Vintage internal hard drives

I have a mac pro from 2006. This is considered vintage.  the internal hard drive is missing.
I have dealt with several on line shops that give me several different hard drives I can have intalled
but the mac repair shop stated that I had to be sure of which one to purchase because if it
is not the brand that was used originally it could cause a problem & there may be compatibility issues.
Does anyone have any suggestions or knowledge is it a toshiba, seagate, western digital.
HELP.  If not would the computer work fine with just an external hard drive it also needs an operating
system installed.
Thanks

Someone gave you bad information. You can put any 3.5" SATA hard drive in the 2006 MP up to 2TBs per drive. The best drives would be Hitachi. Do not use any "green" drives.
You can install the original OS from the discs that originally came with the computer up through Lion 10.7.5. I would suggest using Snow Leopard.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

Similar Messages

  • How to move an iTunes library from the internal hard drive to another bootable disk.

             I got two Mac OS X installations on my i Mac system. One on the internal hard drive (320 Gb), that has been there since the iMac was bought 3 years ago, upgraded to Lion on 2 August. (call that INT) . I have a USB external drive, and recently bought a firewire Lacie external drive (2Tb), so to boot from there when I can, with hard drive space getting tight this year. I successfully installed another copy of Lion on LACIE.
             Then I went to work to transfer my iTunes library, which the media files were optioned to store on the USB drive. Intending to transfer both the music and video files, and the megadata ( playlists, ratings, playcounts ) I found the media files and the iTunes library file and the .xml document in my iTunes folder from INT. I made a new folder in the USB drive, and copied the contents from the old iTunes folder to that new folder. I re-started in LACIE, and found my empty iTunes folder. I copied over to the new iTunes folder, then opened iTunes. My eyes saw the music library to the same number of items, with the playlists etc showing.
            However, I tried to sync an iPod Nano, and a window came up saying 100 songs could not be copied to the iPod because they could not be found. After ejecting the iPod I tried to play a song from iTunes, and the screen filled with exclamation points. A small window came up, asking for a password to open "sparsebundle" and my name. I entered my password for the administrator's log-in and it said try again with the password. Without knowing what password to put in, I clicked Cancel, and got another small window asking to locate the file. Then clicked Cancel again, not knowing where to search. All the media folders were showing after quitting iTunes and opening Finder .
          I re-booted into INT, and opened iTunes. The library was still there. I synced my iPod again, ejected it, played 3 songs on the iPod, synced again, ejected it again, and opened the playlist "Recently Played". It showed up okay with no problems. So my iTunes library in INT is alright.
          Has anyone got any idea how to make the transfer into LACIE and get it running alright, or what went wrong with what I did ?
          In the meantime I will empty my LACIE iTunes library folder's contents to the trash, and securily empty the trash .

    Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
         What went wrong was perhaps to fail to consolidate the library at first .

  • I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

    I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
    Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

    1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
    2. What's the media 16:9 or 4:3?

  • How do I recover files from an internal hard drive that is no longer recognized?

    Hi there,
    Any help on this problem is greatly appreciated!  I have a MacBook Pro (late 2009) running Snow Leopard.  Over the last few years, after having brought the computer in to get checked, it seems that the RAM cards have gotten loose (or the bottom cover of the computer gets loose) and occasionally a grey curtain will come down from the top of the screen and everything stops working.  Restarting the computer is often fine but sometimes it can't be restarted and I have to take the cover off, reset the RAM cards in their slots, and retighten the cover.  The computer usually works fine after that, but verifying the disk using Disk Utility will sometimes indicate there is an error and the disk needs to be repaired.  Repairing it in Disk Utility is usually fine.
    Last year this happened but the disk could not be repaired. The operating system could still be run, and after making a backup of all my files I reinstalled the operating system from the installation DVD, which didn't delete any of my files on the hard drive anyway.
    A few days ago the same grey curtain issue happened, however upon resetting the RAM and back cover and restarting the computer, the apple logo appeared which was quickly replaced by a prohibitory sign, which stayed on the screen indefinitely.  After putting in the installation DVD and trying to reinstall the operating system, when the option comes up to choose which disk to install OS X on, the internal hard drive does not appear as an option.  Going to Disk Utility from the DVD, the internal hard drive appears on the left but the text is greyed out.  Attempting to repair the disk gives the following error message:
    Checking Journaled HFS Plus volume.
    Invalid key length
    Invalid record count
    Catalog file entry not found for extent
    The volume    could not be verified completely.
    Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    While I know I could completely erase and reformat the disk, I really don't want to lose any of my files (ideally).  If I erase the disk but select "Don't Erase Data" from the "Security Options..." in the "Erase" tab in Disk Utility, will this keep all my files in tact and will I be able to access them later?  Are there third party applications that can recover my files so I can make a back up before I delete and reformat the hard drive?  I am currently running the computer through an external hard drive connected by USB, but the internal hard drive still doesn't show up in Finder (only in Disk Utility as greyed out text).
    Can I recover my files?
    Thanks so much!

    Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
    (117246)

  • I have a late 2012 iMac running osx 10.8.5.  I keep losing access to my internal hard drive.  I can reboot and regain access and it will last for a few minutes or hours.  Disk utility does not seems to help.

    I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive.  I keep losing access to the internal hard drive/startup disk.
    I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive.  The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal.  Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing).  It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

    You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

  • Internal Hard Drives Disappeared, Finder Memory Problem

    Hello Helpful Folks,
    I recently installed an addional internal Hard Drive, and an additional 1GB SDRAM. This worked great for a day, but the next morning, after powering up, system was extremely sluggish, and after much deadline-induced impatient problem solving, has gone from bad to worse (system refuses to acknowledge existence of internal Hard Drives). I apologize in advance for the length of this post, but as
    the devil is in the details, I figure too much info is better than not enough.
    Following is a breakdown of my system: AS IT LAST WORKED; RECENT UPGRADES; and MY LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE. Please don't interpret my all caps as shouting, just trying to organize this post for better clarity.
    System is dedicated to Video Editing with FCP 3, running under OS 9.2.2. System is "off the Grid", i.e. no network, no internet, no printer, no gaming devices. System was purchased new in July 2001, by a friend. At one point I know this system had an Airport card, which was removed prior to my purchase in 2003. I can't remember what else it may have had installed in its history, but here's what it has now:
    SYSTEM AS IT LAST WORKED:
    **bold items are upgrades Original Owner or I installed with no apparent problems**
    Power Mac G4 "Quicksilver" 2001
    867 PowerPC G4, 256 L2, 2MB L3
    -1 Stick "ValueRAM - KVR 133 x 64 C3/512" in PC 133 DIMM slot **
    - "Virtual Memory" was turned off years ago due to conflict with FCP 3
    -2 empty DIMM slots
    -1 60 GB internal HD (Maxtor Ultra ATA/100), 1 partition, formatted HFS+, jumpered as "Master" on Internal ATA 2 ID=0 (which as I understand it is ATA/66 speed)
    -1 Pioneer "Superdrive" DVD-R/W/CD-R/W on Internal ATA 0 ID=0
    -NVIDIA GeForce2 MX with 32MB SDRAM in AGP Slot, feeding a 17" Apple Studio Display.
    -PCI Display Card "formacGA7" - not attached to any external device, not sure what its intended purpose is.**
    -3 Empty PCI Slots
    -OEM Keyboard attached to Monitor's rear USB port.
    -Microsoft 3 Button Wheel mouse with "IntelliEye" (wheel is 3rd Button) connected to Keyboard USB port (right side).**
    -2 OEM FireWire (400) ports
    -2 OEM USB (1) ports
    Peripherals that have worked in various configurations with this system over the past 3 years:
    -3 OWC Mercury Elite ("Oxford Chipset") Externally powered, External FireWire(400) 200GB Hard Drives, 1 partition each, formatted HFS+, daisy-chained to either of the FireWire ports.
    -1 Canon GL1 MiniDV camera, attached either to the other FireWire port, or to the last drive in the chain, depending on my urgency/laziness factor. BTW, FCP 3 has worked flawlessly controlling this Cam for logging and Batch Capturing.
    Applications on System Hard Drive that I have OEM CDs for:
    -OS 9.2 - (I think I remember that OS X was removed from system due to conflicts shortly after original purchase)
    -FCP 3
    -DiskWarrior (version unknown, purchased from Alsoft in 2003)
    -OWC Intech Hard Disk SpeedTools ver 3.5
    Other CDs I have:
    OEM CDs for Power Mac G4:
    -Software Install, OS 9.2, CD vers 1
    -Software Install, OS 10.0.4, CD vers 1
    -Software Restore, OS 9.2 & 10.0.4 CDs vers 1, Discs 1-4 of 4.
    -OEM Apple Hardware Test; Power Mac G4, SW vers 1.2.1
    Applications on system Hard Drive that I don't have CDs for, that I rarely use, but I'd like to keep:
    -After Effects 5.0
    -QuickTime Player 6.0.2
    -Toast Audio Extractor 1.1
    -Toast Titanium 5.0.2
    Applications on system Hard Drive I use if my wife is busy on our Windows XP machine:
    -Photshop 6.0
    -Microsoft Word & Excel
    # of other Applications on System Hard Drive I either don't use or may be integral to the system: 260
    # of Control Panels:
    -Enabled: 34
    -Disabled: 0
    # of Extensions:
    -Enabled: 174
    -Disabled: 0
    note: a number of the applications and extensions are for AOL, Quickbooks, Microsoft Money and the like, as well as other things I don't use (Airport, USB printers, Networking, etc.)
    Smart things I did:
    -Regularly made backup copies of my FCP projects to the external drives.
    -Bought a copy of MacDrive so I can see what's on my External Drives on the XP machine.
    -Printed out System Profile before I installed upgrades.
    -Thoroughly searched this discussion board for and gathered as much info as I could before upgrading.
    Dumb things I did:
    -Made a copy, but not a clone, of my System Folder to one of the external drives when I first got it.
    -Didn't keep any sort of separate log of what's on the External Drives.
    -Never ran any sort of Disk Maintenance, even after one of the Externals crashed (DiskWarrior saved my butt on that).
    -Ignored some of the advice on this discussion board.
    Really dumb thing I did without even realizing it:
    Captured all media for a rush job onto my internal system Hard Drive, as well as storing and using massive jpgs for the same job on that same drive...
    Which led to painfully slow rendering times, and crashes caused by "Error: Out of Memory", which I interpreted as "Must buy more memory" and not "must make sure I'm not trying to edit media stored on system drive, especially with massive jpgs that I should reduce"
    RECENT UPGRADES:
    Here's what I did, and how I did it:
    Turned off system, disconnected all External FireWire Devices, disconnected Monitor, opened case, touched various metal parts of case and power supply to discharge any Static, unplugged power cable.
    -Installed 2 512MB sticks of "Lifetime" PC 133 SDRAM; total System RAM is now 1.5GB, all 3 DIMM slots now occupied.
    -Installed 1 Maxtor "DiamondMax" Ultra ATA/133 100GB Hard Drive (8 MB buffer) as "Slave" (no jumper) in top of U-Carrier above System Hard Drive; attached to middle of original Apple ribbon cable, attached available power plug.
    Taped spare jumper to inside of empty drive bay, noting origin and date. Did NOT push PMU button. Carefully closed case. Reconnected Monitor, did NOT reconnect any FireWire devices. Powered System on, but did NOT perform PRAM reset.
    I don't remember the exact order of what happened next, but I think: System booted up normally, a window popped up saying a new drive had been found, would I like to intitialize it?, which I did as Mac OS extended, and then named. If I was instructed to restart, I did so, otherwise did not. Clicked on "about this Mac" and saw that it now showed 1.5GB RAM. I then went about moving Media/Render files off the System drive (and one of the Externals) onto the Internal Drive, with a combination of FCP's Media Manager, and dragging from the Finder. After files had copied, dragged Media/Render files from System Drive to Trash. Opened FCP project, had FCP re-link to new locations of missing files. Saved, closed, and re-opened project, set Capture/Scratch disc to new internal Drive. At some point I changed FCP's Memory Allocation from whatever it was to 512000KB Minimum, and 900000KB Prefered (and I hope I got all those zeroes right). Did NOT restart after changing Memory Allocation, unless a window popped up instructing me to do so, in which case I did. Re-opened my project, rendered a few thing at a noticeably increased speed, saved everything, emptied the Trash, shut everything down, and called it a night as it was 4:30 am.
    A few hours later, I plugged the MiniDV and an External Drive into the FW ports and powered up the System. It was behaving extremely sluggishly. I would click on something, the pointer would turn into a wristwatch (sometimes with the minute-hand moving, sometimes not) and like an actual minute later, what I'd clicked on would open. All three drives were on the desktop, still had their files, and "About this Mac" still showed 1.5GB total Memory. So I powered down, disconnected the FW devices, waited a bit, and powered back up. Same sluggish response. I tried to open my FCP project file, and instead got a Window that said something to the effect of "The Application associated with this document could not be found". I think I tried to open FCP from the Applications folder on the System Drive and got the same message (I'd only had 3 hours sleep, no coffee, my client had died, and his family was coming for whatever I had in a few hours).
    LAME ATTEMPTS AT PROBLEM SOLVING THAT HAVE MADE THINGS WORSE
    Panic had set in, which never solves anything, so I don't remember what order I performed which tasks, between searching for clues in this forum, and convincing myself that that would be faster than trying to compose a question, waiting for a response, etc.
    The first two things I did, and I can't remember which I did first (both from Keyboard Commands during Restart):
    Rebuild Desktop
    PRAM Reset
    Neither of those solved the problem, so I continued.
    I tried restarting without extensions.
    I would get errors that said something like "Not Enough Memory to Open Finder".
    I tried booting from Disc 1 of the Software Restore Disk, which only wanted to destroy my data.
    I tried booting from the OS 10 disk, with the same result.
    I was finally able to boot from the OS 9.2 Software Install Disk, and actually saw both internal drives on the desktop, and the 1.5GB RAM in About this Mac. I tried to allocate more memory to Finder, but was informed that "Cannot Perform Requested Operation. This operation requires versions above 8.0".
    I think at this point I decided that I must have too many extensions, and started disabling ones I thought irrelevent to my cause (mostly anything that said "AOL", "Airport", "Ethernet", "Printer", "Modem", "Speakable", and a couple things called "Open TPT".
    It gets worse. Then I decided to turn off some "unnecessary" things via the control panels, but somehow managed to disable the control panels themselves: AppleTalk, DialAssist, File Sharing, Modem, Mouse (as I saw that Microsoft Mouse was among the others), Remote Access, Speech, USB Printer Sharing, and possibly TCP/IP.
    That certainly didn't help anything (though upon restarting from the OS 9.2 Disc I was able to see the extensions and control panels in their respective "Disabled" folders in the System Folder). But I still wasn't able to get more Memory to Finder.
    So, I decided a few more PRAM resets might help, which succeeded in making both Internal Hard Drives disappear. I tried booting up from the DiskWarrior disc, but even the Mighty DiskWarrior couldn't find the drives. I performed the longer, in depth version of the Apple Hardware Tools tests, which reported that everything's fine (including the new RAM), but made no mention of the Hard Drives at all. The deadline having long passed, I shut the system down. I read through more posts and tech articles, etc.
    I searched my External drives with MacDrive on my XP, and found the drive that has the copy of my System Folder (which shows all extensions and control panels as enabled); not sure if the Quicksilver will boot from that, I don't know what the Keyboard command for booting from a FireWire drive is (if there is one) and the drive itself only has 900MB of free space.
    I can't find any reference to Internal ATA drives anywhere in the MacDrive documentation; if it was possible I'd put them into the XP, get the files off the Mac drives, reformat them and install OS9 from the Discs.
    This is where I am now:
    The Quick Silver is still powered down. I removed the Microsft mouse and replaced it with the OEM Apple mouse. I opened the case, and removed the PRAM/Backup battery (manufacture date: July 2001). Couldn't find my voltmeter, so took the bat to Radio Shack and bought a new one. Had the Radio Shack guy test the old one: it showed 3.69 volts still. Have not installed the new battery yet. The case is still open, waiting for any advice any of you might have to offer.
    Thank you all so much for your patience in perusing and pursuing this.
    Sincerely,
    Patterson
    Power Mac G4 Quicksilver 867   Mac OS 9.2.x   17" Studio Display, 512MB RAM

    Thank you Rodney and John,
    The jumpers are correct for both Maxtor Drives.
    Rodney, you are correct in that the initial problem (slow rendering/"out of Memory" crashes) was caused by my not realizing I'd stupidly captured several GBs of media to my system drive, and not checking which drives those files were on (as I'd assumed I'd put them on one of my external media drives) once that problem presented itself.
    Before I'd determined what I'd done, I bought the extra RAM. After I'd found the media files on the System Drive, and saw that my dedicated media drives were too full to easily move them, I decided to buy an additional Internal drive so that I could:
    -Move the Media onto it relatively quickly and finish my urgent project.
    -Juggle all my media into a more organized fashion for archiving (as most of my projects are on-going long-term affairs)
    -Wipe it, Partition it, and clone my System Drive onto it, as a spare bootable drive in case my OEM System Drive failed.
    Copying the Media files onto the New Drive and moving the System Drive's Media files into the Trash worked great: huge improvement in Rendering, etc.
    Before shutting down for the night I Emptied the Trash, and was pleased with the amount of space I'd freed up on the System Drive.
    My guess is that the System Drive was terribly fragmented, having been subjected to intense use over the past 5 years without any sort of Drive Maintainence, and deleting that massive amount from it in one shot caused my extreme system sluggishness upon Startup the next day.
    My subsequent lame attempts to solve the sluggishnes ultimately resulted in my losing access to both drives.
    Today, I replaced the Backup Battery, pushed the PMU, re-attached the AC, and Powered Up with the case open as per your suggestion.
    It was trying for a few minutes (the gray screen went black at one point, and then returned to gray) before presenting me with the flashing question mark.
    There was, however, a quiet but distinct "buzzing" sound that would alternate: 1 sec "buzz", one second silence, one second "buzz", one second silence, etc. coming from the drives, even after the "?" appeared.
    I powered down, removed the Ribbon and Power Cables from the new "Slave" drive, and powered up again, with the exact same results.
    I powered down, removed the Ribbon and Power cables from the original "Master" drive, reinstalled the Jumper on the New Drive as "Master", plugged the End of the Ribbon and the Power cables into the New "Master" drive and powered up. The screen went to the "?" within 20 seconds instead of 4+ minutes, and no more "buzzing".
    I put the Apple Hardware Tools Disk in, ran the "long" test, and everything came out fine.
    I have to abandon this for now, but thanks again for your previous advice, and any more you may have!
    Cheers,
    Patterson

  • I am running 10.5.2 from a USB, I need to mount my internal hard drive, can anyone help me?

    Hi everybody. My imac suddenly died on me. It couldn't start, right after the apple sign appeared, an interrogation sign showed. I ran the disk utility, and the problem was that  the internal hard drive was not mounted. I installed the 10.5.2 (the one it came with the imac) in a USB flash drive, which I am running now. Is it possible to mount my internal drive so I can back up my data? (I know  should back my data up regularly, but I didn't). Any help would be greatly appreciated.
    Best regards,
    Alvaro.

    I suspect a failed HD, in that case I'd recommend Apple Hardware Test in Extended Mode at least 3x. You will need the original install discs that shipped with the computer, if you do not have them any longer you will need to order a replacement set from Apple by calling AppleCare. You will need a credit card and the serial number of the machine. The cost should be nominal.

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Can I install an internal hard drive in i-mac intel 17" ?

    Where can I get an internal hard drive compatible for intel i-mac? I need a larger hard drive, like 250gb or something. Can I install it myself?

    You can go to a apple service center like CompUSA and have them install one for you. If you buy the drive from them, they will install it for free, otherwise it is like a 40 dollar charge. DO NOT attempt to install it yourself, not only will you void your warranty, the intel iMac is very difficult to open and work on and you will probably break something.
    Glor

  • IMac G5 Internal Hard Drive Not Recognized

    I shut down my iMac G5 with the power button and not through the typical shutdown procedure once and then when it booted up it would not get past the gray screen. I eventually used the Leopard DVD to try to boot it and was able to get to disk utility to look at the drive. I tried to repair the drive but then the machine froze and I had to restart once more. Now the internal hard drive isn't recognized or seen at all. I actually switched out the SATA hard drive with another spare I had and that was not recognized either. I can get the mac to recognize the installation DVD still so I know my computer still functions properly but I just need it to recognize the drive now. Does anyone have any ideas how to resolve this?

    Have you access to DiskWarrior or TechToolPro? Either of those might fix your problem otherwise, try booting from the Apple Hardware Test on your install disc and see what it says.

  • Safe to delete Lightroom from my internal hard drive?

    Hi
    I shoot in raw and have been using Lightroom for approx 4 years, most recently Lightroom 4 and before that Lightroom 2. Lightroom is taking up a lot of disk space on my internal hard drive and my computer is not happy.
    I have deleted all but a couple of backups and then copied all my Lightroom lrcat files to an external hard drive. Now, Lightroom will only open if I have that external hard drive plugged in. Great! That is what I wanted. Is now safe to delete my Lightroom files from my internal hard drive? I am not that computer savvy and I am also terrified of losing all my work.
    Thanks

    Well, if you have them on a single external drive and you delete them from your internal drive, then you have only one copy left, correct? In that case you are at extreme risk of losing your one and only copy.
    I worked in the disk drive industry for 30 years and have my lrcat files backed up on three hard drives and two USB sticks. Maybe I'm just paranoid but it's likely a hard drive will eventually fail. And based on experience, for some Murphy's law reason they fail most often for people who have not backed up their data.
    I'll bet there is all kinds of other stuff that can be removed from your hard drive, various temporary files, log files, etc. Try a free app like CCleaner (on Windows) to see what it does.
    But I would not have just one copy of my latest lrcat files in existence.

  • How can I browse T.M. backups made BEFORE internal hard drive upgrade?

    Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
    I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
    From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
    Any help is greatly appreciated!

    I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
    Choose "Browse other Time Machine Disks" and you should see the old series of backups.
    ~Lyssa

  • I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on external drive.  I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive.  Is this going be a problem?

    I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on an external drive.  Both drives are backed up on Time Machine.  I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac.  This would save having to transfer several hundred GBs of data.  Will this work using Set Up Assistant?

    Your user account on the new Mac must have a different UID than on the old one.  See the pink box in Problems after using Migration Assistant for an explanation.
    You'll need to change the permissions on the iPhoto library on the external HD.  Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password. 
    Then click the plus sign, select the user account you want on the next screen, and click Select.   Then change Read only to Read & Write for that user via the little arrows.  Finally, click the "gear" icon and select Apply to enclosed items.  That may take a few mintutes on a large library.

  • Can i use seagate goflex 3tb external hard drive for 2010 27" imac internal hard drive replacment if i take it out of the goflex case.do i need to format it before installation due to it allready having goflex software on it from manufacturer.

    i have 3tb seagate goflex external hard drive.its brand new in package.i took it out of case and deleted partitions that were created by manufacturer.so now i have 2800 gigs.its formatted ntfs.will it work for late 2010 27" imac internal hard drive replacement.i found a apple repair place that will charge me 50$ to swap drives for me assuming i have the drive.i will have to install leopard myself at this price.i dont want to have to pay for anything other than the swap.will this hard drive work with this format or do i need to format it differently.

    Hello
    formatted ntfs
    NTFS format not work on mac system , need to be formatted as Extended Mac os Journaled format and partition table need to be GUID
    how to do that in video
    HTH
    Pierre

  • How to connect my MacBook's internal hard drive as an external drive to another computer?

    My MacBook suddenly became extremely slow, so slow that it takes over an hour to display login screen.
    Therefore I'd like to clean our my hard drive but i have a couple things I'd like keep before i do that. It's not possible to transfer these files using Mac so is there a way I can connect Mac internal hard drive as external one via USB to a Windows computer?
    I have a MacBook Pro 2010 17"

    I was actually looking at enclosures butwasn't sure which ones would be suitable. Would something like this work? http://www.amazon.co.uk/gp/aw/d/B00A0HBJLW?cache=76a97cdbbf58eb4ad66ed32bb2668f0 6&pi=SY200_QL40&qid=1408052242&sr=8-2#ref=mp_s_a_1_2

Maybe you are looking for