VIP Failed:CheckResource error for ora.nrac1.vip error code = 1
Hi all, the VIP on node1 Fail-over to node2 and the VIP log like this:
CRSAPP][191] CheckResource error for ora.nrac1.vip error code = 1
CRSRES][191] In stateChanged, ora.nrac1.vip target is ONLINE
CRSRES][191] ora.nrac1.vip on nrac1 went OFFLINE unexpectedly
CRSRES][191] StopResource: setting CLI values
CRSRES][191] Attempting to stop `ora.nrac1.vip` on member `nrac1`
CRSRES][191] Stop of `ora.nrac1.vip` on member `nrac1` succeeded.
CRSRES][191] ora.nrac1.vip RESTART_COUNT=0 RESTART_ATTEMPTS=0
CRSRES][191] ora.nrac1.vip failed on nrac1 relocating.
CRSRES][191] Attempting to start `ora.nrac1.vip` on member `nrac2`
CRSRES][191] Start of `ora.nrac1.vip` on member `nrac2` succeeded.
and how to fix it? the ce0 seems work right.
1.use crt_stat -v find OFFLINE name
2.use crs_start name
Similar Messages
-
Failed while scanning for CD/DVD drives, error 2355
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help???Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
As far as I know I do NOT have a virtual drive on this pc.
Any help??? -
Unable to burn CDs using i tunes. Have run diognostics. Summary:- i tunes not running in safe mode.
Invalid lower filters registry value.
Failed while scanning for CD/DVD drives, error 2500
Please help.That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you. -
ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set_nls.
this error generates everytime when i run a apex application
i did call the package in session state with dbms_session.set_nls('NLS_LANGUAGE','AMERICAN'); but still it shows the error in the report any solution pleaseHi Amrit
Can you put the FND_GLOBAL calls in a pre map trigger/process rather than as part of the map?
Cheers
David -
Please help for ORA-02049 - Timeout error
Hi All,
we have got a reporting DB and 14+ Application DBs, the data is extracted from all the application databases (DBs) and dumped into the common tables of reporting database. While inserting and updating the common reporting tables the other jobs gets timeout error and fails. We daily face this failure problem (error: ORA-02049 - Timeout error distributed transaction waiting for lock) for almost 10-15 times.
Can you please help me out in resolving and getting the permanent solution for this problem.
Thanks in advance.Thanks Kamal,
as mentioned above, I have got Oracle,Java,Unix environment. Autosys jobs are scheduled through out the day.
Mechanism : Autosys job triggers the action at specified time, Unix code calls oracle packaged procedure, extracts data and puts into the common reporting table from this data java code formats the report output.
There are separate reporting jobs for all instances though the report is same but for different locations(14 DB instances).
and all these reporting jobs dump data into common reporting table, data can be differentiated on the hub or location.
But if one job is running for first instance then second job waits for the lock and fails after 2 mins.
I have to avoid this situation, I hold I am able to explain the situation. -
In my Production DataBase , I am getting ORA-600 error in Alert log file.
Already , i have applied the patch 10.2.0.4.0.
Still, the database is throwing that error.
What is the reason for this error and how to resolvw this error?
Following is the alert log file error?
Wed Jul 16 10:33:30 2008
Errors in file e:\oracle\admin\udump\rbidev_ora_640.trc:
ORA-00600: internal error code, arguments: [kkslpco-peek], [], [], [], [], [], [], []
Wed Jul 16 10:33:37 2008
Errors in file e:\oracle\admin\udump\rbidev_ora_640.trc:
ORA-00600: internal error code, arguments: [kkslpco-peek], [], [], [], [], [], [], []
Wed Jul 16 14:12:45 2008
Errors in file e:\oracle\admin\udump\rbidev_ora_7960.trc:
ORA-00600: internal error code, arguments: [kkslpco-peek], [], [], [], [], [], [], []hi
this is a generic error
search in metalink...
and if not Raise a SR suggested to you ........
CHeers -
hi
When I run report in rsrt it is throwing me following error..
Messages:
ORA-01114: IO error writing block to file (block # )
SQL Error: 1114
Error while reading data; navigation is possible
>> Row: 71 Inc: NEXT_PACKAGE Prog: CL_SQL_RESULT_SET
we have tried all the options
increased the table space of temp files but still the issue is not resolved
one thing we have observed is
1 case which we are seeing (not sure if this is only because of the below case)
we see this error specifically when we run query on our infocube ZWBS_C11 (CUSTOMIZED CUBE) which has MANDATORY VARIABLE ON 0PROJECT
do this variable has anything to do with the error..
because in other cases where we have like 5 reports on same infocube..
we dont see this error in other 2 cases where we dont have this mandatory variable on project
also we see this error in several other cases like when we are doing compression of info cube zic_c03
absolutely no clue of why this is happening..and when this is happening
RegardsHi,
This issue is related Oracle database issue, check with Basis/Dba team. Oce they resolved you can run the report with selections.
If you know the table name you can check in SE14 (Data base Utility) and adjust the table. Some times it will work out.
Hope it helps you.
Riyez -
I/O Error for TEXT VBBP ----- TD607 Error
Hi Gurus,
We have activated the BADI CFOP_DET_PREP in the Delivery Program.
When I am going to VL02N and trying to update the Partner Functions in the Delivery Document then the system is giving the error as shown below
i was unable to find the reason for this error.......
PERFORMANCE ASSISTANT
I/O error for text VBBP 0080000005000010 ZTX6 EN
Message no. TD607
Diagnosis
You want to read a text from the database, delete it, or save it to the database.
System Response
An error occurred when the database was accessed.
Procedure
Try repeating the procedure. If the error recurs, contact your system administrator.
The above one is the error that it was showing me.
Can anyone please tell me the reason for the Error and also the possible solution in this situation.
Thanks in Advance,
Rakesh Tummala.
Edited by: Rakesh Tummala on Sep 24, 2010 2:34 PMNormally, if SAP is unable to update or read any text at either header (Table STXH) level or item (PSTXH) level, it will throw this error.
So you have to check these tables and find out the root cause of which text is creating problem.
thanks
G. Lakshmipathi -
QuickTime fails to initialize for non-admin users (Error 63441)
I have installed iTunes 6.0.4 (including QuickTime 7.0.4) on my XP PC. iTunes and QuickTime work fine for the Admin users, but not for non-Admin accounts.
iTunes crashes with the generic Microsoft 'send error report' message; QuickTime gives "QuickTime failed to initialize. Error # 63441".
Any help / suggestions appreciated.Eventually fixed it!
As mentioned in numerous other posts this came down to an issue with registry keys.
Updated the permissions for HKEYLOCALMACHINE\SOFTWARE\Apple Computer, Inc.\QuickTime to give 'Full Control' to 'Everyone'.
Initially had a lot of difficulty accessing the Apple Computer, Inc. branch - kept getting 'access denied'. This turned out to be because there was no owner set for the key. Once I had made myself owner I was able to make the other changes. -
BAPI_GOODSMVT_CREATE - error for movement type 343 (movement code - 04)
Hi Gurus,
I am using BAPI_GOODSMVT_CREATE for doing transfer posting MB1B.
I need to do transfer posting using movement type - 343 "Blocked to Unrestricted stock"
Movement type - 343
GOODSMVT_CODE - 04 (transfer posintg)
I am getting error message -
E /CWM/MM 001 Transfer the parallel entry quantity/entry unit of measure
Help me with some pointers.
Thanks,
MadanRajesh,
Here is my code for line items:
MATERIAL 100001374
PLANT 1AAE
STGE_LOC B100
BATCH 0111331309
MOVE_TYPE 343
ENTRY_QNT 10.000
ENTRY_UOM EA
Let me know should I need to fill any other fields.
Thanks,
Madan -
Error for Billing Document- saved(Error in account determination)
Dear all,
When i am trying to creat the billing document , it is saving with error in account .
Can any body tell me the reason for this error.Actually i have maintained the required GL accounts in VKOA.
9011000024 000000 Document 9011000024 saved (error in account determination)
Technical data
Tech. data details
Client
Group Number
Sales Document Number 9011000024
Item Number of the SD Document 000000
Schedule Line Number 0051
Counter in Control Tables 00
Message Identification VF
System Message Number 051
Output Type E
Message Variable 01 9011000024
Message Variable 02
Message Variable 03
Message Variable 04
Group Type
Thanks In Advance
ParagHi
Put the billing doc in change mode and then enter
From the top menu bar-environment-account determination analysis---revenue account determination
If you explore that system will give some hint of what is missing?
Check in CMR whether account assignment category is mainatained in Billing tab of sales area data
Check in MMR whether account assignment category is mainatained in sales org data2 tab
Ensure that VKOA settings are correct?
Then go VF02 and click on the green flag in the initial screen or shift+F4
All the best
Regards
raja -
I'll be in a forum on a website and be fine for like 2 minutes then it will boot me and give that error.
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
Error for visual ADF from xml code behind
Hello all:
I am a freshman to use Jdeveloper 10.1.3.1.
When I was using faces-config.xml to create JSP and JSPX page, the ADF component control suddenly diplayed abnormally, Only to show the tagbox like form, html, head, body and so on in Design view, sometimes even nothing to display,.But when I restart jdeveloper, some page would be OK again, others still can not be show normally. I checked the code behind the page.there is nothing wrong, because these codes are all auto-created.
Thanks to advance
Bonnie([email protected])I have solved this problem.
Because I added a filter into web.xml. It seemed that this would be complied while in design model. After I removed it, it's OK! -
Import failing with ORA-20001: GET_BLOCK Error
Hi All,
I'm attempting to install an export of our Application into the LIVE environment (something I've done many times before), and it's failing with the following error message: -
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 698, column 1: PLS-00103: Encountered the symbol ",'#DD#','#EE#');" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_
The only part of the message that makes any sense to me is the '#DD#','#EE#' which looks like part of a Javascript Passback Function from one of the pages.
Can anyone throw any light on why I'm getting this error message?
Thanks,
MikeScott,
I managed to track down the error. A column link URL I'm using calls a Javascript Passback Function as follows: -
javascript:passBack('#A#','#B#','#C#','#D#','#E#','#F#','#G#','#H#','#I#','#J#','#K#','#L#','#M#','#N#','#O#','#P#','#Q#','#R#','#S#','#T#','#U#','#W#','#X#','#Y#','#Z#','#AA#','#BB#','#CC#','#DD#','#EE#');
By reducing the length of this the import now works. The confusing part is that this was working previously.
Cheers,
Mike -
Urgent: Error: Client routine fdpvwr failed to prepare for file transfer
Hi Recently i have upgraded developer 6i by applying patches.
After when i am trying to submit active users and active responsibilities.
Those also getting completed
But when i am trying to click button view output or view log
I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
Can anybody tell me what is the issue. Waiting for your reply
GaneshI am getting error as "Client routine fdpvwr failed to prepare for file transfer"
The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1
Maybe you are looking for
-
My ipod was stolen and i want to get it back but it says i cant track it can someone please help me
please help me
-
Trojan, possibly mackeeper, on macbook air and can't get rid of it
So I accidentally downloaded a file that would allow me to watch a video because "mine was out of date" or something, not Adobe, and wasn't really paying attention and realized that I download it and when I thought i was deleting it I realized I inst
-
Probably a simple question but how do I set my phone up so that I can watch videos on my tv? Do I need apples special cables?
-
LR4.4 and now LR5 does not display photos in filmstrip or Library module
I have been using LR4.4 and now upgraded to 5. My only problem has been neither versions display the photos in filmstrip or the Library module after being imported. It displays blank frames and you can click on one in Develop and it will show the pho
-
Mouse flickering on top of brush point in Photoshop CS4...
Recently the mouse has started flickering and not lining up with brushes when I'm editing photos in Photoshop CS4. When I use a brush, the mouse arrow will appear, flickering overtop of where the brush point is (the brush point flickers too when I mo