VIP Access

Would there be a reason for being able to access a VIP on a CSS11501 fron inside a firewall on the same subnet, but not being able to access it beyond the firewall from a client PC off location? The firewall is configured correctly, ports 80,443 are open for HTTP and HTTPS. I have configured a allow all traffic ACL for my VLAN. I can access the service IP's from outside, but not the VIP.
Why is the CSS allowing me access the IP's of the web servers, but not the VIP? Does NATing have anything to do with it?

if you don't have a circuit ip address and no default gateway, that could be a reason.
Gilles.

Similar Messages

  • How can I uninstall Symantec VIP Access Client?

    Hi,
    Soon after getting my new Thinkpad E520 (W7 Home Premium), I uninstalled Norton Antivirus Trial and installed Microsoft Security Essentials.
    But there remains in the Program Files (x86) Folder a Symantec/VIP Access Client program that pops up request for updates.
    It doesn't show in  Add/Remove programs. I would like to know what this program is supposed to do.
    After searching on the web, I downloaded and ran Norton Removal Tool, but VIP Access Client is still there.
    Of course, I could trash the folder and scan the registry to delete as many entries as I can, but I would like to find a more elegant solution ;-)
    Solved!
    Go to Solution.

    https://vipmobile.verisign.com/learnmore.v
    http://www.symantec.com/business/products/support.jsp?pcid=pcat_info_risk_comp&pvid=vip_1
    just so you can see what it is
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Verisign VIP Access app and new iPhone 4 error 20228

    I upgraded to the iPhone 4 from another iPhone and while recently logging into eBay I found out that my VIP app would not work on the new phone. App says " Unable to activate. Try downloading VIP Access again from the App Store. Error Code 20228." I uninstalled the app and re-downloaded it from the App Store to the new phone and get the same error every time I launch it. I tried a Google search and the Verisign support site but came up empty. Any help would be apreciated.
    Note: Once it is working I realize I'll need to update my credentials at each site I use it at as they can not be duplicated. That is not my issue here.

    To add to this, I have downloaded the VIP Access app to my wifes iPhone 4 (which never had this app installed previously)and I get the same error.

  • Safari Doesn't Recognize Symantec VIP Plugin

    Our company uses Symantec VIP for authentication.  I've just installed a fresh instance of Mac OS Mavericks and setting things up.  I've tried to install the Symantec plugin, but Safari doesn't recognize it.  It continually asks me to reinstall, but nothing.  In Firefox it works fine. 
    Any ideas why Safari wouldn't recognize this?  Driving me nuts. 

    Hello Diceman726,
    The latest Symantec VIP Access Desktop for Mac does not install any browser pluggin. You may get the latest VIP Access for free at the link below:
    https://idprotect.vip.symantec.com/
    If this is not the product that you are looking to use, then please share screenshots and more details about the plug-in.
    DETAILS ABOUT VIP ACCES DESKTOP FOR MAC VERSION 1.0.1
    Supported Platforms
    This release of VIP Access for MAC is supported on the MAC OS X 10.5 or higher.
    Installing the VIP Access for MAC
    Complete the following steps to install VIP Access for MAC:
    1. Uninstall the existing VIP Access for MAC application. For more information on uninstalling the existing VIP Access for MAC application, see Uninstalling the VIP Access for MAC
    2. Download the VIP Access.dmg file from the Symantec Web site.
    3. Double-click the VIP Access.dmg file to mount the disk image with the name VIP Access.
    4. Move the VIP Access for MAC application from the disk image to your Applications folder using a drag-and-drop operation. This enables all the users of the system to access the VIP Access for MAC application from their respective Applications folder.
    5. Double-click the VIP Access for MAC application to launch the application.

  • C'mon TPTB we're jut havin' fun.

    i think mac's the best hardware - bar none. some of the threads here a so amusing.... don't lock us out, we wouldn't be here if we didn't care. sometimes i roll around the floor laughing at the cat fights. should be a movie made.
    G4 450DP   Mac OS X (10.4.4)   digidesign, motu, apogee

    By the way, I sensed a bit of hostility in your last message...I thought we were friends? ; {
    None meant....my approach to humor is often subtle and confusing. I didn't mean it in a bad way. Your shorthand just continued to get shorter. : ^) I couldn't understand it. Of all my posts I remember 3 which had poor intentions. So I have good intentions, it just doesn't always seem that way.
    Lately it has been alot of time-dunno why...I am weird
    I point too many faults out to be an Apple employee
    Once I get to level 4 I get VIP access : ^)- really, I have no idea. level 4 is miles from here.
    I am a nerd
    I multitask
    I admitted in another thread to being compulsive : ^)
    Even Rohan says it's addictive
    xs4is said it was like crack (I think)
    Still friends?

  • Illustrator 16.1.0 vs 16.0.1 update

    Hi All ,
    Adobe Illustrator CS6 update is now available !!!
    With Illustrator as the perpetual license you will be updated to 16.0.1 wherein many issues are resolved.
    Please read the release note listing resolved issues.
    http://helpx.adobe.com/illustrator/release-note/illustrator-cs6-0-1-release-notes.html
    However if you have the Illustrator CS6 as the part of the CCM then you will be updated to 16.1.0 , the difference is CCM customers are provided with the 3 new features.
    Package files
    Unembed images
    Links informations
    (For video tutorial :- exclusive-illustrator-updates-available-for-creative-cloud-members )
    along with the all the resolved issues specified in the release note shared above.
    As we said when we launched Creative Cloud earlier this year, one of the biggest benefits for customers would be early access to the latest innovation from Adobe, including VIP access to new features in the desktop software.

    Manish-Sharma wrote:
    Package files
    (For video tutorial :- exclusive-illustrator-updates-available-for-creative-cloud-members )
    As we said when we launched Creative Cloud earlier this year, one of the biggest benefits for customers would be early access to the latest innovation from Adobe, including VIP access to new features in the desktop software.
    Macromedia FreeHand 8.0 released in 1998, added the “Collect for Output” function. Adobe buys Macromedia in 2005, then discontinues Freehand in 2007. In a 2008 interview with Senior Product Manager of Illustrator, Terry Hemphill, he told FreeHand users: “FreeHand is not going to be revived; time to move on, really. The Illustrator team is making a determined effort to bring the best of FreeHand into Illustrator, which should be evident from some of the new features in CS4.”
    I am glad that Adobe finally made a determined effort to bring "Collect for Output" to Illustrator 14 years after Freehand had it and 5 years after Adobe bought Macromedia and rebranded the Freehand Collect for Output ideal as "Package Files". I guess the time was right to start searching for features that could be used as carrots for the creative cloud subscription version to push the whole "get the latest features" benefit ideal via the cloud. But certainly something that was available 14 years ago cant be considered innovative or new, nor a determined effort. Also I believe Code Line's ArtFiles v1 has been around since maybe 2004 or so, so again if a third party can accomplish it then Adobe the actual makers of Illustrator didn't really have an excuse nor are they being very innovative. Also, "Linkes Information" is just an updated version of Freehands "Link Info Dialog" as another dated example.
    However if we finally get to see features from Freehand or elsewhere that have been lacking in Illustrator for years then hey something good may come out of this after all, there are certainly plenty of features to bring from Freehand and elsewhere thats for sure.
    Scott Worthington wrote:
    It will open it without any issues, the underlying technology and bug fixes are the same.
    Thus the features could be pushed to both cloud and non cloud users if Adobe was not unwilling as talked about here...
    http://forums.adobe.com/message/4654150

  • Lenovo ThinkPad T430s - first impressions and issues

    I bought ThinkPad T430s last week and just wanted to write down my thoughts, first impressions and the issues I ran into.
    I am very pleased with the laptop in terms of hardware - solid and nice build quality, understated style and (relatively) light weight. The screen is sharp, sound is good enough for me (I am no audiophile) and I am getting used to the chiclet keyboard - which feels just a little springy.
    But I am not pleased with the software. There is just too much bloatware on the system and some of it is hard to get rid of.
    SugarSync
    Evernote
    Lenovo MyCloud
    VeriSign VIP Access
    Intel AppUp
    and the biggest offender - Lenovo SimpleTap -- You can't get rid of the SimpleTap without uninstalling the individual apps first.
    It would be nice if the system showed a dialog box that said "Hey, here are some cool apps we highly recommend and you may want to look at", instead of pre-installing all these stupid apps.
    On top of that I ran into the Windows updates failing issue.
    So I ended up specnding 4+ hours just to get the system right.
    Lenovo and Microsoft need to understand that they need to deliver an excellent and functional experience to users and not push any stupid system that they have come up with just to make an extra buck.
    Look at Apple products. People love Apple products (I don't, but I do admire them) because of the simple and functional experience they provide.
    In short install just what is necessary. You can let users know that there are other goof programs but leave it up to the users.

    kamaleshp wrote:
    Thanks for your response ThorsHammer.
    In fact that is exactly what I am going to do this weekend.
    I am in the middle of posting another message asking for recommendations and experience on the absolute minimum I can get away with.
    Right now I am thinking Windows 7, System Update and Power Manager.
    In my case, I installed the following:
    Windows 7
    Intel chipset drivers
    Intel WIFI driver (wifi driver only)
    Intel Ethernet driver
    Lenovo Power Management driver
    Lenovo Power Manager
    Optimus video drivers for Intel HD 4000 and NVIDIA 5200M
    RealTek audio driver - I think this also installed Dolby Home Theater v4
    Ricoh Media driver
    Lenovo Ultranav driver
    Webcam driver
    I don't install much more than that.  I like to manually check the download areas for updates so I don't install Lenovo ThinkPad System Update.

  • Client accessing a specific server under a vip ACE Module

    Hi All,
    I have a need to allow QA/developers to check updated appliactions on a particluar server.
    Is there any way on an ACE blade to allow a client to access a particular server under a vip?
    The ACE is configured in Routed mode and the version is A2.3.4.
    Any help or pdf's would be much appreciated.
    Thanks.
    Jack.

    Hi,
    Thanks for the response.
    I have one more query, that I would appreciate some assistance with.
    If I have an exisitng serverfarm with 6 rservers in it, is there any way to direct a specific client to a specific server.
    I understand in one respect that if they are all inservice this may not be possible, but I thought I would ask the question anyway.
    Thanks again for the assistance.
    Jack

  • Accessing Enteprise Manager via Cluster Scan VIP

    Hello all...
    We have a few clusters set up, and we've been accessing Enterprise Manager for these via the cluster scan IP address. For some unknown reason we now cannot access two of the three OEM installations via the scan IP, only by the IP address of the first node. Unfortunately I wasn't involved in this stage of the setup and I'm not having a lot of luck finding docs relevant to this.
    The clusters are running 11.2.0.2 Standard with the January 2012 patch set, and the nodes in the clusters with the issue don't have any problem pinging each other or the scan URL for the custer, if that's helpful.
    Can someone point me in the right direction?
    Thanks,
    Dan
    Edited by: ddenton on Apr 20, 2012 11:11 AM
    Edited by: ddenton on Apr 20, 2012 11:18 AM

    Ravi,
    DB Control was set up independently of the database using "emca".
    The scan name in the emoms.properties file does match up with what's listed when running the "srvctl config scan" command.
    When I attempt to connect to the scan address from Node2 using the following command, I get this response:
    [oracle@devdb2 ~]$ sqlplus username/[email protected]:1521/DEVDB
    SQL Plus: Release 11.2.0.2.0 Production on Mon Apr 23 10:41:00 2012
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    I have no problem tns pinging the scan name or the database name:
    [oracle@devdb2 ~]$ tnsping devdb-scan.rp.db
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 23-APR-2012 10:42:10
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    Used HOSTNAME adapter to resolve the alias
    Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROTOCOL=TCP)(HOST=10.10.10.130)(PORT=1521)))
    OK (0 msec)
    [oracle@devdb2 ~]$ tnsping DEVDB
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 23-APR-2012 10:42:34
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = devdb1-vip.company.com)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = devdb2-vip.company.com)(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVDB.company.com)))
    OK (0 msec)
    Connecting using the following command directly to the TNS name for the database works too, so I'm a bit confused as to why specifying the scan name with port doesn't...
    [oracle@devdb2 ~]$ sqlplus username/password@DEVDB
    SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 23 16:16:40 2012
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
    With the Real Application Clusters and Automatic Storage Management options
    SQL>
    ##################################

  • Problem accessing VIP via HTTP from service servers

    I thought I had a pretty simple config on my CSS11501- but have run into an issue I'm having trouble resolving.
    I have two unix webservers (IPs are .99 and .100) on ports e1 and e2, and my uplink for the CSS is on port e8.
    The CSS has a VIP address (.105) that load balances HTTP requests to .99 and .100.
    From .99 and .100 I can ping the VIP address - and from outside the CSS - almost everything works great for the site I'm hosting on .105.
    I do have two web pages however that attempt to make calls directly to the VIP address - I noticed I can't load those pages.
    Nor can I just browse the website on the VIP address from either of the servers. The webservers can browse their own pages via IP, and each other's pages via IP.
    Just not pages on the VIP.
    I think it may be a case of the servers thinking that IP spoofing is occurring - or maybe I missed something simple in the config.
    Here's what I see in a 'show flows' when I try and browse the VIp address (.105) from the .100 server.
    Src Address SPort Dst Address DPort NAT Dst Address Prt InPort OutPort
    65.207.212.100 53758 65.207.212.105 80 65.207.212.100 TCP e2 e2
    65.207.212.100 80 65.207.212.100 53758 65.207.212.100 TCP e2 e2
    Since it appears that the CSS NATs the request to the same IP the server is using, will the reply from the server ever make it back to the CSS?
    Or does it think that it shouldn't need to reply - becauuse it is that IP?
    Should I be able to browse the VIP site from the webservers.
    Below is the full CSS config if someone can help me figure this out.
    Thanks in advnace for any and all help.
    Paul
    CSS11501# show run
    !Generated on 08/30/2005 12:08:11
    !Active version: sg0750004
    configure
    !*************************** GLOBAL ***************************
    no restrict web-mgmt
    acl enable
    logging subsystem acl level debug-7
    ip route 0.0.0.0 0.0.0.0 65.207.212.1 1
    !************************** CIRCUIT **************************
    circuit VLAN1
    ip address 65.207.212.104 255.255.255.0
    !************************** SERVICE **************************
    service www2
    keepalive type tcp
    keepalive port 80
    ip address 65.207.212.99
    active
    service www3
    keepalive type tcp
    keepalive port 80
    ip address 65.207.212.100
    active
    !*************************** OWNER ***************************
    owner WWW
    content rule1
    vip address 65.207.212.105
    add service www2
    add service www3
    port 80
    protocol tcp
    advanced-balance sticky-srcip-dstport
    active
    !**************************** ACL ****************************
    acl 1
    clause 10 permit any any destination any
    apply circuit-(VLAN1)

    Paul,
    simple config and well-know basic mistake :-)
    If a server tries to access the vip, the css will forward the request to the same server or the other one.
    Both ways, the response from the server will go directly to the client-server, bypassing the CSS.
    For this to work, you need to do client nat so the server making the HTTP connection appears to be coming from the CSS.
    Create a group like this
    group servernat
    vip addr 65.207.212.105
    active
    and add the following to your acl
    clause 5 permit any 65.207.212.99 destination content www/rule1 sourcegroup servernet
    Do a similar clause for the 2nd server.
    re-apply the acl.
    Everything should work now.
    Gilles.
    Thanks for rating.

  • Real Servers not connected to ACE VLAN and Real Servers are clients accessing the VIP

    Hi,
    I have a very strange set up and need some help to get my config working
    I have a ASA firewall with three VLANs
    VLAN 1 = Internet
    VLAN 2 = DMZ
    VLAN 3 = Goes to ACE
    On the ACE I have four VLANs
    VLAN 3 = Goes to ASA
    VALN 4 = Web Server Tier
    VALN 5 = DB Tier
    VALN 6 = VIPs
    Our Application team have asked us to create a New VIP on the ACE with real servers in DMZ (Server A and Server B)
    And they have told us that the cleints accessing the VIP will be Server A and Server B
    I have always created VIPs with real servers directly connected to the ACE but not connected elsewhere.
    I belive I have a big challenge of opening ports on the firewall etc to get this set up working. Also, should i use some sort of NAT / SNAT? 
    Could anyone guide me on this setup please?
    Raj

    Hi Raj,
    First of all it is possible to add servers in ACE which are HOP away from ACE interfaces. Here servers are HOP away but there VIP is part of ACE interface subnet. The only need is that servers return traffic towards client should be passed through ACE (so that ACE can manitain states and chage the source IP of the reply packet from server IP to VIP on which client has requested the connection).
    When servers are HOP away and ACE do not come in path between server and client then we have to to do SNAT for intial client request. This configuration will force the return traffic from server to ACE (as server will NAT IP as client IP).
    In your case DMZ-VIP which is created for two real servers A and B, will be accesses by these servers only. So it is a situation of server accessing there own VIP. For this scenario to work we have to have SNAT (no matter whether servers are directly connected or HOP away). So best solution here is VIP in VLAN 3, Rserevrs for this VIP in DMZ, and SNAT client request, using free IP in VLAN 3.
    Also you have to open ports on firewall for both "real server Probes" and actual application ports, moreover policies modification on firewall for allowing traffic from DMZ to ACE VIP, DMZ to NAT IP and there vice versa traffic.

  • CSM: Is it possible to access IPv4 server farms via IPv6 vIP?

    Dear all
    Before we start a more extensive testing programme I would like to ask the experts whether or not it should be possible to access already existing server farms (with IPv4 vIP) via an additional IPv6 vIP configured on the load balancer.
    The system in question is 6509 with Sup720 and CSM WS-X6066-SLB-APC.
    The idea is simple: Take an existing server farm (running completely on v4) and add an additional v6 vIP on the load balancer without the need to change the actual v4 networking behind the load balancer.
    Might this work (at least for some protocols like http, ftp, etc.)?
    Any "yes" or "no" or "maybe" or "with restrictions" appreciated.;)
    Thanks in advance,
    Grischa

    Fairly sure this isn't possible.  Unless I've missed something, the CSM doesn't support IPv6 at all.  Even if it did, I don't think a v6 VIP to a v4 real would work.  The only place I've seen this work was on a NetScaler, because the NetScaler holds independent connections open to the client and to the servers as a HTTP proxy, passing the request between the two.  I forget how the ACE operates; it may be able to act as a proxy, but don't think it supports v6 either.
    v6 support on CSMs would be totally awesome, but I'm not holding my breath.

  • Iphone 5 WhatsApp Viper Contact Access Problem

    I've got a new Iphone 5 and am trying to set up What'sApp and Viper but cannot get access to my contacts. Under Privacy -> Contacts these applications do not show up for me to allow them access to my contacts. I've already had a look around various support communities to find an answer to the problem and have deleted and reloaded both applications and have also both enabled and disabled restrictions all to no avail. Can anyone help? With thanks, Sandra

    Hi I had this problem too. Simply go to your Mail App. Your VIP mailbox should have a blue circle around a white arrow while your other inboxes have a simple gray arrow. To edit your VIP list click and hold for a bit on the blue arrow and your VIP list will appear. If you click too quick it will just take you straight to your VIP inbox. Hope this helps

  • Access Server through VIP (ACE 4710) but very slow

    Re:  Access Server through VIP (ACE 4710) but very slow
    Hi Shiva
    Kindly  Help .....Accessing the server very slow.., Plz check my real  configuration... this configuration is for application server and after  this i have to configure more serverfarm for different server like  webmail etc. in this ACE 4710. I have only one ACE 4710 .
    ACE Version A4(2.0) = is there supports Probe with this version.???  without probe server will work but very slow. And plz guide Nat-pool is required
    VIP :-- 172.16.15.8
    LB/Admin# sh run
    Generating configuration....
    no ft auto-sync startup-config
    logging enable
    logging host 172.29.91.112 udp/514
    resource-class RC1
      limit-resource all minimum 10.00 maximum unlimited
    boot system image:c4710ace-mz.A4_2_0.bin
    hostname LB
    interface gigabitEthernet 1/1
      description Management
      speed 1000M
      switchport access vlan 1000
      no shutdown
    interface gigabitEthernet 1/2
      description clientside
      switchport access vlan 30
      no shutdown
    interface gigabitEthernet 1/3
      description serverside
      switchport access vlan 31
      no shutdown
    interface gigabitEthernet 1/4
      no shutdown
    context Admin
      description Management
      member RC1
    access-list everyone line 8 extended permit ip any any
    access-list everyone line 16 extended permit icmp any any
    probe http probe1
      description health check
      interval 5
      passdetect interval 10
      request method head
      expect status 200 200
      open 1
    rserver redirect https_redirect
      description redirect traffic to https
      webhost-redirection / 302
      inservice
    rserver redirect maintenance_page
      description maintenance page displayed
      webhost-redirection /sry.html 301
      inservice
    rserver host web1
      ip address 192.168.10.3
      inservice
    rserver host web2
      ip address 192.168.10.4
      inservice
    rserver host web3
      ip address 192.168.10.5
      inservice
    serverfarm host http
      rserver web1
        inservice
      rserver web2
        inservice
      rserver web3
        inservice
    serverfarm redirect https_redirect_farm
      description Redirect traffic to https
    serverfarm redirect maintenance_farm
      description send user to maintenance page
    parameter-map type connection paramap_http
      description parameter connection tcp
      exceed-mss allow
    sticky ip-netmask 255.255.255.0 address source Sticky_http
      timeout activeconns
      serverfarm http
    class-map match-all REMOTE-ACCESS
    class-map type management match-any remote_access
      2 match protocol xml-https any
      3 match protocol icmp any
      4 match protocol telnet any
      5 match protocol ssh any
      6 match protocol http any
      7 match protocol https any
      8 match protocol snmp any
    class-map match-all slb-vip
      2 match virtual-address 172.16.15.8 tcp eq www
    policy-map type management first-match remote_access
      class class-default
        permit
    policy-map type management first-match remote_mgmt_allow_policy
      class remote_access
        permit
    policy-map type loadbalance first-match slb
      class class-default
        serverfarm http
    policy-map type inspect http all-match slb-vip-http
      class class-default
        permit
    policy-map multi-match client-vips
      class slb-vip
        loadbalance vip inservice
        loadbalance policy slb
        loadbalance vip icmp-reply active
        inspect http policy slb-vip-http
        connection advanced-options paramap_http
    interface vlan 30
      description "Client Side"
      ip address 172.16.15.24 255.255.255.0
      access-group input everyone
      service-policy input client-vips
      no shutdown
    interface vlan 31
      description "Server Side"
      ip address 192.168.10.1 255.255.255.0
      service-policy input remote_access
      no shutdown
    interface vlan 1000
      description managment
      ip address 172.29.91.110 255.255.255.0
      service-policy input remote_mgmt_allow_policy
      no shutdown
    ip route 0.0.0.0 0.0.0.0 172.16.15.1
    snmp-server contact "PHQ"
    snmp-server community phq group Network-Monitor
    snmp-server trap-source vlan 1000
    username admin password 5 $1$b2txbc5U$TA74D920oSdd2eOZ4hSFe/  role Admin domain
    default-domain
    username www password 5 $1$.GuWwQEK$r8Ub4OcE3l190d5GA4kvR.  role Admin domain de
    fault-domain
    username prem password 5 $1$8C7eRKrI$it3UV4URZ26X4S/Bh6OEr0  role Admin domain d
    efault-domain
    ssh key rsa 1024 force
    banner motd # "ro" #
    Regards,
    Prem

    Hi Shiva,
    plz guide i'm new with ACE LB, also find my n/w design for connected ace to server. but server accessing very very slow, but when i connect through my old server software LB (with two interface)then accessing very fast. I just replace my old serverLB(with two interface) to ACE4710 and connect the same scenario then why not server accessing smoothly with VIP .Reply soon only I connect ACE's two interface with switch.....
    Regards,
    Prem

  • VIP selection will not work on contact with multiple email addresses

    Trying to add more people to my VIP list. When selecting a name that has multiple email addresses, I select the address I want added and selection will not "stick" or accept that contact to VIP list.
    Help?

    Hiya!
     Well first off... I'm baffled that you succeeded in setting up personal email without a data plan.
    You need a data plan to access the BIS network which allows you web browsing (off wifi), email, BBM and the like.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

Maybe you are looking for