Viewing PDF After Exporting from InDesign

G'day from Australia.
My name is Steve, I do a bit of freelance work from time to time but I'm also employed by a Christian Minstry in Brisbane.
Recently I have encountered (and not just me but my manager as well) that when creating a pdf from InDesign, Acrobat is launched for me to preview the document but it then says that it can't open the document because it is either a wrong file type or because the file might but corrupted. However if i go to the exported document and open it manually it opens fine without any glitches.
I've searched the web to see if there are any answers to this issue but could not find any.
We use Adobe Design Premium CS4 on Windows based machines. All our files though are kept on our own local server. The server however is not run on microsft software but on a Novell Software system. Before we went with Novell we used to use windows server software and there were no issues with exporting and previewing pdfs straight from InDesign. Not sure if its related but I thought i'd mention it just in case.
Any help would be much appreciated.
Regards,
Steve.

What you are describing sounds like some type of file locking or caching problem on the Novell Netware side. I suspect that when InDesign's PDF export completes, it closes the PDF file on the server, immediately calls Acrobat to open that file, but on the server, either the file is still locked from when InDesign had it open for output or perhaps not all the file's blocks have been written out to disk yet. By the time you then try to manually open the PDF file via Acrobat, the timing issues have been resolved on the Netware side.
Adobe applications use standard Windows file operations to create, open, close, read, and write files. There is no cognizance of whether the file is local or on a network and if on a network, what type of server is hosting the file.
For what it is worth, Novell Netware is really obsolete server software. The last version, Netware 6.5, was released in 2003 with the last service update for NetWare 6.5 from Novell in 2008. You didn't mention what version of NetWare you are using, but if you have anything other than NetWare 6.5, I could imagine some really serious disconnects between modern Windows client desktops and the server software.
You indicated that you didn't have any problems with a Windows Server. I am amazed that any organization would migrate from Windows Server to Novell Netware anytimg during the last six to ten years, although I suspect there was some reason that somebody thought was good. However, your organization most should seriously consider moving back to Windows Server. Your PDF viewing problem is probably only the tip of the iceberg of problems you may potentially encounter.
- Dov

Similar Messages

Shaded areas on PDF after exporting from Indesign

Hello, I'm working on booklets for work using Indesign. So far most of the information in the booklet have been placed by PDF files. My supervisor sent me another PDF he would like added to the booklet. My problem is when I placed the PDF onto the page it looks fine but once I export the booklet from Indesign to PDF you see shaded areas on the page. This has never happened before and I can't seem to fix it. Does anyone have any ideas?

So the sidebar frame is a native ID text frame? I see two shaded areas inthe screen shot that interect that sidebar, and neither of them seems really related to it in any way.
Are you willing to share the file with me for examination?
Have you tired the standard Troubleshooting 101 steps: Replace Your Preferences and Remove minor corruption by exporting?

Doted stroke irregularities in pdf after export from indesign

Hi,
I have created a grid of doted strokes, the doted stroke have a repetition of 0,25mm, and the thickness 0,4 pt the strokes are duplicated 5 mm intervals x and y axis.
In indesign the preview is perfect and the dots are perfectly aligned but when i export to pdf it generates misalignment with the dots.
If i make a eps export and destill the file it works.
indesign cc and acrobat 11

How does it look if you print it, (from Acrobat)?
I suspect it's just the Acrobat display. Try this:
In Acrobat: Edit > Preferences > Page Display > Enhance Thin Lines...untick

PDFs dull in Acrobat after exporting from Indesign - again

Hi folks,
I am aware of a previous post which discussed this issue which was apparently resolved, but it appears to have reared its ugly head again. The problem - since updrading to Mavericks and the Creative Cloud, pdfs in Acrobat are very dull after export from Indesign and it is not a transparency blend or Indesign issue. I understand Adobe blamed Apple for not updating their colour management software and the reply from Adobe was:
"We have found the root cause of this issue and are in process of providing a fix. Once this is done, we will test it to make sure that it works as expected and will release an update patch for all our users."
I am running the latest version or everything but it appears to still be a problem. I have also uninstalled Acobat XI and tried earlier versions without success. I have a print job to send off tomorrow and I am very nervous about how this will print.

Sorry about that, I apparently forgot to attach the file; have done so now.
The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
We cowboy up and seek solutions, eh?

"Viewing PDF After Exporting" is grayed out!

I am using Adobe Design Premium CS5 (specifically Adobe InDesign). When setting up a new PDF preset, I have selected for compatabilty Acrobat 8/9. The problem I am having is that the selection for "View PDF after Exporting" is grayed out. What can I do to get it usable?

Thank you for responding so quickly. The tech team here at school moved all my files and programs to another drive, in the process they lost all my preferences, PDF presets, and more. So I am trying from memory to reconstruct all the tweeking I have done in PHotoshop and InDesign over the last two years - and I am not doing so well. In the past I have had the ability to select "Viewing PDF after Exporting".
As for restoring the preferences - that is out of my league and will have to suggest that to the tech team.

Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?

Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?
When I export a PDF from InDesign CS6 with specific margins, Acrobat does not recognize the Art box. (I have PitStop Pro 11 for page box view)

Thanks Steve,
We are exporting PDF's as you indicate. I see the same thing. The boxes are all the size of the original InDesign document. The PDF art box should be predicated by the margins in InDesign. When we had CS3, this worked great. Now, it seems that there is a disconnect between the two Adobe products honoring the page box size. I have contacted the Adobe techs via chat, and they had no clue what I was referring to. I find it mystifying that Acrobat can not interpret the art box set in InDesign as margins.

"View Pdf After Exporting" Moves Acrobat to Background

Wow, even this forum is buggy. I just lost my entire post because the "server wasn't responding". That'll teach me to copy and paste my post into a text file before hitting the Post Message button.
Here goes again:
I've tried getting an answer for this problem in the InDesign forum with no response after a week.
OSX 10.6.7
Acrobat 9.4.3
InDesign 7.0.3
Conditions:
Step 1) Only InDesign is running. I make a pdf with the "View Pdf After Exporting" box checked. The pdf is created, Acrobat opens and displays my pdf for me as it did in 8 and before.
Step 2) With only InDesign and Acrobat running, I repeat step 1 above, I get the same result EXCEPT that Acrobat immediately pops into the background.
This never happened with any version previous to InDesign CS5 and happened before I installed Acrobat 9, sending Acrobat 8 into the background.
This is a very frustrating bug.

This is the best place to report bugs. They get counted and logged: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

View PDF after export - grayed out

I JUST upgraded from CS3 to CS4 and now this box is grayed out in my PDF export options. So I now have to launch the PDF manually instead of it being automatically launched after being created. Am I doing something wrong, or is this option no longer available?

Well, I guess it was Halloween and some ghosts got into my update because now I am able to choose the "View PDF after Export" option. It was not available when I tried to edit the PDF preset but it's available once I actually use the preset to generate a PDF. Go figure.

How do I link to Anchor Text from browser to PDF file exported from InDesign?

I see that this question was asked previously but not answered:
http://forums.adobe.com/message/3737541
I need a way to link to topics (from an HTML page) within a structured PDF file generated from InDesign, i.e. one that has an interactive bookmarks
panel, that doesn't break the links when the file is updated.
In particular, I don't want to refer to:
* page numbers because the document will repaginate when it is updated, breaking existing links
* named destinations that are numeric as addition/deletion of topics renumbers the named destinations, breaking the links.
Is there any option in InDesign that creates named destinations derived from bookmark titles as that would seem to solve my problem?
I have a similar need, but I have not been able to find an answer anywhere online, even after a several hours of research.
I am on contract with General Electric to develop a UI Style Guide for an international team of developers. My client wants to be able to distribute the Style Guide as a PDF document, but needs to provide links to specific topics when submitting a "Story" in an Agile development environment to the programmers.
Ideally, I would like to be able to create "named destinations" in InDesign such that I can provide the client with a list of URLs similar to this format:
file:\\StyleGuide\Test1-20131024a.pdf\#nameddest=AnchorText-01
However, I can not figure out how to create "named destinations" in the PDF file from the InDesign file in which I have created the Anchor Text in the Hyperlinks tab.
Alternately, the client would be satisfied with the ability to link to specific bookmarks in the exported PDF file that have been derived from the configuration of the Table of Contents styles, but my research has led me to believe that it is not possible to hyperlink from a browser window to a bookmark in a PDF file (only to specific page numbers, search word lists, named destinations, and comments) as described here: http://blogs.adobe.com/tcs/2011/01/tcs-specific/linking-to-a-page-within-a-pdf-and-more.ht ml
Having been using InDesign since 1988, when it was PageMaker, I would prefer to use it to provide GE with the most attractive deliverable, but they are now leaning heavily toward having me licensed with Madcap Flare, which has this capability built in:
http://webhelp.madcapsoftware.com/flare9/Default.htm#Nav_Links/Named_Destinations/Creating _Named_Destinations.htm
Please help me to find a solution that will allow me to continue using InDesign for this project.
Thank you!
Lynne O’Connor
Technical Writer (contractor)
GE Oil & Gas - Measurement & Control

Follow-up post (solution is not available):
I have just completed a phone call with Gaurev Sethi of Adobe escalated technical support in which I shared my screen to explain and demonstrate the desire to link from an external URL to a specific location within a PDF file that has been exported from InDesign. After 40 minutes, during which I was placed on hold a few times while he consulted with his team, it was determined that the desired functionality is not supported in InDesign and has been identified as a limitation of the software.
In researching alternate documentation software that supports PDF export, I discovered that Madcap Software supports this functionality in its Flare product:
http://webhelp.madcapsoftware.com/flare9/Default.htm#Nav_Links/Named_Destinations/Creating _Named_Destinations.htm
Note that linking via URL to a bookmarked location within a PDF is not supported:
http://blogs.adobe.com/tcs/2011/01/tcs-specific/linking-to-a-page-within-a-pdf-and-more.ht ml
More about parameters that can be specified to open PDF files are available here:
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Although the above link is for a previous version of Acrobat, I could find no evidence to the contrary in the current SDK documentation.
-Lynne

Jpegs can't be resized after exporting from InDesign

I am using Indesign CC9.2. A problem has recently developed where I cant resize a jpeg. It doesnt matter file size or settings. I have tried every combination. I export a simple document to jpeg and save to my desktop. I open the file in Preview. I resize it, and an error message states "this change cannot be saved".
This only happens with Jpegs I have exported from Indesign. No problems with jpegs from any other source. Any ideas?

Rob Day schrieb:
Yo can resize and resample
But only with RGB images you are able to save the resized file, not with CMYK.
But the same problem comes with most of free image editors, they don't suppoert CMYK.
Maybe that Kristine should export as RGB, then she will be able to scale it or scale it upon JPG export from InDesign.

Graphic won't show in pdf when exporting from indesign

Hi all,
I'm exporting my document from indesign CS3 to a pdf, there are two graphic layers which do not show up when viewing the document in preview afterwards..it's very strange...does anybody know what this issue/problem could be !?
Cheers,
Colin

Hi Eugene,
The layer is checked to 'print layer'
All my content is on the same layer (it's a CV)
Any other ideas ?
THANKS

Write filename somewhere in a PDF when exporting from InDesign?

Is there a way, when exporting a PDF from InDesign, to somewhere/somehow auto-embed the filename into the resulting PDF? Doesn't need to be "visible" in the job, but needs to be accessible somehow. I'm working with a very difficult client who changes PDF names and then, months later, sends the PDF back with revisions and I have no idea which file the original PDF was created from. I know I can manually enter this information, but I'm looking for a more automated way to do this?
Regards,
Kristin.

Put this script into a folder "Startup Scripts" inside your scripts folder. It auto-updates the document metadata every time you save a document. This automatically is saved in an exported PDF.
//InxAfterSafe.jsx
//An InDesign CS3 JavaScript
#targetengine "session"
//Creates a simple event listener.
main();
function main()
var myEventListener1 = app.addEventListener("afterSave", setMetadata, false);
var myEventListener2 = app.addEventListener("afterSaveAs", setMetadata, false);
function setMetadata()
var myFileName = app.activeDocument.name.replace(/\.indd$/i, "");
app.activeDocument.metadataPreferences.documentTitle = myFileName;
app.activeDocument.metadataPreferences.copyrightNotice = myFileName;
app.activeDocument.metadataPreferences.jobName = myFileName;

No Hyperlink in PDF after export from Crystal Reports 2008 SP2

When I export a report from Crystal Reports 2008 Developer (as well as from the runtime) SP2 to PDF the Hyperlink to a file on hard disk is missing.

Hi,
Go through this LInk
Re: No hyperlinks after exporting to pdf
Regards,
Salah

Getting message while opening PDF file exported from InDesign

Hi,
We have created an interactive PDF in InDesign. In this PDF we have created 15-20 pages which are link together and next previous button is provided.
We are using InDesign CS3 and PDF reader 9. PDF is exported for version 8 onwards. Exported PDF is working properly on our machine but our client is receving the following message on their machine if they try to open this PDF (they have PDF reader 8):
"Please Note: You cannot save a completed copy of this form on your computer. If you would like a copy for your records, Please fill it in and print it"
We have not used any kind of form in my PDF only internal page hyperlinks are given.
Attached screen shot is given for your reference.
Is there as way for remove this message so it doen not appear? I would really appriciate if anybody can help me out.
Thanks a lot in advance.
Regards,
Deepika

Deepika,
The alert dialog your screen shot depicts will only display if there is some kind of form annotation present in a PDF that is not "Reader Enabled".
Look closer at your 'final' PDF.
A PDF, not "Reader Enabled", that contains any form annotations will, when opened by Adobe Reader,
result in the alert dialog that you mention. A "hard wired" default.
Note that the forms document message bar can be "off" by a selection in Adobe Reader / Acrobat Preferences.
Select the 'Forms' category. Select "Always hide forms document message bar".
Be well...

PDF files turns white after exporting from InDesign CS5

Hi all
When I export PDF files fom inDesign CS5 they turn out all white when I open them in Acrobat Reader (I´ve tried both in version 9 and the latest version). When I first open the PDF it seems to be ok but as soon as I zoom out it turns white. Anyone have a clue or have experienced the same issues?
Thanks a lot
/warpig

Is this something you can share? Put the PDF on a server someplace and post a link here, if you can. If you don't have your own server, you can use a service like YouSendIt.com.
What settings are you using for the export? What happens in ID if you go to Preview mode?

Viewing PDF After Exporting from InDesign

Similar Messages

Maybe you are looking for