Vimeo widget player on iphone scroll problem

Hi,
When we put a vimeo player widget into an iphone page, we can't scroll over it with an iphone... the screen jitters up and down if/when you try to get past it vertically...
any ideas very welcome!
cheers
ant

Having the exact same problem, and it happens on both the phone and tablet versions.

Similar Messages

Ipad & iphone scroll problems

A recent find...after installing update 8.0 on both my iPhone 5 and iPad retina, I've had little luck with the scroll area within a page working properly. The entire page moves and the section I want to scroll remains stationary. I had little problem prior to this update.

Solved with update 8.0.2

Quick time Player has encountered a problem and needs to close

Hello,
I am getting this message and it is driving me bonkers!
"quick time Player has encountered a problem and needs to close. We are sorry for the inconvenience".
Am running XP. Have uninstalled all Apple programs (QT, iTunes, update, bonjour, etc and in the order Apple recommends.) I re-installed QuickTime again.
Same Problem.
Went to the control panel and launched the quicktime control panel.
QuickTime Preferences comes up. If i choose the "files type" tab this error comes up in a window:
RUNDLL
An exception occurred while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"
Clicking on this just closes the window.
Some one on another post mentioned something about another codex takinhg the place of an original. How do I find if this is causing it if only to shut down that avenue of conceren?
This has taken up SOOO much time I can't tell you and I can't use my iPhone or iTouch until I get it sorted.
Any help would be much appreciated.
Craigeed
Message was edited by: craigeed
Message was edited by: craigeed

QuickTime Preferences comes up. If i choose the "files type" tab this error comes up in a window:
RUNDLL
An exception occurred while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\Program >Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"
Some one on another post mentioned something about another codex takinhg the place of an original. How do I find if this is causing it if only to shut down that avenue of conceren?
Good work, craigeed. That's enough information (of precisely the right type) to suggest that you don't have a codec pack issue. If you had a codec pack problem, usually you'd get a rundll error if you just tried to open the control panel (and you're getting further in than that). Also, the rundll error for a codec pack problem would indicate that your QuickTime.cpl is lurking in the wrong place (down in the \system32\ directory). Your message is showing that your QuickTime.cpl is in precisely the correct location.
So we'd better start checking on some other possibilities.
The "QuickTime has encountered an error" message is pretty generic, but on at least some versions of QuickTime 7.x it has suggested malware problems. So we'd better try getting that off the table.
Download fresh definitions and run vigorous virus and antispyware scans. If your security software providers offer them, try backing that up with an online virus scan. (That can sometimes pick up an infection even if the security software on the PC has been compromised.)
Do the scans show up any problems? If so, does fixing them help with the QuickTime error?

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

I need a flash player for iphone

i need a flash player for iphone

TallRich wrote:
There is no flash player either for the iPhone or iPad. Why. What are apple going to do to adress the problem.
What problem?
There is no flash player for iphone. it does not exist. This is not a problem. It is simply not a feature.
The iphone also does not have a can opener. This also is not a problem, just not a feature.

How do you fix a scrolling problem on Apple TV?

When I click the remote once, it scrolls to end of row or column. I've restarted via remote, unplugged (restarted), restored to factory default = still have scrolling problem. Tried 2 different remotes, same problem with each. Tried unparring then reparring = no joy.

Update your Adobe Flash player: Adobe Flash Player 16.0.0.305.

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and

I am trying to add the Youtube widget, but I get a black box saying blocked plugin. I have even tried to embed it from Youtube as well and it does the same thing. But when I drag the Vimeo widget over, it connects like it should. What am I doing wrong and how can I fix this problem?

Make sure that both the web browser you're using and its Flash plug-in are up to date. Google Chrome has its own Flash plug-in it updates on its own. Firefox, IE and other have separate plug-ins.

HT6162 IOS 7.1 creates scrolling problem?

Upgraded my UK iPhone 5S 64GB to ios 7.1 yesterday. I have been facing page scrolling problems in all applications (Bloomberg, BBC, Safari, FT, LinkedIn, FaceBook...all applications). The problem is easily reproduced by keeping your finger on the screen when the page to scroll is displayed and moving the finger slowly to scroll the page. The page jumps in direction opposite to the expected.

Hey, I have an iPhone 5 64Gb just updated to iOS 7.1 (11D167) . Various apps all have the same scroll problem. It's amost like 1.5 cm from the the bottom of my screen, an invisable line across the phone where swiping across up or down causes the the normal smooth motion to be jumpy. This has only just happened after the latest iOS update. I have also noticed touch senstivity issues when using the keyboard in some older apps causing key strokes to be missed or even double pressed when only pressing once, and number keys to not work also. My current work around is to type the txt or numbers into notes app, then cut or copy the txt or numbers into the app i'm using. My other work around for the scroll issue, is to use asistive touch and create a scroll gesture.
Hope there is a fix for this soon. I'm not totally convinced this is a hardware issue. it's too coincidental these issues just happend to occur after the latest update. Gone through the normal power cycle, soft reboot holding home button and power button for 10 secs, but makes no difference.
I've turned back on the' automatically send' diagnostics & usage setting in general settings hoping this will contribute to a fix.

How do you initialize audio player on iPhone 5s iOS8?

I am trying to use Scan & Translate and Translate Photo but the error message that says "Unable to initialize audio player" comes up and cannot use those apps.
How do you initialize audio player on iPhone 5s iOS 8?

Ddeveloper has not updated their app since July.
THey need to update to be ios 8 compatible.
the popup you are getting is the app failing to work, not a direction for you to follow.

QuickTime Player has encountered a problem and needs to close. [error]

*Error message:*
QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
*Error signature:*
EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.60.92.0
P3 : 496279cc P4 : QuickTimePlayer.exe P5 : 7.60.92.0 P6 : 496279cc
P7 : 0000130d P8 : c0000409 P9 : 00000000
*Error report content:*
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\QuickTimePlayer.exe.mdmp
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\appcompat.txt
This problem is same as reported here and hasn't been solved:
http://discussions.apple.com/thread.jspa?threadID=1370493&tstart=1397
I have seen this problem appearing on Windows 2000, XP SP2 and XP SP3 with all QuickTime 7 versions (can't tell about iTunes since I don't use it), it didn't bother me because I have no use for QT/MOV myself.
but.
I have just installed your latest QT Player 7.60.92 and it craps out with the same error whenever I want to open .mov files.
And I have downloaded few trailers ranging from small resolution up to highest "HD" resolution from your own Apple website to make sure it is not some encoding compatibility issue.
I know it is a bug in QT Player itself, so don't tell me please that "my QT got fragmented" or such BS (like the replies suggested in the other thread) or ask about any QT alternative corrupting "official" QT Player since I have no such thing. I am trying to make it work on my mother's computer with freshly installed WinXP (prior updated up to latest patches), machine has standard 32bit intel single core CPU (2.8GHz, 2GB of RDRAM).
I am really sorry I bought her camera that take those stupid .mov QT videos.
Apple folks, what's the catch?
With every crash it creates in user temp directory files like:
QuickTimePlayer (2009-03-15 16.06.49).dmp
+ folder like WERf743.dir00 with files inside:
appcompat.txt
manifest.txt
QuickTimePlayer.exe.hdmp
QuickTimePlayer.exe.mdmp
appcompat:
Well, too big to post here (~190kB of text) and anyways it just lists files/versions from what I've seen, so its probably irrevelant
manifest:
Server=watson.microsoft.com
UI LCID=1033
Flags=1674066
Brand=WINDOWS
TitleName=QuickTime Player
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=If you were in the middle of something, the information you were working on might be lost.
Stage1URL=
Stage1URL=/StageOne/Generic/BEX/QuickTimePlayerexe/7_60_92_0/496279cc/QuickTimePlayer_exe/7_60_920/496279cc/0000130d/c0000409/00000000.htm
Stage2URL=
Stage2URL=/dw/GenericTwo.ASP?EventType=BEX&P1=QuickTimePlayer.exe&P2=7.60.92.0&P 3=496279cc&P4=QuickTimePlayer.exe&P5=7.60.92.0&P6=496279cc&P7=0000130d&P8=c00004 09&P9=00000000
DataFiles=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlaye r.exe.mdmp|C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\appcompat.txt
Heap=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlayer.exe .hdmp
ErrorSubPath=Generic\BEX\QuickTimePlayer.exe\7.60.92.0\496279cc\QuickTimePlayer. exe\7.60.92.0\496279cc\0000130d\c0000409\00000000
DirectoryDelete=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00
/edit
Yes, same as in the other thread from year ago, the QT/.mov files play fine in the browsers (I have just check on IE7, Firefox, K-Meleon).
Message was edited by: -888-

Look, I had it running _few times_ too until it crapped out and gives the error since (on my own other computers - which I don't care since I have no use for any QT/.mov myself, but I repeat from post 1: I need it working on my Mother's comp).
And talking about 'bad drivers' - yes, I know that the drivers are sometimes at fault and bad drivers can make entire windoze pc unstable or crash; but how can you suggest this as a cause in this case when I'm telling you that the same error appears on completely different machines? And wouldn't this error appear from begining, from very first use of QT Player if it were bad drivers? Sure it would if it was faulty driver, but since it didn't that's not the case obviously.
Another pointer that it is NOT drivers related problem is that all other audio-video programs work fine, without errors and problem-free on the same machines, including playback of some of the .mov files with Media Player Classic or VLC - while they crap out with QT Player. If it was any of the drivers for audio or video, directx acceleration, etc - the faulty driver(s) should and would affect other programs as well. Yet all of them work fine and as I said - some even play QT files too (the ones capable of).
/edit:
Just to test it I "caved in" and I have installed entire iTunes 8.0 garbage (as suggested by foobula earlier) since I couldn't get just QTPlayer part of it to install separately, and what do you know:
LO & BEHOLD! same .mov files play fine with QT7, no errors, no problem! (I have opened/closed same .mov files many times).
Then I uninstalled iTunes and all of its junk,
removed any traces of it (because it left out - in a Microsft style - plenty of garbage in registry, user appdata folder etc),
rebooted,
installed the "standalone" QT Player 7.60
and hello Apple my darling! - same error is back after just 2 playbacks of very same .mov files!
(I used Apple's own .mov trailers for testing just to make sure I have "right" quicktime files:
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_1080p.mov
and
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_480p.mov
- and I repeat: both played once each fine (haven't play till the end though, but I'm sure that doesn't matter since the problem appears from the start)
What better proof you need that the problem is only with QT Player in a "standalone edition" (or whatever Apple calls it) and not with any drivers etc?
As previously, both play fine when links opened in a browsers (so the QuickTime whatever-components responsible for audio and video rendering WORK FINE and its not any "bad drivers" problems, it is just QT Player application's problem)
Again: (I hate to repeat myself)
*I don't want any itunes or other junk,*
*I just want .mov files to open with quicktime player - no more or less.*
Message was edited by: -888-

How do i add more widgets to my iphone

where can i find some widgets for my iphone? how can i download them and are there free

While you can't add new applications yet (wait for iPhone software 2.0 in June), you CAN make webclips on your iPhone home screen. The link below has lots of webapps. To put one on your homescreen, load it on your iPhone browser, tap the "+" to add a bookmark and choose add to homescreen. Name it and hit ok and it'll be on your homescreen. Enjoy!!!
http://www.apple.com/iphone/webapps/
Lauren

Quicktime player has encountered a problem and needs to close.

Hi, I'm having real problems running QT on my pc. I've tried several combinations eg- 7.02 with Itunes, 7.02 without itunes plus also the last 6.? version.
Each time,the programme is fine until it reboots. Then it is unable to open either programme- bringing up 'Quicktime player has encountered a problem and needs to close' screen.
I'm guessing its quite a common problem but I don't have enough time to trail through all the posts.
Please can someone offer me some advice, Its driving me crazy!
Thanks

Can someone please help me with this??
I can't reinstall quicktime or uninstall
it says i am missing quicktime/installer.msi and then it closes

Cannot run QT: QT player has encountered a problem and needs to close

I have a problem running QT. I keep getting the error message "QT player has encountered a problem and needs to close. Sorry for the inconvenience".
I tried uninstalling and installing again, but that did not work.
Can anyone help me?

I have a problem running QT. I keep getting the error message "QT player has encountered a problem and needs to close. Sorry for the inconvenience".
I tried uninstalling and installing again, but that did not work.
Can anyone help me?

Flash player and Win media player for iphone 3G?

There's any way to download an iphone 3G version of Flash player and Window media player. I am trying to hear a radio station on a web site but need those plugins to hear it. (www.lax.fm)
Please let me know.
Angel
Message was edited by: Mundy KalEl

No. You cannot download or install anything to iphone, unless it is offered in the App Store on itunes.
Adobe does not make a flash player for iphone.

I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
            $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
            $headers .= "X-Priority: 1 (Highest)\n";
            $headers .= "X-MSMail-Priority: High\n";
            $headers .= "Importance: High\n";
            // Additional headers
            $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
            foreach($disemail as $email)
                $to = $email;
                $subject = $succMessage['email_subject'];
                $message = $smsText;
                mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
        if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
        $smsText = utf8_encode($smsText);

i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable";

Vimeo widget player on iphone scroll problem

Similar Messages

Maybe you are looking for