/virsa/vfatbak and the report it generates

The /virsa/vfatbak report runs regularly. The controllers are telling me that they used to receive a detailed log report in their email, but they've stopped receiving this report. When I go into firefighter and look at the log, there is sufficient detail, and yet the email to the controller only shows that someone logged into their firefighter ID.
I looked and didn't find any setting that was misconfigured/not configured. I was wondering if you could point me in the right direction.
Thanks,
Santosh

UPDATE
While trying to get this report to send emails as I need it to, I found that my /virsa/zvfatbak began to cancel spontaneously. So now, every hour, a bunch of emails get sent out by DDIC saying that the job has failed.
On further investigation, I found the following short dump:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          08.09.2010 15:49:42
Short dump has not been completely stored (too big)
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
I found a note numbered 1039144, but that is in regard to this job never terminating. Clearly, this job is now running out of space, as can be inferred from this error.
I had BASIS run this job on a different app server, and it finished, and then it continued to run successfully for an additional 4 hours, after which it began to fail.
Please let me know your thoughts.
Thanks,
Santosh

Similar Messages

[LV - TS] How to execute a SEQ file, get the result (PASS/FAIL) and the report file ?

Hello,
I'm looking for the most obvious and simple way to, from Labview :
1- Start the Teststand engine : DONE
2- Get a list of SEQ files to execute : DONE
3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
4- Get the result of the SEQ execution : <- unsure
5- Get the XML path+name of the report file generated : <- obviously not easy
http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
Here is my current implementation :
David Koch

Hello,
I tried to work from this example :
http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
However it remains unclear about how to get a simple
answer from just running a sequence file out of any
model so far (Simple Pass). Like I told you, all what
I need, once the TS engine is started, is a VI with the
following interface :
INPUT
1- TS engine reference
2- SEQ file path (path or string)
3- Sequence name to execute
4- UUT string (optional, but yeah)
5- error in
OUTPUT
1- Result boolean (PASS/FAIL)
2- Path to XML report
3- error out
It would be so cool to just have this
About the surrounding UI, I'm working on it. The LV
code is not really important at this point, it's running
a SEQ file that matters to me.
David Koch

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

HELP.........I have produced a training module and the reporting at the wont do what I need.

HELP......... I have produced a training module and the reporting at the wont do what I need. I need it to tell me what percentage of the test I have scored which it does but then I need it to tell me which questions I got wrong without giving me the answers.

The seller needs to follow this procedure:
http://support.apple.com/kb/TS4515
If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
Regards.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SAP SCRIPT and the report

Hi Peers,
I am working on the report which calling the Form from SAP Script and displaying the form.
I wanted a selection screen in which if the user enters some value it should automatically preview in the form.
I am really new to the ABAP Pls some help on this .
Any code is appreciated.
Every answers will be rewarded.
Pls peers help on this.
Seema.

Hi,
where is a simple example:
PARAMETERS: KUNNR(10).
PARAMETERS: PREVI AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION.
PERFORM OPEN_FORM.
PERFORM START_FORM.
PERFORM PRINT_DATA.
PERFORM END_FORM.
PERFORM CLOSE_FORM.
*&      Form OPEN_FORM
FORM OPEN_FORM.
CLEAR ITCPO.
ITCPO-TDCOPIES = 1.
ITCPO-TDDEST = PRINTER.
IF PREVI = 'X'.
    ITCPO-TDPREVIEW = 'X'.
ENDIF.
ITCPO-TDNEWID = 'X'.
ITCPO-TDDATASET = 'test'.
ITCPO-TDSUFFIX1 = PRINTER.
ITCPO-TDSUFFIX2 = 'test'.
ITCPO-TDDELETE = ' '.                " Não eliminar imediatamente
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
            DEVICE   = 'PRINTER'
            DIALOG   = ' '
            FORM     = 'YOUR_FORM_NAME'
            LANGUAGE = SY-LANGU
            OPTIONS = ITCPO
       EXCEPTIONS
            CANCELED = 1
            DEVICE   = 2
            FORM     = 3
            OPTIONS = 4
            UNCLOSED = 5
            OTHERS   = 6.
ENDFORM.                    " OPEN_FORM
*&      Form START_FORM
FORM START_FORM.
CALL FUNCTION 'START_FORM'
       EXPORTING
            LANGUAGE = SY-LANGU.
ENDFORM.                    " START_FORM
*&      Form PRINT_DATA
FORM PRINT_DATA.
SELECT * FROM KNA1 WHERE KUNNR EQ KUNNR.
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT = 'TEST'
              WINDOW = 'MAIN'.
ENDFORM.                    " PRINT_DATA
*&      Form END_FORM
FORM END_FORM.
CALL FUNCTION 'END_FORM'.
ENDFORM.                    " END_FORM
*&      Form CLOSE_FORM
FORM CLOSE_FORM.
CALL FUNCTION 'CLOSE_FORM'
       EXCEPTIONS
            UNOPENED = 1
            OTHERS   = 2.
ENDFORM.                    " CLOSE_FORM
Then, you must create your SapScript in order to print some information.
Regards,

Data model automatically changes the color and the report corrupts.

we want to run six reports in a single report and users can run the report they select . So,We have 23 simple queries in datamodel and 20 pages of layout,
it was working fine.but now if we make some changes the color in the datatmodel changes,when we try to save this the file corrupts.when we try to open the
file it says some information missing in the report.we have reports builder10g.Is there any size limit for rdf file? because our rdf file size 944kb.
Thank you.

No.

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

I got hacked and the 'Report a Problem' isn't working. Who can I contact about the purchase I didn't make?

There is a purchase on my iTunes account made yesterday. I DID NOT make this purchase, but the 'Report a Problem' feature is not working. I am following the directions from the Help section accurately. When I logged in though, it said I needed to change my password because of suspicious activity. Who can I contact?

Hello,
I woke up today around 9:30 am UK Time, checked my emails on my phone and then started playing "Talking Ginger" kids game because of one of the offers, around 10:00 I noticed an email alert on top of my iphone screen about itunes receipt.
When I opened this, it was about "Kids Song Collection" purchase reciept for £1:49.
I was shocked because first of all my 3 years old daughter is sleeping, secondly I have security settings configured in iphone with a complex password to purchase and she does not know that password and thirdly I am using the phone and I know I didn't even open App Store or that app so how come this has happened. I did a search on google about how to report and tried to follow the process through itunes but every time I click on "report a problem in itunes" this opens a new apple page in firefox "http://www.apple.com/uk/support/itunes/"
Whilst further browsing Purchase History in itunes I also noticed another purchase from yesterday about "FireWorks Arcade" and this was unbelieveable because I didn't even receive any receipt yesterday about that purchase and again I am the only one who can make purchases due to the complex password known only to myself.
I am not sure what is going on here, but clearly as per today's incident it seems that apple is loosing their control.
Please advise what can be done here.

The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.

Hello all,
I have SQL express 2014 advance edition installed ..
and i am connecting SQl server 2008 r2 instance which is in network
while creating datasource in Reportserver which has Express installed ..
got this error ..
please help me how to connect to remote server
Dilip Patil..

Error message says it all.
With SQL Express, Data source should be local SQL DB.
With SQL Enterprise, Standard, BI edition, you can create Data soruce which are hosted on other servers.
Please refer similar thread:
https://social.msdn.microsoft.com/Forums/en-US/c0468e3f-bad7-47a7-a695-75c13762280a/the-feature-the-edition-of-reporting-services-that-you-are-using-requires-that-you-use-local-sql?forum=sqlreportingservices
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Changing the referential of an universe...and the reports?

Post Author: pierre.thepierre
CA Forum: Deployment
hi all
I have a universe plugged on a referential R1 and lots of reports based on it.
I would like to plug that universe on another referential R2. I Suppose I'll loose all the BO reports I made before since on R2 there is a brand new universe with new IDs.
Is there any workaround to avoid that disaster?
I have a 5.1.9 BO & designer
thanks
pierre

If the DisplayObject is on the timeline then its name cannot
be modified, but the name property of dynamically created
DisplayObjects can be changed. (DisplayObject.name:String
read/write).

I purchased an App it does nothing and the Report this App button doesn't exist, what other recourse do I have?

My kidspurchased Littlest Pet Shop for the iPad2. It loads and then does nothing. There is no Report this App button in the top right corner as suggested in App Support. What else can I do?

Contact iTunes Support: http://www.apple.com/support/itunes/contact/

How I can receive data which come form Ethernet.The protocol we adopt is TCP/IP.And the data is generated by SCM.

help me!

Start by looking at the examples
Help>>>Find Examples>>>Networking>>>TCP&UDP>>>Simple Data Client
also
Simple Data Server
If you have questions after looking at these examples, fire off a new question to this list and we will take you to the next step.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

FlexUnit4 - Tests run but runner has to be manually closed and no reports generated.

I am trying out FlexUnit4 and using ant to build the tests.
I built my ant script on the one from the FlexUnit4SampleCIProject.
The test from that project run, the runner automatically closes and the reports are generated, my project however does not close the runner and generate reports.
I am using flexsdk 3.3
What could i be doing wrong?

Morning guys,
Mike and I worked through the race condition issue this evening/morning and new code should be in SVN as you read this post. The short of it was that sometimes the FlashPlayer would spin up faster than the socket on the Java side and data was being lost along the way. We've implemented a handshake between the CIListener and the Ant task so we can guarantee that things are working correctly now. I've also done a shallow refactoring of the code to decouple some responsibilities so we can more easily test things going forward. I've also updated the threading code to use stuff from Java 5, so going back to Java 1.4 will be a pain, but is still feasible with a few extra JARs.
Let us know how it goes.
-Brian

Getting IllegalThreadStateException, while exporting the report to PDF

Hi Friends,
I am using JRC to create report in PDF format.
But intermitently I get java.lang.IllegalThreadStateException while trying to export ReportClientDocument into PDF format using the PrintOutPutContrller.
The I am using for this is
ExportOptions exportoptions = new ExportOptions();
PDFExportFormatOptions pdfOptions = new PDFExportFormatOptions();
exportoptions.setExportFormatType(ReportExportFormat.PDF);
exportoptions.setFormatOptions(pdfOptions);
reportInputStream = reportClientDocument.getPrintOutputController().export(exportoptions);
The exception I get is:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalThreadStateException---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.solidcore.as.report.ReportJob.createPDFReport(ReportJob.java:114)
at com.solidcore.as.report.ReportJob.execute(ReportJob.java:66)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
I am using JRC that comes with CR4E 2.0. The Report is designed using Crystal Report 2008.
Please help me in solving the issue.
Thank you,
Deepak

Hi Ted,
Thank you for the answers.
In our applications the Report will be generated in two ways.
1. A user clicks on a link on web, and the report is generated in PDF format and sent via http.
            At present we are creating a new
            ReportClientDocument for every request and using ExportControl.processHttpRequest() API
            the report in PDF format is sent user through response.
2. Quartz schuduler trigger a job, whose work is to generate Report in PDF format into a file, and the
          generated pdf file is sent to users via mail.
          Here I user ReportCLientDocument.export() API to get the InputStream and use the input stream
          to create PDF file.
It is possible that a user is requesting a report on Web Page and the same report is being generated by Scheduler at the same time. But in each case a separate ReportClientDocument is being used.Since Report containse a huge data, and it takes time to generate PDF file so, it is possible that a given RPT file is opened by two spearate ReportClientDocuemnt (one via web user and other via Scheduler) at the same time.
The have got rid of my earlier exceptions by sycncronizing the ReportClientDocuent.export() API.
But now am getting following exception intermittently.
2009-05-01 16:47:45.859 GMT+05:30 [ERROR] [ReportJob.java:137] [AnalyticsScheduler_Worker-10(34)] - [] Could not generate the Report.
java.lang.NullPointerException
     at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
     at com.solidcore.as.report.ReportJob.createPDFReport(ReportJob.java:123)
     at com.solidcore.as.report.ReportJob.execute(ReportJob.java:75)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
2009-05-01 16:47:45.859 GMT+05:30 [ERROR] [JobRunShell.java:211] [AnalyticsScheduler_Worker-10] - Job reportJobGroup.reportJob threw an unhandled Exception:
java.lang.NullPointerException
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.case(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.close(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.close(Unknown Source)
     at com.solidcore.as.report.ReportJob.createPDFReport(ReportJob.java:155)
     at com.solidcore.as.report.ReportJob.execute(ReportJob.java:75)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
Edited by: Deepak Mishra on May 4, 2009 5:47 PM

/virsa/vfatbak and the report it generates

Similar Messages

Maybe you are looking for