Viewing on external monitor with ADVC-100 and s video

I am trying to view my canvas on a external monitor. I have a canopus ADVC-100 and i am using the firewire input and the s video as the output in the back. When I try to set it up and i select view all frames, but when i go to the video output menu it says my firewire device is missing. Any hints or tips on what i am doing wrong. I am using the s-video because the monitor only has a components input available, the RCA's are already occupied.

Is the ADVC powered? When you connect firewire to the back of the unit, it gets powered by that connector, but the firewire jack on the front is only 4-pin and doesn't support power.
If you have a 6-pin to 6-pin firewire cable, try connecting it to the back of the ADVC110 and then the front of the box should light up, indicating power.
I'm having a similar issue. I can print to tape via the Canopus box, but I want to be able to drive a monitor with it just so I can have an NTSC monitor while I'm editing. I can't seem to make it work. Any ideas?

Similar Messages

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

If I buy an external monitor (with a res of 2560x1440) will my early 2011 MacBook Pro work ok? And will it be utilising the monitors full res or not?

Hi,
I have an early 2011 MacBook Pro. I use Premiere Pro CS5 to video edit on. It's fine but when it comes to grading it's nearly impossible on such a small screen.
I'd like to buy a 27inch external monitor (Asus, Samsung, Dell, whatever - haven't decided yet) for when I'm editing at work (which is most days). My query is regarding the resolutions. Obviously my MacBook Pro displays a resolution of 1280x800, so if I buy a monitor with a resolution of 2560x1440 for example, what gets displayed?
And also does the connecting cable make any difference? For example, if I'm connecting by Thunderbolt out to HDMI, then an HDMI to HDMI cable to the external monitor, what happens then? Or should I be using a Mini Display Port to Display Port connecting lead?
I guess all I really want to know is, will it work? But also, am I wasting my money buying an external monitor with a 2560x1440 resolution? Should I just go for one that's the same res at my MacBook Pro?
I've never really understood how these things all work!
Thanks in advance for anyones help.
Regards,
Phil

I think it will work. You would need a mini displayport to (single link) DVI adapter to hook up that monitor.
Not sure what kind of problems you had with the ViewSonic but I'm guessing the Dell is probably a better monitor anyhow.

How do I view an external display with my macbook pro closed?

How do I view an external display with my macbook pro closed? I am using a wireless keyboard and trackpad, and I would like to use a larger (Dell) monitor with my Macbook Pro closed.

Here are the rules for Clamshell mode:
http://support.apple.com/kb/HT3131

How do I use two external monitors with my laptop?

I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I am used to using two external monitors with a docking station. This new laptop does not have a docking station. What do I need to get to use two external monitors?
This question was solved.
View Solution.

Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming. HP makes no true docking station for your laptop.

External Monitor with iTunes - iMac screen goes black

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help! Further info: I am a complete newbie to Mac. Had three macs prior to 2000 then four PCs. Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back) with the F4 function key. While I can get the background image from my MBA to display, that's it. Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on. So Idragged it over to display in the centre. But that's all that's there. And now I have gone out of those web pages but they are still displaying on the monitor. There is some wierd disconnect. I'm sure it is just a setting thing. Will keep searching for answer but any advice welcome!

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

2 External Monitors with W520 Laptop?

I'm running Windows 7 / 64 bit on my Lenovo W520 laptop.
Is there any way to connect two external monitors to the unit and have them show independent screens from Windows?
Robert W.
Solved!
Go to Solution.

RobertWerner2 wrote:
If I'm reading the link you provided correctly, can I correctly assume that I CAN connect two external displays with just the W520 Laptop and NO docking station?
I tested this today. You can connect two external displays (1 VGA, 1 DisplayPort) without a docking station. The result is 3 independent displays - the ThinkPad LCD, the VGA monitor, and the DisplayPort monitor.

2 External Monitors with the T430s with Intel HD4000

I have read several multiple monitor threads but could not get a clear solution to this.
Model: I have a T430s with Intel HD4000 graphics.
Desired set up: 2 External Monitors + Lenovo LCD
Problem: It seems that I can only drive one external monitor. I'd like to drive two external monitors, as I did previously with my T420.
What I've tried: I have a dock and have tried VGA + DVI for the external monitors, as well as DVI + DVI. Neither setup has worked. It always greys out the third monitor in the Windows Display options.
Any thoughts on how to drive two external monitors with the T430s? Clarity is appreciated. Thank you!

RobertWerner2 wrote:
If I'm reading the link you provided correctly, can I correctly assume that I CAN connect two external displays with just the W520 Laptop and NO docking station?
I tested this today. You can connect two external displays (1 VGA, 1 DisplayPort) without a docking station. The result is 3 independent displays - the ThinkPad LCD, the VGA monitor, and the DisplayPort monitor.

Only black screen on the external monitor with intel-virtual-output

Hello,
I tried to install bumblebee on my Lenovo W520 with this tutorial:
http://www.unixreich.com/blog/2013/linu … ly-solved/
I can activate my external monitor with "intel-virtual-output" and the monitor is switching on. But I can only see a black screen.
In the settings of gnome I can see my external monitor and configure it - but it shows nothing.
Have you any ideas?
Thanks a lot!

Hi,
Same problem here on my Lenovo W530.
Intel-virtual-output used to work fine but since it got upgraded the virtual output stays black.
I tried downgrading the xf86-video-intel package but there is a dependency conflict.
Available packages:
1) xf86-video-intel-2.99.916-3-x86_64.pkg.tar.xz (local)
2) xf86-video-intel-2.99.916-3-x86_64.pkg.tar.xz (remote)
3) xf86-video-intel-2.99.916-2-x86_64.pkg.tar.xz (local)
4) xf86-video-intel-2.99.916-2-x86_64.pkg.tar.xz (remote)
5) xf86-video-intel-2.99.916-1-x86_64.pkg.tar.xz (remote)
6) xf86-video-intel-2.99.914-4-x86_64.pkg.tar.xz (local)
7) xf86-video-intel-2.99.914-4-x86_64.pkg.tar.xz (remote)
8) xf86-video-intel-2.99.914-3-x86_64.pkg.tar.xz (remote)
9) xf86-video-intel-2.99.914-2-x86_64.pkg.tar.xz (remote)
10) xf86-video-intel-2.99.914-1-x86_64.pkg.tar.xz (remote)
11) xf86-video-intel-2.99.912-2-x86_64.pkg.tar.xz (local)
12) xf86-video-intel-2.99.912-2-x86_64.pkg.tar.xz (remote)
13) xf86-video-intel-2.99.912-1-x86_64.pkg.tar.xz (local)
14) xf86-video-intel-2.99.912-1-x86_64.pkg.tar.xz (remote)
15) xf86-video-intel-2.99.911-2-x86_64.pkg.tar.xz (local)
16) xf86-video-intel-2.99.911-2-x86_64.pkg.tar.xz (remote)
17) xf86-video-intel-2.99.911-1-x86_64.pkg.tar.xz (local)
18) xf86-video-intel-2.99.911-1-x86_64.pkg.tar.xz (remote)
19) xf86-video-intel-2.99.910-1-x86_64.pkg.tar.xz (local)
20) xf86-video-intel-2.99.910-1-x86_64.pkg.tar.xz (remote)
21) xf86-video-intel-2.99.909-2-x86_64.pkg.tar.xz (local)
22) xf86-video-intel-2.99.909-2-x86_64.pkg.tar.xz (remote)
23) xf86-video-intel-2.99.909-1-x86_64.pkg.tar.xz (remote)
24) xf86-video-intel-2.99.908-1-x86_64.pkg.tar.xz (remote)
25) xf86-video-intel-2.99.907-2-x86_64.pkg.tar.xz (local)
26) xf86-video-intel-2.99.907-2-x86_64.pkg.tar.xz (remote)
27) xf86-video-intel-2.99.907-1-x86_64.pkg.tar.xz (local)
28) xf86-video-intel-2.99.907-1-x86_64.pkg.tar.xz (remote)
29) xf86-video-intel-2.21.15-1-x86_64.pkg.tar.xz (local)
30) xf86-video-intel-2.21.15-1-x86_64.pkg.tar.xz (remote)
31) xf86-video-intel-2.21.14-2-x86_64.pkg.tar.xz (remote)
select a package by number: 16
loading packages...
warning: downgrading package xf86-video-intel (2.99.916-3 => 2.99.911-2)
resolving dependencies...
warning: cannot resolve "glamor-egl", a dependency of "xf86-video-intel"
:: The following package cannot be upgraded due to unresolvable dependencies:
xf86-video-intel
:: Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: xf86-video-intel: requires glamor-egl
Any Ideas what glamor-egl is?
Thanks!

How to run an external monitor with lid closed

how to use an external monitor with the "lid" closed

You can use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131

Dual External Monitors with 15" MacBook Pro (Late 2011)

I'm looking for suggestions for using dual external monitors with new MacBook Pro's. The company I work for has started to puchase these for certain employees and we are looking for any good suggestions.
It appears that the display/thunderbolt port should be able to support many devices but I have not seen any way to hook up multiple displays. The idea is that these employees would be working with the macbook pro screen closed while in the office and use dual displays. The only option that I can find is to use a usb device to output video to a second display. I don't really like that because my experience with these devices is that they usally present a display lag and I know our graphic designers would never go for that.
One employee suggested that he use the VGA adapter and then get a VGA splitter. I'm not exacty certain that would work though. Wouldn't that just mirror the display on two screens instead of allowing an extended desktop? Also it looks like expensive Apple displays have ports so that you can daisy chain thunderbolt devices out of those monitors but this company will not go for the cost of those displays.
Am I missing anything? Any suggestions would be helpful.
Thanks!

Look into the Matrox Dualhead2Go DP Edition. If it works with Thunderbolt Macs, it will support two identical 1920 x 1080 DVI monitors as one extended desktop. Verify with Matrox that it is Thunderbolt-compatible and will suit your purposes before ordering.

Connect 2 externa monitors with different resolutions?

Is it possible to oonnect 2 external monitors, with different resolutions to a mbp pro?
I've read some about the "matrox solution", but that one requires that the monitors uses the same resolution.
And, just to be clear, I don't want to just duplicate the screens, one should be primary.

You may want to phone OWC and ask whether what you want to do is possible if one monitor is connected to the mini-Displayport and the other is connected to a USB port using this adapter:
http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/
Note that the OWC adapter, like most USB video adapters I've seen advertised, is limited to a maximum resolution of 1600 x 1200, so you won't want to use it with a monitor whose native resolution is higher than that.
Message was edited by: eww

What Do You Monitor With PRTG 100?

We've collected various scenarios you can monitor with the free PRTG license that now offers 100 sensors.
Are we missing anything? What do you monitor with PRTG 100?
https://www.paessler.com/howto-free-network-monitoring

Howdy, SpiceHeads!Todd here fromCRTL+ ALT + TECH, the IT pro web show. I've got a question for you. Actually, Jeff does. But he decided to celebrate SysAdmin Day a bit early by going on vacation. So I'm going to post on his behalf :)Jeff asks,Todd and I were discussing with all the different positions and roles in technology, what is the BEST job description for a SysAdmin?Put it this way, if you had a meeting with the Bobs, What would ya say, ya do here?https://youtu.be/2SoWNMNKNeMBe sure to tune into the show this Friday for a specialSysAdmin Day episode! Plus, we'll share your replies to this threadlive on the show.Cheers,TD

Viewing on external monitor with ADVC-100 and s video

Similar Messages

Maybe you are looking for