VIO integration with vRealize - when ?

Hi there,
pretty excited to hear about the general availability of VIO which seems to be the easiest way to expose existing internal VMWare infrastructure resources via a common API. I haven't found any statements though about the integration between vRealize Automation (formerly vCAC) and VIO. Strangely enough, vCAC does still state that it integrates with the Redhat Enterprise OpenStack distro.
anyone has any background info on that ? As we all know, OpenStack is not a "cloud in a box" and to make it enterprise usable, it needs to be plugged into a (commercial) hybrid cloud management platform such as vRealize Automation, RH CloudForms or HP CSA.
thx in advance
Nick

Hi Visu,
To transfer demand forecast generated in APO to ECC as PIR, you are using CIF. You need to have active integration model for PIR in ECC and generated the Distribution Definitions for the appropriate locations with Planned Independent Requirements as the Publ. Type.
Then you can use Transfer from APO as mentioned in the below link
http://help.sap.com/saphelp_scm50/helpdata/en/c9/b4df8870c011d398450000e8a49608/content.htm
You should not need additional master data integration as long as the characteristic value for location (as required in below-mentioned link) maps to corresponding master data in ECC.
http://help.sap.com/saphelp_scm50/helpdata/en/c9/b4df8b70c011d398450000e8a49608/content.htm
Hope this helps.
Thanks,
Somnath

Similar Messages

Bi Publisher integration with SSO when users are in separate containers

Hi,
We have bi publisher 10.1.3.4 installed and setup to run with oas 10.1.3.3. Bi publisher as such works fine.
We need to get it integrated with sso and for that we have followed the steps in the bipub admin&ddeveloper guide, security model section:
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188/T421739T475591.htm#T434695
In our oid users are devided to 3 containers:
l=emea,dc=oracle,dc=com
l=amer,dc=oracle,dc=com
l=apac,dc=oracle,dc=com
If the "Distinguished Name for Users" in bi security configuration it set to e.g.
l=emea,dc=oracle,dc=com
and the admin user is created in the same container l=emea then login works fine for all users in l=emea container. They can login fine and they have the privileges defined in XMLP groups.
However this means any user in l=apac or l=amer container cannot login.
I've therefore created new admin user cn=bipadmin,dc=oracle,dc=com and change the user search base to be dc=oracle,dc=com. Now as the admin bipadmin user I can login fine and have the privileges as defined in XMLP groups.
Actual end users are in the l=emea, l=amer,l=apac containers and with the end users I can still login but the privileges are missing. So e.g. I can login as cn=xx.yy,l=emea,dc=oracle,dc=com or cn=aa.bb,l=amer,dc=oracle,dc=com but even though I've granted those users admin privileges the admin tab is not visible.
Distinguished name for groups has not changed. It has been the same all the time and the XMLP groups exists there:
cn=cappbb,cn=aitsys,cn=Groups,dc=oracle,dc=com.
But it seems if User search base is changed to higher level than where the users actually are the privileges are no longer found.
Is Bi Publisher supposed to search for users only from the container which is defined in the "Distinguished Name for Users" (in this case dc=oracle,dc=com) or is bi publisher supposed to search the users from all the subgroups also under the "Distinguished Name for Users" path?
If anyone has hit the same issue and has fond resolution please let me know.
Thanks!
Nina

Hi Nina,
User privileges will work fine even though the user search base is pointing at the higher level...
In my application I have defined the User search base as,
Distinguished Name for Users : O=ABC
And my users are under, 1. ABC---> Users ---> US ---> and 2. ABC ---> Vendors...
All users could you able to login along with their privileges...
But in your case, i would want you to recheck,the users group/role mapping...
Also check, if not admin role could you able to atleast import other groups/roles mapped to the user when you login...
I mean any functional roles (other than XMLP*) mapped to the users are imported...
thanks..
regards,
dmaze

Session keep Alive when EBS is integrated with OIF acting as SP

We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
Sarbashis

It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM...

Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2

Hello!
This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
and of course we don't want to keep having to reset the profiles.
I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
made no difference.

Ah - solved my own problem.
Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem.

Language determination when WDA application is integrated with Portal

Hi,
How does the language determination work when WDA application is integrated with Portal?
Thanks.
Chitrali

Hi,
Please check out this link -
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
Regards,
Lekha.

How to work in RH9 when project is integrated with TFS and TFS server is down

My RoboHelp 9 project is integrated with TFS/Visual Studio. The server went down yesterday and won't be back up until late today.
If I open the project locally (rather than from Version Control), how do I eventually get the latest files (those that I've worked on locally) into Version Control?
Thank you.

Hi,
I use the following method:
1.       Open the project and disconnect from source control.
2.       Modify any files you need. Be aware that when you add/rename/remove/move files, the RoboHelp control files are modified too. (.apj and .fpj)
3.       When TFS is up, check out the files using team explorer. Do NOT overwrite local files. (Make a backup first.)
4.       Using TFS, check in all modified files. Do NOT check in the XPJ file. If you do, the project will lose its connection with source control.
5.       Thrash the local project.
6.       Get the latest version from the server.
Be aware that this requires that you know what you’re doing. Especially when control files are modified. When you only modify the content of existing topics and check the existing topic in, you should be fine.
Greet,
Willam

Facing issue when LDAPSync is enabled for OIM-AD integration with SSL enabled

Hi
We are performing LDAPSync for OIM AD real time sync.We have done all configuration as per oracle documentation on LDAPSync for OIM 11gR2 : http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm The OIM environment we tested is the latest OIM version OIM 11gR2 PS1 (11.1.2.1.0).
WE have performed LDAPSync enablement on postinstallation of OIM .So we dont have OVD , we have configured libOVD as mentioned in this doc.
We have performed following steps mentioned in this document in our OIM environment.
3.1 Enabling Post installation LDAP Synchronization
3.3 Creating Identity Virtualization Library (libOVD) Adapters and Integrating With Oracle Identity Manager
As attribute like password might be not getting updated in AD from OIM , we have configured SSL enabled integration in LDAP sync as mentioned in above document.
We implemented this step 3.4.1 Enabling SSL Between Identity Virtualization Library (libOVD) and Microsoft Active Directory,
but here it is not properly mentioned that about how to import public key certificate of AD into OIM envirioment for SSL.
We are getting following error message in logs : Looking at logs it looks like the import of AD SSL certificate did not happen properly in OIM environment. But ,we have imported it using keytool and OVD keystore ...please let us know if we are missing any configuration in this process.Above oracle document is not pretty clear on this.
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-40118> <Could not automatically detect binary attribute list: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.JNDIConnectionPool> <OVD-60024> <Connection error: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Error> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-60143> <[#LDAP2] Unable to create connection to ldap://[10.88.164.231]:636 as null.
javax.naming.CommunicationException: simple bind failed: 10.88.164.231:636 [Root exception is javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty]
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:195)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.getHolder(ConnectionHandle.java:415)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.search(ConnectionHandle.java:250)
at oracle.ods.virtualization.engine.backend.jndi.JNDIEntrySet.initialize(JNDIEntrySet.java:219)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.get(BackendJNDI.java:728)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:303)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.usermanagement.UserManagement.get(UserManagement.java:742)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
...more
Caused By: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1731)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1692)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1675)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1601)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:94)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:414)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:387)
at com.sun.jndi.ldap.LdapClient.ldapBind(LdapClient.java:332)
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:190)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
...more
Caused By: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:57)
at sun.security.validator.Validator.getInstance(Validator.java:161)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(X509TrustManagerImpl.java:108)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:204)
at oracle.ods.virtualization.engine.util.OVDTrustManager.checkServerTrusted(OVDTrustManager.java:99)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1198)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:136)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:925)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1170)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:637)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:89)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
Let us know for any helpful pointers on this
Thanks in advance,
RPB25

Use the steps given below to perform import public key certificate of AD into OIM envirioment for SSL
Obtain the AD Certificates from the AD Administrator.
Copy the AD Certificates to the directory /jrockit-jdk1.6.0_20/jre/lib/security
Run the following command to import all the certificates
/jrockit-jdk1.6.0_20/bin/keytool -import -alias <provide_alias> -file <file-name> -keystorecacerts -storepasschangeit
4. The CA certificates are now present in the trust store.

User authentication when OBIEE is integrated with EBS

Hello guys
I have a conceptual question about how OBIEE authentication is performed in an integrated environment with EBS? If the goal is to have users access to OBIEE based on their roles given in EBS, what kind of authentication is it needed for such implementation?
Do I import users and group from EBS database or LDAP server (if its available)? what kind of session variable and ini block is created if I want to do data level secuirty based on user groups?
Please give some basic idea and guidelines on topic
Thank you very much

hi,
the final solution must face and fill your needs....
Bi suite has 3 ways of making-having user-groups...
1.manual
2.ldap
3.from external database
If the goal is to have users access to OBIEE based on their roles given in EBS, what kind of authentication is it needed for such implementation?
-->match the roles from EBS to your liked in OBIEE
check and this,
http://it.toolbox.com/blogs/eye-on-obi/oracle-bi-applications-obiee-security-integration-with-oracle-ebusiness-suite-17246
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Excel integration with Entry and Approval for SSM not working

Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
-          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
-          The browser security is definitely set to accept all active X scripts
-          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
-          Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!

Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob

Jabber cannot Call - Integration with CUCM/AD

Dear all,
I installed CUCM 9.1.1 and CUPS 9.1.1 with Jabber client 9.0.1.
when I run Jabber on a joined domain PC (login with AD username and password), there are no problem with the calling ability.
But when I try to use a non-join domain PC (I am using VPN to connect to office network and using my personal PC), only the chatting feature that are available. I cannot loggin to phone accounts and cannot make any calls with my Jabber client.
Should I use UDS integration with AD?
Thanks,
Hasan

Hi Hasan,
Can you take a look on this thread:
https://supportforums.cisco.com/message/3914353#3914353
If you still have problem connecting, can you try with newer version of Jabber?
Regards,
Srdjan

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Problem in submit button on adobe form integrated with web dynpro

Hello,
I'm facing prob in triggering web dynpro event onSubmit for Interactive form.
I've created a submit button from web dynpro activex pallete on adobe form (integrated with web dynpro) to send the form as email.
Then in the web dynpro view where this form is embedded i have created an action against onSubmit event and called a method within this.
However, on clicking Submit button this event is not getting triggered.
Please let me know what is lacking in this process?
Thanks.

Hi,
I am also facing the same problem. i have developed a simple scenario under which user have to input his/her details and on submit button it will be updated to database.
I have tried the above solution but after adopting this solution all the editable fields become non-editable.
so the above solution is not working for me could you help me out.
I think ... try this....
When you create the Adobe Form from WebDynpro, you need to follow one step in SFP Transaction or inSE80 transaction. Open the Adobe Form in any one the transaction and now in SAP menu bar "Utilities" in that you will find the "INSERT THE WEBDYNPRO SCRIPT" just click on that one. Then you will see a new Script Object is being created with the name "ContainerFoundation_JS" under the "Variables" in the Heirarchy of the Object Pallete of the Adobe Form.
This step is mandatory to use the SUBMIT Button of the "WebDynpro Native", to trigger the OnSubmit event of the WebDynpro.
Thanks
Edited by: shailendra2sap on Mar 6, 2009 12:24 PM

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

VIO integration with vRealize - when ?

Similar Messages

Maybe you are looking for