VIP for Oracle 10g R2 RAC
Hi All,
I have a doubt, We are installing 10g R2 2-node RAC on RHEL4 U4. Can we have same IP address for VIP for both the nodes?
Thanks,
Praveen.
Thanks for the response..
Ok, i'll have unique IP addresses for VIP.
Thanks
Praveen
Similar Messages
-
Configuring udev rules for Oracle 10g R2 Rac on OEL 5.5 U4 with Qnap
I'm trying to setup a 10g RAC Cluster following the guide by Jeff Hunter on http://www.idevelopment.info/
I have to admit, im no Linux admin, and have searched round the net for help with the following Issue.
I'm trying to set my iSCSI targets to have persistent mappings using udev rules
This is what I have done so far
[root@racnode1 Server]# iscsiadm -m discovery -t sendtargets -p nas-priv | grep 192.168.2.196
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d
192.168.2.196:3260,1 iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d
-- Manually Log into iSCSI Targets
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 -l
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 -l
-- Make iSCSI Targets Automatically Login
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
iscsiadm -m node -T iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d -p 192.168.2.196 --op update -n node.startup -v automatic
-- Create Persistent Local SCSI Device Names
- Identify Mappings
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l qnap | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdd
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sde
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdh
- Create Rules File
cat >> /etc/udev/rules.d/55-openiscsi.rules <<EOF
# /etc/udev/rules.d/55-openiscsi.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM="/etc/udev/scripts/iscsidev.sh %b",SYMLINK+="iscsi/%c/part%n"
EOF
- Create Shell Script
mkdir -p /etc/udev/scripts
vi /etc/udev/scripts/iscsidev.sh
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
chmod 755 /etc/udev/scripts/iscsidev.sh
service iscsi stop
service iscsi start
[root@racnode1 ~]# ls /dev/iscsi/*
ls: /dev/iscsi/*: No such file or directory
1.) For some reason I cannot get the mappings to work correctly, I have rebooted the server and tried a number of different changes in the rules script. But for the life of me I cannot get it work.
I noticed when I rebooted the server that it failed to execute the iscsidev. When I manually run the shell script with a parameter it produces output
Can anyone help me to get this up and running?
2.) My QNAP Nas doesnt seem to publish iSCSI targets to only one NIC. I think this is down to the firmware/feature not being available. When I discover targets I get the following
[root@racnode1 ~]# (cd /dev/disk/by-path; ls -l *qnap* | awk '{FS=" "; print $9 " " $10 " " $11}')
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdh
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdm
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdn
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sde
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sdr
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdd
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdb
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdk
ip-192.168.1.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdp
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs1.c59a2d-lun-0 -> ../../sdi
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbcrs2.c59a2d-lun-0 -> ../../sdg
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata1.c59a2d-lun-0 -> ../../sdo
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbdata2.c59a2d-lun-0 -> ../../sdj
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra1.c59a2d-lun-0 -> ../../sds
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbfra2.c59a2d-lun-0 -> ../../sdf
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote1.c59a2d-lun-0 -> ../../sdc
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote2.c59a2d-lun-0 -> ../../sdl
ip-192.168.2.196:3260-iscsi-iqn.2004-04.com.qnap:ts-459:iscsi.racdbvote3.c59a2d-lun-0 -> ../../sdq
It shows the same targets on both NIC's, I only need them on the private ip 192.168.2.196
Edited by: user1728822 on 07-May-2011 15:53
Edited by: user1728822 on 07-May-2011 16:08Hi,
I'm facing the same issue.. If your issue is fixed..could you please let me know?
I'm trying to configure 11g RAC with OPenfiler and got stuck here.
Regards,
Kumar -
Suitable Processor for Oracle 10g
Hi All ,
Currently, Our Oracle 10g with RAC (Real Application Cluster) is running in the Server Sun Fire V240 (SUNW,UltraSPARC-IIIi) with 4GB of RAM.
We have an idea to upgrade the processor. Please give me your suggestion, which processor is best for Oracle 10G with RAC.
I am awaiting for your response.
Regards,
R. Rajesh Kannan.It would depend on the load. How many people using it, and what are they all doing.
-
Enable autoarchiving for Oracle 10g RAC db
Hello
What are the steps to enable autoarchiving for Oracle 10g cluster database?
It is currentrly in noarchivelog mode.
Thank you,
YelenaHi.
I think that this has been improved in 10g, so that we can do an exclusive mount on any database in a RAC without setting cluster_database to false. Also the parameter log_archive_start has been depreciated so the steps is simply (assuming that you by default wants to use db_recovery_file_dest to store archived redo logs)
1) Shutdown immediate (instance 1)
2) Startup mount
3) Alter database archivelog
4) Alter database open
Repeat this sequence for all nodes in the RAC.
And the best is to leave the log_archive_format by it's default value, to ensure that the incarnation of the database is represented in the archive log name.
(On 10g, backupsets and archivelogs are usable beyond different reincarnation of a database, so there is a good change that S% or s% will repeat itself after an open resetlogs).
Hopes this might help you.
Good Luck
Rgds
Kjell Ove -
Issues while installing ORACLE 10g R2 RAC on RHEL 5.3
i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2053 16386300 8e Linux LVM
/dev/sda3 2054 2372 2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 10016 10256368 83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 10048 10289136 83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 10048 10289136 83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 10080 10321904 83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 10016 10256368 83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done -
Best guide or tutorial for oracle 10 g rac on vmware ?
hi,
can any one tell me best guide ,notes or Tutorial for oracle 10 g rac on vmware ?
Regards,
A.AnwarA. Anwar wrote:
hi,
can any one tell me best guide ,notes or Tutorial for oracle 10 g rac on vmware ?
Regards,
A.Anwarrefer for installation:- http://oracleinstance.blogspot.in/2010/03/oracle-10g-installation-in-linux-5.html
http://www.databasejournal.com/article.php/3559996/Tarry-Singh.htm
Tutorial:- oracle documentation is the best best guide
refer:- Oracle® Database 2 Day + Real Application Clusters Guide
http://docs.oracle.com/cd/B19306_01/rac.102/b28759/toc.htm(2 day RAC DBA)
http://docs.oracle.com/cd/B19306_01/rac.102/b14197/toc.htm(Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide)
regards,
Rajesh -
How to upgade Oracle from 9.2 on SUN to Oracle 10g R2 RAC on Oracle EL4
Hi all,
I have production database Oracle 9i EE Release 9.2.0.5.0 - 64bit on SunOS 5.9 cca 100GB. I would like to upgrade Oracle 10g Relase2 RAC with 2 nodes on Oracle Enterprise Linux. Database availability is 24x7 and system breakdown must be minimal. Upgrade could be done in several independent steps. What is the best form of upgrade realisation?
Thx for some idea
Libor Veverka
[email protected]My 2 cents:
1. de-RAC 9i on solaris
2. upgrade to 10g on solaris (why? take advantage of datapump, much faster than exp/imp)
3. expdp from 10g solaris
4. create single instance 10g on linux
5. impdp on linux
Please note there are a number of issues with 9ir2.10gr2 upgrade (check metalink for details).
HTH,
[email protected] -
Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Hi Friends,
Please provide the document to Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Cluster : Local Disk
OCR and Voting Disk : OCFS2
DB Home : Local
DBF Files and FRA : ASM
Please let me know how to create OCFS2 and ASM Volumes for RAW Disks (SAN Lun's)
Regards,
DBYou can refer below
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
http://www.oracledba.org/10gR2/Pre_Install_10gR2.html
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=9&ved=0CHUQFjAI&url=http%3A%2F%2Fcommunities.vmware.com%2Fservlet%2FJiveServlet%2FdownloadBody%2F12534-102-1-13254%2F10gR2%2520RAC%2520INSTALLATION%2520IN%2520LUNX5.pdf&ei=71A5T-jrM8jMiQLihOS_Cg&usg=AFQjCNGnBrzhvm3j9PuPNy4FLJuaxetS1A&sig2=0b8VnMefcXueFUu44-66yQ
Hope this helps,
Regards
http://www.oracleracexpert.com -
Hi all,
I am searching for doc on Oracle 10G on RAC.Please send me the related link.
Thanks in advance
VipinLook into this URL for Oracle Documentations on Oracle 10g RAC.
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Fore more related links, take a look at the following link.
http://syedracdba.wordpress.com/2008/03/24/list-of-useful-links-for-oracle-rac/
Regards,
Sabdar Syed, -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM -
Oracle gateway for Oracle 10g DB on Windows 64 bit server
Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.
yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database? -
Long-term retention backup strategy for Oracle 10g
Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advanceHello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM -
Note 830576 - Parameter recommendations for Oracle 10g
hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards, -
Can't Create the ODBC connection for Oracle 10g
Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?
Maybe you are looking for
-
Hi, any one can help in this issue. i am not getting the raw materila cost & manfacture conversion cost for for the bom of FG - SFG - SFG - SFG- RAW FG - finished goods, SFG - semi finished goods RAW - raw material. plz provide the solution. raw mat
-
In "save as"-dialogues, : (colon) turns into - (hyphen)?
ahoi. in all "save as"-dialogues in os x 10.8, i cant use a : (colon) as character in the filename; instead it turns into a - (hyphen). is this wanted by apple? or am i the only one with this "problem"? i changed nothing in the settings...
-
When i print my photos are not centered on the sheet, what am I doing wrong
When I print my pictures they are centered on my sheet. I have a HP J6450 Officejet. Are there settings that I have not set up right. I use Photoshop CS4. Hope there is someone that can help me. Dennis
-
Best way to transfer csv or excel file ??
Hi Can anyone recommend the best way for a customer emailing a csv or excel file to me - how can i guarantee it came from them and hasn't been tampered with. This file is generated from the application i develped if this helps. Have looked at public
-
How do I add my logo into my signature
How do I add my company logo into my email?