected to first AE).
When the printer was previously attached (by ethernet cable) to 1st AE, everything was working fine and I could login to printer Admin page via Safari by tying IP Address.

Only the print function is supported when a multi-function device is connected to the USB port on an AirPort router.
Advanced features like scan, copy, maintenance, etc are not supported at the USB port.

Viewing Emails via usb

Similar Messages

Maybe you are looking for