Viewing pictures in windows ME versus Windows XP

i am using picture function drawpoint.vi to colour a particular x,y co-ordinate. i use it in a loop so that i get a final picture where all x,y co-ordinates are coloured in different colours subject to different conditions.
although i have been able to get results, i have observed a peculiar issue. When this vi is run in windows ME each pixel gets coloured with a small circle of that colour.
On the other hand, using the same vi on a windows xp platform, the pixel gets coloured with a small vertical line of that colour.
why does this happen?
Please help!
Bhaskar

Bhaskar wrote:
i am using picture function drawpoint.vi to colour a particular x,y co-ordinate. i use it in a loop so that i get a final picture where all x,y co-ordinates are coloured in different colours subject to different conditions.
although i have been able to get results, i have observed a peculiar issue. When this vi is run in windows ME each pixel gets coloured with a small circle of that colour.
On the other hand, using the same vi on a windows xp platform, the pixel gets coloured with a small vertical line of that colour.
why does this happen?
Please help!
Bhaskar
I'm not sure I understand your problem. A pixel is a pixel is a pixel, a small dot on the screen really. The only reason I can think why you see what I believe you are trying to explain might be in different resolution or settings of the video card on those two systems and the resulting mismatch of the projected graphic pixels on the CRT dot mask grid. Unlike with LCD screens there is a difference between the screen dot mask and the actually generated video pixels, with the latter being possible to adjust, zoom and scale in any variation, resulting in non-square pixel appearence, especially since the three colors are really displayed seperate from each other too.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

  • I Cannot View Pictures in Windows Photo Gallery Viewer

    When I open Windows Photo Gallery, all my pictures will be shown in the gallery but as soon as i click on a picture to actually view it, a message pops up saying that an error is preventing the Windows Photo Gallery Viewer from starting. If I click on a
    video, however, the video will play; its just the pictures that i cannot view. Do anyone know how to fix this problem or what may have happened to cause this problem? Please Help!

    Can't preview pictures in Windows Photo Gallery in Windows Vista
    Have You tried a System Restore?Select any restore point when there was no such problem.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

    cannot open pictures in Window 8.1...getting message 'the remote procedure call failed".  What is the solution?
    I recently bought a new HP computuer and uploaded Window 8.1.  I then transfered photo files from old computer to new computer using a portable storage drive.
    When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'.  Photos are in jpeg format.
    Please let me know what I can do to view photos?

    What program you use to view these photos? Choose another app to view these photos
     for a test.
    This issue only occurred when you view photo? What is the result if we connect the
    portable storage drive to other computer (if possible)?
    Run sfc/scannow to check and fix if there are some missing or corrupted system files.
    Check the event viewer to see the detailed information of this issue.
    Regards
    Yolanda
    TechNet Community Support

  • One View in multiple Windows

    Hi,
    This is rather a note than a question and written purely in the hope of Google finding it if I (or someone else) ever need it again:
    Situation: (V = view; W = window)
    is displaying a table
    has a view container with embedded in it
    opens as a popup
    contains
    also has a view container with embedded in it
    contains
    --> as a picture: [Link to ImageShack|http://imageshack.us/photo/my-images/684/constellation.png/]
    in words:
    A view showing a table is used in two other views . One of the using views is called in a popup window by the other using view .
    What happens in this situation is a dump with this error message in the browser:
    View Is Already Displayed in Window of Component {..}
    Details:
    As the error message says, may not be displayed by two windows at the same time. One might think that not displaying by making it invisible (either by using a parent container or other suitable element) should solve the problem...
    Let me tell you before: IT DOES NOT!
    Solution:
    To really "hide" you need to display a different view instead of it in its View Container element.
    The easiest way to do this is to add an EmptyView to the ViewContainer in , together with plugs to call the EmptyView and seperately.
    Now you have to fire the plug for the EmptyView just before opening the popup . After closing the popup you have to fire the plug for . -> Voila, the same view is used in both windows!
    Negatives:
    1. Obviously you really cannot show the view in both windows at the same time, but as a popup with more than a yes/no question usually hides most things below it, this should not be the biggest issue.
    2. When firing the plug for the view is built anew, meaning the whole WDDOINIT, ... running. Apart from having impact on your implementation of these methods, this might also be a pain in respect to performance.
    Hope this helps! If anyone has helpful comments or wants to create a picture for the solution, please post!
    Kind Regards
    Robert Schulz

    Finally got it-
    This is a new security feature added in version 9.3.3.
    Currently, when /workspace and /workspace/index.jsp commands are issued, a new instance of EPM Workspace is launched in a separate browser window. With the single instance feature, subsequent invocations of /workspace/ and /workspace/index.jsp opens items in EPM Workspace tabs, even when launched from an external URL. Single instance also prevents extra EPM Workspace windows from closing existing session(s) where multiple EPM Workspace windows were previously allowed.
    URL Parameter to Override Single Instance Behavior:
    By default, there can only be one instance of EPM Workspace on a client machine. However, there are instances where multiple sessions of EPM Workspace must remain open. For example, Financial Management may need to do a side by side comparison of applications. You can override the default setting to allow multiple window names with the URL parameter, multi_process=true appended to the EPM Workspace URL.
    TL;DR Use /workspace/index.jsp?multi_process=true to utilize multiple sessions of Workspace.

  • Can no longer delete pictures in Windows Explorer when connected by USB.

    I have in the past been able to plug in my iPhone 6 and older phones by USB to my Windows 7 machine. Then I can go into the phones image folders and move, copy, or delete pictures. I've noticed now that when I'm "moving" pictures its actually just copying them and not removing them from my device. I like to transfer pictures off for storage. So when I go and try and delete a file after copying it it tells me "You do not have permission to delete this file". I've tried unlocking the phone while doing this as well with no luck.
    So why the change and is there something I can adjust so that I can still delete pictures and videos from the camera roll while viewing them in Windows Explorer?
    I do understand I can go through an delete pics and vids on the phone itself which is simple enough by I like doing it while in Windows Explorer while previewing the files on a larger screen. These are also only images taken by the phones camera not from other apps.
    I'd also like to vent on how Apple has changed the folder structure in their "DCIM" folder. It use to have a few folders to sort through and find pictures but now there are nearly 30 on my phone with some containing only a single image. I'm sure there's a "programming" reasoning to it but really how hard would it be to make these folders simplified? Now I have to go into each folder until I find the images I'm looking for.
    Thanks for any suggestions.

    We are just users like you and don't know why Apple does what it does. This is not a place to "vent," it is a place to ask technical questions. As of now there is no way to change or modify the way these folders appear in Windows Explorer. You can provide feedback to Apple about this issue at this link: http://www.apple.com/feedback

  • FCP 7, viewer and canvas window is dark in lion

    How to fix this problem???

    The image in the Viewer and Canvas windows are 1 to 2 apperture too dark. When I convert a timeline to .mov file into Compressor or Quicktime converter, has the picture (movie) the right exposure ...
    hope my English is understandable...

  • Importing metadata from My Pictures in Windows

    Hi - Some of my jpegs in My Pictures in Windows 8 have data that I would like to have imported into LIghtroom.  In Windows, each jpeg has "Properties", and in the "Properties" dialogue box, there are General, Security & Details tabs.  On the Details tab is an area for Comments.  It is these Comments that I would like to be included when I sync and/or import into Lightroom 5.5.   However, this does not seem to occur.  While viewing the Metadata for a picture in Lightroom (Library module), there is a Comments area, but my screen shows the message "Selected Service Does Not Support Comments". 
    So, my 2 questions are:  Is there a way to include the Comments data that had been entered on the original photo so that the data can be viewed/edited in Lightroom?   What does the message "Selected Service Does Not Support Comments" mean?
    Thank you.
    Donna

    In Windows, each jpeg has "Properties", and in the "Properties" dialogue box, there are General, Security & Details tabs.  On the Details tab is an area for Comments.  It is these Comments that I would like to be included when I sync and/or import into Lightroom 5.5.
    This is a non-industry-standard metadata field introduced by Windows XP, and most other software (including LR) ignores it.   If you'd like to import that field into LR, you could use Exiftool (free) to copy (or append) that field into the field that LR will read as its caption (XMP:Description).  Exiftool has the ability to process many photos all at once and make backups of the originals. 
    While viewing the Metadata for a picture in Lightroom (Library module), there is a Comments area, but my screen shows the message "Selected Service Does Not Support Comments".
    LR has the ability to publish collections of pics to services like Flickr or Facebook and sync those collections with the services.  If, for example, a Flickr user adds a comment at Flickr.com to a pic that's being synced with a LR published collection, LR will download the comment and show it in the Comments area.  This feature has very limited usefulness, since you can't copy text from the Comments field (!) and you can't search the field, or even search for photos that have comments.

  • In the "View"-- "Page Source" window: why can't I select a portion of a URL like I used to in previous versions? If I try, the source text behaves as an active hyperlink instead. This makes copying and editing HTML a pain!

    In want to copy a portion of a URL from the "View" --> "Page Source" window and paste it in my favorite text editor. This used to be a simple action with my mouse (mark portion with left mouse button, dump copy into editor window with middle mouse button). In Firefox 3.6.9, it is not plain text in the "Page Source" window but active hyperlinks (cursor shape changes) and takes me to the website of that URL, which I don't want. How can I get the original behavior (plain text page source) back?

    The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
    If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

  • My laptop is no longer reliable. I want to share my iTunes account with my new iPad 3.   I just started viewing my iPad window on my 50 inch Panasonic wirelessly via Apple Tv 2.  That amazing.    I would like to access my iTunes store via iPad for podcast

    My laptop is no longer reliable. I want to share my iTunes account with my new iPad 3.   I just started viewing my iPad window on my 50 inch Panasonic wirelessly via Apple Tv 2.  That's amazing.
    Now I want to share my iTunes account with my Apple TV  1, and my iPad 3, without the need of booting up the unreliable laptop where I set it up last year.   do I have to use my. Pc laptop to access the iTunes store again too authorize home sharing.   I have tried it before. O for a while I thought the we're sharing, now the Apple Tv has gone back to telling me to use my computer too sign into iTunes.     
    there maybe a far simpler way to enjoy iTunes on my iPad and Apple Tv.   I also have the Sony blurry Google Tv.  I will upgrade my PC with Windows Z8 and a screaming ran cache, ram disk on a 79 mother board and then pay 5 bucks a month for OnLive Plus that I hpe to show wirelesslypy on the big scree 50 inch Panasonic.   I have waited for years to upgrade as I wanted to help my kids in college.  They are finished and so I have money fr my self.CELEBRATE

    Are you using the charger and cable that came with the phone?
    Are you using an unauthorized third party charger?

  • How can i navigate via navigational link between views in different windows

    hello
    i am using CRM_UI and have opened a popup
    gv_transcr_popup is a attribute referrring to if_bsp_wd_popup in my implementation class
    gv_transcr_popup = comp_controller->window_manager->create_popup(
        iv_interface_view_name = 'AIC_CM_TRANS/AssignTranspReq' "#EC NOTEXT
        iv_usage_name          = 'CUBAssignTransporReq'         "#EC NOTEXT
        iv_title               = lv_title ).
    get instance of BOL dynamic query
      lo_qs = cl_crm_bol_dquery_service=>get_instance( 'BTQAIC_CM_TRANSPORTREQ').
      gv_transcr_popup->set_on_close_event( iv_view = me iv_event_name = 'AssignTranspReq' ).
      gv_transcr_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
      gv_transcr_popup->open(   ).
    through the iv_usage_name i will open in this popup a search view from another window
    in this window is a searchview implemented and now after selecting the line in the result view in want to navigate through outbound plug / inbound plug to the starting view .
    but i get the exception
    Target view AIC_CM_TRANS/TransportReq of the navigation is not assigned to the current window AIC_CM_TRANS/AssignTranspReq ( which is true)
    now the question: how can i navigate between views of different windows?
    Best Regards
    britta

    hi
    i have found a way : you have to use a outboungplug from the windows interface ..then it is working
    best regards
    britta

  • My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

    My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert

  • Icon view in Finder windows do not autowrap

    I am using 10.5.1 on a 17" MBP 2.16 ghz.
    Since installing Leopard, Icon view in Finder windows do not autowrap and Finder windows do not always remember their display preferences.
    The Trash auto-wraps (the icons spread to take up the entire window if it is enlarged) But Opening a Folder in my default list view and switching to Icon view and then enarging the window only shows icons in the original window width. EG, If it were 3 colums of icons, it stays 3 columns of icons unless I use Clean Up TWICE and then I get 10 columns of icons which will wrap.
    Is this a Leopard BUG or a local problem. Any suggestions on fixing it?
    TIA,
    Bill

    Yeh - though I use cmd-J which I have used since it appeared, 10.1?
    But I just solved my problem. In my use as defaults selection, I had Snap to Grid selected in the arrange by pop-up rather than by Name.
    Selecting Name and clicking on Use as Defaults makes things work as expected.
    Thanks for making me look closely!
    Cheers,
    Bill

  • Can't Change Lock Screen Background Image and User Account Picture in Windows 8.1.

    I am running Windows8.1 Single Language with windows activated. Upgraded from Window 8 to Windows 8.1.
    Lenovo Y410p.
    4th generation Intel® Core™ i7-4700MQ (2.40GHz 1600MHz 6MB) with 16GB RAM.
    NVIDIA® GeForce® GT750M 2GB .
    I tried all methods that I found on web included :
    1. http://www.askvg.com/fix-cant-change-lock-screen-background-and-user-account-picture-in-windows-8/
    2. http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/lockscreen-issues-on-windows-81/c51f570a-7a69-4e92-8348-3ebbed778592
    3. I deleted the C:\ProgramData\Microsoft\Windows\SystemData file and folder
    4. I restored the Libraries Features.
    5. I run SFC / Scannow 3 times but get no error.
    6.  I created a new local account but the same problem shows up. (I'm using live for main account.)
    Now, Please tell me what should I do, Thanks.

    Hi,
    First of all, please run the command slmgr.vbs /dlv
    After that, check the License status if it is licensed.
    Is there any error message when you couldn't change lock background or this option just grey out?
    Roger Lu
    TechNet Community Support

  • Not able to change account picture and lock screen picture in windows 8.1

    i can't change my account picture and lock screen picture because i cant browse it when i click the browse button nothing happens it just blink that's all.. please help me....

    Hi,
    You can try the fix it here:
    [Fix] Can’t Change Lock Screen Background Image and User Account Picture in Windows 8
    http://www.askvg.com/fix-cant-change-lock-screen-background-and-user-account-picture-in-windows-8/
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
    Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
    completely understand the risk before retrieving any software from the Internet.
    Hope this could be helpful.
    Kate Li
    TechNet Community Support

  • Best format for viewing movie on Windows ?

    Hi,
    I use a Mac, but need to make compressed movies for someone to download and view on a Windows PC. They are accessing the movies from various internet cafes, and the computers dont always have QuikTime installed. What is the best format to save my movie in to allow them to view it without needing to download additional software?
    Thanks....

    mpeg1

Maybe you are looking for