Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

Similar Messages

"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Error - Table not found

Hi Guys,
Error - TABLLE NOT FOUND
We are working on discovery server which comes preconfigured from SAP.
I am able to work on the standard repositories like products available on this server for syndication and importing, but when I am trying to create the new repository I am getting the error TABLE NOT FOUND. Getting this error after entering the DBMS Server, Login Details and Repository Name and Port details.
Thanks,
MS

Hi colleagues
You should check follow:
- DBMS-user can connect to DBMS from your workstation(where you run SAP MDM Console)
- DBMS-user has premissions(grants) according to "installation guide".
- restart SAP MDM Server
- update DBMS Settings
- create new repository
Regards
Kanstantsin

Error Table not found ODBC -2004 [melding 131-183] when opening "Open documents"

Hello, we get an error on opening the screen "Open Documents" in SAP B1 9.00
It says : Error Table ................ not found ODBC -2004 [melding 131-183]
Everytime a different table gets mentioned: OAIB - OWHT - WLS1 - CSHS.
Last time when we created a new userprofile it was gone, but now after twoo weeks this error is back.
Does anyone know how we can create a solid solution ?
Thanks in advance - Jos Dielemans

Hi,
It is an application error. Please check SAP note:
2008925 - You cannot run the Open Item List report for Purchase Requests
Thanks & Regards,
Nagarajan

Table not found error while importing table defintion in PI 7.1?

Hi Guys,
I am trying to import the table structure from DB2 as an external defintion but i am getting the error table not found.
There are no connection issues with the DB2 and CC is good. Are there any additional settings i need to perform to import the table?
any help or suggestions would be really appreciated
Thanks,
Srini

Hi Srinivas,
I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
- Check that your Communication channel is activated and working fine.
- Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
Just check with all authorization.
I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
Thanks,
Bhupesh.

"Error: Document not found (WWC-46000)" with a form based on a table with blob item

Hi all,
I have to manage a table-based form. One of the fields of the table is BLOB and the corrisponding field of the form is HIDDEN.
When I push the INSERT button all works well but when I try to UPDATE I get "Error: Document not found. (WWC-46000)".
Have you some suggestions ?
Thanks,
Antonino
p.s. Oracle Portal 3.0.7.6.2 / NT
null

Sorry, I think I did not explain well my problem.
Imagine this simple table:
key number;
description varchar2(50);
image blob;
I need to make a form that contains the corresponding "key" field and the "description" field but not the "image" one. I don't want to allow the end user to upload images!
When I insert a row the form works well and in the "image" field of the table an empty blob or null (now I don't remember) is stored: that's ok.
Now imagine I want to change the value of the "description" field. I submit a query for the right key, I type a new value for the description and finally I push UPDATE button but....an error occours.
I think this error is related with the Blob item of the table but I'm not sure.
Thanks again,
Antonino
<BLOCKQUOTE>quote:<HR>Originally posted by Dmitry Nonkin([email protected]):
Antonino,
If I understood the problem correctly:
The form's item type for BLOB column used to upload content cannot be hidden, that's why we have a special item type FileUpload(binary).
Thanks,
Dmitry<HR></BLOCKQUOTE>
null

Error: Document not found. (WWC-46000) while updating a form whit blob items

Hi all,
I have to manage a table-based form. The table has a BLOB field that allows NULL.
The blob field of the form is hidden.
When I try to INSERT all works well but when I attempt to UPDATE I get "Error: Document not found. (WWC-46000)".
Have you some suggestions ?
Thanks,
Antonino
p.s. Oracle Portal 3.0.7.6.2 / NT

I have the same problem. I have one form to insert file (works fine), and another form to update that record, but not the file. The fields of the file (blob and mime type) are not on the form at all, and getting the message WWC-46000.

Error 404 -- NOT FOUND when running a form in form 11g

Hi All,
I got this problem when I run the forms using internet explorer.
I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one tell me where it went wrong.
Thanks

Let's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

Error target not found base-level failed to install the packages

Im trying to install arch on my Virtualbox VM and its just returning:
error target not found base-level failed to install the packages to new root
What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

Please read the following and follow the advice included:
https://bbs.archlinux.org/viewtopic.php?id=57855
With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command. If it was in your original command, that would explain your results.

Entry in outbound table not found, Error message no. EO400

I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shah

Hi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj

IDOC Error - Entry in outbound table not found - Status 37

Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
Michael

Hi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika

IDOC error : Entry in inbound table not found

Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
"Entry in inbound table not found..."
in diagnosis:
Noinbound partner profile could be found with the following key:
 /XXXHUB/LS/LS/FIDCC2//// ..
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..

Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks....

Status 29: Error in ALE service : Entry in outbound table not found

IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
Monika

Hi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM

ALE Error 29 - Entry in Outbound Table not found

Hi,
I am getting the following error in the IDOC processing.
IDoc: <IDOC Number> Status: Error in ALE service
Entry in outbound table not found
I have checked the partner profile. It is OK
I noticed that the IDoc record doesn't have the defined port. The value in the port section is empty.
The IDoc message type - CRMXIF_ORDER_SAVE_M
Basic Type: CRMXIF_ORDER_SAVE_M01
Any inputs will be appreciated.

Observations -
I checked the Status records for the IDOC and there are only 2 entries -
1. 01 IDoc Generated and
2. 29 Error in ALE Service - Entry in Outbound table not found

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Similar Messages

Maybe you are looking for