Viewing size changes from FCP to QT

I cant find how to view in its original 4:3 size a FCP movie that i already compressed into .mov (H.264) file. QuickTime squeezes the image a little from up and down.
I have tried with other movies and its the same. I havent had this issue with the early version. Hope its easy to correct.
Thank you.

pixel aspect ratio

Similar Messages

Paper size changing from letter to A4

I have been trying to print PDF files that were created as A4 size documents in our office in Italy. When I go to print with the paper size set to Letter the printer says Please insert A4 size paper into manual feed tray. I have letter size in tray 2 and when I insert the letter size into the manual feed tray it prints fine. The printer is a HP LaserJet 4050. I am using Adobe 9. The strange part is everyone but myself and one other person, is printing fine to the same printer and the same PDF files. I have tried reinstalling the printer and Acrobat but same issues. Has anyone ever seen this or have any ideas why it would switch size even though I select Letter? I tried installing a different PDF viewer and it prints fine so is there a setting in Acrobat for this issue? I really need to be able to print these PDF's without having to run to the printer and feed paper in each time.
Matthew

Hi, Thanks for the hint regarding the profile - I just updated...and for responding!
The System Preference for printing is set to A4, really that is not the issue, it is rather just one of the examples of the settings in the Address Book print window that are lost after printing.
*Every time* I open the print dialog for printing of a contact the default setting is for US Letter, if I click on any additional fields to print (such as url, company etc), or change the font size from "Regular" to "Large"; the next time I want to print another card those settings are lost. As mentioned, I tried to save those settings in "Presets" under "save as", but upon reopening the print dialog and selecting the newly saved Preset all setting have reverted back to the defaults (US Letter, regular font size, no selection of my preference for printing the notes and company name etc).

What is the best seeting to export as smaller file size AVI from FCP?

Hi, I know the topic sounds very similar to many of AVI post it had been up, however, somehow, I do not find the right answer that I'm looking for.
I have a couple animation created from QT as "image sequence".
I simply want to export as avi file.
Here is the question I have.
1. If I choose DV/DVCPRO-NTSC, and choose scan mode as Progressive, I get interlacing looking quality video.
2. If I choose compressor type as "NONE" then even I set as "least" quality, the file size will be over 1G..although, that's the quality I'm trying to archive.
Is there any other setting I can choose to get good quality with lower file size avi? I have seen or download avi file on the net with very good quality and still download-able file size...

What is the QT method? (Export from QT Player?)
Yes, 10 hour plus is ridiculous. I'm guessing that there was either something wrong with your Internet connection and/or at the You Tube end of the uploasd/compression process.
Innocentius and Hugh are right; using Compressor (or MPEG Streamclip) and using YT's uploader is the most reliable workflow.(Since Google changed the account verification process, there have been reports of upload problems using Share>You Tube.) In addition, you have more control over the quality of your movie. You can create multiple custom settings in Compressor and then Share > Compressor custom settings. It will go faster if you export out of FCP as a Pro Res 422 file; should take 3-4 minutes top. The Web encode for a 3 minute video in Compressor might take 15 minutes, depending on your system. MPEG Streamclip is probably a little faster.
Russ

Unable to click on file in list view to open from fcp. Works from icon view, however.

I have intermittant issues importing files and folders into Final Cut Pro. When the window to select the file or folder I want pops up, I often don't have the ability to select an item when the window is in list view, but when I switch to icon view, the open button loses its greyed out appearance and I'm able to select a file or folder.
I'm running FCP 7.0.3 and OS 10.5.8. At first thinking this could be an OS issue, I tried attaching a file to an email within Chrome and didn't have a problem selecting and opening files from a list window.
I trashed my FCP preferences and user data info, hoping this would resolve the issue, but it hasn't. Thoughts?
Thanks in advance for any advice you can offer.

Thanks, Luis. I had selected FCP 7 in the drop down. Not sure how it got moved to X. And don't see an edit option on my original post.

This is about the still image size changing from what I see on the computer monitor and what the burned DVD shows on the TV

I have Prem.El 12 and have used PE4 for years. I have a new PC that runs Win7Pro. The still images on the computer monitor are within the "safe margins". The still images after the movie has been burned to a disk are MUCH smaller on the TV screen. Is this an issue of 16:9 vs 4:3 ratios? My TV is 4:3. Can I tell PE12 to make the movie a 4:3?

retchemteach
Although I have seen your post of today in my Inbox Email Notifications, that post has not yet appears in this thread. It will probably will sooner or later. But, to keep things moving along....this is a copy of what I am seeing as your message of today in my Indox Email Notifications
Thank you for your patience in the time it is taking me to get back to you.
I am still trying to buy some DVD-RW discs and will hopefully do that in a
bit. Meanwhile, I have more info for you and some simple (I hope)
questions. If you want to insert your answers, that would be fine.
My camera (for stills and video) is set to the 4:3 ratio. It is capable of
being set to a 16:9 ratio if I wanted to do that. I looked in its TOOLS
menu and saw this info.
My TV is definitely a 4:3 TV. (I measured it with my tape measure and
divided W/L to get 1.33) The TV can show a 16:9 movie and just adds the
black bars on the top and bottom. Question: What will my old 4:3 movies
look like on a 16:9 TV whenever we buy one of those?
It seems to me that I want to set PE12 to the NTSC DV Standard you
mentioned.
I do NOT know how to “size your photos so that each has a 4:3 aspect”,
unless you mean doing that in Photoshop Elements, which I know how to do
(*see below)
I had NOT considered that I would need to watch the preset for the
‘Publish+Share’ step; so that’s good to know (I copied and pasted your info
for later use).
BTW, years ago when I had difficulties with my XP computer working on PE4
(had only 2 GB RAM), an Adobe tech told me to resize my photos * to have a
720 pixel width (the height would be automatically adjusted) to lower the
file size to something my computer could handle without crashing. (That
was back in the good ol’ days when Adobe support would actually talk with
their customers and try to help them in the first month)
My new computer has 16GB RAM. Do you think I still need to reduce file
size? One does lose some sharpness in the resizing process…..however,
these videos I’m making are travelogues and are for a fun way to view pics
and videos of a trip…nothing Earth shattering….and just a hobby to keep me
off the streets.
I truly appreciate the time you take to help me (and others). I was even
tempted to try to install my old PE4 on my new computer just to be able to
enjoy my hobby again.
My reply to the above....
1. If you camera is giving you 4:3 photos and your Premiere Elements 12/12.1 is running on Windows 7, 8, or 8.1 64 bit, then leave
the photos as is unless you have a lot of photos and each has pixel dimensions sizes way over 1920 x 1080 pixels that are giving your computer resource issues. If you have to down size them because of computer resources, then copy the photos to a computer desktop folder and also create an empty folder on the computer desktop.
a. Photoshop Elements Editor, File Menu/Process Multiple Files.
Process Files form Folder
Source - browse to and select the computer desktop folder with photos to be resized
Destination - browse to and select the empty computer desktop folder
Image Size
             Check Mark Next To Resize Images
            (no check mark next to Constrain Proportions)
            Type in Width = 1000 (set units for pixels)
            Type in Height = 750 (set unites for pixels)
File Size
           Check Mark Next to Convert Files To
           Set for JPEG High Quality
The above should work fine for a NTSC DV Standard project with a burn to DVD disc with preset NTSC_Dolby DVD (4:3 video).
2. With regard to the TV Set and 16:9 video....when you have the DVD-player attached to the TV, do you have the opportunity to bring up a display of menus with
controls for Picture and Aspect Ratio? From what you have written so far, it looks like the answer is no. I am not sure how your TV DVD
player will handle 16:9.
Best do a mini test run
1. Project preset set manually to NTSC DV Widescreen (please refer to post 1 link)
A few photos sized for 1600 x 1200
In the Premiere Elements project, use the Safety Margins inner rectangle for text placement
Publish+Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
See what that looks like on your TV DVD player.
If you discovered that your current TV DVD player can be set for a 16:9 display, then I have a preferred workflow for
NTSC DV Widescreen which typically gives best possible results. Hints of things to come.
Please review and consider. Thanks for the follow ups.
ATR

HTML Report Viewer width changes from percent to pixel after postback

Post Author: MikeDymond
CA Forum: General
Because of the page layout that the report needs to fit into I need to have the ReportViewer width set to 100% (that is 100% of a table cell, embedded within a complex web page). When you first view the page it looks fine, the ReportViewer is correctly set to 100% and fill the space it should. When you then hit the next page button it causes the page to refresh but this time the ReportViewer width is not set correctly. Looking at the code I can see that the relevant line in the HTML is: <div id="cridcontainerCrystalReportsViewer" style="width: 100%; height: 712px; position:relative">and is correct when you first load the page. However after the Postback it is changed to: <div id="cridcontainerCrystalReportsViewer" style="width: 100px; height: 408px; position:relative">and hence the page does not display as it should.Even if I force that value to be set in code every time the page is shown it still does not work if it is set to a percentage. If I force it to be set to 500 pixels it works as expected and the viewer is set to 500 pixels wide both before and after the postback. <div id="cridcontainerCrystalReportsViewer" style="width: 500px; height: 408px; position:relative"> However that is not what I need to make the page look as it should. Anyone got any ideas? Is this a bug in the Viewer?Cheers Mike

You talking here only about textboxes, what about the other controls in your form(dropdownlists, checboxes....)? How you will be validating the data on these forms? What if you want to implement server side functionality behind?. I'm asking these question
just to see if you planned well for your idea. I guess you're going into this because you want to runaway of generating many forms via asp.net, is this correct?.
Another options can be:
Create forms that are generated on runtime based on your datasource, I've done this before but there was a specific DB design for that. Here you can read your DB and based on you can create the different types of asp.net controls, in addition to calling
sever side controls and validation.
The second option is to have a look at the InfoPath product, its mainly used for Sharepoint but not sure for asp.net.
Fouad Roumieh

Font size change from 3.5 to 7.0 in web reports

We have an issue where our font sizes all seem to be smaller in the 7.0 environment vs. the 3.5 environment. Has anyone else had this issue? I cannot seem to find a note pertaining to this. Is there a global setting that can be changed for this? We have not migrated out templates. We are just using the 3.x runtime in a 7.0 environment.

Brent,
Check your stylesheets - see if they are the same across 3.x and 7.0
Arun

Color changes from FCP to Quicktime to Youtube

I'm editing on FCP7 and I add color correction but then the color changes once I export to quicktime conversion. And then it changes again when I upload it to youtube.
I'm editing on Apple ProRes 422 1920 x 1080. I export with quicktime conversion to h264 same dimensions. Please help me out thanks!

The color will change. This is due to many factors, like the Canvas in FCP not being color accurate, so it won't match a QT file that you export if you do it with the same settings as the sequence. But it REALLY won't match if you compress it in any way, as compression means information is removed to make the file smaller. Color information.
Here...look at my second to last post on this thread for a reason for all of this:
https://discussions.apple.com/thread/4903886?tstart=0

Rectangle size changes from what I typed?

I'm using Illustrator CS 5 on snow leopard, when I make a new path with the rectangle tool, choosing a size in the dialogue window, say 10"x10" when i look at the rectangles size in the transform window along the top of the screen it says my rectangle is 10.0139" x 10.0139", now if I type 10 by 10 into the field again it stays 10 x 10. Why does it do this and how can I fix this?
Thanks
Marcus

Merrill,
To me it looks like Edit>Preferences>General>Use Preview Bounds being ticked.
A integer inch rectangle is an integer pixel rectangle so there should be nothing to change.

Is there a perminent fix for type size changes from page to page. Type is sometime to small to read.

This problem does not exist in Internet Explorer or in Chrome, so the problem appears to be in Firefox. I see work a rounds in these forums, but nothing that corrects the problem that seems to exist in Firefox. This problem started with one of the Firefox upgrades. Is there a permanent fix in our future.

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Windows size change from pc to pc

i created this jframe with a jpanel inside and some buttons and textfields on my 17 inch laptop
when i put on another laptop of 15 inch size some of the butons couldnt be seen because they were out of the screen
the jframe size is correct ( i used code to get screen dimensions and create jframe accordingly ) but the buttons inside were not skuished to fit properly
how can i make the inside buttons and textbox work on all pcs
plz help

>
i created this jframe with a jpanel inside and some buttons and textfields on my 17 inch laptop>Do you mean JFrame and JPanel? I am unfamiliar with the other two and unable to help.
>
when i put on another laptop of 15 inch size some of the butons couldnt be seen because they were out of the screen
the jframe size is correct ( i used code to get screen dimensions and create jframe accordingly )...>Full-screen does not necessarily equal correct, when it comes to frame sizes.
>
.. but the buttons inside were not skuished to fit properly
how can i make the inside buttons and textbox work on all pcs >What layouts is the code you did not show us, using? As an aside, not all PCs have Java, so it will never work on 'all PCs'.
>
plz help>Please type words fully. This is not SMS.

View Footage from FCP to Sony HDR-HC7 Camera

Hi all,
I have final cut pro and a Sony HDR-HC7 camera with a SAMSUNG external monitor. I'm trying to view edited video from FCP to my camera then through HDMI to my SAMSUNG external monitor. I can't get this to work.
This works fine through my DVDPRO deck then component to SAMSUNG external monitor.
Any ideas? Thanks in advance.
mdawg

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

Slide size change when clicking on pdf links (Acrobat 9 pro)

Hello,
I have a problem with an interface mock up I have to deliver to a client.
The size of image is changing from a slide to another.
For example, when I click on a home button (this button is a link made in acrobat pro, that send to another page of the pdf document), the slide size changes from full screen to a smaller size with a black border around.
SOrry it's hard to explain, so I put 2 screenshots and hope it will be clear enough >
This happen only if I use clicks on the links.
If I just use the next / previous command (for example if I use keyboard's arrows), the size remain full screen and unchanged for the whole slides.
Can you tell me how to fix this problem?
Best regards,
Mega

Something to try.
Using the link tool select the link.
View the link's properties.
Select the Actions tab.
Select the show action then click the Edit button.
Observe what is displayed.
You'll note that you can configure the value for "zoom".
Be well...

After copying a file from NTFS to HFS volume, file size changed when viewing in Windows

Hi guys,
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, I have to adopt a "stupid" way: in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
How could this happen?

I am not sure if this is what your seeing but...
The same unaltered file on two different volumes might use different amounts of disk space. This is because a 'disk' is divided in to 'blocks' and a block (also historically known as a 'sector') is a certain minimum size. So if disk-1 has a block size of 512 bytes and disk-2 has a block size of 1024 bytes then a file containing just 10 bytes will use up twice as much space on disk-2 as disk-1 even though it is the exact same file.
Beyond that, Macs can add additional information like Spotlight tags, labels, icons, etc. which make a file bigger. If you are modifying a file then presumably that also implies adding additional content e.g. for a Word document more text and this will make it bigger. Also depending on some programs are configured or designed 'deleting' text may only mark it as deleted and not really delete. This can apply to older versions of Word which has a 'Fast Save' feature, new versions have removed this and do a proper delete.
You would have to give more details like what you are doing to the document, what kind of document, and what the two sizes are.
Finally, there is one other potential difference, some systems and manufacturers use 1024 as a unit for measuring file and disk sizes, some use 1000. It will be the same number of bytes in each case but 1000 bytes in one case would exactly equal 1MB, and in the other it would be 0.9765MB.

Editing scroll view frame size in IB causes table view to change

I suppose this is a continuation of the problems I was having with the table view resizing: http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0.
I have a controller which needs to have a scroll view with numerous elements attached to it, including a table view.
I have performed the following steps:
- Set the simulated interface elements of the owning view to a nav bar.
- Added a scroll view to the main view in the nib file.
- Set the file owner view controller subclass' view to the scroll view.
- Set the contentSize of the scroll view to the desired size in viewDidLoad.
The problem is that the table view size/position are incorrect when I load the view in the iPhone simulator if I change the scroll view's frame size from 320x460. Basically, every time the scroll view frame size is changed, it causes the scroll view position and size to change.
However, there are times I want to make the scroll view's frame size bigger in order to edit items that might be offscreen when the application is first loaded, which becomes awkward if the size of the view in IB or in code without causing the table view size/position to change. I keep having to change the size of the scroll view frame, edit the items, change it back to 320x460, and then fix the table view.
Is there a way around this, such as a way to locking the size of a table?

Hi Kaspars,
I would say there is atm no possibility to change the table view size dynamicly, because you can't input a formula into the size field so the size is fixed as you enter it.
Best Regards,
Marcel

Viewing size changes from FCP to QT

Similar Messages

Maybe you are looking for