Views in create relationship screen

Hello !
I am trying to create a partnerlink that fetches data from SQL Server Table and view. Now the list comes for both and I select them then I define the primary key for the view.
When I try to create the relationship between both. It comes parent table and child table. in both lists the view is not coming.
is relations is restricted to tables or there is a way I can view it and create relation with it
Thanks,
Baraa

Hi
May I know which version of bpel process manager you are using.
It is not possible to create relationship over views in the 10.1.2.
You can try the same with Oracle BPEL process Manager 10.1.3
HTH!!!

Similar Messages

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Creating Relationships between views, causes writable mapping error

Hi
I'm using the DBAdapter in ESB (10.1.3.3), which uses Toplink and I am trying to create a relationship between a table and a view. None of the objects have any keys or indexes, so I am creating a relationship directly.
When I have created the adapter service and compile the ESB, I get the following error:
Descriptor EmployeePhonesV -> The following primary key fields are unmapped: STAFF_NUMBER
Descriptor EmployeePhonesV -> The following primary key fields have no writable mappings: STAFF_NUMBER
When I imported the view, I had to tell it that the primary key was a composite as there is no real unique key field.
Is this a known problem that I can't create relationships between views???
Any help most appreciated.
Chris

Hello Chris,
The exception is stating there isn't a mapping capable of setting the STAFF_NUMBER field. How do you have this field mapped? Generally there should be a writable either direct-to-field mapping or OnetoOne mapping using this field though other types of mappings will work.
Best Regards,
Chris Delahunt

When i scan in PDF and view it on the screen it has a blue effect

When i scan into PDF and view it on the screen it has a blue effect

What scan software do you use? Adobe Reader can't create PDF files.

How to assign maintenance view to a selection screen field in a program.

Hi Experts,
I have created a custom table. Now, I have a program where there is a selection screen field for example "Load". After entering a value in the selection screen, and press enter, the user must be redirected to the maintenance view of the custom table to modify the specifed record.
Can anyone help me on how to do that?
Thanks a lot for ur precious help.
Regards,
Aksh

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

Trouble viewing photos in full screen and editting

I'm pretty sure that I uploaded some corrupted files into iPhoto. This action rendered all of my photos useless. I can't view them in full screen mode, and I can't edit them. I can see them as thumbnails though. I have them all backed up (uploaded in Picassa). I tried a whole bunch of things, including many of the things listed here (http://discussions.apple.com/thread.jspa?threadID=1425139&tstart=225), but to no avail. I figured if I got rid of the corrupted files it would work, but that didn't fly either. So I took a random picture and uploaded it to a now empty iPhoto and the same problem happened. I have not had any problems with my macbook until now. Any ideas?

Welcome to the Apple Discussions.
Uploading "some corrupted files" into iPhoto will not "render all of (your) photos useless".
This sounds like you have a damaged database file.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Table view control problem in screen painter

Hi All,
i am unable to display the contents in the table view control in screen painter....actually i have created two screen one to take input and second to display details on next screen in table view control..but i m nt getting that details...
my second screen PBO/PAI code is
PROCESS BEFORE OUTPUT.
loop at itab with control TCNTRL CURSOR tcntrl-current_line.
MODULE STATUS_0101.
endloop.
PROCESS AFTER INPUT.
loop at itab.
endloop.
MODULE USER_COMMAND_0101.
can anyone solve my problem????????
Thanks,
Jayshree

Hi,
Use below approch (syntax may not be correct as I have typed it in notepad but use it as guide line)
***In screen flow logic
PROCESS AFTER INPUT.
module cancel at exit-command.
chain.
    field: zproject_details-originator,
        zproject_details-proj_type.
    module check_data on chain-request.
endchain.
module user_command_002.
***In abap code
module cancel input.
leave program.
endmodule.
module check_data input.
if zproject_details-originator is initial.
    message exxxx "throw error message here
endif.
if zproject_details-proj_type is initial.
    message exxxx "throw error message here
endif.
endmodule.
module user_command_002.
save_ok = ok_code. "good practice to save okcode
clear ok_code.
case save_ok.
    when 'save' " using constant for fcode here is better
      perform save_data. "make it moduler instead of writing whole code in case statement
enscase.
endmodule.
form save_data.
** do some additional checks if required before saving
update zproject_details from zproject_details. " update database table here from work area contents
endform.
Regards,
Vishal

Creating Relationships and using synchronization parameters in SUP

Hello Experts ,
I am developing an iPhone application using generated code from sup .
I want to put forward some querries that i have in my mind .
Basically my scenario is i have an equipment list and details for each equipment .
On iPhone one page displays the list and on clicking on any equipment i go to another page displaying eq details .
1.How do i filter data for details based on particular equipment number selected on first screen .
2.In SUP i have 2 mbo's , one for eqpmnt and another for details .Does creating relationship between them in sup changes generated code and filters data automatically in xcode .
3.Do i have to use synchronization parameters in this case to filter out data .
If not please tell me how should i go forward about this .
Any kind of help would be appreciated .
Thanks & Regards ,
Rockky .

Hi Rockky,
1- If you want to filter data on page displays list then you have to create synchronization parameters. Once you retrieved data from back-end it all comes to CDB (sybase consolidated database) so synchronization parameter filters data from cdb for which input you entered.
2- If you display detail of any equipment you have to set relation between root and child MBO.
there is a very clear tutorial which sybase provides you can find samples about using relations and synchronization prmtrs:
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01213.0200/doc/pdf/sup_tutorials_ioscodegen.pdf
Regards
Tahir

Can´t view photos in full screen after loading photos to dropbox? what to do?, can´t view photos in full screen after loading photos to dropbox? what to do?

after loading photos to dropbox i can´t view them in full screen in iphoto ... i can only view them small ... when i click on them this sign "!" appears... do you know how to fix this????

If you're loading photos to drop box why do you expect to see them in iPhoto?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Material not getting displayed in create asn screen

Hi All,
We are not able to see the material under create asn screen in SUS tho the same appears wen we open the PO in SUS.Also,please let me know which function module in sus governs the display of material in create asn screen
Thanks,
Manu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults

Can new PWA views be created whereby a filter can be set and associate to the view by default? (Project Server 2013 ONLINE)

My main question is: Can new PWA views be created whereby a filter for that view can be set, and associate to the view by default? (Project Server 2013 ONLINE)? and can I have a filter set to filter on person logged on to...
In previous versions of Project Server, when CREATING a PWA view, we were able to apply/ define a filter for that view. Does not seem like it is the case in Project Server 2013 Online. And if I remember, we could also use the URL Guid_view_id.
Please confirm; and / or tell me how-to.
What I was hoping to do is the following... Given that our standard that we have adopted for reporting time is 'My Timesheets' (fyi, Single Mode Entry=ON), we have some resources who have others who do it on their behalf via 'My Tasks' (ie., accomplished
by using the 'Assignment Owner' field, accordingly). Therefore, when entering time on someone else's behalf within 'My Tasks', we like to present the user that is logged in only the tasks that they are are assigned to update on others' behlaf.
I know that there is another more elegant approach to doing this which may be to use the Delegation feature. But since we are trying to stick to Sharepoint Security mode for now, this is not an option for the time being.
Any help appreciated would be greatly appreciated.
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Hi Spiro,
1- You still can define in Project Online a filter in the view settings, it is located just above the category setting. Here is a screenshot of the summary project center view:
2- The view GUID is not anymore in the URL, since the URL triggers an action only on the webpart and not on the whole page. I agree this is annoying since it was great to send a URL with a specific view.
3- Concerning the access to my timesheet versus my task, I'm not sure to get a full understanding but on a general way, it is much more easy to deal with those situation using categories which you cannot do with the SP permission mode.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

When I search a music artist in the itunes store and then click to view all albums the screen is blank.

When I search a music artist in the itunes store and then click to view all albums the screen is blank. Why is itunes store not showing me all of the Albums?

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode

Issue in Creating a screen variant for FV50 through SHD0

Hi,
I need to create a Screen variant for FV50 to hide the post button through the Transaction SHD0, It was working fine and the function keys BU and BS i disabled in the variant, but the problem is when i disabled the Function keys from FV50 it is not allowing me to post the transaction in FBV0 also. I found that T code FV50 is using the program :SAPMF05A and FBV0 is using : SAPMF05V.
Is there any way to overcome the issue through the transaction SHD0 ?
Regards
San

Hi,
To Create aVariant You can use Tcode : SHD0.
Provide the tocde and clik on Screen variant and create...
You can follow the below link as Reference ..
Link:[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Hope it helps you.
Thanks
Arbind

Views in create relationship screen

Similar Messages

Maybe you are looking for