Viewing in split view

I am having trouble getting dreamweaver to work in split view. When I click on it nothing happens. Any suggestions?

Which version of DW and which operating system?
Are you opening a HTML file to use Split View?
There is no Split View (or Design View) with CSS and JS files since they're code only.

Similar Messages

Aperture stopped showing pictures in viewer and split view

Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.

I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718

Dreamweaver 8.0.2 -- code view is totally screwed, so is design view. Split view works fine.

I just started having an extremely annoying issue in DW8-XP.
The code view is completely messed up. I can switch to code view,
but nothing is there. Just a ghost of the split view I was just in.
If I open a new file (like css file) in code view, I see a ghost of
the last view. Since css files don't have a split or design view,
I'm screwed. Cannot firgure out how to delete the config file. Do
you think this would help? Would it erase any settings I have
currently set?
I tried switching to a default layout, restarting and all. No
luck. Little help? :D

Restart the system.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"purefusion" <[email protected]> wrote in
message
news:eqntd2$chq$[email protected]..
>I just started having an extremely annoying issue in
DW8-XP. The code view
>is
> completely messed up. I can switch to code view, but
nothing is there.
> Just a
> ghost of the split view I was just in. If I open a new
file (like css
> file) in
> code view, I see a ghost of the last view. Since css
files don't have a
> split
> or design view, I'm screwed. Cannot firgure out how to
delete the config
> file.
> Do you think this would help? Would it erase any
settings I have currently
> set?
>
> I tried switching to a default layout, restarting and
all. No luck. Little
> help? :D
>

DW CS5 crashes when switching to split view

I have just checked other comments in the forum but none seem to really fit the issue. The moment I use the code for a page and switch to split view, DW crashes. It works perfectly with smaller HTMLs (e.g. HTML emails) but starts playing up as soon as I try to work on the code for a page.
Any solutions.. ?
Thanks!

This is a long standing bug, that for some reason Adobe can't seem to fix. It started with CS4, and remains in CS5. Typically when looking at certain .aspx pages, when switching from design view to split view Dreamweaver will crash. Anyway, thanks to some investigation back in CS4, and a keen Dreamweaver user (jplaguna) we can all get back to working normally. I thought I would repost this for anyone struggling with the issue.
The problem is with Dreamweaver's "Translators" - whatever those are? Anyway, you simply rename that folder and your problems go away.
Sorry to hear that you've been having this problem. I'm glad that you found a way to work around the problem.
Translators are the code that recognizes certain pieces of server-side code so that you can select and manipulate them in DW. Turning them off disables features like Server Behaviors. Also, you can be more strategic by simply renaming the Translator for ASP.Net here:
c:\Program Files\Adobe\Adobe Dreamweaver CS4\configuration\Translators\ASP.Net.htm
Rename it to something like:
ASP.Net.disable_htm
Then you'll need to restart DW. This will disable the Translator for only ASP.Net, not all of the other Server Models.
Can you post a .zip file with a page that causes the crash? I didn't see one in the original forum thread.
Hope this helps,
Randy Edmunds
Dreamweaver Development
Adobe Systems, Inc.

Vews keps switching to Split View

I rarely use split view. Mostly just code view and
occasionally design view. However, quite often Dreamweaver will
just decide to switch over to split view with out me telling it to.
When it switches to split view the split is at the bottom, so I
can't see the design part. I don't want to ever be in split view
unless I tell it to. Is there any way around this? Has anyone else
had this issue? By the way I've had this same issue in MX, MX 2004,
and Version 8 so I don't think it's just my system. I'm currently
using version 8.

Fred,
> I rarely use split view. Mostly just code view and
occasionally design view.
> However, quite often Dreamweaver will just decide to
switch over to split view
> with out me telling it to.
There are certain operations that require Code View to
provide the
necessary feedback, so if you are in Design View, DW switches
to Split
View as a compromise of sorts.
The only way around that is to make note of what operations
cause DW to
switch from Design View to Split View, and always perform
them from Code
View.
HTH,
Randy

View keeps switching to split view

I rarely use split view. Mostly just code view and
occasionally design view. However, quite often Dreamweaver will
just decide to switch over to split view with out me telling it to.
When it switches to split view the split is at the bottom, so I
can't see the design part. I don't want to ever be in split view
unless I tell it to. Is there any way around this? Has anyone else
had this issue? By the way I've had this same issue in MX, MX 2004,
and Version 8 so I don't think it's just my system. I'm currently
using version 8.

Fred,
> I rarely use split view. Mostly just code view and
occasionally design view.
> However, quite often Dreamweaver will just decide to
switch over to split view
> with out me telling it to.
There are certain operations that require Code View to
provide the
necessary feedback, so if you are in Design View, DW switches
to Split
View as a compromise of sorts.
The only way around that is to make note of what operations
cause DW to
switch from Design View to Split View, and always perform
them from Code
View.
HTH,
Randy

What happened to Split View?

I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have.
One is "Split View" email:
This allows us to see the email message in the current window with the email list at the top, and the mail message at the bottom.
I also wanted to put out there that I can confirm there are 2 extra tabs at the top of iTunes that they previewed, the second to last on the right vaguely makes out "ringtones".
Regardless, at the bottom there is an additional green color category that you cannot make out the text to.
Back to the question... What happened to split view on email?!?!?

It's just annoying, he really spent some time on it.
Hopefully in an update.

How do I change Dreamweaver CC default view from split to code?!

In Dreamweaver CC, everytime I edit a .html file it defaults to the split view; I want it to open everything in code view! I have tried EDIT>PREFERENCES>FILE TYPES/EDITORS and added it to the open in code view option. But when I do this there is no option to switch between code-split-design when editing the file. I just want it to open everything into code view by default. I never had this problem with any other version of Dreamweaver and its driving me insane. I am only trying CC but this is a deal breaker for me, I would rather keep using CS6 if I cant get this changed. Please help! Thanks.

This is Adobe. They are too busy adding really obscure features to worry about your ability to control the work interface simply.
I too have this problem.
I think however, the best way would be for us to exchange lives as I have code view as the default and cant change that.
I think it would be simpler for us to exchange lives then it would be for adobe to fix the problem with their live cloud based software that you cant own and constantly reminds you of that fact by forcing you to register your product again and again.
No point in troubling their development staff who all seem to live in India even though I thought Adobe was a US company.
I hear they are busy with a module that allows people that use SASS and LESS at the same time as Fluid grids to make tea remotly thats dispensed via the USB 3.0 socket of any SkyLake equipped 14nm processor based laptop.
Im holding my breath.
Meanwhile, i'll send you a letter with my address so you can move to my address and take up my identity and me vice versa. I think the letter will be faster than using this forum as I see this responce has already taken Adobe 2 years to ignore it and not sort it out.

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

Why can't I type more than one space in a split-view in DW

Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

My small split-view file manager

Hello.
I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
You can get the browser from here http://github.com/napsy/gsfm
space - select/unselect
F5 - copy selection
F4 - rename selection
F3 - new directory
delete - delete selection
tab - change view
There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
Sere is a screenshot: http://napotnik.info/images/gsfm.png

It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

HT3805 In my split view, the viewed picture is all the way to the right- only a sliver is visible. How do I get it to be centered and viewed in total?

How can I get the picture in my split view to move back to the center where I can see it all?

Lynn,
there should be. Are you perhaps looking in the system library?
The User Library should appear in the Finder's "Go" drop down menu, like this:
If your system is Lion or Mt. Lion, you will have to hold down the option-key ⌥ to make it appear in the menu.
Then look in the folder Preferences for "com.aperture.plist" and remove it.
Don't forget to quit Aperture before you do this.
Regards
Léonie

How to view rating stars on pictures in browser or split view

On an Imac aperture v3.2 I cannot see the rating stars on the pictures in browser or split view. I can only see them if i open the metadata for each individual picture. Does anyone know how to turn this feature on? My husband has a Macbook pro using the same software and he can see them.

The ratings are part of the Metadata Overlays (link goes to User Manual page with full instructions). There are seven different Metadata Overlays. It is helpful to customize each of them. The customization is done via "View→Metadata Display→Customize".
The Browser Metadata Overlay is toggle on/off with "u". "{Shift}+u" will toggle the Browser Metadata Overlay between "Basic View" and "Expanded View".
What is most likely is simply that either your Browser Metadata display has been toggled off. Try each of the toggles above, and see if that doesn't bring back the ratings. If it doesn't, you'll have to add them back to the Metadata View using the customize command above.
Message was edited by: Kirby Krieger -- link added.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

Viewing in split view

Similar Messages

Maybe you are looking for