Viewing mov files when adding to layers

Hi, im having some trouble viewing my .mov files after adding them to my layers. I know the mov file is viewable because they are videos from Ready2go, and i can preview them on quicktime.
I import my files to my composition, then select the mov file i want to add to my layers, the layer is created but no video is viewable other than a small square box that contains the video. Its only using one frame for the entire video. Its supposed to creat a layer with as many frames as the videos length.
Anyone know how to fix that? im pretty sure is some property that im not enabeling or something, because it doesnt reject my mov files.

From the Digital Jouice website:
Proxies included for faster RAM previews
Requires Juicer version 3.81 or above.
To me this means you are using the proxies and they are in some odd protected CoDec. You will first need to run their Juicer app to extract their protected content to proper work files.
Mylenium

Similar Messages

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Using Aperture 3 and Lion I can no longer view .mov file

Using Aperture 3 and Lion I can no longer view .mov files from a Canon G11. I get a thumbnil which is a triangle with !. If I right click I can open it with Quick time. I cannot import any of the files into iMovie as it does not recognize them in Aperture or iPhoto. From other dicussions I tried removing 3ivvxVideoCodec.componenet from Quiktime Library and retarted with no success, so iI restored the file.

You are welcome;
there is another problem with videos, that might apply in your your case, when you reimport the videos, after you deinstalled the codec - the location you are importing from, and the permission settings, see this post:
Re: Aperture cannot read newly imported video since Lion upgrade.
Regards
Léonie

How to view .mov files on a pc?

how to view .mov files on a pc?

Thank you for your prompt responses. Thought this was the correct answer. Didn't want to pass on incorrect information.
Thanks

I am a beginner with video. What software do I need to view .MOV files on my Dell Desktop?

I am a beginner with video. What software do I need to view .MOV files on my Dell Desktop?

.mov is Apple "Quicktime".
You should be able to download a player here: http://apple.com/quicktime
Tim Campbell
5D II, 5D III, 60Da

Can't view .mov files in Organizer

Hi
I am in the process of moving my video footage from iMovie (Mac) to a Windows 7 PC with Photoshop Elements and Premiere Elements.
On my Mac I have converted the files to .mov with the 'photo jpeg' codec, which seems to be a fair compromise between size and quality. (Sadly, iMovie has converted all of it to Apple Intermediate Codec on import, which seems to be absolutely impossible to handle on a PC, so I have to do something, since I don't have the original files anymore ...)
On my PC, the files play nicely in QuickTime - they even played in Windows Media Player before I installed QuickTime. (However, I don't see thumbnails/miniatures of the files in Explorer.)
But ... when I import to Elements Organizer, I can neither play the files nor do I see any thumbnails. In stead, I get this error message:
'The selected file cannot be played because your system does not have the requiered compressor/decompressor (codec) installed'
Which I don't understand, since my system plays the files perfectly on itself.
If I try to add these files to a Premiere project, they do play back (but look awful), and I am able to export a clip (which looks OK).
But the whole point for me of using Photoshop/Premiere Elements was to organize my stills and video in the same application.
Any help would be greatly appreciated!

Regarding the quality in Premiere Elements, do the MOV files have the correct dimensions?
For example, you expect 1920x1080 but are actually getting 1620x1080. That can happen if you forgot to unlock the aspect ratio during conversion on the MAC. You type in 1920 for horizontal width and then type in 1080 for vertical height, but don't see that the horizontal width was automatically adjusted to 1620. And off you go. That can make the video look bad in Premiere Elements, although it shouldn't affect whether you can view the files in the Organizer.
The MOV files shouldn't play back in Windows Media Player on a PC (at least on my system they don't), unless you have installed a codec pack or another application has been installed that installed a quicktime codec that allows playing MOV files in Windows Media Player.
When you are in Windows Explorer with the view set to Thumbnails, if you don't get a thumbnail image for the MOV files, you might be able to fix it with the Codec Tweak Tool. After installing and running it, click on the Thumbnail button and select the MOV option if it isn't selected. http://www.videohelp.com/tools/Codec_Tweak_Tool. I'm not sure that will have any effect on the view in the Organizer, but it's worth a shot.

Can't view .MOV files in IE 7 or IE 8

I can't view any quick time files through IE7 or IE8 when trying to access them through one of our FTP sites. When I go to our ftp site and click on a .mov, there is a 3-5 second pause then i get the Quicktime logo with a queston mark through it.
If I load the file onto my local drive, it plays just fine. If I bring up Firefox and click on the .mov file through our FTP site. It plays just fine. I'm not sure what else to look at for the possible problem. I have Quicktime ver. 7.5
Robert

Your post did not specifically say which version of Photoshop abnd Premiere Elements you have - I am guessing that you have version 9.
For both versions 8 and 9, the Organizer component is the same for both Photoshop Elements and Premiere Elements. So since your specific question is about video in the Adobe Elements Organizer, I suggest that you also post this question on the Adobe Premiere Elements forum because it has more participants knowledgeable in video (and its technical aspects such as codecs). Here is the link
http://forums.adobe.com/community/premiere_elements

Unable to view .mov files on Vista 64 bit system:

I use a MacBook Pro to download videos from a Canon HD camcorder. These files are saved as *.mov files. While I can view these files on my MacBook Pro, I cannot import/view them on my Windows based PC, using PRE 8. I purchased this software because it was supposed to support editing .mov files. When I try to import a .mov file I get and error "Codec missing or unavailable." Shouldn't the codec for .mov files be included in PRE 8? Any ideas on how to solve this issue?

Thank you for your response.
I have download the latest version of QT twice, even purchased QT pro, no luck. I have even re-installed PRE 8.
I have updated my video drivers and downloaded GSpot and MediaInfo to see what codec's I need. According to everything I've read and done, PRE 8 should work. Just as a side note; in QT pro for Windows, I can import .mov files but only the audio plays no video.

How to view .mov files on ipad

I use my iPad to store both jpg and mov files directly from my camera when on the road. I would like to be able to view the .mov files on iPad without the use of a computer. Is this possible?

It depends what video codec the .mov files use. The video formats/codecs supported by the iPad are:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Can't view .mov file with quicktime

Hello. I need help viewing a .mov file with Quicktime 7.5. It was recorded on a Canon Vixia HV30 camcorder and given to me on a dvd. But when I try to view the .mov file with Quicktime, I can hear the audio but the screen is black. Sometimes, it asks me to continue to the following link:
http://www.apple.com/quicktime/resources/components.html?os=Windows&ctype=696d64 63&csubtype=69636f64
I'm not that computer savvy - what is wrong? Any advice would be greatly appreciated. Thanks in advance!

Sorry. My "then" (above) should have been "they".
They sent you a data DV containing the "source" from the camera and the HDV codec isn't available on your PC so you can't view the file.
Ask the authors to convert the file using H.264 Video codec (or others) so your Windows version of QuickTime can play the file.

Need help viewing mov. files in Quicktime 10, with Mac OS X, 10.6.7

I have Quicktime 10.0, and laptop with Mac Os X, version 10.6.7. I can't view certain mov files. So I looked up info online, that said to download Quicktime verson 7 to run with Version 10.0. When I downloaded Quicktime 7, I was told I could not install it because I already had Quicktime 10.0. Could definitely use some help!

Thank you so much! I successfully download the other version of Quicktime.
But, I'm still unable to view my mov file. I looked at the 'more info' tab and the Codecs is: MPEG-2 Video, Linear PCM, Timecode.
Any ideas of how I can get this file to play in Quicktime, or open in Final Cut?

Unable to view .mov file on fcp 7

Hello,
I've been sorting through previous posts hoping to find a solution to my problem, but so far everything that's been suggested has been unsuccessful for me. I have a QT mov file (codecs: AVdn, Linear PCM, Timecode) that when imported to FCP 7 only plays audio. White screen is displayed on the viewer. I've tried converting it to other formats and every time only the audio plays. It will not open in quicktime, however, in vlc the video and the audio both play. I'm looking to be able to re-edit this project, so please, how can I get the video working?

The media is in codec not supported by QuickTime on your machine. I think it's an Avid codec. Their codecs can be downloaded from their web site. You can probably then use Compressor to convert it. How you convert it I can't tell without complete information on the source file. Check exactly what it says in movie inspector in the QT player.

How to view mov files on quicktime?

Recently downloaded a movie made on iphone, which downloaded as a .mov file. However, when I double click, quicktime tries to open it but then I get an error message which says "QuickTime Player can't open "IMG_18621.MOV". and gives me an option: "To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More." I can't figure out a way past this. I was on Mountain Lion and didn't have this problem, but recently upgraded to Mavericks and this problem has developed. Thanks!

Thank you for your prompt responses. Thought this was the correct answer. Didn't want to pass on incorrect information.
Thanks

Can't view .mov files

Hi, I periodically will click on files labeled as .mov, but when QuickTime starts up I get a message saying a plug-in is needed. Then since I don't knowwhat to download and I try the file again the error message doesn't show, but the QuickTime windo opens like it is going to play the movie, but all the happens is the progress bar along the bottom moves but no video or sound occurs.
I thought .mov files were made for QuickTime? I don't know what plug-in of all the ones listed I'm supposed to download.
The file I want to open is:
http://willametteexplorer.info/media/lrgtrajchg.mov
It is found at this site:
http://willametteexplorer.info/index.php
Thank you for your time!

QuickTime can use plug-ins called components to create different types of compressed media. Some older components such as Intel's Indeo codecs were available for Mac OS 9 but are not available for Mac OS X (although MPlayer can play Indeo 3 in OS X.)
Here's a list of components and some info. If you identify what type of video encoding was used in the files it will be much easier to decide which component to dowload...
http://insanityflows.net/archive/index.php?title=QuickTime

Can't view TIF files when opened

My son's yearbook publisher wants TIF images. Try as I might,
I can't seem to VIEW TIF files in Fireworks or Freehand.
All I see is a box with multi-colored dots when opened.
ANy ideas what the problem might be? Thanks.

On Tue, 11 Sep 2007 05:37:23 +0400, Wireless Tech Radio2
<[email protected]> wrote:
>
>
> My son's yearbook publisher wants TIF images. Try as I
might, I can't
> seem
> to VIEW TIF files in Fireworks or Freehand.
> All I see is a box with multi-colored dots when opened.
>
> ANy ideas what the problem might be? Thanks.
Not sure but maybe some exotic compression? Where did you get
that TIFFs
and how they were prepared?
Ilya Razmanov
http://photoshop.msk.ru -
Photoshop plug-in filters

Viewing mov files when adding to layers

Similar Messages

Maybe you are looking for