Viewing on external NTSC monitor

Here is my setup, I have a Dual 2.7 GHz G5 with a X800XT 256 MB video card with ADC and DVI outs. I had an older card in there with 2 DVI's connectors and one of them had a DVI to Video Adapter to the NTSC and all was fine.
When I got the new video card I had to plug the LCD into the DVI connector and I installed an older ATI Radeon PCI card to runt he NTSC monitor. Not sure what model the the older card is but it does have an svideo out and DVI out. I have tried with the NTSC monitor plugged into the DVI connector with the DVI to Video adapter and plugged directly into the svideo out. Plugged into the DVI and adaptor the video is distorted and unusable plugged in directly to the Svideo port the video works fine but I can't get Final Cut or anything else to recognize it as the NTSC video out device.
My thought is that either the PCI card I have is too old for the Apps to recognize it, or that the Apps with only work with the primary AGP graphics Card.
Has anyone else had this problem? and is there an easy solution?
I have a ADC to DVI adaptor on order to give my new video card dual DVI outputs hopping that will fix the issue.
thanks
Ken

Easy solution...don't do this. Route the signal thru your deck or camera:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Similar Messages

  • How can I view on external NTSC monitor in PRCS6?

    NOTE: I've aksed this quesion before on this forum and followed the kind suggestions given, however, I have not yet been successful. Note that I can view my timeline on my external broadcast monitor just fine in FCP .. anyone??

    Hi Steven,
    Thanks for jumping in.
    I cannot find "Enable Transmit" anywhere under any menu ... just for clarity, I have CS6, not PRCC.
    As a side note - not sure why this should be an issue at all, and why it is not readily explained by Adobe ... there does not seem to be any aswers anywhere from Adobe, or online also for that matter. Seriousely, anyone who's an editor is going to want to view their work in an extenral NTSC monitor, and not on the computer display ...
    Many thanks

  • Can I use a Dell W3706MC 37" LCD HDTV as an external NTSC Monitor?

    Hello,
    I was considering buying this dell TV as a second monitor for my studio as i mostly do audio post production and score music (this size monitor would be excellent for working on scores in my case) on a full time basis but I am expanding into film editing as well.
    My question is can i use this as an external NTSC monitor for FCP 4.5HD and version 5? Any help would greatly be appriciated. You can view the tech specs of this TV at http://www1.ca.dell.com/content/products/productdetails.aspx/lcd_w3706mc?c=ca&cs =CADHS1&l=en&s=dhs
    Best Regards,
    Leon Thomas
    MSD Studios
    Power PC G5   Mac OS X (10.3.9)   1.8 GHz, 1.5Gigs Ram, 160 Gigs Internal HD

    While it might be fine for corporate video or other non-broadcast work, it won't be appropriate for broadcast work. For that you need to buy a broadcast monitor.
    The reason is that if you take 20 TVs of various models, and put them side by side (say you went to Circuit City or Best Buy), you wouldn't see the same image twice. They all would be slightly different. Even if you calibrated them, they might all look slightly different. But put 20 broadcast monitors side by side, all calibrated, and you will see exactly the same image and color representation.
    Shane

  • External NTSC Monitor - 4:3 and 16:9 Question

    I'm trying to find a configuration setting in FCP 5.0 when outputting to an external NTSC monitor that will force the image to "letterbox", rather than crop to 4:3.
    I have a nice Sony NTSC monitor, but it's not the model that allows switching between 4:3 and 16:9 aspect ratios, unfortunately.
    I don't want to have to replace this monitor at this time.
    I see in the latest version of After Effects I can force the image to "letterbox" in the external monitor. I tested it, and it works perfectly.
    Ironically, PhotoShop CS3 does NOT allow you to letterbox your preview to an external monitor. A widescreen formatted file appears cropped in my monitor.
    So, my question is can I do this in FCP 5.0? Why am I stuck with a cropped image from a 720x480 aspect ratio? Is there a setting somewhere that will force the preview to letterbox on my monitor?
    On a similar note, what will we use to replace NTSC monitors if you're shooting and editing HD?
    Thanks so much.

    FCP will not unsqueeze the image for you...you need a monitor that has this option.
    what will we use to replace NTSC monitors if you're shooting and editing HD?
    And HD monitor. But then you need some sort of HD capture card or output device (unless you are working with DVCPRO HD)...even HDV. And then you will need an HD monitor. The cheapest solution might be the Decklink Intensity and small HDTV...the intensity has HDMI out. But this only works if you have a MacPro. The MATROX MXO is next, and it connects via DVI. It can output a signal to an HDTV (component), or to an Apple Cinema Display or Dell 24" Display. That gets you broadcast quality on a computer monitor...believe it, or not!
    http://library.creativecow.net/articles/ross_shane/MXO.php
    Shane

  • External NTSC monitor setup

    When I use an external NTSC monitor connected to an Apple DVI to video adaptor then to a Radeon 800XT video card I have many crashes. It seems like these are caused by the External monitor setup. I would to know what sort step up others are using for external video. And what kind of success you are having with them.
    Thanks
    Ken

    I to have had the same problem, in fact, I just posted about it a few days ago. Hopefully Apple's monitoring this forum and looking at the issue. The only solution I've found is to disable the external preview, which is quite frustrating. Just a question have your crashed happened while you're working or when you perform application switching. I've only had problems when I apple-tab to another program and then do the same to get back into Motion.

  • IMAC output to external NTSC monitor

    To see FCE video and audio files from an iMAC on an external NTSC monitor, what is the best way to set this up?
    What video/audio convertor boxes are used?
    Bill

    If your camcorder doesn't support analog-digital passthrough, you will need an analog-digital converter like the Canopus ADVC-110 to connect your NTSC monitor to your Mac. You'll connect via FireWire from your Mac to the converter, and analog (composite or s-video + audio) from the converter to your NTSC monitor.

  • Playback on External NTSC Monitor

    My deck in my non-linear editing system is the Panasonic AG-DV2500. I have always had an external "client monitor" which was a Sony NTSC studio monitor hooked up to the "output" of the deck. This time, I have one of the Sony LCD studio monitors. When I capture, the video in the capture window is in sync with the NTSC monitor. But when I put the captured video on the timeline and play it, the video and audio is out of sync on the external NTSC monitor. What am I doing wrong? There has always been a slight delay between the playback window in Premier and the external monitor, but not like this!

    I guess it's more accurate to say that there is a dramatic delay in the video between what I'm seeing in the playback window on my computer monitor and what I'm seeing on the external NTSC monitor. The audio does not have that delay, so on the external monitor the audio and video are out of sync. It makes it difficult to show anyone what you're working on, which is what the "client" monitor is supposed to do.

  • External NTSC monitor viewing?

    I have an NTSC monitor hooked up to my JVC mini dv deck for use with FCP. Plays back fine in FCP. How do I configure so I can see it when working in DVD Studio Pro? Simulator is all I can figure out.
    Thanks!

    there is no facility to monitor using an NTSC or PAL monitor in DVDSP
    only work around is to burn a test disc and play back in a DVD player

  • Problems viewin external ntsc monitor

    I can only view the external monitor when I use the print to video function. When I'm editing there is no video showing on the external monitor. The video out is set to Apple Fire wire NTSC. I am using the ADVC-100 as the conduit to the monitor. I have tried both DV-NTSC and DV-NTSC- Firewire Basic in Easy Setup.
    Please help
    Thank you

    Make sure you have the setting correct on the box. It should be recognized any time it is connected. Trash your preferences and set it up correctly. Use the DV Converter setting, none other.

  • Frozen when view on external video monitor HELP

    Hi everyone, I have just finished my biggest project in 3 months. Thankx for all your helps & I love the MULTICAM feature very much.
    Now i'm on the second project. This project was shot on DigiBeta PAL.
    To make it short: does anyone has a frozen picture as they play it out to the external video monitor for the uncompress 10bit file?
    3months ago when I digitized in as uncompress 10bit , fcp play out to external monitor FINE, including the multicam feature.
    However, since I need to work with 10cam at the same time, I have to capture in as DV (my source was DVCAM) so fcp can play all 10cam in multiclip mode. everything went perfect.
    TOday, I capture my sources both NTSC & PAL, they can only play in the mac monitor but not the external video monitor. feeding out to external monitor make the clips freeze. the picture is frozen but the audio still playing.
    My drives are fast enough since we had been working with these MEDEA drives for years.
    thank you so much.

    thankx for all your helps but I had tried all those before I post the question. I'm no newbie. It must be FCP's bug. I trashed the pref & select 8bit instead of 10bit for viewing, & it play ok for single clip. On multiclip, it shutter alittle bit. Maybe I need to reinstall fcp. Don't know yet.
    thankx
    JP

  • Livetype to External NTSC Monitor

    Is it possible to view Livetype 1.2 on an NTSC monitor?
    Thanks,
    Jon

    If your camcorder doesn't support analog-digital passthrough, you will need an analog-digital converter like the Canopus ADVC-110 to connect your NTSC monitor to your Mac. You'll connect via FireWire from your Mac to the converter, and analog (composite or s-video + audio) from the converter to your NTSC monitor.

  • Final Cut Studio 2 and External NTSC monitor

    Hello.
    I just purchased the imace 20" 2.4 machine. It's still in the box as I'm getting all my old files off my pc (last one, this makes me all mac!).
    My question is this. I have final cut studio 2. What I want to do i use the mini-dvi output to go to an NTSC monitor for final Cut playback.
    I haven't been able to find a solid answer on this. I know I can get another external VGA/DVI monitor and it would be work, but I need to use an NTSC (4:3) monitor for some projects.
    Is this possible?
    Thanks!
    Bobby

    Well, you can't use the file he sent unless you upgrade. But if you get the card dumps back, you should be able to LOG AND TRANSFER to ProRes on your system fine. Or was that the issue? They had garbage at the end?
    Trashing preferences fixes a lot of FCP oddities.
    Shane

  • Viewing FCP on NTSC MONITOR

    In my days with PC I used to watch my timeling in Premier Pro on my NTSC monitor. I had a Matrox card with an outbox and connected the svideo out on the box to my monitor.
    Now in the Mac Pro I have dual outputs on my ATI Raden card and all I get on my NTSC is a duplicate screen.
    Is there no way to do this? No one at Apple is of any help with this.'
    Thankds
    bobby43

    There are plenty of A/D converters on the market, but they have nothing to do with the DVI ports. Those will just give you a second monitor to mirror or extend your computer display.
    What camera are you using? Most will convert the signal (FW to the camera, analogue out of the camera to the monitor) but there are some preferences in FCP that you have to set.
    For converters, check out the line from Canopus.
    rh

  • Hot To Monitor video from FCP on an External NTSC Monitor

    Can someone point me in the right direction?
    Is there a tutorial on setting-up for monitoring your finish work to an external monitor?
    I saw it somewhere a while ago, but can't remember the link
    Any help would be helpful
    thank
    Ron

    I'm guessing you mean 'How' To...
    This may not be the way you want to go with your setup, but it works well for me.
    I have a Canopus ADVC100 that I purchased at a reasonable off eBay. The newer version is:
    http://canopus.com/products/ADVC110/index.php
    Not only can you monitor while editing, but you can capture from any video device (digital or analogue) as well as export to any device..
    Nick. . .
    G4 PowerBook 768Mb & QuickSilver 1.5Gb (FCP 4 & 5 _ DSP 4)   Mac OS X (10.4.7)   Linux and Wimpdows

  • Viewer won't output to NTSC monitor in FCP5.1

    Hello!
    I was used to being able to view my clips in the viewer on my ntsc monitor in HD, since upgrading to FCPStudio5.1.1, I can't seem to find an option for this, the manual mentions none, and a search provided no answer related to the viewer. I am able to watch the timeline just fine on my ntsc monitor.
    Is this a new change with FCP5?
    Thanks!
    Ymir

    I am connected to a Sony mediaconverter via firewire.
    It connects to my tv monitor. External video is set to all frames. After refreshing a/v devices, the viewer will now output to the screen when using "gang" setting. If I use sync off, I get current frame its stopped on. Open gives nothing. Is there a way to make gang the default so I don't have to set it for each clip?
    Thanks
    Ymir

Maybe you are looking for