Vimeo panel not loading on FCP X

I've been using Final Cut Pro X for a few months now to do some minor edits for my company's Vimeo account, and until now have used the Share --> Vimeo... panel to upload our clips. However today when I went to export a clip the menu stopped working. When you roll over the menu (see screenshot) and let go no menu pops open to export to Vimeo. Infact, nothing happens at all.
Is this a preferences problem? If I delete a user preference somewhere will it resolve the issue? I'd rather not have to uninstall and reinstall FCP X.
Any ideas?
Thanks in advance!

Then you've got bad fonts installed on your machine, especially free fonts downloaded from the internet. AI is very picky about fonts. Verify all your fonts and dump the bad ones.

Similar Messages

Adobe Exchange CC Panel not signed + Panel not loading (Win 8x64)

hi there,
since there is no "final solution" for this, i have to ask here. hopefully ;-)
Info
a. Windows 8 64 bit
b. all creative apps installed with "Creative Cloud Application" (no standalone or beta)
c. all "Creative Cloud Apps" are up to date
d. "Extensionmanger CC" version 7.1
e. logged in with an Microsoft-Online-Account
solutions tryed:
1, removed all CC apps via uninstallation
2. run full run "Adobe_Creative_Cloud_Cleaner_Tool" to remove every trace left
3. installed all the programs new and "udate" all.
4. tryed to install the "AdobeExchange.zxp" via extension "Adobe Extensionmanager CC" gives the unsigned-fault every time.
5. no panels open, nor any reaction if i try to invoke "Adobe Excange" from "Dreamveaver CC".
6. fault in "Adobe Photoshop CC (32 + 64)" "cannot complete command because the extension could not be loaded. (kuler doesn't work also
7. no matter if options "warning for unsigened extension" or " no internet access" are ON or OFF in any combination in Extension manager.
8. update to "Application Manager" brings no change
9. after new installation i did not sync from "Creative Cloud" anything, but does not help
10. with synced "Creative Cloud" settings does not do anything better(more worse: it even screwed up all saved online settings)
good to know
I. Extensions install and can be used with an other local account on the same PC.
II. if i change the online account to local account and vice versa brings no changes.
III. "Extension Manager CS6" (with Fireworks) does everything fine
IV. No problems on my MacPro in same network with same "Creative Cloud User Profile"
final question
? What to do that i am able to use "Adobe Exchange" Extensions for "CC" ?
mit freundlichen gruessen
viel spass
s.rul

hi Xiaoyi Tong,
send you an e-mail, thx for your offer
turning off the firewall completly and antivirus does not help
mist
mit freundlichen gruessen
viel spass
s.rul

Blank grey panel showing up in PS 2014, panel not loading

Not an issue with the extension. Sometime loads properly. Sometimes after clicking into the window.
How to fix?
Is there a log somewhere that would provide clues?

Please refer to the System Logs section at: http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/CC14_Extension_S DK.pdf
Increase your logging to 6 and then send the two log files generated to me at lesavage at adobe dot com
I am also concerned that you are not sure where this extension has come from. Do you think you purchased it on Adobe Add-ons?

Labview remote panel not loading

Hi,
I have a colleague who can't see my remote panel.
The site is
http://distillation.engr.utc.edu/WPI/WPI-Distillation.htm
My friend installed the LV runtime for LV 7.1 (which is what
the server has). He gets this response, in addition to the blank panel:
"Application Layer Gateway Service has encountered a problem and needs
to close. We are sorry for the inconvenience.
szAppName : alg.exe szAppVer : 5.1.2600.2180 szModName : ntdll.dll
szModVer : 5.1.2600.2180 offset : 0002d9cb"
Do any of you have any suggestions?
JIM

Consider it ignored.
David_B
Applications Engineer
National Instruments

Re: Audio not working. Control panel not loading.

I'm having the same problem.....and i tried to call you but the number provided by you hv no incoming facility

Please use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
They will be happy to assist you immediately.
Thanks.

Why do I get "error code 3: Could not load front panel" when I run my executable.

I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
Unfortunately I do not have access to the internet at my jobsite so bear with me.
Rob

Hi V-rob,
I'm glad to hear the executable is working now that NI-VISA is installed. Thanks for posting the solution!
Jennifer R.
National Instruments
Applications Engineer

The Apps panel of my Creative Cloud does not load. How can I get it to load?

I recently downloaded Creative Cloud to try Dreamweaver, however, the Apps panel of my Creative Cloud does not load. I've tried restarting the laptop, opening and closing the application, etc. How can I get it to load? I use a MacBook Pro OS X Version 10.9.5.

Computer died need code can you please post a screen shot of the error message. The current released version is 1.8.0.447. The release notes for the Creative Cloud Desktop application can be found at Creative Cloud Help | Creative Cloud app for desktop | Release Notes.

Help please. CS6 exchange panel will not load.

Hi,
I have Photoshop CS6 extended and for some reason my adobe exchange panel will not load. This only happened earlier today. I have been designing all week and never had a problem before this. I cannot load any of the panels in Photoshop. I have done everything possible and trust me I worked on a solution for over 5.5 hours searching reading, uninstalling re installing etc and no solution. I just keep getting this error message "Cannot complete command because the extension could not be loaded".
The version of Extension Manager is 6.0.7.6. I came back to edit this as I should have mentioned that I did disable my anti virus.
I would really appreciate any advice please.
Thank you in advance
Rosa
I have since discovered that the problem was the software onOne Perfect Photo Suite 8 which I had installed earlier today - so have contacted onOne for support. I ended up un-installing the program and Photoshop has returned back to normal.

Obviously my problem was with the onOne new Suite 8 plugin. I had Suite 7.5 as well as PhotoFrame 4.6 Professional Edition and Photo Tools installed, so after trying a few different things my last option which worked was as onOne suggested and that was removing the onOne panel completely from CS6 and re installing Suite 8 ticking the 3rd option in the installation process - leaving PhotoFrame and Photo Tools installed. I do have many panels in CS6 and to my delight after the installation of Suite 8, all the panels in my CS6 were operational and ready to go!
Obviously there was a clash with the Suite 7.5 and 8. Removing Suite 7 worked for me. Initially onOne advised not to uninstall the previous version and just tick the first option to keep both versions. Obviously there was a clash between the version panels.
Hope this helps.

Firefox Home with Search panel does not load/appear. When I click the home icon a message appears that says Firefox is not a valid URL. Never did that before?

Nothing different from the question. Firefox just does not load. When I place the mouse cursor over the home icon and do not click, a message panel seemingly powered by My Yahoo states "drag the AT&T globe to the left of the home icon in the toolbar and drop it there, then select "yes" from the pop up window and you are done." This was an action I did recently (not today) but don't see what this has to do with Firefox

Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

How to handle LabVIEW Error 3: Could not load front panel

I was working on an application, running a vi when the computer turned off. It took me a little time to start the computer again (is not an old computer, is a P4, 1GB, ABIT IG7 MotherBoard). After I unplugged and plugged the Power Unit it was possible to start the computer, before starting, it says that a CPU problem occured and press F1 to continue. Afer press F1 Windows started normally. Then I tried to open the vi in which I was working when the problem occured and LabVIEW says:
LabVIEW: Resource not found.
An error occurred loading the vi.
LabVIEW load error code 3: Could not load front panel.
The question is, can I open my vi someway or I just lost it?
I will really appreciate your answers since I have been working for a long time in this vi.

Well, I'm faced with this problem now. VI started its life as a 9.01 LV 2009/Vision 2009 on a given machine. Copied to another machine wth 7.1, 8.2 and 9.01 on it. Opened with 2009, saved it for 8.0. Opened it with 8.2, saved it for 7.1. Opened it with 7.1//Vision 7.1.1, edited it, saved. File appears to be fine.
Now trying to open it with either 8.2 or 2009 (9.01) fails with error code 3. Note that it still opens with 7.1, so the front panel is there. Anyway to fix this?

Help meee HELP , Network panel is not loading

Hi,
Sorry for my bad english
I've a imac 20" with SL, suddenly when i go in system preference and try to click on netwok preference the system doesn't show me network panel !!!!!!!!!!!!, on the top write network loading but network preference is not loading, the system run correctly not stuck
Please help me
THANK YOU very much

I try to do your solution, but the problem remain ,reinstall combo 1&2 but i have still the same problem.....

LabVIEW error code3: Could not load front panel.

Hi
I am getting second time the "LabVIEW error code3: Could not load front panel." when working with the development environment of LabVIEW 2009 SP1.
It is really annoying as I loose time as I have to revert to saved previously code.
Does anybody know where it may be coming from and how to avoid it?
Thanks
Pawel
Solved!
Go to Solution.

Pawel,
the panel has an origin which you can see in your VI:
Every element will be placed in a position in regard to this origin:
The position has a limit in regard to the bound. I am not sure about the value, but it should be around -35k...35k (or the double of it)....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

My fcp will not load please help!!!

i installed waves plugins for my protools tdm system and some how it has affected my fcp. when i try to load it, fcp stays stuck on loading audio filters. i tried reinstalling fcp, i tried trashing the preference folder and restarting ,but nothing helps. does anyone have any ideas? also itunes and quicktime are not loading i think these problems are related.
[email protected]

The same thing is happening to me on my G4. I don't have any third party plugins. In fact, i have looked in the application support folder and i can't find any audio plugins for FCP. I have reinstalled it several times and everytime i open FCP is stalls during the load menu. It always stalls when it starts loading audio plugins. Sounds like we have the same issue. Hope someone can help. Thanks.

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Vimeo panel not loading on FCP X

Similar Messages

Maybe you are looking for