VIP is not responding When pinging from ace

hey i have a very strange type of error. everything was working fine untill it just stopped. i have two vips both were mounted and working fine and then one of the vip just stopped working you can ping and get reply from my pc but not from ace. they are connected directly with nexus 5k and was working fine. now you can have reply from for other vips and servers and all other thing but not that single vip. when you ping it on nexus you get DUP; Packets which is not understood by me there is all commands like no ip redirects are been given but i dont know wats rong.
can some1 have any idea and help ?

Hi Usman,
Not sure about DUP packets that you see on nexus but from ACE's perspective we need to see what is wrong and for that i would need to look at your configuration and other outputs. Do you see that your client's request is reaching the ACE VIP ? You can check using "show conn address " and see if you see a corresponding backend connection or not. Do you see any handshake failures or any other counters increasing under "show stats crypto server" command? We need to have more information for us to look at to tell you what is going on at least from ACE's viewpoint.
Regards,
Kanwal

Similar Messages

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • All applications are not responding when wake from sleep.

    All applications are not responding when Macbook pro wake from sleep,
    the keyboard and touch pad are okay.
    Why?
    Thanks a lot.

    I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
    If it does not, that means one of those services that was disabled, is causing the issue.
    If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware. 
    Here are the steps to disable non-critical services:
    Windows + Q to bring up Search
    Type 'msconfig' and press Enter
    Click the Services Tab
    Check the Hide All Microsoft Services box 
    Click the Disable All button 
    Click Apply and Restart
    Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
    Let me know the results when you get a chance, please

  • Quicktime 7 not responding when updated from QT6

    To any out there who've heard about this problem, please tell me what I'm doing wrong. QT7 looks amazing and I wanted in but I don't seem to have the right setup?!
    After I restart from the download and attempt to play anything from Apple's QT site, QT opens but no window comes up and the dock shows it's active (the little black triangle). I click and hold the QT icon to Force Quit and I notice that at the top of the menu it states "Not responding". I can successfully quit but upon successive restarts and re-attempts to play anything in QT7 it does the same thing. I've tried updating to QT7 three times now with each new update hoping this problem is resolved but to no avail.
    This also seems to affect my iTunes, doing the same thing to that app as well. No other apps seem to be affected and the QT plugin for Safari works. I don't have QT Pro and I'm running a MIDI rig with a MOTU MTP/AV through the Geethree Serial adapter plus a firewire MOTU 896 and ProTools Audiomedia 3 card. Anybody else going through this and found a fix?

    Hi
    Here is a protools/itunes/quicktime solution I found. It worked for me!
    "Basically the problem has been that the new Quicktime freezes, and takes ITunes with it, when you also have Pro Tools loaded on OSX 10.3.9. Some have remedied this by disconnecting their Digidesign hardware, but it's a temp fix only.
    Re-Installing ITunes will not solve this. You must go to your Digidesign Folder and run your Digidesign Core Audio Setup then remove ITunes from the list. At this point quicktime/ITunes should work fine.
    Also Apple has issued a Quicktime 6.5.2 Re-Installer for anyone who's havimg trouble with the Quicktime 7. Here is the link
    http://www.apple.com/support/downloads/quicktime652reinstallerformac.html

  • Apps do not respond when waking from sleep mode in Mountain Lion

    updated to the new OS a few weeks ago (no more than 14days) - since the upgrade, everytime the Mac awakens from the sleep mode, nothing responds. 
    If you select the app the app will just bop up and down. 
    If you try to clear trash, the message window appears but doesn't complete the task. 
    If in Safari, the page doesn't load. 
    In iPhoto the a blank window opens but nothing else apears and the loading icon continues to rotate but nothing else happens.
    The mac is using an ether net cable and not over wifi. 
    There is no problem if once I restart the machine, however this has to be done via the power scoket as the "restart and shutdown" options again do not respond and timeout.
    To save energy I use the sleep mode all week Sunday PM to Friday AM.  The machine is usally switched off all Day Saturday.  However as I use it everyday during the week I avoid turning it on and off everyday.  It is only 2 years old and I did not have this problem before the upgrade.
    Anyone got any ideas or having simliar issues?

    Hello:
    From what you describe, I would probably reinstall OS X 10.8.  In answer to your question, I have not seen anything similar.
    You might also look at your log files around the wake time to see if anything looks "odd."
    Barry

  • IPhoto '11 not responding when importing from Canon S90 with videos

    Hi,
    I have a recurring problem attempting to import photos/videos with iPhoto '11.  If the memory card only has images, they import properly when using my card reader, but if there are also videos taken with my Canon S90, then the import hangs. Even if I force quit, iPhoto will continue to hang until the computer is rebooted. I also use a Nikon D200 and have never had any issues importing, though that camera does not take video.
    Oddly, if I first copy my memory card to my desktop and then import from there (rather than using the card reader) then it will import.
    Any suggestions?

    How big are the files? Iphoto has alwys baulked at importing large videos from the Card directly.
    Regards
    TD

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

    Canon MX920 not responding when hooked up over wifi as WPS printer on Airport Extreme, any ideas?

    Ping the IP address of the printer.
    If you are doing this from windows, have you installed the airport utility for windows?

  • Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

    Hello,
    I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4.  While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD.  I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager.  Towards the end of the week though this stopped working.  Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding".  If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen.  My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else. 
    I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly.  I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD.  I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
    Is anyone else having this issue?  Any help would help me keep my sanity.
    Thanks,
    Dane

    Have you had any luck finding a solution to this?  The only thing I have found was to unbind and then bind without authentication.  Any help with progress on your end would be appreciated!
    Nick.

  • What are IP's 10.126.20.1 and 209.148.243.165 and why do they not respond to ping??

    I have been trying to understand some issues in my internet connections.
    If I do a traceroute to say, netflix.com I and get this rather long response:
    The 10.0.1.1 is my airport and I can ping it successfully.
    the 10.126.20.1 appears to be in my router, based on the IP, but it does not respond to a ping (timeout).
    and
    209.148.243.165 appears to be owned by Rogers cable, but also does not respond to a ping. The remainder seem more or less reasonable.
    Can someone tell my if there is a reason the two above IP's do not respond to ping? Does this imply something is wrong in my part of the network?
    I am a TSI customer who uses the common carrier services of Rogers Cable and I have been told my modem is faulty even though internet access, not withstanding the above questions, works well.
    The modem is a Thomson DCM476. I am able to ping its IP, however the tracerout does not include the above IP's
    Can someone please lead me in the right direction?
    Thanks
    Barry
    traceroute to netflix.com (69.53.236.17), 64 hops max, 52 byte packets
    1  10.0.1.1 (10.0.1.1)  1.262 ms  0.989 ms  0.701 ms
    2  10.126.20.1 (10.126.20.1)  8.294 ms  7.886 ms  7.900 ms
    3  209.148.243.165 (209.148.243.165)  10.543 ms  10.265 ms  11.780 ms
    4  69.63.249.77 (69.63.249.77)  10.911 ms  11.223 ms  7.890 ms
    5  ae0_2140-bdr04-tor.teksavvy.com (69.196.136.132)  9.884 ms
        ae0_2110-bdr04-tor.teksavvy.com (69.196.136.36)  20.773 ms  10.787 ms
    6  ix-0-0-2-0.tcore1.tnk-toronto.as6453.net (64.86.33.21)  10.533 ms  9.450 ms  10.983 ms
    7  if-5-0-0-5.core4.tnk-toronto.as6453.net (63.243.172.25)  65.523 ms
        if-0-0-0-4.core4.tnk-toronto.as6453.net (63.243.172.29)  12.200 ms  11.180 ms
    8  if-0-1-2-0.tcore1.ct8-chicago.as6453.net (63.243.172.38)  25.885 ms  25.107 ms  25.536 ms
    9  p5-1.ir1.chicago2-il.us.xo.net (206.111.2.33)  22.295 ms  23.455 ms  22.144 ms
    10  207.88.14.193.ptr.us.xo.net (207.88.14.193)  82.020 ms  78.378 ms  79.484 ms
    11  te-4-1-0.rar3.denver-co.us.xo.net (207.88.12.22)  80.880 ms  79.218 ms  79.740 ms
    12  te-3-0-0.rar3.sanjose-ca.us.xo.net (207.88.12.58)  78.672 ms  78.702 ms  76.650 ms
    13  ae0.cir1.sanjose2-ca.us.xo.net (207.88.13.73)  76.016 ms  76.863 ms  77.983 ms
    14  216.156.85.46.ptr.us.xo.net (216.156.85.46)  77.971 ms  76.340 ms  95.172 ms
    15  xe-2-2-0-954.jnrt-edge01.prod1.netflix.com (69.53.225.26)  76.076 ms  87.621 ms  76.976 ms
    16  te1-8.csrt-agg01.prod1.netflix.com (69.53.225.6)  77.602 ms  77.353 ms  79.168 ms
    17  netflixinc.com (69.53.236.17)  77.611 ms  77.480 ms  76.792 ms

    One additional test is to use the 'whois' command in Terminal to gather additional information on each of the IP addresses that you get from using traceroute.
    My guess at the 10.126.20.1 address is that this is indeed the IP address of your router on the WAN side ... and, as you surmised, it is being provided to your router by your ISP via the Thomsom modem. This looks like a case where the ISP has assigned you a "Public" IP address on their private network. That is, your router does NOT have a Public WAN IP address. This usually is not an issue unless you needed to run servers on your local network that required access from the Internet.
    If you are sure that Rogers is supposed to provide you with a public WAN IP address, then either they are not or the modem is faulty as they have indicated.
    The second IP address, in question, 209.148.243.165, is indeed, assigned to Rogers Cable. This may be one of their DNS servers for further routing of your traceroute command request.
    BTW. It is NOT unusual for owners of networking devices on the Internet to block ping requests.

  • HT4097 my ipad not responding when i connected to pc

    my ipad2 not responding when i connected to pc, like no device connection to cpu

    Do you mean evil your device is not recognised in iTunes for Windows? If so,
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • With ios 8.3 ipad mini apps sometimes do not respond when touched

    a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • My Elements 9 is not responding when started Windows

    My Elements 9 is not responding when started Windows.

    Without proper system information and otehr details such as the crash log from the Event Viewer nobody can say much.
    Mylenium

  • My ipods power button not responding when pushed

    my ipods power button and volume buttons are not responding when pushed

    Try the following to rule out a software problem:
    - Restore the iPOd from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If you still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for