Viewing plugin automation data

Hi Guys,
I'm using a plugin minimoog as my instrument, and am recording some cutoff frequency sweeps etc. They are recording fine, but I want to go back and edit it manually.
The automation data is appearing as grey bars within the midi region.. but I cant access the data to manipulate it in the hyper view editor, or nothing is appearing in the track automation data either..
any ideas?
thanks,
mike.

Sounds like you're using midi data (which is fine)-select the region and open the event editor it will tell you all events and what exactly their CC#s are-HyEd should then be specified to that CC.

Similar Messages

Can't get automation data from RMX into Logic

I'm usinga tutorial that shows a simple way to use the RMX interfaceto write automation data to the master channel using RMX as a multitimbral instrument. It shows that you simply put the track in touch mode, engage play, and then move things on the RMX mixer. I can't get it to work this way. What am I forgetting?

Funny this is coming up, I'm doing this right now.
Try this:
Instantiate a mulit RMX on instrument 1. Create a multi instrument object in the environment. Don't cable it to RMX yet.
Create a transformer object. Double click the transformer. Okay here we go, follow close:
Under "Conditions" enter
Status = Control
Channel All
-1- = 7
-2- All
Under "Operations" enter
Fix Fader
Fix 2
Scale 1.0000 2
Thru
Now you'll see three black vertical lines in the middle. Click the middle line twice. This will cause you to have:
1st line: Vertical
2nd line: Starts at top of first line and goes diagnally down
3rd line: Vertical
That's if you want the Logic volume sliders to control the RMX volume sliders in RMX's mixer page. You have to cable it with the multi instrument to make it work...that's down below. Don't check "Filter Duplicate Events".
Here's the way to change the pan:
New transformer:
Under "Conditions":
Status = Control
Channel All
-1- = 10
-2- = All
Under "Operations":
Fix Fader
Fix 2
Scale 1.0000 10
Thru
Now Logics pan pot on the RMX multi controls the pan on the RMX Mixer page.
Now cable the multi-instrument object you created the first transformer, and then that transformer to the next, and then that transformer to instrument one. You're set!
Ok, now why does this work? I mostly understand it...
On Instrument 2, put a multi RMX plugin on. Now in the environment, create a monitor object. Cable Instrument 1 to the monitor object (don't cable the monitor object to Instrument 1, won't work).
Now with the environment page and monitor object still in view, open the plugin RMX on Instrument 2. Go to the mixer page. Move the volume slider for multi 1. You'll see some data show up in the monitor. Here's what it means (sort of):
You'll see something like:
2 2 92
2 2 91
I'll start by saying that the last number is just the volume value. Move the fader and it changes accordingly. So this number isn't important for this example.
The first number, 2, is related to RMX as an instrument. That's the 2 in:
"Operations"
Fix Fader
Fix 2 <---------
The next number is associated with multi one's volume slider in RMX. That's it's number. If you move multi 2's volume fader, you'll see:
2 3 91
2 3 95
And for multi 3's volume fader in RMX:
2 4 91
2 4 92
So that's why we get this:
"Operations"
Scale 1.0000 <----- because we're moving in incriments of 1, RMX Multi 1 had 2 as a second number in the monitor, RMX Multi 2 had 3 as a second number in the monitor, RMX Multi 3 had 4 as it's second number in the monitor
and then:
"Operations"
Scale 1.0000 2 <-------because the first fader, multi 1, STARTS on 2.
Okay, so that's what the monitor tells us. You can delete that monitor object now, or keep it there if you want to control other RMX values with Transformers.
So now the other parts....here's where I'm guessing, anyone can chime in here and correct me...
Under "Conditions"
Status = Control <-----because you're going to control the desired RMX fader/pot with your input of a continuous controller #.
Under "Conditions"
Channel All <---don't know why, but it is.
Under "Conditions"
-1- = 7 <------- That "7" is the continuous controller number of the volume sliders on the multi instrument channels in Logic. Here are other useful ones I've found in creating the mega autoload:
10 = pan knob on Logic multi inst
91 = reverb knob on Logic multi inst (i use this to control the amount of Aux 1 FX on any given RMX mutli. As a side note, RMX Aux 1 is:
"Operations"
Scale 5.0000 35
And then the subsequent Aux 2 is 36, Aux 3 is 37, and so on)
93 = chorus knob on Logic multi inst (I use this for Aux 2 FX)
74 = Frequency knob on Logic multi inst (i use this for Aux 3 FX, although you have to slam it to the left for 0, because it defaults in the center like a pan pot).
As for this:
"Conditions"
-2- All <------
And this:
"Operations
Thru <--------which is right below the -2- All
I think because we're not using those to change and "Transform" values, you just leave them the way they are.
Hope this helps! I'm sure more can be added by the genius dudes who roam these parts...
Tyler

View my iCal data from Outlook

I'm currently using iCal to manage my schedule. It syncs automatically to MobileMe, Google Apps, and Plaxo, and it all gets pushed to my iPhone via MobileMe. I also have a few ics subscriptions within iCal, but for the purposes of what I'm about to ask, I don't care about them. It's my OWN calendar data that I care about.
I need to access it from within Outlook 2007 on a government-issued computer. Because it's government-issued, it's a fixed image and no one can install software or plugins locally. So with what I have (Outlook only), I need to figure out how to be able to view my iCal data.
I know Outlook 2007 supports subscriptions, but for the life of me, I can't find anywhere within me.com, or iCal, any reference to what URL I would need to use to have Outlook access my calendar.
Any guidance?
Dan

Hi dantrimble.
I have same problem that you. I have Snow Leopard and I need to sync 4 windows with this calendar server, and i don't find any form to solutions it.
If you're found any solution ?
I try with sundird but icann't.
any idea ?
Thanks.

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

Acrobat Pdf viewer Plugin Doesn't work Mozilla Products

Mountain Lion (OSX.8.2)
500 GB Hard Drive rought 200 GB left empty
Intel i7 2.8 GHZ Processor
8 GB System RAM.
In Acrobat and Reader XI (and X as well) the PDF viewer Plugin does not work. In fact it doesn't does not even show up in the Addons > Plugins.
There are three, only one appears:
The Adobe PDFViewerNPAPI.plugin only shows up.
When I try to open a PDF in any Browser that use Mozilla's Gecko engine. Just see a Bright white Screen.
I don't use Chrome or Safari on Principle. But have tested and works fine.
Other Browsers that use webkit works just fine.
Since posting this to Plugins which no one has even read. (group appears non functioning) I decided to post here.
Just to make make sure another Plugin is not interfering I removed all my Plugins and just installed the the three Plugins above. Same issue. According to addons > Plugins
only the NPAPI plugin exist.
I've posted a Bug report once again Like I have been doing on this problem since the switch from OSX.1 on Up for acrobat/Reader every new version that comes out.
Maybe someone that knows what the problem is can let me know what to fix.

Where are they advertising it? Perhaps there's more up to date information but I look in
http://www.adobe.com/products/reader/tech-specs.html - maybe the problem is that I'm looking at Reader, not Acrobat?
Adobe Reader XI / Tech specs
Mac OS
Intel® processor
Mac OS X v10.6.4, v10.7.2, or v10.8
1GB of RAM
350MB of available hard-disk space
1024x768 screen resolution
Safari 5.1 for Mac OS X v10.6.8 or v10.7.2; Safari 5.2 for Mac OS X v10.8; Safari 6.0 for Mac OS X v10.7.4 or v10.8

Automation data copied to another track?

I like the way I automated a track, and want to used that exact "volume" automation on the next track below in my arrange menu. Is there a way to copy/paste kind of process here to recreate this on another track?

Prior to Logic 7, Logic included an Automation Folder. This was basically an arrange page, that had all the automation in your song viewed as if they were audio or MIDI regions. You could easily option/drag automation from one track to another this way.
There is a way to it in version 7... read about it here:
http://community.sonikmatter.com/forums/lofiversion/index.php/t21249.html
I have my automation folder available as a screenset.
Once set up, this is probably the quickest way to achieve what you're wanting. However, I have also used the method mentioned above, where you drag the region, and Logic asks if you want to copy it (as long as you have "Ask" selected in your Track Automation Preferences).
Then just delete the copied region, and tell Logic not to delete the automation data.
Do look into the automation folder though. It allows you to move and copy automation data, just like you do audio and MIDI regions.

View Track Automation

Hello,
I recently upgraded to Logic Pro from Logic Express.
In Logic Express "v" was the default key command for "View Track Automation." By default in Logic Pro, it is not. I changed the key command for "View Track Automation" in Logic Pro to "v," however, when I press "v," I only see the track automation on my audio channels load, and not my instrument (MIDI channels). In Logic Express both were displayed simultaneously.
How can I fix this?
Thanks you,
Connor

Is there a way I can disable track automation and then re-enable it?
You can delete all track automation from all tracks, or just some tracks. You can also turn it off, and then back on again, but I don't think that will help in your case, but try it.
If I were to copy the regions to a new file it would take a long time to reload and configure all the instruments (I used sample library plug ins).
It's not that bad - I've had to do this many times.
First, on all your more complicated tracks, use "save channel strip settings" on the individual tracks. Also, use "save settings as" on individual plugins if you need to.
Then relaunch Logic, without core audio (control key - open Logic) and create a brand new template. Add the global settings. Open your existing song, and first drag all the audio files over to the new arrangement, then the instrument tracks. Now go through and choose your previous channel strip, instrument and plugin settings.
A little bit more tweaking, and you're done. I'd suggest saving it as a completely different project folder, choosing the option of copying everything from the old folder to the new.
I hope this helps a little - good luck.

Edit Automation data

Greetings Logic-o-philes,
Is there a way to move track automation data; volume for instance, created on several tracks, all at once?
Thank you,
Boe

Boe Brown wrote:
Is there a way to move track automation data; volume for instance, created on several tracks, all at once?
What you want to do is access Logic's Automation folder. For some typically stupid Apple reasoning, easy access to this folder was eliminated in version 7. But you can still get to it...
Open the Automation Event list. This is only accessable via a key command, so you may need to create one. Open your key commands window, and in the search field, type in "automation".
Find "Automation Event Edit", and assign a key command to it.
Once you open the Automation Event Edit list (via your new key command). With the Event list open, go up to the windows menu and open "Arrange".
A new Arrange page will open, but on this arrange page, you are looking at all your automation data, in the form of regions, just like you see with MIDI and audio regions, on the main arrange page.
Within this Automation arrange page, you can cut, move, drag, etc... automation data, just like you do with audio nad MIDI regions.
So if you need to copy, say, volume automation on tracks 6 , 7 and 8, from bars 1 through 16, to bars 30 through 46, simply select the automation regions on those tracks, and option/drag them to the proper location.
Tip... merge the automation regions per track, once they are copied.
You may also need to disable automation view, and then re-enable it, when you go back to your main arrange page, to visabliy see the changes.
Tip #2.... save this automation arrange page as a screenset. So from this day on, when you want to copy/move automation, you're a screenset away from it.

Can not view 24 hours data in Websphere performance page

We configured EM 10.2.0.5 to monitor Websphere 6.1 on AIX.
Now we can see current data in the performance page.
But when we switch to 24 hours view, there is not any data shown in the page.
Does EM 10.2.0.5 support viewing Websphere historical data?

This issue is solved.
The OMR parameter job_queue_processes is set to 0.
It should be 10 or above.

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

Automation Data in Logic 8

Hi,
I apologise if this answer has been given ad nauseum ad infinitum in advance, but I am wondering how do I copy automation data along with a section of audio/midi? Moving it is easy enough but copying that data and pasting it at a particular point isn't as intuitive for some wierd reason. Once again, sorry.

If you option+drag a region Logic will ask you wether you want to copy the automation or not, if you want that. In the Preferences->Automation at the top you have three options: Always/Never/Ask

Hi! How do I switch existing automation data for one parameter to another?

Hello! I am new to Logic 8, and actually to using the Logic automation feature. Here is the deal: I have some old-school Logic event data that I recorded as a kind of automation (before the current kind of dedicated automation) for an EXS24 parameter. I need to change this event 'automation' to actual Logic automation, as Logic 8 does not read it (as Logic 7 did before it). So, I highlighted all of the events in my old-school 'automation' region in the event list. I had to change the number value to a common number assignment so that I could Change Selected Event Data into Track Automation. I selected volume (number seven, I believe), and than highlighted all events, clicked on the event region, than went to options and selected my desired automation transformation destination (say that three times fast). Great! I have my region as automation! Logic 8 knows what to do with this! But, it is volume. I need it to control the LFO 2 Rate of the EXS24. Problem is, that when I switch the automation parameter from Volume to LFO 2 Rate, the automation disappears. It seems as though that automation data is only for Volume. So, how might a charming gentleman, such as myself, go about keeping/converting the same automation, but for the parameter I want to change it to?
Thanks! =)

Hold "command" when switching between automation parameters.
Then you will get a dialog offering you the option to convert the existing parameter's data into the destination parameter, or "copy and convert" (which does the same but leaves the existing volume automation data intact.)

Possible to do plugin automation with BCF2000? or can I Draw it?

Hi, I get a BCF2000. It works in Logic Control emulation with STP now, but I don't know how to use it to control STP's plugin automation curve. Anyone knows it?
If not possible, can i just use mouse to drag an automation curve - not by dragging breakpoint to breakpoint one, but just like drawing with a pen tool?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

How to view the key mapping when viewing Hierarchy in Data Manager

Hi! I previously posted a question on doing value mapping using the hierarchy code rather than the name. I have got that working now using concept of remote key. When I first loaded the hierarchy with remote key and check in Data Manager, I can see the hierarchy structure with the key mappings. However, when I subsequently went back to the hierarchy to have a second look, the keys are gone. Does anyone know how I can view hierarchy in Data Manager with the key mappings?
Cheers!
SF

Hi,
Go to Record mode, and open Hierarchy table. Now to select click on any hierarchy node record and then right click and select "Edit Key Mappings". This will show you existing keys as well as allow you to manually modify keys. You can only Check Remote keys on hierarchy in Record mode and in Hierarchy Mode "Edit Key Mappings" option will be disabled.
Please revert if you face any issue.
Regards,
Shiv

How can i view my iphone contents on PC. How can i view my backup data in itunes. How can i see my SMS and contact on PC

Hi,
Can anybody help me out on the follwoing questions
how can i view my iphone contents on PC. How can i view my backup data in itunes. How can i see my SMS and contact on PC

The data isn't actually stored in iTunes. iTunes is like a card catalog that allows you to access information from the various places that it's stored on the computer. SMS and contact info will be viewable in whatever program you sync contact information. The backup actually keeps the files, but doesn't make them viewable, I'm pretty sure. You can only see the info you've actually synced.

Viewing plugin automation data

Similar Messages

Maybe you are looking for