Viewing MBR and Partitions

I just replaced the HD on my iMac running Max OS X version 10.5.2. Upon running Boot Camp Assistant I was faced with a confusing situation when asked which partition I wanted to install Windows XP on. I contacted Apple Support to try to "fix" this problem and was told I could download a tool to look at the MBR and reformat unnecessary partitions. I was referred to the following link: http://www.info.apple.com/kbnum/n306496. The series of articles boggled my mind and I could not find a way to view the MBR, let alone understand it. How can I view the MBR and delete unnecessary partitions? Details of what the Windows Installed showed follow.
I have a 250 GB HD. My options were:
476,946 MB on disk [MBR]
I: Partition1 [unkown] 476,946 MB {476,950 MB Free)
238,473 MB Disk0
J: Partition1 [unknown] 200 MB 200 MB free
K: Partition2 [unknown] 205,696 MB 205, 696 MB free
Unpartitioned Space 128 MB
C: Partition3 (Bootcamp) 32,451MB 32,434 MB free (this appears to be a previous version of boot camp that was restored when I used Time Machine to restore my HD.)
These partitions do not show up when using the Mac's Disk Utility.

Your new drive is not prepped correctly. Do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Similar Messages

Solaris Install overwrote MBR and first partition

I have an ABIT mobo with VIA chipset and a Sempron 2500 CPU, and WD 120 GB SATA drive. Not top of the line, but I'm on a budget. I have the SATA partitioned for multibooting, and I use XOSL multibooter. I have 3 OS's already, and several other partitions for backup. I was planning on installing Solaris on another extended partition. Kinda slow... kinda slow... hard to see the text on the monitor. Oh, the unofficial installation instructions says I should already have the partition set up, and recommends I use Ranish Partition Manager. Ranish is my favorite PM, so I quit the install, reboot to DOS, and set up a partition with Ranish. Hmmm. Solaris isn't a file type. What to do, what to do. Later in the installation instructions, it talks about the installer partioning the hard drive, so maybe I don't have to do it here. I'l leave this partition as FAT32, maybe Solaris will convert it, or I can use it for another backup, or data, or another OS. I exit and reboot to the install. Kinda slow, kind slow... now I don't see the dark text at all. Hmmm, reboot, restart. I get past the first few screens, but then it's just blank. I kick out the disk and reboot to .... nothing. now it won't boot to the hard drive. I reboot from floppy, the hard drive isn't there. Hmmm. Back to Ranish. The first partition (FreeDOS) has no data files in it, and is the wrong size, extending into the second partition space. The second partition isn't there, and there is unused space between the first and third partitions. Exit Ranish and go into PTS Disk Editor. Luckily I wrote down the hex code for the partition table, so I fix it back the way it should be. What was Solaris doing overwriting my MBR and partition table? I hadn't gotten to that point in the install yet to set up a new partition. Reboot, still nothing. Restore the MBR (I saved that too, plus the 62 sectors following). Reboot. Still nothing. Oh yeah, my FAT from partition 1 is gone, and who knows what else. What was Solaris doing overwriting that partition? Back to Ranish. Set partition 2 (Windows 2000) as my boot partition. Reboot. Phew! At least that comes up. I'm not too happy with Solaris trashing my MBR, partition table, and first partition. Yeah, yeah yeah, it won't be too hard to restore it. I'll assume my Linux is still working, although I haven't tried it yet. I think I'll wait to install Solaris until after I have a new, clean disk, and I'll be sure to disconnect this one until after the install is complete. Sorry Sun, your once-solid reputation has bounced down a few steps on this one.

this post on ranish.com does confirm that solaris overwrites the MBR. Please let me know what u did to overcome the problem because i want to install Solaris on a hard drive partition with XP on the other partition. Thanks,
Utpal
Can I boot Solaris 9?
=====================
Yes. You can. But you need to keep the following in mind:
1. Don't use the 'Installation CD'. It is not required. You might have problems if you
use this CD. Start with Software CD1.
2.If your software installation/booting fails with ACPI error, follow the instructions at:
http://access1.sun.com/FAQSets/Solarisx86FAQs.html (Q12)
(I did not get this error)
3. After installing CD1, you need to boot from the harddisk (solaris 9 would have overwritten
your MBR � Don't worry about this now; just proceed with the installation). Once it is booted
off the disk, after going thru few initializations again, it will prompt you to insert the second CD.
Insert CD2 and complete the installation.
4. Now, you can restore the RPM MBR.

Materialized view and Partition

Hi,
I want to discuss a scenario, with which i am dealing nowadays. there is only a single table (named livecdr ) has 22-23 fields and the records are updating in every sec (on daily basis) and in 24hrs livecdr contains approximately more than 2 crore records.
Problem is that the query processing time is so slow due to large number of records and query is fetching records from a view created on livecdr table. I want to know the options, how the query would fetch these records in a short time. Firstly i did range partitioning on livecdr and then i created materlized view but the view didn't create on partition table and when i removed partitioning it was created. After view creation, query performance is much better. i also applied indexing on livecdr.
Can you please tell me, whether this approach is okay or i am doing mistake. should i create partitioning on materialized view and how would i select records from view if partitioning would be applied on materialized view. Please guide me with best approaches.
thankyou.

Hello,
Here is how I created partitioned table (monthly partitions) and partitioned mview on the table. This is just an example you might have to change the mview partitions from monhtly to yearly or quartely.
CREATE TABLE live_cdr
   CALLID              VARCHAR2 (20),
   CD                  VARCHAR2 (25),
   CG                  VARCHAR2 (25),
   RE                  VARCHAR2 (25),
   OPC                 VARCHAR2 (12),
   DPC                 VARCHAR2 (12),
   STIME               VARCHAR2 (25),
   SDATE               DATE,
   ATIME               VARCHAR2 (25),
   ADATE               DATE,
   ETIME               VARCHAR2 (25),
   EDATE               DATE,
   schangeTime         VARCHAR2 (25),
   schangeDate         DATE,
   STATUS              VARCHAR2 (25),
   bucket              NUMBER (20),
   CIC                 NUMBER (20),
   charge              VARCHAR2 (30),
   ported              VARCHAR2 (30),
   jurisdiction_Info   VARCHAR2 (30),
   origLine_Info       CHAR (1),
   Variant             NUMBER,
   auto_inc            NUMBER
PARTITION BY RANGE (EDATE)
PARTITION LIVE_CDR_JAN_2009 VALUES LESS THAN (TO_DATE(' 2009-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS,
PARTITION LIVE_CDR_FEB_2009 VALUES LESS THAN (TO_DATE(' 2009-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
);Mview definition
CREATE MATERIALIZED VIEW KLONDIKE.LIVE_CDR_MV
LOGGING
PARTITION BY RANGE (EDATE)
PARTITION LIVE_CDR_MV_JAN_2009 VALUES LESS THAN (TO_DATE('20090201',
      'YYYYMMDD'))
    LOGGING
    NOCOMPRESS,
PARTITION LIVE_CDR_MV_FEB_2009 VALUES LESS THAN (TO_DATE('20090301',
      'YYYYMMDD'))
    LOGGING
    NOCOMPRESS
BUILD IMMEDIATE
REFRESH COMPLETE
START WITH SYSDATE
NEXT SYSDATE + 2 /24
AS
SELECT   DISTINCT (ic.callid) callid,
                  ic.CG,
                  ic.CD,
                  ic.RE,
                  ic.OPC,
                  ic.DPC,
                  ic.SDATE,
                  ic.STIME,
                  ac.ADATE,
                  ac.ATIME,
                  ec.ETIME,
                  ec.EDATE,
                  ec.STATUS
FROM   live_cdr ic, live_cdr ac, live_cdr ec
WHERE       ic.callid = ac.callid
         AND ic.callid = ec.callid
         AND ic.stime = ac.stime
         AND ic.stime = ec.stime
         AND ic.sdate = ac.sdate
         AND ic.sdate = ec.sdate
         AND ac.ADATE IS NOT NULL
         AND ec.EDATe IS NOT NULL
         AND ec.etime IS NOT NULL
         AND ic.CD IS NOT NULL
         AND ic.cg IS NOT NULL;Regards

Call search space and partitions - is there a easy way to view

Hi All
I would like to know how my css and partitions all hang together on my call manager, is there a easy way of seeing this, like a visual or table view etc ?
cheers

Hi Carl,
You can try the following. Using Bulk Administration, Export CSS data, you will get a tar file. Save that tar file in csv format. It will show the CSS names along with the list of partitions assigned to each CSS ( example output from my lab )
css.csv 60 0 0 456 12345724671 11445 0ustarccmservice 0 0 NAME
DESCRIPTION
TYPE OF PARTITION USAGE
ROUTE PARTITION 1
ROUTE PARTITION 2
ROUTE PARTITION 3
Hunt CSS
General
Hunt-Partition
ICT-CSS
General
CSS-Phone
Hunt-Partition
PT-Phone
CSS-Phone
General
SIP-URI-PT
PT-Phone
HP-PT
Forward-CSS
General
HP-PT
HTH
Manish

MDT Config UEFI Specific disk and partition?

Installing Win8.1 with MDT2013 on UEFI enabled machines everything seems to be ok.. Until... Injecting drivers. The deployment cannot proceed because of destination disk. Sounds obvious because Uefi makes multiple partitions unlike non-uefi that can be installed
on the first partition.
I've created an extra step to the "Format and partition disk" and named it "Format and Partition Disk - UEFI". In this step I've set an option "Task sequence variable IsUEFI equals True". So when it is "True" the step
will format the drive in GPT (as is required for UEFI boot). This seems to work good. I see in the installation the step "Format and Partition Disk - UEFI" when it's a uefi machine, and the original step if it is a non uefi machine. Obviously the
original step will have also an option "Task sequence variable IsUEFI equals False".
The problem comes when we get to the step "Install Operating System". Here I made the same change like I did above. (added extra step with extra option:
The original step "Install Operating System" will have install location: "Specific disk and partition"
Disk 0 Partition 1.
The added step will have install location "Specific disk and partition"
Disk 0 Partition 3. (Because UEFI has multiple partitions)
For some reason the deployment will accept the step "Format and Partition Disk - UEFI" but in the install step it will take the "Install Operating System - Legacy" (so it will try to install to disk 0 partition 1 as I see in BCD log).
Is there any reason that the same condition works at the format step and not at the install step?
We choose the option install to "Specific disk and partition" because of problem when have the location set at "logical drive letter stored in a variable" (problem described:
link)

Solution in my case was going for the "logical drive letter stored in a variable" instead of "Specific disk and partition".
Note when applying this: must keep using "OSDisk" variable or it will throw errors (problem described in
this link)
So I deleted the "UEFI" steps, and renamed the "Install Operating System - Legacy" to before. Removed the query for the IsUEFI variable. MDT will automatic install to MBR or GPT based on device.

Dual boot, UEFI and partitioning

Got a new computer which I put my old disks in. After a while I got them to
boot properly but I'm going to take the time to go from my current MBR setup to
GPT.
The idea
I have three disks, 480GB SSD, 640GB HDD and 2TB HDD. The idea is to use the
SSD for root and /home and then let the data on the 2TB be as it is (for now).
I will go all LVM on the SSD and 640 HDD (except for a part which will be for
windows 8). When I invest in a new disk (2TB) I will make the current 2TB LVM
as well as that new one so that moving "partitions" (LVM volumes) easier
if/when needed.
Questions
Will I still be needing something like syslinux/grub with UEFI? For the windows
part, will that require some sort of EFI partition and should I create that or
just leave 200GB + 500MB space at the beginning of the 640GB disk (and LVM on
200.5GB-END)?
If a bootloader is needed, can I put that on my SSD and still boot windows from
the HDD in an easy fashion?
Will there be any problems with having one disk still as MBR (I don't have the
space needed for backing up those 2TB currently)?

xintron wrote:Will I still be needing something like syslinux/grub with UEFI?
Booting an OS always requires a boot loader. The details of what boot loaders are available varies from one platform and OS to another, but a boot loader is a necessity. My Web page, Managing EFI Boot Loaders for Linux, describes the options for booting Linux on an EFI-based computer. SYSLINUX and GRUB are both options, but there are others, too. My personal preference is to use the EFI stub loader with rEFInd, but as I'm rEFInd's maintainer, I'm not exactly unbiased.
For the windows part, will that require some sort of EFI partition and should I create that or just leave 200GB + 500MB space at the beginning of the 640GB disk (and LVM on 200.5GB-END)?
EFI systems require an EFI System Partition (ESP) to boot any OS. (An exception is EFI-based Macs, but they're just weird all around.) I recommend a size of 550MiB for the ESP. Many Arch Linux users like to mount the ESP at /boot, since that simplifies kernel management with certain boot configurations.
If a bootloader is needed, can I put that on my SSD and still boot windows from the HDD in an easy fashion?
Yes, at least in some sense. Boot loaders normally reside on the ESP, which is normally shared between OSes, although there are exceptions to both of these rules. The Windows C: partition is separate from the ESP. In theory, the two can reside on different disks, although in practice I'm not sure how the Windows installers and other tools would cope with that type of configuration. In theory, you can also have multiple ESPs (on the same or on different disks), although the Windows installer flakes out when there are multiple ESPs on a single disk. I'm not sure how the Windows installer copes with a system with multiple ESPs, each on its own disk.
Note that putting the boot loader on the SSD is something of a waste, since the boot loader is normally accessed only during the boot process, so there's relatively little speed gain from putting it on an SSD vs. on a regular hard disk.
Will there be any problems with having one disk still as MBR (I don't have the space needed for backing up those 2TB currently)?
You can mix MBR and GPT; however, on an EFI-based computer, Windows must boot from a GPT disk. (In a conventional setup, this means that C: must be a partition on a GPT disk.) Some EFIs also require that the ESP be on a GPT disk, although I'm not sure how common this requirement is.
It's possible to convert MBR to GPT without data loss by using gdisk, so you can easily convert your 2TB disk to GPT without doing a backup. This operation is actually safer than it might seem, since the MBR and GPT data structures are quite simple, so there's little that can go wrong compared to, say, resizing a partition. That said, there's still some risk, so if you're not booting Windows from the disk, you might want to just leave it as MBR. Also, some MBR-to-GPT conversions will require shrinking a partition, so you'd need to do that in GParted or some other tool before doing the conversion. Of course, you should always keep backups of important data.

Does Boot Camp use Hybrid MBR, and if so is there a way to avoid it?

The title pretty much says it all, folks. I don't know how to tell if it does or not, except that certain Windows applications will not perform everything they should because they say I'm running on a dynamic disk.
So... when I use the automated utility to set up boot camp, does it partition my drive to be a hybrid MBR, and if so is there another way to do it? I am one of those people who will avoid hybrid MBR like the plague, and I know that Windows 7 will boot from a GPT disk. I also know that the bootcamp assistant isn't necessarily needed for dual booting (it's just nice and easy!).
Thoughts?

EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 is a Windows or Linux data partition.
48465300-0000-11AA-AA11-00306543ECAC is an HFS+ partition.
C12A7328-F81F-11D2-BA4B-00A0C93EC93B is the EFI boot partition.
My first thought was also that it must've been Windows' fault, but could anything from a different system really cause OSX to corrupt itself almost EVERY time it boots (as in... without even touching the Win7 partition)?
Software-partitioned disks depend entirely on correct implementations and the full cooperation among the operating systems. Any corruption-level mistake in any operating system, in a privileged application within any of the operating systems, or within the EFI console, can mean the disk is toast.
To get the whole disk erased, you have to select and erase the whole disk, and not any of the partitions. This isn't necessarily obvious in Disk Utility, particularly given that tool doesn't show "hidden" partitions. (You can't see the EFI partition, for instance.)
There are all sorts of odd games software can play with disks, including (depending on the particular disks) hiding ranges of sectors, or "repurposing" gaps among the partitions, or "repurposing" otherwise unspecified parts within the MBR.
That Tuxera NTFS is certainly a reasonable potential suspect. That's a privileged application that's writing directly into the disk structures, and those can corrupt the context of another operating system sharing the disk. (Microsoft Windows had one of these with their "harmless signature" offer for some years; a sequence that effectively corrupted other operating systems on other disks in the server.) In this case, the particular NTFS tool deliberately accesses other partitions, so that intentionally breaks through to the other partitions, which makes it a candidate for corruptions.
Ensure you're on a current version of that tool, as a start, and see if the vendor has any reports of issues.

How to select data from AZure table storage without row key and partition key

Hi
I need to select a data from azure table storage without rowkey and partition key. how in azure storage emulator click query it display all data from that table.
thanks
rajesh

Hi rajesh,
It seems that you didn't click query data using storage emulator. But I recommend you could use the azure server explore in your VS to view your data and query data. Please see this document (http://msdn.microsoft.com/en-us/library/azure/ff683677.aspx).
And base on my experience, you may need input the command on Azure storage emulator, such as this page(http://msdn.microsoft.com/en-us/library/azure/gg433005.aspx).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Missmatch between mbr and gpt

Hello,
I just finished downloading the updates yosemite in the app store.
when I tried to start the installation, the installation was issued a message like this
"Can't Install OS X on your Computer
a missmatch between the mbr and gpt partition maps is not supported with this operation.
Quit the installer to restart your computer and try again"
what should i do? i have 2 boot .
1 boot mac , and 1 bootcamp windows 7
sorry I am still learning in installing yosemite
My macbook pro version is
Macbook Pro 13" , Mid 2010 .
Thanks before,
Masrai

What is the version of OS on your Mac that you are currently using?
Open Disk Utility app, and from the sidebar on the left hand side select your physical drive (usually top entry on the sidebar). Then look at the bottom of this window and look for option called Partition Map Scheme. What does it say on your Mac?

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation

As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc，and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc，and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
Thanks

You are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Can't view Impact and Lineage tab in Meta data report

Post Author: mohideen_km
CA Forum: Data Integration
Hi guys,
I have a problem in meta Data Report ..
IN Impact and Lineage Analysis
I can View only OVerview Tab.I can not view Impact and Lineage
Help me to figure out..
Mohideen

Hi,
Select text column (varchar column) -> Treat Text as -> custom text format ->Remove @ (default) -> add [html]<script>sometext(‘@’)</script> followed by your javascript
for eg:
[html]<script>buildGoogleChart(‘@’)</script> <head> <script type="text/javascript"> function show_alert() { alert("Hello! I am an alert box!"); } </script> </head> <body> <input type="button" onclick="show_alert()" value="Show alert box" /> </body> </html>
hope helps u.........
cheers,
Aravind

Downloads from itunesU where viewed, played and saved?

downloads from itunesU where viewed , played and saved?

lse123 wrote:
downloads from itunesU where viewed , played and saved?
Look to see where they are stored in iTunes. Most are downloaded and stored in iTunes U under library. Those should be shown in iTunes U which is a part of the iPod app on the iPad. I have had a couple that had bad data in the metadata and were classified as Movies and placed in Movies. I selected those and right clicked (control click if no mouse with right click) on those, selected Get Info, selected Options, and changed Media Kind to itunes U. They were moved to the iTunes U section by iTunes.

How to create dynamic View Object and Dynamic Table

Dear ll
I want to create a dynamic view object and display the output in a dynamic table on the page.
I am using Jdeveloper 12c "Studio Edition Version 12.1.2.0.0"
This what I did:
1- I created a read only view object with this query "Select sysdate from dual"
2- I added this View object to the application module
3- I created a new method that change the query of this View object at runtime
    public void changeVoQuery(String dbViewName) {
        String sqlstm = "Select * From " + dbViewName;
        ViewObject dynamicVo = this.findViewObject("DynamicVo");
        if (dynamicVo != null) {
            dynamicVo.remove();
        dynamicVo = this.createViewObjectFromQueryStmt("DynamicVo", sqlstm);
        dynamicVo.executeQuery();
4- I run the application module for testing the method and I passed "Scott.Emp" as a parameter and the result was Success
5- Now I want to show the result of the view on the page, so I draged and dropped the method from the data control as a parameter form
6- I dragged and dropped the view Object "DynamicVo" as a table and I choose "generate Column Dynamically at runtime". This is the page source
<af:panelHeader text="#{viewcontrollerBundle.SELECT_DOCUMTN_TYPE}" id="ph1">
        <af:panelFormLayout id="pfl1">
            <af:inputText value="#{bindings.dbViewName.inputValue}" label="#{bindings.dbViewName.hints.label}"
                          required="#{bindings.dbViewName.hints.mandatory}"
                          columns="#{bindings.dbViewName.hints.displayWidth}"
                          maximumLength="#{bindings.dbViewName.hints.precision}"
                          shortDesc="#{bindings.dbViewName.hints.tooltip}" id="it1">
                <f:validator binding="#{bindings.dbViewName.validator}"/>
            </af:inputText>
            <af:button actionListener="#{bindings.changeVoQuery.execute}" text="changeVoQuery"
                       disabled="#{!bindings.changeVoQuery.enabled}" id="b1"/>
        </af:panelFormLayout>
    </af:panelHeader>
    <af:table value="#{bindings.DynamicVo.collectionModel}" var="row" rows="#{bindings.DynamicVo.rangeSize}"
              emptyText="#{bindings.DynamicVo.viewable ? 'No data to display.' : 'Access Denied.'}"
              rowBandingInterval="0" selectedRowKeys="#{bindings.DynamicVo.collectionModel.selectedRow}"
              selectionListener="#{bindings.DynamicVo.collectionModel.makeCurrent}" rowSelection="single"
              fetchSize="#{bindings.DynamicVo.rangeSize}" filterModel="#{bindings.DynamicVoQuery.queryDescriptor}"
              queryListener="#{bindings.DynamicVoQuery.processQuery}" filterVisible="true" varStatus="vs" id="t1"
              partialTriggers="::b1">
        <af:iterator id="i1" value="#{bindings.DynamicVo.attributesModel.attributes}" var="column">
            <af:column headerText="#{column.label}" sortProperty="#{column.name}" sortable="true" filterable="true"
                       id="c1">
                <af:dynamicComponent id="d1" attributeModel="#{column}"
                                     value="#{row.bindings[column.name].inputValue}"/>
            </af:column>
        </af:iterator>
    </af:table>
when I run the page this error is occured
<Nov 13, 2013 2:51:58 PM AST> <Error> <oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #1
javax.el.ELException: java.lang.NullPointerException
Caused By: java.lang.NullPointerException
Can any body help me please
thanks

Have you seen Shay's video https://blogs.oracle.com/shay/entry/adf_faces_dynamic_tags_-_for_a
All you have to do is to use the dynamic table to get your result.
Timo

EJB Finder View Links and CMR

Hi,
Can someone please give me some input on the following warning in the JDeveloper online help!
"Warning: You cannot create an EJB finder view link that expresses the same relationship as a CMR."
I'm new to EJB, BC4J and JDeveloper. I created container managed entity beans with local interfaces only to represent my data and relationships. No problems with the mapping so far.
To test the beans I used Session Facades with remote interfaces and build a sample test client.
Now I thought I could create EJB Entity Facades, EJB Finder View Objects, EJB Finder View Links and EJB Application Modules to make use of the BC4J framework in order to speed up programming clients (JSP and JClient).
So I've started studying the JDeveloper online help (which seems to be very useful) and found the above mentioned warning.
Well, better a warning than nothing at all, but some more explanations would have been even better.
Is there no need to use view links with CMR?
How to achieve the same functionality (synchronizing two view objects in a master-detail-relationship) with CMR?
Do you know any examples? I couldn't find any examples using EJB entity facades in the "sample code" area on OTN.
Any comments about other (better) architectures are also welcome. Would it be better to use BMP entity beans in conjunction with BC4J?
Many thanks for your help!
Regards,
Eric

Steven,
thank you for your reply and suggestions - I'll count on that. If I find time I'll read this book. It seems to be very interesting.
For educational purposes I'd like to look at both persistence implementation strategies. I agree that it looks definitly easier to use entity objects. Certainly it's also performancewise a better choice.
Anyhow, could you give me some useful tips for cmp entity beans and finder view objects?
Is there something which works completely different if I use BC4J on top of it?
How to implement a master-detail relationship in JClient (Swing) for example?
What about writing an ejbfinder which doesn't return all, but all data where the foreign key is equal to a parameter passed to the finder method and use this as the source for a detail view object. This could be the primary key of the selected master. Well, I don't know whether this is doable. But that's what comes to my mind spontaneously.
Would this be a solution? I'm still thinking about the aforementioned warning in the online help regarding view links.
I guess the problem is that the foreign key is not part of the entity bean as it's not a cmp-field. Instead you have accessor methods to retrieve a related object or a collection of objects.
I'm sure my questions are not too complicated to answer. It's only hard for a beginner to get an overview.
I'm quite confident that I'll manage this if I give my best and get some help from knowledgeable people like you Steven.
Regards,
Eric

Viewing MBR and Partitions

Similar Messages

Maybe you are looking for