Viewing Installation Queue log after SAINT completes

Hello all,
Can anyone direct me as to how I might be able to view the installation queue log that was creating during the execution of SAINT? This is the log that provides information related to the various phases that are run during the execution. It appears as though once SAINT finishes, the ability to view the log becomes inactive from the menu. I would think that that log should be written out somewhere, but I am not certain. Any help is appreciated.
Thanks,
Doug

Hi Doug,
After a package is imported in SAINT, you can access the logs via menu Goto -> Import Logs.
Best Regards,
Matt

Similar Messages

Missing Event Viewer VM Manager Log after ugrade from SCVMM 2012 SP1 to R2

We recently upgraded from SCVMM 2012 SP1 to SCVMM 2012 R2. After the upgrade, I noticed that the VM Manager log, in the Event Viewer, is missing. I've tried to peruse all of the logs to see if it has been moved/renamed, with no luck. I highly doubt an important
log would be removed without a replacement being available, so I'm curious if it was something that had to be enabled (isn't turned on by default).
I had scripts which relied on the log for VM status changes, Event ID 821 (shut down/running/etc), to keep a last-used database for all of the VMs on our cloud.
Has anyone run in to this problem, or have any idea how I can get get the information that was available in the VM Manager log?
Thank you.

I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
is happening. All Agents are up to date.
I can migrate VMs in the cluster no problem.
I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
How can we fix this?

Need to e-mail job log after job completes (SM37)

Greetings!
I need to export the results of the Job Log (run SM37, double-click a finished job and then click "Job Log" button at top - this is the list I need). Obviously, the program has already terminated so it won't be able to initiate it. Is there another way?
The need is to have this log be e-mailed automatically after it's ran or, at the very least, have a second "step" (job?) that reads the previous one and e-mails it's log.
We'd like to keep it automated and not have someone in operations have to remember to do this.

Hi,
Debugging can be done as follows:
1. Put a breakpoint at the beginning report CRM_MKTTGGRP_EXPORT_BATCH
2. Select your previously executed job in transaction SM37
3. Type 'jdbg' into the tcode field in the upper left area
To analyze the results and messages of the campaign execution, you can also have a look into the application log, either in the campaign application or in transation SLG1. There you should find details why the BPs have not been contacted.
Hope this helps,
Frank

Viewing Old Transport logs after upgrade

Hi,
We are upgrading from 4.6B to 4.7. After upgrade we will be using 4.7
transport domain for transporting changes. But users should be able to
see old Transport logs of the 4.6B transports.How this can be
implemented?
Thanks,
Sam

Hi,
We are upgrading from 4.6B to 4.7. After upgrade we will be using 4.7
transport domain for transporting changes. But users should be able to
see old Transport logs of the 4.6B transports.How this can be
implemented?
Thanks,
Sam

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.

installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.

Hi,
I'm assuming you're machine is OS X (please include this in the future, avoids assumptions). Are you using anti-virus software, if so, if you stop/exit the anti-virus software, does the installation proceed?
If not, or if the installation still does not proceed after stopping the anti-virus software, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Macpage, in the 'Still having problems' section.
Maria

Need to autologin log in as user after MDT completes

Need to autologin log in as user after MDT completes. Can you assist with helping me achieve this? This is a must have as some software we use must be installed as the user after the machine has been imaged.
Thanks,
Michael

AutoLogon from Sysinternals is only telling half the story.
Although, technically yes, the value is "encrypted" in the registry.
It must be made clear that *any* administrator *can* extract the plaintext password saved using AutoLogon using a couple of LSA Win32 API calls: (see
http://securityxploded.com/defaultpassword.php)
Keith Garner - keithga.wordpress.com
Of course, any physical access to a machine is a risk. If you are not a admin on the machine you can simply create a bootdisk and grab what you need from there. I guess this is why it's important to encrypt your disks.

INstallation\Update Log?

New to Macs, so bear with me. Is there an installation\Update log some where on the Mac? I got a notice this morning about several updates (two applied to FCE HD, but others did not). But I'm not sure if I really updated or not as the only option after the update was process was to Quit the updater.
I should have made notes or printed the available updates but was in the middle of something else when I got the notification and just proceeded with the update process. By the time my conf call was done so were the update - or at least I think they completed.
Any way to see what was updated and when?
Thanks.

Hi,
Yes, there are logs for, effectively, everything. You can access the logs from within the Console utility which is located in your /Applications/Utilities folder.
With regards Software updates, you can also view which updates have been applied by firing up System Preferences, selecting Software Update and then clicking on the Installed Updates tab.
Kryten

Cannot View Database Home Page After Upgrading to XE 3.2 on Windows XP

Hi all,
I have recently upgraded from APEX 3.1 to APEX 3.2 on my Oracle 10g XE database running on Windows XP SP3.
Unfortunately after successfully completing the upgrade and starting the services when I try and visit the Start -> All Programs -> Oracle Database 10g Express Edition -> Go To Oracle Database Home Page I am receiving a page cannot be found error (or broken link message, depending on the browser I try IE7, Firefox 3.0.10 or Chrome 2.0).
The link I am being directed to is:
http://127.0.0.1:8080/apex (I have an entry in my Hosts file referring this to localhost).
How can I tell if Port 8080 is still open and accessible? I am using the embedded web pl/sql gateway and tried reconfiguring it again by running apxconf.sql as SYS:
SQL> @apxconf.sql
PORT
8080
Enter values below for the XDB HTTP listener port and the password for the Application Express ADMIN user.
Default values are in brackets [ ].
Press Enter to accept the default value.
Enter a password for the ADMIN user []
Enter a port for the XDB HTTP listener [ 8080] +<simply returned default>+
...changing HTTP Port
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Session altered.
...changing password for ADMIN
PL/SQL procedure successfully completed.
Commit complete.
-------- Confirming that the services have started ---------------
C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service was started successfully.
C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The OracleServiceXE service is starting......
The OracleServiceXE service was started successfully.
C:\oracle\oraclexe\app\oracle\product\10.2.0\server\BIN>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-JUN-2009 23:16:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 16-JUN-2009 23:16:27
Uptime 0 days 0 hr. 0 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oracle\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora
Listener Log File C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Listener Log File (C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log)
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-JUN-2009 23:16:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\listener.ora
Log messages written to C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oracle\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=600
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
16-JUN-2009 23:16:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Gary Williams))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
------------ Other tests -------------
SQL> SELECT STATUS FROM DBA_REGISTRY WHERE COMP_ID = 'APEX';
STATUS
VALID
C:\temp\apex>find /I "ora-" *.log
---------- INSTALL2009-06-16_13-02-41.LOG
---------- SQLNET.LOG
SQL> SELECT username
2 FROM dba_users
3 WHERE username LIKE 'FLOWS_%'
4 OR username LIKE 'APEX_%';
USERNAME
FLOWS_030100
APEX_PUBLIC_USER
APEX_030200
FLOWS_FILES
FLOWS_020100
I have turned off my Firewall, checked against multiple browsers.... HELP!!!!
I've backed out the 3.2 upgrade and reinstalled and receieved the same issue. The next step is to unistall the XE database and reinstall, but I'm loathed to do that without seeking some responses from this Forum.
Many thanks.
Have a great day.
Kind Regards,
Gary.

Hello Roel,
Thank you taking the time to reply.
I had previously tried all those url combinations and still no luck.
I also found out about displaying the HTTP port number. And you were right it was listening on the default 8080. I disabled it and re-enabled it on port 9080 to see if that made a difference but it didn't so I decided to remoce Oracle XE database and go through the reinstallation and subsequent upgarde to APEX 3.2. Everything appera sto be working fime now.
One point of note is that if I view the Listener status now I notice another line from what I had previously referring to the HTTP listener, although my listener.ora file never changed (apart from having the TNS Listener port resuming to the default 1521).
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-JUN-2009 11:24:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 18-JUN-2009 09:08:04
Uptime 0 days 2 hr. 16 min. 29 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oracle\oraxe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oracle\oraxe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=D9GVDX1S)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
Can anyone answer why this may have been omitted previously? Presumably this is why my browser couldn't render anything from APEX.
Kind Regards,
Gary.

Windows server 2012 R2 DC (Hyper-V Guest OS) DNS error event id 4013 in log after installing KB2975719 and/or KB2995388

Hi,
I just freshly installed a guest OS Windows 2012R2 on a Hyper-V 2012R2 server. Installed lots of updates and did many reboots, after that I installed the AD component. Couple of days later I'm having trouble with a RemoteDesktop server joining the domain.
After some research I see in the DNS log the following message:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Source: DNS
Catagory: None
Event ID: 4013
The description for Event ID ( 4013 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
This message is followed up with:
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The description for Event ID ( 4 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The description for Event ID ( 2 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer, or
contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
I did a restore from an earlier point, recreated the ActiveDirectory, but messages still coming in DNS log. I started from scratch with installing a new guest OS Windows 2012R2, directly after loging in first time, I installed AD component, and
give the server a reboot. and got the events below that looks normal:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4013
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
For more information, see Help and Support Center at
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The DNS server has started.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The DNS server has finished the background loading and signing of zones. All zones are now available for DNS updates and zone transfers, as allowed by their individual zone configuration.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
After that I create snapshots after installing every (10-15 updates), reboot, check dns log, and almost the last update, the KB2975719 and/or
KB2995388 is giving the weird messages in the DNS log.
http://www.microsoft.com/en-US/download/details.aspx?id=44051
Any idea?
Kind regards,
Steven

Hi Steven,
Would you please tell us that is the event 4013 logged continuously?
If this event is only logged after reboot or restart DNS service, then it is a normal behavior.
As we can see Event 4, which indicates that the DNS zones have been loaded successfully.
In addition, if Event IDs 4523 and 4524 are being logged after the Event 4013, then there is no problem with DNS service.
More information for you:
Event ID 4013 — DNS Server Active Directory Integration
http://technet.microsoft.com/en-us/library/cc735842(v=WS.10).aspx
Event ID 4 — DNS Server Service Status
http://technet.microsoft.com/en-us/library/dd349715(v=WS.10).aspx
Best Regards,
Amy

Error when starting the JC00 after the completion of the WEB AS 640 instal.

Hi,
After successful completion of the Web As 640 Installation on HP-UX, I am not able to start the JC00 and getting the following error.
sapweb:ep1adm 36> startsap
Checking db Database
ABAP Database is not available via R3trans
Checking db Database
J2EE Database is not available via test
See logfile JdbcCon.log
Starting SAP-Collector Daemon
12:19:32 09.08.2005   LOG: Effective User Id is root
This is Saposcol Version COLL 20.87 640 - hpxOscol 07/2003
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 1087) is already running .....
saposcol already running
Running /usr/sap/EP1/SYS/exe/run/startj2eedb
Trying to start EP1 database ...
Log file: /home/ep1adm/startdb.log
/usr/sap/EP1/SYS/exe/run/startj2eedb completed successfully
Starting SAP Instance SCS01
Startup-Log is written to /home/ep1adm/startsap_SCS01.log
Instance on host sapweb started
Starting SAP Instance JC00
Startup-Log is written to /home/ep1adm/startsap_JC00.log
Startup of Instance failed
See /home/ep1adm/startsap_JC00.log for details
startsap_JC00.log is
Trace of system startup/check of SAP System EP1 on Tue Aug 9 13:30:24 EDT 2005
Called command: /usr/sap/EP1/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2005/08/09 13:30:25
Startup Profile: "/usr/sap/EP1/SYS/profile/START_JC00_sapweb"
(4439) SETENV LD_LIBRARY_PATH=/usr/sap/EP1/JC00/j2ee/os_libs:
Setup Environment Variables
(4439) SETENV SHLIB_PATH=/usr/sap/EP1/JC00/j2ee/os_libs:/usr/sap/EP1/SYS/exe/run:/usr/sap/EP1/SYS/exe/runU:/usr/sap/EP1/JC00/j2ee/os_libs:/oracle/EP1/920_64/lib:/oracle/EP1/920_64/lib32:/oracle/EP1/920_64/lib:/oracle/EP1/920_64/lib32
(4439) SETENV LIBPATH=/usr/sap/EP1/JC00/j2ee/os_libs:
Execute Pre-Startup Commands
(4439) Local: rm -f jc.sapEP1_JC00
(4439) Local: ln -s -f /usr/sap/EP1/JC00/j2ee/os_libs/jcontrol jc.sapEP1_JC00
Starting Programs
(4446) Starting: local jc.sapEP1_JC00 pf=/usr/sap/EP1/SYS/profile/EP1_JC00_sapweb
(4439) Waiting for Child Processes to terminate.
(4439) **** 2005/08/09 13:30:31 Child 4446 terminated with Status 66 . ****
(4439) **** No more Child Processes to wait for.
(4439) Parent Shutdown at 2005/08/09 13:30:31
Execute Post-Shutdown Commands
(4439) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
I was able to start and stop the SAP before i took the backup but after the backup i am not able to start the SAP.
Thanks,
Sandeep

J2EE Database is not available via test
See logfile JdbcCon.log
Please see the log file.If it says password expired .Please change the password for the schema user of J2ee database.In my case the user is sapdbqx1 and after resetiing the apssword it worked fine.
Also onetime for annother system in XI Landscpe I had same issue.
Solution: The listener file should have both logical hostname as well as physical host name entry.Then its worked.
Sudhakar

Start one job after another complets using PL/SQL procedure and DBMS_JOB

All,
I am attempting to refresh a materialized view using DBMS_JOB and having a PL/SQL program loop through each materialized view name that resides in a table I created. We do the table because they have to be refreshed in a specific order and I utilize the ORDER_OF_REFRESH column to dictate which MV comes first, second, third, etc.
Now - I have this working to the extent that it kicks off 4 materialized views (currently set the procedure to only do 4 MVs for testing purposes) but I would ultimately like the procedure to create a new DBMS_JOB that calls DBMS_MVIEW.REFRESH of the next view in line ONLY after the preceeding materialized view DBMS_JOB completes.
The purpose of all of this is to do a few things. One - if I simply create a procedure with the DBMS_MVIEW.REFRESH call to each materialized view in order - that works but if one fails, the job starts over again and will up to 16 times - BIG PROBLEM. Secondly, we want the job that will call this procedure to fail if it encounters 2 failures on any one materialized view (because some MVs may be dependant upon that data and cannot use old stale data).
This may not be the "best" approach but I am trying to make the job self-sufficient in that it knows when to fail or not, and doesn't kick off the materialized views jobs all at once (remember - they need to start one after the other - in order).
As you can see near the bottom, my logic doesn't work quite right. It kicks off all four jobs at once with the date of the whatever LAST_REFRESH is in my cursor (which ultimately is from the prior day. What I would like to happen is this:
1.) 1st MV kicks off as DBMS_JOB and completes
2.) 2nd MV kicks off with a start time of 3 seconds after the completion of 1st MV (based off LAST_REFRESH) date.
3.) This conitnues until all MVs are refresh or until 2 failures are encountered, in which no more jobs are scheduled.
- Obviously I am having a little bit of trouble with #2 and #3 - any help is appreciated.
CREATE OR REPLACE PROCEDURE Next_Job_Refresh_Test2 IS
V_FAILURES NUMBER;
V_JOB_NO NUMBER;
V_START_DATE DATE := SYSDATE;
V_NEXT_DATE DATE;
V_NAME VARCHAR2(30);
V_DELIMITER VARCHAR2(1);
CURSOR MV_LIST IS SELECT DISTINCT A.ORDER_OF_REFRESH,
                              A.MV_OBJECT_NAME
                    FROM CATEBS.DISCO_MV_REFRESH_ORDER A
                    WHERE A.ORDER_OF_REFRESH < 5
               ORDER BY A.ORDER_OF_REFRESH ASC;
CURSOR MV_ORDER IS SELECT B.ORDER_OF_REFRESH,
                              B.MV_OBJECT_NAME,
                              A.LAST_REFRESH
                         FROM USER_SNAPSHOTS A,
                              DISCO_MV_REFRESH_ORDER B
                         WHERE A.NAME = B.MV_OBJECT_NAME
                    ORDER BY B.ORDER_OF_REFRESH ASC;
BEGIN
FOR I IN MV_LIST
LOOP
IF I.ORDER_OF_REFRESH = 1
THEN V_START_DATE := SYSDATE + (30/86400); -- Start job one minute after execution time
          ELSE V_START_DATE := V_NEXT_DATE;
END IF;
     V_FAILURES := 0;
     V_JOB_NO := 0;
     V_NAME := I.MV_OBJECT_NAME;
     V_DELIMITER := '''';
DBMS_JOB.SUBMIT(V_JOB_NO,'DBMS_MVIEW.REFRESH(' || V_DELIMITER || V_NAME || V_DELIMITER || ');',V_START_DATE,NULL);
          SELECT JOB, FAILURES INTO V_JOB_NO, V_FAILURES
          FROM USER_JOBS
          WHERE WHAT LIKE '%' || V_NAME || '%'
          AND SCHEMA_USER = 'CATEBS';
IF V_FAILURES = 3
THEN DBMS_JOB.BROKEN(V_JOB_NO,TRUE,NULL); EXIT;
END IF;
FOR O IN MV_ORDER
LOOP
IF I.ORDER_OF_REFRESH > 2
THEN V_NEXT_DATE:= (O.LAST_REFRESH + (3/86400)); -- Start next materialized view 3 seconds after completion of prior refresh
END IF;
END LOOP;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
     THEN
          IF MV_LIST%ISOPEN
               THEN CLOSE MV_LIST;
          END IF;
NULL;
END Next_Job_Refresh_Test2;
---------------------------------------------------------------------------------------------------------------------

Justin,
I think I am getting closer. I have a procedure shown just below this that updates my custom table with information from USER_SNAPSHOTS to reflect the time and status of the refresh completion:
CREATE OR REPLACE PROCEDURE Upd_Disco_Mv_Refresh_Order_Tbl IS
V_STATUS VARCHAR2(7);
V_LAST_REFRESH DATE;
V_MV_NAME VARCHAR2(30);
CURSOR MV_LIST IS SELECT DISTINCT NAME, LAST_REFRESH, STATUS
                         FROM USER_SNAPSHOTS
                    WHERE OWNER = 'CATEBS';
BEGIN
FOR I IN MV_LIST
LOOP
     V_STATUS := I.STATUS;
     V_LAST_REFRESH := I.LAST_REFRESH;
     V_MV_NAME := I.NAME;
UPDATE DISCO_MV_REFRESH_ORDER A SET A.LAST_REFRESH = V_LAST_REFRESH
WHERE A.MV_OBJECT_NAME = V_MV_NAME;
COMMIT;
UPDATE DISCO_MV_REFRESH_ORDER A SET A.REFRESH_STATUS = V_STATUS
WHERE A.MV_OBJECT_NAME = V_MV_NAME;
COMMIT;
END LOOP;
END Upd_Disco_Mv_Refresh_Order_Tbl;
Next, I have a "new" procedure that does the job creation and refresh show just below this which, when starting the loop, sets the LAST_REFRESH date in my table to NULL and the STATUS = 'INVALID'. Then if the order of refresh = 1 then it uses SYSDATE to submit the job and start right away, else if it's not the first job, it uses V_NEXT_DATE. Now, V_NEXT_DATE is equal to the LAST_REFRESH date from my table when the view has completed and the V_PREV_STATUS = 'VALID'. I think tack on 2 seconds to that to begin my next job.... See code below:
CREATE OR REPLACE PROCEDURE Disco_Mv_Refresh IS
V_FAILURES NUMBER;
V_JOB_NO NUMBER;
V_START_DATE DATE := SYSDATE;
V_NEXT_DATE DATE;
V_NAME VARCHAR2(30);
V_PREV_STATUS VARCHAR2(7);
CURSOR MV_LIST IS SELECT DISTINCT A.ORDER_OF_REFRESH,
                              A.MV_OBJECT_NAME,
                              A.LAST_REFRESH,
                              A.REFRESH_STATUS
                    FROM CATEBS.DISCO_MV_REFRESH_ORDER A
                    WHERE A.ORDER_OF_REFRESH <= 5
               ORDER BY A.ORDER_OF_REFRESH ASC;
BEGIN
FOR I IN MV_LIST
LOOP
V_NAME := I.MV_OBJECT_NAME;
V_FAILURES := 0;
UPDATE DISCO_MV_REFRESH_ORDER SET LAST_REFRESH = NULL WHERE MV_OBJECT_NAME = V_NAME;
UPDATE DISCO_MV_REFRESH_ORDER SET REFRESH_STATUS = 'INVALID' WHERE MV_OBJECT_NAME = V_NAME;
IF I.ORDER_OF_REFRESH = 1
THEN V_START_DATE := SYSDATE;
ELSE V_START_DATE := V_NEXT_DATE;
END IF;
DBMS_JOB.SUBMIT(V_JOB_NO,'DBMS_MVIEW.REFRESH(' || '''' || V_NAME || '''' || '); BEGIN UPD_DISCO_MV_REFRESH_ORDER_TBL; END;',V_START_DATE,NULL);
SELECT A.REFRESH_STATUS, A.LAST_REFRESH INTO V_PREV_STATUS, V_NEXT_DATE
FROM DISCO_MV_REFRESH_ORDER A
WHERE (I.ORDER_OF_REFRESH - 1) = A.ORDER_OF_REFRESH;
IF I.ORDER_OF_REFRESH > 1 AND V_PREV_STATUS = 'VALID'
THEN V_NEXT_DATE := V_NEXT_DATE + (2/86400);
ELSE V_NEXT_DATE := NULL;
END IF;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
     THEN
          IF MV_LIST%ISOPEN
               THEN CLOSE MV_LIST;
          END IF;
NULL;
END Disco_Mv_Refresh;
My problem is that it doesn't appear to be looping to the next job. It worked succesfully on the first job but not the subsequent jobs (or materialized views in this case).... Any ideas?

How do I retrieve my music library after a complete computer crash. I have a backup on a flash drive and I can access my Itunes account but my play lists and music are gone.

How do you retrieve downloaded music and playlists after a complete computer crash. I can log into my Itunes account and make purchases but my music library is gone. I have an external backup on a flash drive but for some reason the music does not show up there either. It's like I have a brand new account and have to start all over. Itunes must have an archive I can access to get my music back, right?
Maya

Playlists should be part of your backup copy.
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Print Service -- Queue Log location

Hi,
I'm sure this is just a minor thing I should know, but I'm trying to find the individual Queue logs. In reading the OS X Server -Print Server Admin document, it mentions:
A print queue log records information such as the name of users who submitted
jobs, the size of each job, and errors associated with a job.
It then tells me how to view a Print Service log which only contains info on the Print service itself, but not how to view the individual Queue logs. I've dug around for the past 2 hours but cannot locate it. I'd really like to have a log of that info-- any help would be much appreciated.

I appears the nature of this question has changed a bit. I can't the queue logs because it appears my jobs are not being processed by the server.
Here's the deal. I have a 10.6 lab set up pointing to an 10.6 server. All of the lab computers are set up to printing, using the printers provided by my MCX prefs. When you print a document from the workstation, it processes and prints as expected-- however at no point does the server have this job appear in the queue.
I just want to see if there is something I've missed. I set up the server with the printers I want in my queue. I then added said printers to the list via workgroup manager. The workstations see AND print to only the printers supplied in workgroup manager. But it appears that jobs do not actually go through the queue-- it's almost as though they bypass the server and print directly to the printer. Is there a step I left out?

Viewing Installation Queue log after SAINT completes

Similar Messages

Maybe you are looking for