Viper Remote Start Issues 2012 Chrysler 300

I had a Viper remote start installed in my 2012 Chrysler 300. The price and installation went great. Scott at the Best Buy in Novi, MI is great. My issue is that yesterday (12/12/14) when you start the car with or without the remote start there is a thumping noise inside the dash towards the passenger side. It sounds like something is spinning and thumping on something. It will do this for 45-60 seconds then stop.
The remote start still works and it does not affect anything else. I'm going to call the store this week but I wanted to see if this has come up before.
Thanks!

weird, yeah unfortunately without seeing the vehicle and running through some troubleshooting, there is an infinite number of possibilities that could be wrong. If it is doing that only on remote start i would say that there is a problem, but since it is doing it with the key also, it is more than likely nothing with the remote start or the installation. You can definately take it into the local bby for further diagnosis, but once the tech sees that it isn't anything with the remote start then he will send you to a dealership or someone who can fix that issue. Sorry i couldn't be more help, but bring it back into the shop for a diagnosis, and if it out of our hands then the tech will send you off to another person to get it fixed. best of luck!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Similar Messages

Viper remote start on 2014 Jeep JK

Will any of these two viper remote starts work with a 2014 automatic Jeep wrangler unlimited with manual doors and no alarm?Will I be able to install a viper invisibeam after the remote start is installed?
1. Viper 4115V1D Remote Start System with Interface Module and Geek Squad® Installation
SKU: 9999221100050000
2Viper - Remote Start System
Model: 4115V1B
SKU: 1625747
thanks.

yes, as far as wranglers go that are automatic you will be able to have this installed in your vehicle, you will need a few other parts with that purchase. that kit that you are going to purchase, will have the bypass module that you will need to simulate a chip in the key, and do some other features if it is able to. that kit will also come with the installation of the module (the dball2) and also the basic installation of the remote starter. again this is just a basic remote start with 1500ft of range, and 1 remote. a hood pin will also be necessary, but is only 9.99. The last thing is that you will need to purchase a 10AWG amp kit also since there isn't a strong enough power source in your vehicle, so we will have to grab power from the battery to power the brain of the remote start. you will also need a 12.99 relay for your vehicle.
this one's grand total for the 4115v1d is $312.96 before tax.
the second remote starter does not come with the bypass module or the installation of the bypass module, so it will be a little more expensive. it will still need the hood pin and the 34.99 10AWG amp kit, and the 12.99 relay. with a grand total of 342.94. personally if i were in your shoes i would just go with the first one because it has everything you need and is the exact same product but without the bypass module included and installation of that module. also contact your local bby to get an exact quote, i know some shops don't use hood pins that we carry and use the one out of the box, so contact them and get a grand total. thanks for asking the question and sorry it took so long to get back to you. best of luck!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Keyless Entry/Remote Start for 2012 Highlander

I have a 2012 Toyota Highlander wtih JBL audio, navigation, and keyless ignition. I would like to add remote start and be able to use the new fob for keyless entry, lock/unlock, and open/close the rear hatch. Is that possible without having to carry the OEM fob too?

well you have a couple of different options for sure. if you are looking at just getting a basic remote start/keyless entry, then you will not have to carry around your other key fob with it, because our remote start key fob will be able to do all the features your old one will, with lock, unlock, remote start, and trunk hatch pop. now the thing that i would be a little iffy about hooking up for you is the trunk release. does your back hatch open up all the way and close all the way when pressed again? the reason why i ask that is because alot of the back hatches on toyotas just pop that back glass and if you were to accidently hit that button and you cannot tell that it is open (like most toyotas with teh back hatch glass) then you are leaving your vehicle not only not secured but also opens yourself up to all the elements that your climate will bring in the place you live. i usually only will hook those up if the customer is really really wanting that, but i always let them know about that risk, but if your hatch opens and closes and you can physically see that it is open or closed then by all means hook it up!
so below you will have a break down of the different remote start systems, i wish i was able to give it in a little better of a format, but this is the best that i can do!
Materials charge: $5.00
Viper 4105VB:     $199.99
hood tilt switch:    $ 9.99
Relay:                  $12.99
FLCAN/DBALL:   $99.99
Module install:     $39.99
Trunk release:     $39.99
TOTAL:               $407.94 BEFORE TAX
what this sytem above will offer you is a remote start keyless entry with trunk release. the range will be 1500 feet, with a 1 way communication. when you click the button you will have to see your vehicle and look to see if the parking lights are running, if they are on then you will know that it is running. the hood tilt switch is a safety for mechanics, and yourself if you are ever working under the hood so that no one can start the car while you are working, or if you disconnect the battery, it will not try to start upon re connecting the battery. the additional relay is for your vehicle since it has 2 starter wires, and our remote start only has 1 output. the FLCAN/DBALL will simulate the chip in your key so that it will allow the vehicle to start remotely,expensive i know but necessary. the module installation is for the installation of the FLCAN/DBALL, and the trunk release labor is for, well trunk release haha!
you do have other options but this is the first one that will get you everything that you are looking for. if you want a little bit more range, and 2 way communication add on $100 dollars making $507.94 for 1 mile range, and 2 way communication! with the 2 way you are able to hear a confirmation on your keyfob letting you know through beeps and a melody that it is locked, unlocked, or remote started, or if you hit the trunk release button. at the end of your installation you will get a demonstration of how to use your remote start better than we do. again if you have any other questions feel free to let me know! hope this helps you out a little!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Viper Remote Start woes

I had a 5706v installed about a year ago in my Excursion. About a month ago it quit locking the doors but doing everything else. Apparently the BB that installed in no longer has qualified techs so I now have to drive about another 30 mins to a different store. They mentioned they were incredibly busy and the store that did the work originally was 'questionable' (their words, not mine).
So I set an appointment a week out and they resolve the locking issue. However, now the remote start doesn't work at all and just gives me an error. At somepoint it is not only inconvienent but it's costing me money to drive my truck out there and leave it for hours and find a ride home and back.
What is the policy, is there X tries BB has before giving up? If a technician is unable to perform the work properly, can it be outsouced to a installer that can do the work?

Remote starts are key for cold winters, and hot summer days, but to be without keyless entry also, well that is definately inconvinent! The Best Buy that did the original installation, may not have the techs that are qualified to look at the remote start to properly diagnose the problem, but the other "busy" Best Buy should be able to assist you in this matter. To be qualified troubleshoot isn't necessarily a qualification, it is more of a necessity to do this job. I personally haven't had a shop that wasn't qualified to work on a troubleshoot especially for a remote start, but im sure there are some out there, and unfortunately you found it. With that said, I am terribly sorry that you will have to make the trip up to that other busy store to get this worked on. Have you tried replacing the batteries in the remote to eliminate a battery issue. Just odd that the remote start worked fine for a year and then went out. Batteries are usually the culprit, and alot of times cause intermittent issues with the functionality of the remote start or keyless entry.
If you have the viper 5706 your lcd screen will indicate that you are running low on battery if you look at your screen, but there is also a failsafe built in that will send a second "chirp" through your systems siren. so you will lock the car, hear your first chirp, shortly after there will be another chirp that will occur, and send a message to your remote. This indicates that the battery is low and needs to be charged with the supplied micro usb cable that came with the unit.
Part of our lifetime warranty means you can take this to any Best Buy in the country to have to work performed. The fact that the original shop doesn't have anyone qualified, is unfortunate, and the trip that you have to make because of this is also ashame. I do apologize that you are having these problems, but if you hop on the schedule at the other store, im sure they will be able to assist you and get your remote start and keyless working again. The good thing about remote starts is that if you are going to have a serious problem outside replacing an antenna, antenna cable, or batteries, there would be immediate malfunctions with the system. Should be something small, is what im trying to tell you, but again without diagnosing it properly who knows?!
Again, i apologize for the troubles that this has caused, and if you have any follow up questions please don't hesitate to ask. Thanks for posting with the community, and also thank you for your time and patience.
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Viper remote start model 4103V

I have Mitsubishi Endeavor 2007 with manufacturer alarm I am checking to see if anyone know if this remote start will require extra part and cost for installation?
Thanks

Hi sawwas,
I apologize for the delay in responding. If you haven't already gotten your answer to the cost for the remote start parts and install I would recommend that you stop at your nearby Best Buy Install Bay and talk to the techs. They will be able to give you a definitive answer on cost. Thank you,
Marti|Social Media Specialist | Best Buy® Corporate
Private Message

Viper 4202 remote start for toyota highlander

Hello. I'm looking to purchase the above Viper model. Does anyone know for sure if it includes the keyless entry? The viper site says yes but it's not clear on the bb site (at least how I'm reading it). My 05 highlander had it's existing remote start and keyless entry disabled at the dealer. That was the culmination of a bad experience so I won't have them try to fix it. I don't want to buy a remote start and have to unlock the car with my key, I want to have both. Thanks for the help.

the only thing that is included with the installation is the product itself. you will really never see the discount until you are at the register and it is printed out. basically what it does is takes a $200 remote start and it will ring up at 200, but on the reciept it will show 100 for the installation and 100 for the product. all it does is package itself out with our installation. the rest of the parts are going to be added on for your vehicle specific. so if you need a bypass module you will be looking at purchasing your $100 module and the installation of that module which is 29.99-59.99 depending on the car. if you wanted anything extra like horn honk, trunk pop, smart start add on (at time of installation), those would all be $29.99 extra.
pretty much you can have the same car as someone else but you can occur more installation charges by how many features you want installed at the time of. no car is the same really, because every person will want to spend a certain amount, while others wouldn't want to spend that much.
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Remote Start installation question - Trying to understand

I just want to get auto start added to my 2012 Dodge Charger. The dealer is asking for waaay to much for OEM remote start and install so I figure Best buy would be cheaper. I see many products ranging from $199 to $600. I plan to get either the Viper 4205V or the 4115V1B. My question is, I literally just want autostart. I would like to still use my existing FOB to unlock my doors, pop my trunk, etc. Sounds like when an aftermarket is installed "stuff" needs to be bypassed and you end up using the aftermarket lock/unlock, trunk open features rendering your current key fob useless. Is this correct?
1) Can you confirm with he viper units listed above, that I can get autostart installed on my car, and still use my existing key FOBs for all my basic funtion (lock/unlock, truck)?
2) Also does the standard Geek Squad install come with the open hood auto kill feature, I seem to hear the most complaints about installers not installing this safety feature and not telling the buyer they dont install this.
Thanks
Solved!
Go to Solution.

Yes my FOB unlock/locks my door and pops trunk while car is running.
So bottom line is (as far as you know), there should be no reason the viper units I selected should not work with my car. And I shouldn't need any special (expensive) add ons to get things to work properly and my original FOB should work as usual.
I just dont want to get something installed that keeps something else from working properly on my car when from having autostart installed.
Thanks

Remote start compatible with manual transmission?

Hello,
I was directed here by Marti from your FB page. I would like to know if your remote start
(CompuStar Remote Start, Universal Bypass System & Geek Squad® Installation - SKU: 9999189600050003)
would work with my 2012 Mazda 3 S Touring 6-speed manual transmission. If so, are there safety precautions like an e-brake sensor or clutch override that will be put in place so my car won't drive away if I remote start it in gear?
Thank you in advance,
Michael

call your local shop compustart the ones that we carry in store will be compatible, the one that you are trying to show me woudln't pull up so i cant give you a 100 percent answer. call your shop make sure they know what precautions they would need for a manual transmission, and see if they are a compustart store. start by calling your local best buy installation bay. good luck
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Remote start of managed server

Hello everyone,
1: I am using Weblogic Application Server version 10.3.0 in development mode over Windows machines. I will use the word 'host' for the hardware machine to avoid confusion with Weblogic 'machine'.
2: The scenario is as follows :
     : There are two hosts - Host-1 with IP 111.222.333.444 and Host-2 with IP 555.666.777.888
     : A Weblogic domain was created on Host-1 with one managed server and one (Weblogic)machine. The admin. server runs on Host-1 at port 7001
     : The machine,say M1,was assigned the IP of the Host-2 i.e 555.666.777.888
     : The managed server,say web-server,was targetted to M1 and will run on port 7005
     : The steps like pack and unpack were carried successfully and the admin. server was started on Host-1 and web-server was started on Host-2(NOT REMOTELY).The node manager on Host-2 was started at default port 5556
3: OBJECTIVE is to remotely start/stop the web-server from Host-1 via a Windows Scheduled Task which will call the startManagedWebLogic.cmd in turn.
4: The issue that I am facing is via admin. server console(accessed on Host-1),I am able to start/stop the web-server(on Host-2) remotely. But as soon as I attempt to start it using a script,
startManagedWebLogic.cmd web-server http://111.222.333.444:7001
I get JVM_BIND issue
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.
>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Error> <Server> <BEA-002606> <Unable to createa server socket for listening on channel "Default". The address 555.666.777.888 might be incorrect or another process is using port 7005: java.net.BindException: Cannot a
ssign requested address: JVM_Bind.>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Emergency> <Security> <BEA-090087> <Server fail
ed to bind to the configured Admin port. The port may already be used by another process.>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Critical> <WebLogicServer> <BEA-000362> <Server
failed. Reason: Server failed to bind to any usable port. See preceeding log messag
e for details.>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server s
tate changed to FAILED>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Error> <WebLogicServer> <BEA-000383> <A critica
l service failed. The server will shut itself down>
<Mar 11, 2011 3:35:36 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
4: Please note that I have checked the port availability via netstat on Host-2 and it is confirmed that the port 7005 is not used by any other process.
5: Please help me in establishing the cause of this ambiguous behaviour - successful remote start/stop via admin. console but not via script.
Thanks !

Actually, my message had a mistake in it. I had mentioned the port number as 7003 for the ManagedServerB. It should have been 6129.
          Any solution to the problem ?
          Regards,
          Sandeep

Callmanager Conferencing with remote locations Issue

I am new to using callmanager, and I need a little help.
I have created a meet me number on my callmanager. Once a session is begun, all local network users are able to join the conference call with no problems..
If a remote location hosts a meet me call, all my local network users are able to join THAT session with no problems as well.
But if I host a meet me session on MY local network, remote locations CANNOT reach my session. The line remains silent when they dial in.
I've been told to check the codecs which seem fine and we are checking for a firewall issue, but all normal calls local and remote work just fine. It's only the conference bridging that causes issues.
Please help.
Thanks

Hello,
Thank you very much for replying.
The configurations, I've been told, are correct. G711 for intrasite and G729 for intersite. And region and device pools correct as well.
I presented the HW conf bridge solution to a coworker who said it makes sense, but at this time, I don't have access to a hardware conference bridge. Is this the only solution?
From: prbt
To: Nichole Ketchum
Sent: Wednesday, August 3, 2011 1:54 PM
Subject: - Re: Callmanager Conferencing with remote locations Issue
Cisco Support Community
Re: Callmanager Conferencing with remote locations Issue created by Priya B.T in Unified Communications Applications - View the full discussion
hi,
please check the following on the call manager,
- Check the region configuration on each device pool.
- Then check the region configuration between the two regions.
- One of the best practices followed by Cisco is, the intrasite region settings should be g711.
- And the region settings between inter site should be g729.
- G729 is not supported by software conference bridge, it is only supported by hardware conference bridge.
- So add the hardware conference bridge to the MRGL of the phone.
- And the hardware conference bridge has to be first in the list, that is before the software conference bridge.
please let me know if this helps or we can do further trouble shooting on this issue.
Reply to this message by going to Cisco Support Community
Start a new discussion in Unified Communications Applications at Cisco Support Community

What best way to turn on all computers remotely using sccm 2012 sp 1

what best way to turn on all computers remotely using sccm 2012
and what the difference between wake on lan and out of band service point role

Hey!!! I am a 1E engineer and MVP... we started the power management movement with our very first software product, created around 12 or so years ago, called 1E WakeUp. The complete solution which manages power on (integrated with SCCM, or stand alone if
you are not an SCCM shop) and power off (under a tightly controlled process) is called
NightWatchman
Here is a
recent blog post I authored that was the last in a series documenting the entire wake-up process including how it integrates with SCCM or stood up standalone. It contains links to those earlier posts that explain our entire technology, so you will likely
want to read all of them in order for a full understanding of our technology. It works incredibly well, is the most mature solution in the industry, and is extremely simple to install with minimal resources.
If you have any questions, feel free to reach out to me privately
Ed Aldrich | 1E | Pre-Sales Solutions Engineer | ConfigManager MVP 2003-2012

(2) Vehicles - But want to have only ONE FOB for keyless entry and remote start

I have the following 2 vehicles:
2003 Dodge Durango RT with automatic transmission
2006 Volvo V70R with 6-Speed manual transmission
I am looking to purchase a keyless entry / remote start on BOTH vehicles but use only (1) FOB to control both as I will only be using either vehicle at a time. If I need to use both, I will use 2 FOBs. Is there any current breand or system that can do this, like have switch and can be programmed for more than one vehicles ??? Thank you for any info and God Bless !!!
Solved!
Go to Solution.

VBVAGUY,
Best Buy has 2 brands that can control 2 cars. Viper and Compustar. You said you would like keyless and remotes start. Are these the only features you are looking for? Security? The system below is a Viper 1-way with around 2000 foot range that offers 2 car mode. They also have a 1 mile range and also a 2-way system. This is a nice feature if you don't have visibility to the vehicle, the remote will tell you if the car started.
http://www.bestbuy.com/site/viper-1-way-remote-start-system/6891137.p?id=1218810613502&skuId=6891137
With any of these system you are also going to need some additional parts and labor. Also because the Volvo has a manual transmission there is a certain sequence you must do every time you park the vehicle. If this is not done the remote start will not work. Doesn't effect the keyless entry.
Stop in a local Best Buy and speak to the AutoTech. They can educate you on the different model, feature and the manual transmission sequence.

BBY - Remote Start - Toyota Highlander question

I'm interested in having a remote start installed on my 2013 Toyota Highlander Limited.
It does have the SMARTKEY. All I need is something that will start it (does not need to be two way). Can someone on here give me a estimate on what it would cost to make this happen?
Thanks for your help in advance!!

iowaman great question! being a former iowan myself i couldn't be happy to help you out more because of all the bogus weather that you have been having back there! it has been cooooooold! after doing some research i have found that it isn't as sensitive as touching a door handle, but it will shut down when the door is opened. so no when someone touches the door handle it will still stay on, but once the door is opened then it will shut down and you just start the car like normal, get in push the button. but your car will be nice and toasty. so basically by the time that you sit down it would be like you always do when starting your car, but the car will already be warm is the only difference. also all doors have to be closed for the remote start to take over. I hope this helps clarify your situation! best of luck and if you would let me know the city you are in i could give some great installers that i would recommend to work on even my car! you have a great batch to choose from out there!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

Viper Remote Start Issues 2012 Chrysler 300

Similar Messages

Maybe you are looking for