Viewing more than one video at a time

Here is my example...
...I have a scene recorded with three cameras, now if i click on each video on the time-line, a new viewer will open and i can watch that video, now i can have a viewer open for each video, but only one will play at a time, is there a way to allow all viewers to play sequentially while i move and work along the timeline of the sequence that i am working on?...
...thanks for your help...Darwin

Hi Darwin
Yes best tool is FinalCut Pro and it's MultiCamera function.
But one can do it in a fairly easy way in FinalCut Express
• Drop Camera one clip into video track 1
• Camera two => V-track 2
• Camera three => V-track 3
Double click on the clip in track 1.
Now You see it in Viewer
Turn on Image + Wireframe (above the picture in viewer window)
Now shrink it to take up a Quater and move it up to the left hand corner
Repeat with track 2 and three but move them into a free corner
Now when You play TimeLine You see all three videos playing in concordance.
Now You have to move them so that they sync. I use a photo flash during recording
to get one white frame on all cameras
Then to the edit.
Turn on Toggle Clips Overlays [alt+W] - this turns on the transparicy line in each
videoclip and audio level on those
I use the transparicy line and the Pen tool to increase transparacy to 100% on the
part of a clip I want visibly and drag down the other two to 0%
When I've done this trough out the full TimeLine
• I go into each Video track and restore size to 100% and that they fill window
Now playback and see if You are satisfied.
Still - You now have to figure out on which Audio that works best.
Good Luck
BUT in FinalCut Pro this is very much more better and most of all time saving.
Yours Bengt W

Similar Messages

Viewing More than one report at a time

Hi guys, i have an application developed with 6i forms, when i call reports, it shows up fine but users cannot open more than one report at a time. All opened reports are cued up.
Is there any parameter i can set so that many reports can be viewed at the same time. Am using run_report_object to call reports.
Thanks
Jideofor

Hi Darwin
Yes best tool is FinalCut Pro and it's MultiCamera function.
But one can do it in a fairly easy way in FinalCut Express
• Drop Camera one clip into video track 1
• Camera two => V-track 2
• Camera three => V-track 3
Double click on the clip in track 1.
Now You see it in Viewer
Turn on Image + Wireframe (above the picture in viewer window)
Now shrink it to take up a Quater and move it up to the left hand corner
Repeat with track 2 and three but move them into a free corner
Now when You play TimeLine You see all three videos playing in concordance.
Now You have to move them so that they sync. I use a photo flash during recording
to get one white frame on all cameras
Then to the edit.
Turn on Toggle Clips Overlays [alt+W] - this turns on the transparicy line in each
videoclip and audio level on those
I use the transparicy line and the Pen tool to increase transparacy to 100% on the
part of a clip I want visibly and drag down the other two to 0%
When I've done this trough out the full TimeLine
• I go into each Video track and restore size to 100% and that they fill window
Now playback and see if You are satisfied.
Still - You now have to figure out on which Audio that works best.
Good Luck
BUT in FinalCut Pro this is very much more better and most of all time saving.
Yours Bengt W

How to view more than one file at a time in CS4?

With OS 10.5, and a brand new CS4 Photoshop, I can open many Photoshop files at a time, but can only view one at a time. Must choose one at a time from the "tab". I need to have more than one picture open and showing at a time to work on them. How can I do that? What have I missed? Who can help? Thanks!

"Here's the smart way for all of you on macs. Set up Exposé and a keystroke for 'Application windows'. Then with the press of a single key you can visualize, and swap between documents very easily. By I single keystroke I mean something like Right Control.
Tabbed documents have hardly any genuine advantages for mac users, yet another example of interface decisions in the stupid direction."
This is what I've been saying since I first saw the tabbed view in the new CS4. On the Mac, tabbed view is a big step backwards as it actually breaks the superior Expose' method of viewing multiple windows and also switching among them. I would also add that Control/Tab for non-tabbed windows is actually slightly faster than when they are tabbed. So for the mac, I only needed a minute to decide that the tabbed view was merely change for the sake of change. There are also operations that I do where I have to recreate a piece of art to match an existing piece. In those situations I always have the original right next to the the new image. Tabbed view destroys this as well. So I don't use it.
For the PC, tabbed views is possibly a tiny step forward, but it's such a small step that I'm not sure if I prefer to use tabs, or have that small amount of screen space that the tabs use. There was no previously existing "good" method of viewing and moving among multiple windows of a single application on the PC and therefore, tabs might be a small improvement. Unfortunately though it does seem that in order to bring us tabbed views in CS4, Adobe had to slightly 'break' the regular floating windows view. On the PC the documents will actually float above the toolbars, palettes,etc making it very difficult to use if not impossible. So, if you don't like using tabs, then you are really gonna suffer with non-tabbed view or suffer with the tabbed view. On the Mac, it's the opposite problem. Documents actually float up and underneath the top toolbar, covering the "close, maximize, minimize" buttons. Generally I would say that Adobe has created a mess when the best solution was obvious. Adobe should have copied the expose' method for it's CS4 suite. Hopefully they will have enough feedback with CS4 to see the light and change it for CS5. I see that Microsoft has mouse software that has already done just that on the PC, and there are a handful of independent efforts attempting to come up with something like expose' but generally with far less elegant and less "perfect" results.

View more than one sheet at a time from the same file?

I'm trying to view two different sheets at the same time from one file. This was possible in excel by opening a "new" window. Does anyone know how to do this in numbers?
Thanks for the help,

Skigilboa wrote:
I'm trying to view two different sheets at the same time from one file. This was possible in excel by opening a "new" window. Does anyone know how to do this in numbers?
You know what: Happily, _*Numbers is definitively not a clone of Excel*_ !
It's not forced to duplicate every features of this program !
We may see every tables of a given sheet
but we can't see tables of two sheets simultaneously.
This feature is very important because it's linked to
the one which allow us to have different orientation for different sheets.
Yvan KOENIG (VALLAURIS, France) dimanche 13 septembre 2009 15:04:06

Video Converter app that can convert more than one video at a time?

Hi everyone,
I;m after an app that i can convert my videos with. I want a free app where i can add multiple videos and have them convert one after the other? does anyone know of a free app that i can get?
I know theres smartconverter (free) but you cant add multiple videos and i dont want to pay $10 for pro!
can someone please HELP Thanks

The MPEG Streamclip app can batch process videos. It can even convert up to 4 videos at the same time.
http://www.squared5.com/
It's free...
Just drop as many videos as you like into the batch window.

How do I view more than one playlist at a time in iTunes 11?

I cannot figure out how to view multiple playlists at the same time, in iTunes 11 (mac version). Previously, I could just double-click on the playlist name, and it would create its own window. Then I could compare or move songs between different playlists.

I found it amusing that many of the questions can be answered with "impossible" when it comes to iTunes 11.
and yours as well I am afraid.

View more than one table in SD3 simultaneously

Is there a way to 'view' more than one table at a time in SQL Developer 3? Currently, if I have a tab open that shows contents of a table, and I double-click on another table I want to look at, the previous table view closes, and a new one reopens. I'm looking for a way to keep two such views open at the same time.
Has this question been addressed in the forum before?
Thanks!

...and the useful Preferences - Database - Worksheet - Automatically Freeze Result Tabs...
Have fun,
K.

How do I view more than one image at the same time in CS6?

How do I view more than one image at the same time in CS6?

Hi there
If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

Firefox will not load pictures, videos or more than one tab at a time. Help!

Hi there,
I have reinstalled Firefox 3.6 a few times, but it doesn't seem to fix the problem. When I try and load a site with pictures, videos (such as YouTube, but including a blog post with pictures), or more than one tab at a time, I just get "Untitled" tabs that don't even register the address. This happens especially when clicking to open a link in a new tab from a Google Reader.
At this point too, a lot of pages will not load correctly; even Firefox Help as it turns out!

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

ITunes 8.1 Can't Seem to do More Than One Thing at a Time

I upgraded to 8.1 and now, rather than a "faster" iTunes experience as was advertised on Apple's website, iTunes can't seem to do more than one thing at a time without locking up the application completely. For instance, when trying to download podcasts if I choose to hit more than one "Get" button at a time iTunes will freeze up until the first podcast has completely downloaded. During this time I cannot access any other screen in iTunes at all.
This freezing of iTunes also occurred while I was trying to sync my iPhone 3G. I received the Calendar sync error that a few other people have mentioned on the forum and wanted to turn off Calendar sync (since I don't use it and don't understand why iTunes turned it on by default, apparently, after the upgrade) but I had to wait for my iPhone 3G to completely sync before I could gain access to any of the tabs in the iPhone sync window.
So, basically it seems like the new version of iTunes (8.1) really doesn't like to be bothered while it is trying to copy data from one place to another.
Any ideas?

I'm using Vista Ultimate 64-bit and iTunes 8.1 installed OK, but required a restart of the entire OS after upgrading. It takes forever to launch, clicking on certain items (like applications) causes itunes to freeze for about 15-30 seconds before it continues (this is actually something that's been there since the introduction of the app store), I've had to switch my library view to LIST and avoid any sort of album art. Using album art to view my library causes iTunes to be extremely, obnoxiously unresponsive.
The best part - plugging in my iPhone to sync it... iTunes simply sits there dumbly - doesn't even recognize that I've plugged my iPhone in. So now I can't even sync. QUALITY product, quality. So the app I'm FORCED to use to manage my phone doesn't even work after upgrading. Outstanding.
I'm terrified of uninstalling and reinstalling... the last time I did that with iTunes it jacked my library up... it "lost" all of my music... basically it disassociated all of the music (even the stuff purchased through the itunes store) with the index file so I had to re-import EVERY song and delete the duplicate entry.
I searched a ton of forums looking for any clues as to how I could improve performance... All I run into is apple fan boys flaming any and all forums to the point of PC *****, no Apple *****, and so forth. Extremely unhelpful.
The fact is this - if I wasn't forced to use iTunes to manage my non-jailbroken iPhone 3G, then I'd dump it completely. It is a horrible app. Why punish the customers that haven't gone the route of "jail breaking" their iPhones?
One individual on one of the forums suggested that blue screens, and all the other random errors, including slow performance were due to a lack of RAM. I have 4GB of RAM on my machine I can run a virtual Fedora core 9 machine and a virtual WinXP machine on my Vista x64 box and still not have any performance issues with those two virtuals in the background sucking up system resources, yet with nothing open and less than 50% of my 4GB of RAM in use iTunes performance is abysmal. I have not run into any other application on my Vista machine that performs as badly as iTunes.
And Apple is touting a "64-bit" version of iTunes - it isn't. The applications the 64-bit installer installs are all 32-bit.
So, I'm searching as the two of you are for an answer to horrible performance of iTunes.
Even exiting out of iTunes takes a day and a half... "saving itunes library".... And my "library" isn't that big.

App that can send more than one attachment at a time....

Does anyone know of a app that I can send more than one attachment at a time like resumes + cover letters. Not having any luck with gmail or pages for the Ipad.
Please help

The MPEG Streamclip app can batch process videos. It can even convert up to 4 videos at the same time.
http://www.squared5.com/
It's free...
Just drop as many videos as you like into the batch window.

Can we open more than one "folder" at a time in Bridge?

When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
Please alleviate my ignorance.

Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
Not so quick way: Select menu File => New Window. Open the second folder there.
If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
1) View the parent folder in bridge.
2) Open the Filter palette.
3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

Can't gift more than one song at a time

Does anyone know how to gift more than one song at a time (not an album, but non-contiguous songs off one or multiple albums)?
I tried adding them to my wishlist so I could add in several, but I already own several of the songs and you can't add songs you already own.
Of course, this would be resolved if they would just bring back the shopping cart, but for now, I have no idea how to accomplish what should be a very simple task.

It is, indeed, frustrating, and seems short-sighted on Apple's part. Imagine a shop owner saying, "You can buy anything you want for yourself, as many as you like, but if it's a gift, you can only buy one."
I did receive a nice response from Apple confirming that this is, in fact, impossible to accomplish:
Dear Michael,
Welcome to iTunes Store Customer Support. I am Animesh and I will be assisting you today.
Thank you for your interest in giving an iTunes Store or App Store gift. I understand that you would like to gift multiple songs from different albums. I understand that this is important for you.
Michael, please note that you can buy a song, an album, a video, an audiobook, a TV episode or season, a movie, or an application for anyone who has a valid email address. However, there is no such option to gift multiple songs at a time from different albums. You are required to gift them individually, also the Wishlist feature is for personal usage and not gifting.
I can realize that it must be difficult for you. I have felt the same way in the past when I've found myself in similar circumstances. I have found in situations like this that voicing your opinion is a good way to get the "ball rolling".
Please know that Apple takes the feedback from our customers very seriously. This is the reason for our feedback page - to create a forum where our users can vent, praise or share whatever feelings they have to allow us to meet your needs, and grow as a company.
I took the liberty of submitting your feedback to Apple on your behalf. I would also encourage you to share this link with all of your friends and family who wish to submit the feedback, and have them all submit the same request.
Here is the link for you.
http://www.apple.com/feedback/itunesapp.html
I know sometimes it feels as though submitting feedback will not yield results, so I will also invite you to check out the following link. This is a letter from Apple's CEO addressing customers who purchased an iPhone very early on at $599, then the price went down to $399 shortly after. Mr. Jobs heard our customers and Apple responded accordingly.
http://www.apple.com/hotnews/openiphoneletter/
I hope that you will consider sharing your thoughts on the feedback page.
Michael, we very much appreciate your concerns, and if there's anything else I can do for you, just respond to this email and let me know. Thank you for supporting the iTunes Store.
Sincerely,
Animesh
iTunes Store Customer Service

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

File open on more than one computer at a time

I maintain a network of four Macs (Cube, G4 Tower, Mini, and G5 Tower) all running OS 10.4.11. Recently two people working on the network discovered that they both had a certain file open at the same time. In order to determine the extent of the problem, on each computer I created and kept open a TextEdit file. I then attempted to open each TextEdit file from the three computers on which the file was not stored. To my dismay I received no error or warning message of any sort. I was able to open all four files on all four computers at the same time!
Each of the computers has a single user, and each computer is logged into the other computers as the user on that computer (i.e., each guest is logged in as the host). I wonder if that might be the source of the trouble.
I never noticed any file being open on more than one computer at a time when all the computers were running 10.3.9, only after I upgraded to 10.4.
Any ideas?

This is absolutely standard behavior and I don't expect this to change any time soon.
Let me try to explain based on a model of a file stored on Server1 and being accessed by Client1 and Client2:
Here's what's happening:
Client1 connects to the server and opens the file for reading.
Client1 reads the file and closes it
Client2 connects to the server and opens the file for reading.
Client2 reads the file and closes it
Since Client1 closed the file there's nothing to indicate to Client2 that the document is in use anywhere else because, in fact, it isn't.
There's nothing on the server that knows whether Client1 opened the file to look at it, to copy it, to back it up to some other media or to actually edit it. It is only that last step that should prevent another client from opening the file.
If you think about it, that makes perfect sense. If you copy the file over the network to Client1 you do not want the server to think that Client1 has an exclusive hold on that file and to prevent Client2 from opening it.
The only time the file is in use is a) when the file is being read, and b) when the file is being saved. When it's just being viewed the client doesn't have an active hold on the file.
The actual fix here is for the application to set a flag that the file is in use and for the server to honor that flag. It's supported by the networking protocols but it's rarely implemented in applications except those that expect a multi-user setup.

Viewing more than one video at a time

Similar Messages

Maybe you are looking for