Viewing files wile recording
So.. I did a job that consisted on shooting a series of clips and reproducing them wile the recording process was still going. note that the reproduction of the file happened only after it's recording process was already finished. that means i recorded file 1. finished recording file 1 started recording file 2. while recording file 2 i was watching the file 1 thru network on another computer and so on... i did about 18 clips.
everything went smoothly till the day after. when i tried to open the files again and they won't open. my disk is ok. furthermore. the clips that eventually were not reproduced wile the recording process was going are intact.
i tried opening with all sorts of softwares.. . playes, editors, compositing, you name it
file extension mov.
codec dv
format pal
average clip size 10 min or 2.5 gb
op sistem leopard
this files kynda worth my head so please, please help me to to keep it on he top of my neck
Your workflow has not been tested and is not recommended because it involves reading from the hard drive while simultaneously writing to it. While there's nothing inherently wrong with that in most cases, when you're working in realtime and dealing with the data rates associated with digital video, the drive may not be able to keep up. The primary risk is that frames will be dropped from the clip that's being recorded. This is precisely why we have not enabled OnLocation to play one clip while recording another.
I'm a bit surprised that the problem you're encountering is with the file that was being copied, not the one that was being recorded. I can't even offer a hypothesis as to how that occurred. Is the problem with the original clip or the copy?
If it's essential that you copy one file while recording the next, I recommend working with two projects on separate hard drives. After recording a clip to Project A on Drive 1, switch to the Project B/Drive 2. Then you can safely copy the clip on Drive 1 to the network. If you later want to review clips from both project at the same time within OnLocation, you can import the clips from one project into the other by dragging and dropping them from Finder to the Shot List.
Similar Messages
-
hey again. I had a error : mysql_fetch_array() which i got it
solved, but when i open my view_files.php
Text
it doesn't show the file names.
This is my code, again: i dont know what could possibly be.
<?php # Script 12.9 - view_files.php
// This page displays the files uploaded to the server.
// Set the page title and include the HTML header.
$page_title = 'View Files';
include ('./includes/header.html');
require_once ('mysql_connect.php'); // Connect to the
database.
$first = TRUE; // Initialize the variable.
// Query the database.
$query = "SELECT upload_id, file_name, ROUND(file_size/1024)
AS fs, description, DATE_FORMAT(date_entered, '%M %e, %Y') AS d
FROM uploads ORDER BY date_entered DESC";
$result = mysql_query($query) or die(mysql_error());
// Display all the URLs.
while($row = mysql_fetch_array ($result, MYSQL_ASSOC)) {
// If this is the first record, create the table header.
if ($first) {
echo '<table border="0" width="100%" cellspacing="3"
cellpadding="3" align="center">
<tr>
<td align="left" width="20%"><font size="+1">File
Name</font></td>
<td align="left" width="40%"><font
size="+1">Description</font></td>
<td align="center" width="20%"><font
size="+1">File Size</font></td>
<td align="left" width="20%"><font
size="+1">Upload Date</font></td>
</tr>';
$first = FALSE; // One record has been returned.
} // End of $first IF.
// Display each record.
echo " <tr>
<td align=\"left\"><a
href=\"download_file.php?uid={$row['upload_id']}\">{$row['file_name']}</a></td>
<td align=\"left\">" .
stripslashes($row['description']) . "</td>
<td align\"center\">{$row['fs']}kb</td>
<td align=\"left\">{$row['d']}</td>
</tr>\n";
} // End of while loop.
// If no records were displayed...
if ($first) {
echo '<div align="center">There are currently no files
to be viewed.</div>';
} else {
echo '</table>'; // Close the table.
mysql_close(); // Close the database connection.
include ('./includes/footer.html');
?>
thanks so much for all the help supportHi Luis,
If I may chime in and make a quick suggestion, Luis., mind
you? Por favor?
I didn't realize the content of your site is aimed for
specific adult audience. Please try to keep that in mind, for those
who are not familiar with your site, as I discovered just now and
didn't know... so be sure to make a note of it, so participants
will know right away or it might offend some of them, or not. It
somewhat offends me, but no big deal.
It would be nice if there is a simple warning or such
acknowledgement specifically intends for adult audience or
something. you know better than me or others.
Thanks and have a good one, Luis. -
Problem viewing videos I recorded with the phone
When trying to view videos I recorded with the phone, It gives me a message saying it is impossible to view this multimedia file format!
It has been recorded with the phone and it can't watch it on the phone!? It doesn't recognize its own recording format
Help pleaseIf the format is in 3GP you can view it with a player called VLC (http://www.videolan.org/vlc/), or can try a video conversion program to convert it into a format your computer can read. Once such program can be found here http://www.avs4you.com/AVS-Video-Converter.aspx
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
Regards
Aditya BhargavaHi adityabhargava01-
My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
http://www.mozilla.org/en-US/firefox/new/
My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
[[Options window - Applications panel]]
I hope that helps! -
Is there any provision to view the selected record using SYS_REFCURSOR?
hi friends ,
I was using SQL Server . now i am shifting to Oracle . so we are changing the Stored Procedures in SQLServer to Oracle SP's. I have given the structure of procedure given below . If possible , i want to see the output of select statement in the TOAD editor . If any body knows please help me
CREATE OR REPLACE PROCEDURE PS_AON
P_STATUS OUT VARCHAR2,
P_CUR OUT SYS_REFCURSOR
AS
BEGIN
OPEN P_CUR FOR
select colum1,column2,column3 from Table 1;
EXCEPTION
WHEN OTHERS THEN
P_STATUS:=SQLERRM;
END;
This is one of the model of stored procedures i am using . And the editor i am using is TOAD 7.3.0 and oracle 9i. Is there any provision to view the selected records by running this procedure in TOAD editor
thanks & regards(assuming you have relatively recent version of TOAD).
Write a small block to call the procedure (or use Toad's 'execute procedure' option) as in the example below. Note the ':' in front of 'v_cur_out'. When you run the block, TOAD will prompt you for a value / datatype for 'v_cur_out'. Ignore the value, set the datatype to 'Cursor' and click OK. The resultset (if any) will be displayed in the Data Grid window below.
DECLARE
v_status VARCHAR2 (32767);
BEGIN
ps_aon (v_status, :v_cur_out);
DBMS_OUTPUT.PUT_LINE ('v_status => ' || v_status);
END;
/ -
How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End ClassHow can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class -
In Lion 10.7.5 when viewing files/folders in column view, if I select arrange by name it does not sort the names alphabetically. Is this a bug or is there a way to view files in alphabetical order in column view?
I've been using Column View for years and have it set to None:
It has always shown in alphabetical order automatically. -
HI,
I have been using the RT Write Text File found in the following link. This demonstrates how to read and write to a text file on the cRIO and what I want to do is verify that the file is being created and that the appropriate data is being stored. How would I go about viewing files on the cRIO? I've been looking into using the NI Web-Based Configuration and Monitoring but I'm having issues with this. If someone can give me a bit of assistance that would be great.
So far I've been through Max, clicked on the NI-RIO and added the developer computer into the Remote Device Access. Also from the project window, I have added the same IP address under the VI Server in the project window and clicked the enable remote panel server under the Web Server.
I also have a question regarding to what happens to the data in a sudden shut down?
Solved!
Go to Solution.
Attachments:
Read and Write Files to Crio.PNG 31 KBHi,
remember, you can browse to a file on your remote RT system by opening a Windows Explorer and typing in FTP://ipaddres
Does this work?
This is an example how to read and write to a text file:
Read and Write to Text File on Compact RIO or Single Board RIO
https://decibel.ni.com/content/docs/DOC-9605
Regards,
Michael -
What software do I need to view files or watch movies on my imac/time capsule, from my macbook (away from home)?
imac is running lion...macbook is couple years old.
thnxIt appears you have a iPad Mini and a MacBook. Assuming that, this
About renting movies from the iTunes Store - Apple Support
says
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
This is the Mac Mini desktop forum -
Hi
I Need VDS script in order to change domain client local administrator password in my domain ,and put this script in startup script via group policy, but for security purpose I want to randomize local administrator password and log new password
set for each computer on a text file, I want to over write the old password of eachcomputer in log file with new one in order to have the update log file ,my support team some times need administrator password for troubleshooting.
I need a script for generate randomize administrator password which make log file to recorded new administrator password with associated computer name on it and each time new administrator password set it over write the old record on
the log file and update the content of log file automatically.
RegardsHi
I need a script for generate randomize administrator password which record new password on a log file with associated computer name and each time new administrator password set for a computer it over write the old record
on the log file and update the content of log file automatically.
Regards -
Can I use Bridge to view files in Google Drive?
Is there any way to use Bridge to view files that are in a shared Google Drive folder?
Have you searched for it using the Spotlight? That's the loop icon on the right side of the upper menu bar.
-
I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?
You should be able to change the permissions on the files.. this is yet another bungle by Mavericks I suspect.
http://support.apple.com/kb/PH13799
Sometimes it is because you Migrated wrongly.
http://pondini.org/TM/E10.html
It is not up to Mavericks because sadly the guy who wrote all this great info died recently. -
Viewing file names in vlc in ipad
Hi .. I'm not sure if the topic made sense.. Here is what Im trying to do ..
Say if I'm copying bunch of episodes from a series or movies and copy to vlc via itunes, when i try to open vlc and pick any episode, it only shows me first few letters of the file. Its quite common that all the files starts with same name..(eg. Naruto_Episode or Friends_Season_ )
Is there any way to view file name and then select it accordingly ? OR is there any other software which is out there I can use for this purpose
I spent some amount of time in renaming every files before i copied them to iPad.I dont want to do that everytime ..
Any suggestions / Thoughts ?
Thanks in AdvanceCompletely agree!
What were the developers thinking when they hid info as basic as file name from users once imported. Even mom/pop videos like a hockey high lights vid might have 15-20 vid clips coming in at random times and different sources.
To make users suffer with this crippled GUI just has to be one of those decisions you cynically think were made for $$$$ reasons...
ie cripple a useful cheaper tool like iMovie so users with even modest projects has to buy/learn the more expensive tool.
Thanks apple! -
Dreamweaver CS3 Remote View file display
Specs:
Dreamweaver CS3 on Windows XP Pro SP2.
Upgraded from DreamWeaver MX
1680 x 1050 60Hz resolution on vertical display LCD panel
with the monitor turned/displayed verticle so I can view more of
our site tree.
Problem:
When viewing files in split panel display (Remote Site on the
left, Local Files on the right) my Remote Site display will
collapse upward...hiding files from view, but they are actually
still there: I can click Refresh and the tree expands again: After
several seconds or sometimes immediately portions of the
folders/files will collapse/hide again.
It will do this to files I have selected. It will hide files
I have checked out. The worst of it is that sometimes files will
hide or collapse within sub-folders..giving the appearance that
files are stored in incorrect folders.
Thank you for your timeCan you explain the symptoms in more detail? Mixing the use
of DW8 with
DWCS3 would not make remote files appear and disappear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"shimmerdark" <[email protected]> wrote in
message
news:fs91gm$dea$[email protected]..
> Having the same problem with our company website. It
seems that files
> randomly
> disappear and reappear when they feel like it. Not sure
if it is a FTP
> issue or
> something else. I am the only one in our organization
that is currently
> using
> dream weaver cs3. Everyone else is still use DW8.
> -
Does a table/view still return records if the underlying VPD policy fails ?
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?
Thanks,
AshiAshiKD wrote:
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?No, you get a standard error message if the VPD function is wrong and if you won't pass the conditions of the VPD, you get nothing. That's what in general happens and should happen as well.
>
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?This would be a wrong approach then. If you are truly setting a VPD, you have to make sure that the context is set and the condition variable are passed through it. This is normally done through a logon trigger so again, generically , its not possible that it would not be set. I didn't get at all what ever you said in the last line? What is "default priv for VPD" ?
HTH
Aman....
Maybe you are looking for
-
LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO
Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was
-
I'm trying to export an image sequence (tga) with alpha channel but when it finishes the result is an image without alhpa channel. I don't see the option Milions of colors+ nowhere. How can I export TGA with alpha channel?
-
Week 37 touch! Is it possible..
My iPod shipped yesterday and when I checked the invoice it says im getting a week 37, how is it possible that these are still being sent out by apple?! Is it possible that the touch i will receive is one that has been taken back to an apple store be
-
Stored Procedure/Variable issue
Hopefully this is the last issue to work through... but we need to access images stored on another server. We have a stored procedure called 'get_doc' that accesses the image file, and we've successfully tested it with a hardcoded value. A button cal
-
Does anyone know if there are any differences between the CF 8 Enterprise and Standard Media? I know in earlier versions it was the same installer, with the license number actually determining which got installed. I downloaded the installer, and 8 ap