Viewset does not have data passed from GenIL

Hi All,
We have a custom component in which data is not getting passed from a ViewSet to the Overview page. The details of the issue are given below:
There is a detail view zsoEF and a table view zsoChild. These 2 views are housed in a viewset zsoVS. This view set has an event Eh_OnBack which requires the data from views zsoEF and zsoChild to be passed to overview view zsoOV.
We recently upgraded to CRM 7.0. After the upgrade, the values entered on the views zsoEF and zsoChild are processed in the ZGenIL. The context nodes and the custom controllers are filled correctly with the screen values and some auto added data based on validations..
When we click on the Back button, then Eh_OnBack does not have data in the Custom Controller. I am not able to pin point the reason for this missing data in the Back event. From the way i understand, when we do data binding in the views, we don't have to do that in ViewSet. Has there been any change in this design in CRM 7.0?
I would like to know if there is any workaround for this issue.
Thanks,
Rini

Hi Rini,
Did you try to bind the context nodes with the component controller. Can give it a try whether it resolves the problem. Any way it is difficult to say anything as we don't have an idea what exactly you did in the component. Lets take it forward. In the mean time have a look in the below link.
History navigation and context initialization calls - CRM - SCN Wiki
Thanks,
Javed.

Similar Messages

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

Using a dll function that does not have any inputs from a VI

Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project. I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call. I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)).
Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
Thanks, Mike

Thanks for the responses guys:
I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument struct status_struct* status as only an output instead of the default of input and output.
I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface.
This is in all likely hood a case of my self being too dense and missing something fundimental ;-) I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
Attachments:
Start.jpg ‏7 KB
shurtdown.png ‏9 KB

List View does not retain date formats from Excel

i am using List View control to isplay data. When i scroll the horizontal bar inlist view, the date format changes to numbers. is there were to stop this happening.
regards
Chandra

Hi Chandra,
Are you getting the values from any live connection or is it static data from the excel file?
You can also try to goto properties of component and in the appearence tab,select the format of the values as "DATE".
Incase you are getting the values from the live connection, you can select a different cell which would reference to the data coming from the connection and use it into the components.
e.g.: if values are coming in cell"A1" then goto some empty cell as B1 and type in"=A1" and use this new cell into the component.
Let me know if this works.
Thanks,
Amit.

Clean up old SID values from an InfoObject that does NOT have master data

I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID table will never be used again. My problem is that these values are still displayed in the F4 value help. And because the old values are very similar to the new values some users mistakenly pick the old value and then the query results come back empty.
FYI - The datasource that uses this infoobject as an attribute is extracted from R3 in a Full load each night. So there is no risk that the old values in the SID table will be needed in any Master Data/Cubes/DSOs/etc.
Is there a way to delete the unwanted SIDs from this table /BIC/SXCSAOFREG? Or is there some way to make sure that the unwanted SIDs to not show up in the F4 value help?
Thanks,
Dave

Hi David,
Goto SE14 trans --> ENter the table name as /BIC/SXCSAOFREG. Select the "Edit" radio button. Then Select "Delete Data" radion button & click on "Activate & adjust database". But be very careful NOT to click on Delete Database table(This will delete the physical database table!!!
Regards,
Pavan

I have changed computers and installed iTunes on my new computer. I want to sync my iphone now but the "sync" program indicates that it will remove all data on my phone and replace it with the newly installed itunes that does not have my information.

I have a new computer and have installed iTunes on it.
Now I want to sync my iphone but the new itunes on the new computer wants to remove everything on my niphone and replace it with what's on the newly installed itunes data but it does not have my data.
How can I sync the new itunes with my iphone and not have my phone data wiped out?
Thanks,
hscllc

hscllc wrote:
How can I sync the new itunes with my iphone and not have my phone data wiped out?
There is no way to stop iTunes from doing exactly what it is designed to do.
The iPhone is designed to sync with one and only one computer.
If you have moved/copied your iTunes library from your old computer to your new one, then iTunes wiping your device is no problem. You would simply sync and iTunes will put all the content back.

I need to get some video files onto my iphone from a computer that does not have my itunes library on it

Currently I am away from home, and using a computer that does not have my main itunes library on it. I do, however, have some video files on this computer that I would like to place onto my phone for the drive home tomorrow. Unfortunately, It seems there is no way to do this without completely wiping my iPhone and replacing it with this computers empty library, as the "manage content manually" feature apparently requires me to do this. Is there any way to just add some mp4s to my iphone without erasing all of its data?.

ManSinha wrote:
What kind of computer?
On a Windows PC plugging in your phone will invoke the Autoplay dialog which also gives some options
But only if iTunes is installed on the computer and is paired as a trusted device. Which the OP does not want to do.

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

Received ipad2 synced to itunes and uploaded my backup, now I find out it does not have WiFi 3G and need to return it, is there a way of getting all of my data off the ipad2?

Received ipad2, synced to itunes and uploaded my backup from my Ipad, now I find out that it does not have Wi-Fi+3G, need to return it, is there a way to get my data off the ipad2 so I can return it?

if you mean restore it to factory default then you can choose that while having it connected to the computer and using itunes

I have trouble creating a pdf portfolio from Outlook: the result does not have "From" or "Subject"

I have trouble creating a pdf portfolio from Outlook: it creates the portfolio, but the result does not have "From" or "Subject" in the index. Please help!

Thank you, I am aware of this function. The fields are present, but blank. (It seems that the data is not getting exported…)
Please keep trying to help me!
-Nancie

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

The data object "FP_FORMOUTPUT" does not have a component called "XML"

Hello All,
When i tried to run a simple report with ADOBE form i got this message:
The data object "FP_FORMOUTPUT" does not have a component called "XML"
I saw that the field XML is really missing in structure fpformoutput!
Also in structure sfpoutputparams the field GETXML is missing!
Is there a note to fix this?
The system status is:
Database system      ORACLE
Release              10.2.0.2.0
SAP_BASIS     700     0012     SAPKB70012     SAP Basis Component
SAP_ABA     700     0012     SAPKA70012     Cross-Application Component
ST-PI     2008_1_700     0000          -     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C     PI_BASIS 2005_1_700
SAP_BW     700     0013     SAPKW70013     SAP NetWeaver BI 7.0
SAP_AP     700     0009     SAPKNA7009     SAP Application Platform
SAP_HR     600     0016     SAPKE60016     Human Resources
SAP_APPL     600     0009     SAPKH60009     Logistics and Accounting
EA-IPPE     400     0009     SAPKGPID09     SAP iPPE
EA-HR     600     0016     SAPKGPHD16     SAP Enterprise Extension HR
EA-GLTRADE     600     0009     SAPKGPGD09     SAP Enterprise Extension Global Trade
EA-PS     600     0009     SAPKGPPD09     SAP Enterprise Extension Public Services
EA-RETAIL     600     0009     SAPKGPRD09     SAP Enterprise Extension Retail
EA-FINSERV     600     0009     SAPKGPFD09     SAP Enterprise Extension Financial Services
EA-DFPS     600     0009     SAPKGPDD09     SAP Enterprise Extension Defense Forces & Public Security
EA-APPL     600     0009     SAPKGPAD09     SAP Enterprise Extension PLM, SCM, Financials
FINBASIS     600     0009     SAPK-60009INFINBASIS     Fin. Basis
ECC-DIMP     600     0009     SAPK-60009INECCDIMP     DIMP
ERECRUIT     600     0009     SAPK-60009INERECRUIT     E-Recruiting
FI-CA     600     0009     SAPK-60009INFICA     FI-CA
FI-CAX     600     0009     SAPK-60009INFICAX     FI-CA Extended
INSURANCE     600     0009     SAPK-60009ININSURANC     SAP Insurance
IS-CWM     600     0009     SAPK-60009INISCWM     Industry Solution Catch Weight Management
IS-H     600     0009     SAPK-60009INISH     SAP Healthcare
IS-M     600     0009     SAPK-60009INISM     SAP MEDIA
IS-OIL     600     0009     SAPK-60009INISOIL     IS-OIL
IS-PS-CA     600     0009     SAPK-60009INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT     600     0009     SAPK-60009INISUT     SAP Utilities/Telecommunication
LSOFE     600     0009     SAPK-60009INLSOFE     SAP Learning Solution Front-End
SEM-BW     600     0009     SAPKGS6009     SEM-BW: Strategic Enterprise Management
ST-A/PI     01L_ECC600     0000          -     Application Servicetools for ECC 600
Thank you all In advance,
Eran FOX

Hello Otto,
Thank you for your reply...
If i enter se11 to see the structure of FPFORMOUTPUT for example... i get the following structure:
PDF     FPCONTENT     RAWSTRING     0     0     Form Processing: Content from XFT, XFD, PDF, and so on
PDL     FPCONTENT     RAWSTRING     0     0     Form Processing: Content from XFT, XFD, PDF, and so on
PAGES     FPPAGECOUNT     INT4     10     0     Form Processing: Number of Pages Created
LANGU     LANGU     LANG     1     0     Language Key
can you see any XML field here?
This is OLD as you said - but how can i get the proper one?
Thanks again,
Eran

HT4623 my ipad does not have ; up date sofware; what do i do to up date sofware?

HOW can I update my sofware in my ipad first gen, my ipad does not have ' UP DATE SOFWARE"
Is there away that I can do i?i

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

The data object does not have a component

Prior to making change to Z program, I did syntax check and got:
The data object "WA_D003" does not have a component called "ZSHIFT".
This Z program is in the End Routine of a transformation from a PSA to DSO. I get the error when syntax checking, but when executing the DTP, there is not an error and ZSHIFT gets populated as expected.
I am hesitant to make a program change and transport up.
This is all in our BW Development box. I checked the code against what is in BWQ & BWP and the code is exactly the same as is the DSO InfoObjects. However, in BWQ and BWP, I do not receive the error when doing a syntax check.
I've searched customer messages and have had no luck. I also treid to add an attachment to this question, but it won't allow me to. Thanks for any help.

pretty hard to help you as we have no clue what you're actually doing with WA_D003 and ZSHIFT, no?
so you're calling a z-program in an end routine?
what does that program do? what are it's parameters/select options?
what are you doing with the results of that program in the end routine?
what are WA_D003 and ZSHIFT? I'm assuming the first one is a work area and the latter a field you're trying to fill in the end routine?

Viewset does not have data passed from GenIL

Similar Messages

Maybe you are looking for