Views maintained at material master
hello every body
is there any report where we can see the views which have been maintained for a perticular material in material master
one of our client required that
regards
jayaker
Additionally:
SE16 + MARA > MARA-PSTAT shows which views have been created for materials. Pushing F1 on this field you get the explanation what's the meaning of the letters.
Regards,
Csaba
Similar Messages
-
Oil view in the material master
Dear SAP Guru,
in our project, we share same material type with oil view activated for other Non-HPM Product. i have not maintained oil view data of material master for Non-HPM Material. But if you select oil view, the other field like UoM group , conversion group are visible as blank.
When you select oil view, System should give error message- Oil specific data not active for the organizational level. Message No. M3386
Any advise.?
Reagrds,
Dilip Chavan
SAP IS-Oil ConsultantHi Shichang,
Requirement is to pop up error message if oil view is not maintained for Non-HPM material.
Regards,
Dilip Chavan
SAP IS-Oil (Downstream consultant). -
How to maintain the material master data in plant
Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
BaluCheck the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.
-
Accounting & costing view in the material master
hi
my client wanted to block the accounting & costing view in the material master for the end users
what i need to doHi,
You can (Authorization material master by views of accounting & costing ) achieve this by way of authorization control. In transaction PFCG, select your role for creating / changing the material master. Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected. You have to select those views in all the roles related to material master (create, change, display).Better Consult Basis Consultant,
Regards,
Biju K -
Currency in the Accounting View of the Material Master
Hi everyone!
The accounting tab/view in the Material Master has currency in the General Data tab. In our case, the currency is defaulted to PHP. I found the field in SPRO but it is non-configurable. Is there anyway I could it in other SPRO field so that I could configure it to changable currencies (for example, I wanted to change from PHP to USD, etc.)
Thank you so much.It will be Picked up From the Comp Code Currency..
As the Plant is assigned to Comp Code, when you create the Material for that Plant ..
It will pick up from the Comp Code Currency..
You can check Comp Code Currency in OBY6 trxn..
Edited by: Manohar Raju on May 16, 2008 3:30 PM -
Label Data view in the material master
Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
KarenDear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi -
Deleting QM View in the material master
Hi
Is their any way we can delete the QM view in the material master , once it is created
Thanks
JJHi
Deleting a QM view is not possible
what You can do ...is Deactivate all Inspection Types that you have assigned by QA08
or do mass changes using MM17(MARA & MARC) and remove all fields.
It is as good as removing QM view.
Note:
u can set deletion flag at plant level or client level. ONce u do that u can delete that particular material from that plant using sara transaction . But note that all view at that plant level vl be get deleted
so better to make it blank
Regards
Sujit S Gujar -
New Text in the Sales Text View in the Material Master
Hi All,
I want to create new text ID in the material master sales text tab
Can you please help me in how to create the new text for material master sales text tab view.
Regards
RajeshWell it may not be possible by standard SAP to create in Material.
AN alternative might be to use a standard text type and then call it in your Text Determination Procedure.
T-code "SO10" --> Give "Text Name & Text ID & Language --> Click at "Create" --> On next screen --> Go to (Menu) --> change editor --> Write the text which you want
Go to VOTXN , and maintain the required confirguation to get this standard Text copied to the material during order processing.
Regards
Sai
Edited by: Sai on Apr 16, 2010 1:39 PM -
View document in material master, Basic data 2 screen?
Hello gurus,
How to view a DIR assigned to material master - basic data 2?
According to help.sap.com:
Additional Function for Material Master Record:
In Customizing for the Material Master, you can define a standard document type by choosing Make Global Settings.
- Done this: assigned document type needed, created a DIR with that type and assigned it to a given material
Documents of this standard document type are displayed in the material master record, in the Basic data 2 view (Extras ® Document data).
- Information of the DIR can be seen in the main screen, no path Extras --> Document data (I know DIRs are shown behind menu path Additional data --> Documents)
You can display the original application files of a document (for example, an engineering/design drawing) directly from the object (for example, material) using a display application (viewer).
PROBLEM starts here: no icon or button to click in order to view the document although the help states so.
Any idea what should be done? Should I install a software of some sort to view? Assign it somehow with SAP? The document type here is doc (MS Word), so nothing special.
Any advice is highly appreciated.
BR,
PipsaHello Sam,
Sorry, I think I described the problem inaccurately.
I could see the document already but for that I must follow the path Additional data --> Document data.
My core question was: Is there a means to allow a user to display the document directly in the screen Basic data 2 since system creates a new subscreen called Design documents assigned anyway?
It seems that the design documents assigned is for information purposes only. It would have been far better with usability to have the display icon in the main data.
BR,
Pipsa -
Mass maintainance of material master
Dear Gurus,
We want to maintain some missing field on the MRP views of the material masters for all materials(FERT, HALB AND ROH). Pls what T-CODE or how can we maintain this since the materials are up to 10,000 in all.
ThanksHi
As you have more records, its good to use LSMW batch input or BDC
With regards
Pavan -
MRP view maintenance for Material Master
What is the basic entry for R3 material master, if, I want EBP below condition works:
Stock in R/3 sufficient: Shopping Carts creates MatReservation.
Stock in R/3 not sufficient: Shopping Cart still creates MatReservation, and when run MRP (in R/3), it gives Purchase Requisition, with the exact shortage qty.
Info: We have set customizing in EBP so that every follow-on document for Shopping Cart will be Reservation.
-Mimi-In R/3 , the material should have MRP view and all planning related settings ...
wr u want to go for consumption based planning or deterministic planning .
Based on the planning procedure setting in MRP views of the R/3 sytem , PRs will get generated.
This is what u are looking for .. otherwise post your feedback...
Regards
Mani -
List of Views Maintained for Material
Hi Friends,
Is there any transaction or table where I can check views maintained for particular Material ?
I want to see exactly which views are there,as I have seen MM50 where I see some view which are not maintained for that material.
Please let me know.
With Best Regards,
RajeshHi,
You can check the field MARA-VPSTA, in which views maintained are shown as follows
A Work scheduling
B Accounting
C Classification
D MRP
E Purchasing
F Prod. resouces/tools
G Costing
K Basic data
L Storage
P Forecasting
Q Quality Management
V Sales
Z Storage location stocks
Y Plant stock
Regards,
Amol -
How can I extract the list of fields for every view of the material master?
Hello SAPients,
Is there a table or a FM where I can extract the list of fields that every view of material master have?
I need to create a dynamic selection-screen with something like this:
Basic Data
mara-matnr
makt-maktx
mara-meins
Sales: Sales Organization Data
mara-matnr
makt-maktx
Thank you in advance.Hi
Try to run the trx OMT3B: this the customizing where the dynpro for the views are defined: perhaps u can find something can help you.
Max -
Profit Center Maintaining in Material Master
Dear Friends,
One of my client has Posted a material(without maintaining Profit center in Materila master) to wrong profitcenter.
Now he is trying to maintain the correct profit center in Material master record for that material.
But system not allowing this as there is stock for that material in warehouse.
My client Requirement is,
He want to maintain the correct Profit center in Master Data without reversing the whole stock.
Can u pls tel me is it possible or not.
if it possible means kindly explain the steps.
Rgds,
Sankar DIf your client is very much strict enough to change the profit center in Material master only then you also tell him strictly that it is not possible & thats why the system is giving the error message.
Regards,
Indranil -
Purpose of maintaining classification view in material master
Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang
Maybe you are looking for
-
Cannot send email from the Mail App?
I've had an izymail subscription for 1 year and just renewed it last week. I could never send an email from my Mail App without a window popping up stating "izymail cannot connect to the server" and the sending bar (along the bottom of the screen) ju
-
HP Color LaserJet 4700dtn. Won't Print from printer queue.Event Code 68 8002
From the start of using this printer about a year ago I normally just plug in the usb wire from the laptop and it works. For some reason about 3 weeks ago it seems to have stopped receiving data from the computer . A different wire to the printer wil
-
Resizing window below the Dock
I know this is weird, but I swear I've done it on another machine. I'm using Leopard 10.5 and for this example I'll choose Calendar. This problem happens to most windows. When I maximize calender, either but hitting the green button, or dragging the
-
In prior versions of Firefox I had three tabs pop up when I started the program. I load the addresses for those same three tabs into my home page setting under options...close Firefox...then start it up again and the tabs don't get saved. Not sure wh
-
I cannot open my e-mails, I can do everything else, but that.
I receive e-mail but cannot open them, I was on the phone with comcast for 1 hour yesterday, and they cannot open them.this is my only e-mail, I do not have a yahoo account or anything else.