Vignette integration with OBIEE reports

Hi all,
Can OBIEE porlets integrated with Vignette portals
oracle recommends only "Oracle Portal 10.1.4.x","Oracle WebCenter 10.1.3.2","IBM WebSphere Portal Server 5.1, 6.0"
as JSR-168 compliant portals
if it is possible ,please let me know how to configure it?
thanks
saran

I am in the same boat.
Have you found an answer to this?
If you have, can you please gimme some direction on how to integrate the two.
Regards,
Thanks.

Similar Messages

  • ECC integration with Crystal report 2008

    Hello,
    If some one have guide of ECC integration with Crystal report 2008 ? Please share me I need to integrate ECC to crystal 2008 integration.
    Regards,
    Sankar.G
    Basis Cosultant

    Do not cross post.
    Read the "Rules of Engagement"
    Regards
    Juan

  • Active directory Integration with OBIEE

    Hi all,
    Can any one send me a link for active directory integration with OBIEE.
    I have imported the users succesfully and I was able to login to analytics as an AD user.
    But SSO is not possible. Kindly help me over this.
    Thanks,
    Haree.

    Thanks for reply veeravalli.
    Me too followed the same link and successfully imported all the users from AD into OBIEE and login in is also possible.
    But my requirement is to have Single Sign On ie.., users may log on to their Windows PCs and access Oracle BI EE via a standard web browser with no further authentication required on their part.
    Thanks,
    Haree

  • Oracle Life science Data Hub integrated with OBIEE 11g

    Hi all,
    I have couple of questions from my end,
         1. How Oracle Life Science Data Hub can be  Integrated with OBIEE 11g.
         2. Whether Oracle LSH is a separate software ?  if it so kindly provide the link to download the LSH.
    Many thanks in advance.
    Regards,
    Murali

    Hi Murali,
    I do not know whether obiee can use Oracle LSH as a source or not but please refer below link. It says that
    1) Users can then launch the Oracle Business Intelligence Dashboard
    either through Oracle LSH or through a URL to see data visualizations.
    2)
    Oracle LSH Release 2.2 supports using OBIEE 10.1.3.4.1 for both programs and
    visualizations and OBIEE 11.1.1.5.0 for visualizations only.
    Please check with you administrator.
    Thanks,
    Amol
    (Please mark this answer, if you find correct)

  • BI Publisher Performance integrated with OBIEE 11g

    Has anyone seen issues around the performance of rendering the BI Publisher frame when it is integrated with an OBIEE dashboard (11g)?
    If I create a simple BI Publisher off a simple data model (Select 1 from dual). I open the BIP report within the BI Publisher environment (XmlpServer) and it opens in seconds.
    When I open this same report within the OBIEE Web Catalog or place it on a dashboard page I have seen it take upwards of 40-50 seconds to render the frame then the report. The time seems to me more around rendering the frame.
    Usually when you initiate your first session you see the longest rendering time, subsequent runs of the report are lower but still higher then the few seconds it takes in the BIP environment.
    Has anyone else seen this issue, we opened a ticket with Oracle and it seems they are leaning toward creating a BUG around this. Just wanted to see what others were experiencing and if they identified the source of the issue. Thanks.

    Hi Dustin,
    The FMW security model in BI Publisher means it is integrated into OBIEE - I believe it's the default. If you're using authenticating and authorising via weblogic then I can't think of a good reason to use BI Server authentication in publisher, you should be using FMW security.
    In answer to your question tThere was no bug raised. The work around for us was using document 1338007.1. In your case that doesn't seem necessary since you're using OVD already.
    Edit - should just add that if your OVD authentication is set up in the repository then you need to shift that to the weblogic server security model and remove any authentication logic from the repository. After that the FMW security model for publisher should work.
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm
    Regards,
    Robert
    Edited by: Robert Tooker on Nov 3, 2011 2:07 AM

  • SAP B1 8.8 integration with Crystal report

    Hi Experts,
    Is there different Installer for SAP B1 8.8 version.
    I installed crystal report for SAP B1, but I am getting following error
    " External connection to database failed. SAP Crystal add on may not function properly. Please rerun the Account setup with Superuser login"
    I am login as Super User & When i am trying to open Account Setup , i am getting following error -
    " Item - Could not commit action because the item is currently in focus. [ 66000-23]
    could you please suggest, possible solution
    tks,
    Sb1

    Hi Sb1,
    There is no external addon and installer for Crystal report integration with SBO 8.8. Just install SBO8.8 and CR2008 is using for only designing the reports. SAP already incorporated all the related integration in SBO 8.8 version.
    Thanks
    Sachin

  • ECC5 integration with crystal report

    hello friend
    i am looking to integrate ecc5 with crystal reports can any one suggest me the  solutions for generatign reports in crystal report usising sap r/3 ecc5 version

    Hi Nomadus,
    I have to use Crystal Reports because this is what my customer already has.
    Actually it's an integration with NO Oracle products.
    Any idea?
    Thanks

  • Portal integration with bo report was not opening from folders

    Dear friend,
    Please can u give me suggestion/solution on the following area, we are implementing business objects XIR2 portal integration with weblogic in which after login to business objects through portal report was not opening.
    Regards
    sekhar

    hi,
    please can you provide solution on this it is very urget purpose. i am able login to portal from portal when clicking on the report it was not opening.
    regards
    sekhar

  • Oracle IRM integration with OBIEE

    Hi! I need to integrate Oracle IRM with OBIEE. Is it possible? Is there any paper or document that explains how to do it? This would be very helpful. Thanks!

    The IRM integration with Beehive was developed by and is maintained by the Beehive team, you may be able to get more help on the Beehive forums (http://forums.oracle.com/forums/category.jspa?categoryID=180). In the meantime I'll try to answer your query to the best of my knowledge.
    The ClassificationId can be can be any text that you wish to use to identify the beehive classification e.g. Beehive Classification ID.
    The ClassificationLabelName should be used to identify the Beehive classification to the user, it will be displayed in the IRM user interfaces in places such as the information bar.
    The ClassificationSystemID and KeySetUUID values should each be set to their own UUID. You can generate one on linux using uuidgen.
    The DesktopSyncURI and the DesktopURI values should be set to the IRM classification url e.g. https://irm.example.com:16101/irm_desktop.
    The IrmDesktopServiceEndPoint should be set to the IRM server url followed by /irm_sealing/desktop_services e.g. https://irm.example.com:16101/irm_sealing/desktop_services.
    The IrmSealingServiceEndPoint should be set to the IRM server url followed by /irm_sealing/sealing_services e.g. https://irm.example.com:16101/irm_sealing/sealing_services.
    The IrmUserName should be a valid user that can log into IRM and Beehive
    The IrmUserPassword should be the password for the above account
    The other values can be left blank.
    The ClassificationServices error from IRM is likely to be related to the xml file in the classification plug-in jar file. The most frequent causes of those have been where XML editors have reformatted the example configuration changing things like
    <uuid>2de4af00-3b14-11de-8a39-0800200c9a66</uuid>
    to
    <uuid>
    2de4af00-3b14-11de-8a39-0800200c9a66
    </uuid>
    The fussy XML parser then refuses to parse the UUID properly because of the surrounding whitespace. This is most likely to be a problem with fields that take UUIDs, so probably just worth checking those first.
    Hope this helps,
    James

  • Integration with Crystal Report

    Hi everybody,
    I have to integrate a process with Crystal Report.
    A customer need to have a task form with a Print button that prints a report created with Crystal Report.
    I know that you can use webservices to call Crystal Report, but I've not found articles about this integration with Oracle.
    Have you ever faced with something like that?
    Do you think it's possible?
    Thanks
    Marti

    Hi Nomadus,
    I have to use Crystal Reports because this is what my customer already has.
    Actually it's an integration with NO Oracle products.
    Any idea?
    Thanks

  • BPEL integration with OBIEE

    Hi
    What are the steps to integrate with OBIEE using BPEL?
    We are going to integrate with Web Center Interaction at the other end.
    I really appreciate if you can share if you have a document or instructions / links on how the same be achieved

    hi this is me only iam posting the error if somebody can help out
    fault code
    <fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>550</code>
    </part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_3/bpel/domains/default/tmp/.bpel_flow_2.8_8a61747c4951199a7b5a330c139c4f40.tmp/mainframeftp.wsdl [ Put_ptt::Put(MLWriteOffs) ] - WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
    Unable to send file to server.
    ; nested exception is:
         ORABPEL-11429
    Error sending file to FTP Server.
    Unable to send file to server.
    Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
    </summary>
    </part><part name="detail"><detail>550 Mismatched quotes on pathname 'SCHED.'/NTACF.ICCMH.IC100810.IC19.TRANS(+1)/sample</detail>
    </part></bindingFault></fault></messages>
    from ftp command prompt it is successful
    ftp> put sample 'NTACF.ICCMH.IC100810.IC19.TRANS(+1)'
    200 Port request OK.
    125-Waiting for volume mount for volume WRK002
    125 Storing data set NTACF.ICCMH.IC100810.IC19.TRANS.G0007V00
    250 Transfer completed successfully.
    ftp: 105 bytes sent in 0.00Seconds 105000.00Kbytes/sec.
    __________________________________

  • MapViewer Integration with OBIEE

    Hello,
    We are trying to integrate Mapviewer with OBIEE (10.1.4.3.1), I have gone through the documentation but I couldn't find any documentation on how to deploy mapviewer using IIS.
    Please correct me if I am wrong, I heard that Map viewer doesn't work with IIS ??? Then how I deploy the Mapviewer. Any inputs are highly appreciated.
    Thanks in Advance,
    - Abhi

    is there any suggestion ?

  • Iphone integration with OBIEE

    Hi Experts,
    Can you please send it any setup and configuration document to integrate IPHONE with OBIEE to [email protected]?
    Appreciate your help on this.
    RMD

    I downloaded app called "Indicators" from App Store
    enter the URL where your BI is hosted eg: "servername.domain.net:9704/analytics"
    username: weblogic
    password: yourpassword
    and you are done.

  • Microsoft office integration with OBIEE

    Hello,
    can you please help me in
    how to integrate microsoft office with OBIEE Presentation services and how do we achieve it
    and also how to integrate microsoft outlook mail with OBIEE
    thank you
    kumr

    Go through these links
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_addin/bi_office.htm
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/delivers/delivers.htm
    Thanks
    Srinivas

  • CUIC integration with CVP reporting

    Hi,
    I am trying to integrate CUIC with CVP reporting . Please let me know how to check the Instance name of CVP reporting database.
    Regards
    Krishna

    Hi Krishna,
    Database name should be: cvp_data
    Instance name should be: cvp_db_servername
    Otherwise you can find it from memory by logging into the CVP ops console, going to the reporting server and there's an option like Database Details or something.
    What version of CUIC are you running? I'm just trying to hookup CUIS to CVP at the moment with 7.5.4 and I'm having Informix driver issues as it doesn't look like the Informix SDK isn't installed even though it was meant to be bundled with the install after 7.5.2 so I've got a TAC case open for this at the moment.
    Cheers,
    Nathan

Maybe you are looking for