Virtu Universal and Intel Extensible host controller

Hello guys, two questions
1) In the drivers cd I can't find the Virtu Universal MVP installation program, just the driver.
2) Before upgrading to Win8 , the system forced me to uninstall Intel Extensible USB 3.0 host controller, because it was not compatible.Now at the Intel site there isn't the Win8 compatible download.
My question is, what's the function of this controller ?
Thanks

Quote from: xmad on 03-November-12, 07:29:04
Just download the mvp drivers either from www.lucidlogix.com or msi.
I get this message: "No Intel Ivy Bridge or Sandy graphic device was found, check your bios and verify that integrated graphics is enabled"
Is this related to the fact that ClickBIOS don't work ?
I remember some day ago that I had a sort of Intel control center but I can't find it now in my pc...

Similar Messages

  • Intel usb 3,0 extensible host controller driver not working

    I have a hp envy sleekbook 6 1100se. 
    Im facing a problem with the driver of usb 3.0 extensible host controller 0100 microsoft. It says that the device cannot start. gives a CODE 10 error.  Im using windows 8. i've tried updating it and uninstalling and reinstalling it but it doesnt help. I've restored the laptop to its factory settings and then for like 10 minutes the usb 3 ports worked fine and so did the driver. but i restarted my pc and again it gave me error code 10. Its also got something to do with the date of the computer. in the events of the driver it said device started in the date 8/28/2012. but after i changed the date it stopped working. but now this fix doesnt work when the second time i reset my computer. 
    i also know its not a hardware fault because when i plug in my usb in the usb 3 port, the device turns on its light which means that its working. put the computer does not open it or detect the usb drive. 
    Help please. ! 

    Hi,
    Please use the following post:
        http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
    Thanks.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • S431 USB 3.0 eXtensible Host Controller Code 10

    In Device Manager this controller has a yellow flag and the device status is "This device cannot start. (Code 10)"
    I have attempted the following:
    1. Uninstalling/Installing drivers from Lenovo Support
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-s-series-laptops/thinkpad-s43...
    2. Uninstalling ALL USB controllers and having Windows update them upon reboot.
    3. Hours of searching online but only seeing the same sorts of "fixes" i.e. uninstalling the controllers and ensuring I am using device specific drivers.
    Note: No pins are visibly bent or damaged in the USB port and I don't have anything plugged into them.

    Bump
    Note:
    I need advice regarding a possible "fix"
    Some forums suggest removing all power and resetting the CMOS. This would require me to open up the back and disconnect the battery.
    Will an action like this void my warranty?

  • USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

    Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
    I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
    around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
    - 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition. 
    Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
    uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
    problem? 

    Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station. 

  • MSI GE60 2OC Windows 7 x64 USB 3.0 eXtensible Host

    Hi,
    I have another problem with my MSI GE60.
    I have installed Windows 7 x64, updated everything and installed driver.
    At last I installed the USB 3.0 eXtensible Host Controller driver from the msi homepage. But now my usb ports aren't working anymore!
    I tried different driver and deleted them in safe mode from windows.
    Help? ...
    Thanks in advance

    I just posted a similar issue on the same machine, except my USB ports will only work under certain circumstances. It's very odd and it sounds like a driver issue... Did you ever get it sorted out?

  • How to find the drivers of intel(R) 82801EB USB Universal Host Controller ?

    I only find http://binarydb.com/driver/Intel%28R%29-82801EB-USB-Universal-Host-Controller-_-_-24D2-507.html, not find another.
    Driver name:
    Intel(R) 82801EB USB Universal Host Controller - 24D2
    Version:
    5.1.2600.2180
    Date added:
    7-1-2001
    Manufacturer:
    (Standard USB Host Controller)
    Provider:
    Microsoft
    Update date:
    7-1-2001
    Device class:
    USB
    Device GUID:
    36FC9E60-C465-11CF-8056-444553540000
    Install Id:
    PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086&REV_02\3&267A616A&0&E8
    Inf file name:
    usbport.inf
    Section name:
    UHCI.Dev
    Capabilitys:
    unknown
    Services:
    usbuhci
    HardwareIDs:
    PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086&REV_02
    PCI\VEN_8086&DEV_24D2&SUBSYS_0C4A8086
    PCI\VEN_8086&DEV_24D2&CC_0C0300
    PCI\VEN_8086&DEV_24D2&CC_0C03
    CompatibleIDs:
    PCI\VEN_8086&DEV_24D2&REV_02
    PCI\VEN_8086&DEV_24D2
    PCI\VEN_8086&CC_0C0300
    PCI\VEN_8086&CC_0C03
    PCI\VEN_8086
    PCI\CC_0C0300
    PCI\CC_0C03
    Operating system:
    Microsoft Windows XP Professional Service Pack 3 (build 2600)
    Microsoft Windows XP Professional Service Pack 2 (build 2600)
    Microsoft Windows XP Home Edition Service Pack 2 (build 2600)
    Occurence:
    998 users

    This component is supported by Microsoft inbox INF USBPORT.INF on Windows7, there should be no need for "drivers" for this [very old generation ICH5] component?
    Only old OS like WinXP etc would need to have non-inbox INF installed e.g. 82801EB USB Universal Host Controller - 24D2
    https://downloadcenter.intel.com/download/14713/Chipset-INF-Update-Utility-for-848-865-875-910-915-925-Chipset-Based-Intel-Desktop-Boards
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Sat. A300 - USB ICH8 Family USB Universal Host Controller is not working

    Device: Intel(R) ICH8 Family USB Universal Host Controller - 2830 till 2836 and 283A
    Driverversion is: 8.0.0.1008
    Driverdate: 15.09.2006
    is not working!
    Can anybody help me? Where do I find the actual driver?
    Thanks in advance.
    Chris

    The Intel Chipset driver handles USB drivers. You can download it from the Toshiba Support/Drivers Website.
    But if you installed a strange USB Device recently (perhaps a USB keyboard/mouse/HDD), its driver may be conflicting. So you would need to remove that driver from Control Panel -> Program Features first, then reinstall the Intel Chipset Driver.

  • How to install the driver of the 'SCSI and RAID Host Controller'

    Hi,
    I have two Windows XP(32Bit) installations:
    •Windows XP SP2(32Bit) which is old and it seems as if it is infected by some viruses.
    •I have installed another fresh clean Windows XP(32Bit) SP3. However, I have found that there is no category named with ''SCSI and RAID Host Controller'. However, when checking out the old version of Windows XP, I found  'SCSI and RAID Host Controller'
    is there. (Screen shot below)
    The new Windows XP(32Bit) SP3, there is no 'SCSI and RAID Host Controller'
    My motherboard is:
    My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card  with 256MB of RAM.
    ]I am seeing that most computer doesn't has the scsi / raid controller . in the old Windows XP on my computer that SCSI and RAID controller exists, and it it has not  a yellow mark on it.
    When I installed  a new windwos XP 32Bit SP3, no SCSI/RAID in divice manager .
    My computer sound on new Windows XP doesn't work , however, on old Windows XP SP2 works well. I have a buitl-in  sound card. SCSI and RAID controller category in the device manager on the old Windows xp SP2 is realted to sound card,I don't think.
    Thus, What drivers would let the 'SCSI and RAID Host Controller' added in the device manager?
    A man should convert his anger and sadness into strength to continue living in this life.

    If you open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on the pcb somewhere. You should also normally see this information on the first POST screen when you turn on the PC.
    Otherwise Google "775i65G" like I did.
    Here are the driver downloads (assuming it is an Asrock 775i65G R2.0 and not an R3.0)
    http://www.asrock.com/mb/Intel/775i65G%20R2.0/?cat=Download&os=XP
    You should install the inf driver first. Hopefully after you do that you will see your desired listing in Device Manager.
    With regard to the AMR driver and the HDMR driver, you can find some information about these here :
    http://en.wikipedia.org/wiki/Audio/modem_riser
    Unless you actually have something plugged into these risers, it is probably not necessary to install the drivers.
    However, the drivers for the integrated C-Media audio chip and the Realtek Lan chip may prove useful.
    It looks like the motherboard has integrated video but if you are using a graphics card it will not normally be necessary to install the VGA driver.
    You can download both the manual and the installation guide here
    http://www.asrock.com/mb/Intel/775i65G/?cat=Manual
    And if "SCSI and RAID Host Controller" is still not shown in Device Manager, don't worry - because these functions are not supported by your motherboard (again assuming it is an Asrock 775i65G)
    Thanks a lot,
    First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed
    well, and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and
    RAID Host Controller in device manager.
    First: Why did the CPUz, specy didn't detect motherboard name, and only detect the model. IF I need to  open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on
    the pcb somewhere, then what benfit would be there from hardware detection software?
    Second: Yes, my motherboard has integrated video, and integrated audio card
    However, this doesn't mean that I don't need to install them since the Vidoe controller is not properly installed (it is a default VGA ) Also, Multimedia audio controller is not functiong at all.
    Finally: if And if "SCSI and RAID Host Controller" is still not shown in Device Manager in Windows XP SP3,  because these functions are not supported by my motherboard, then why is 'SCSI and RAID Host
    Controller' installed/shown in the device manger in Windows XP SP2 on the same PC???
    A man should convert his anger and sadness into strength to continue living in this life.

  • Intel(R) USB 3.0 Host Controller Switch Driver

    Hello All,
    As part of our software install we are installing the Intel(R) USB 3.0 Host Controller Switch Driver (iusb3hcs.sys) on machines that have Win 7 Embedded (x64). When this driver is installed I have noticed that the USB controller behaves differently:
    When shutting down (or rebooting), the controller does not completely lose power. Therefore, if I reboot or shutdown from Win7, and immediately boot to a WinPe usb stick, the driver in winpe seems to have an issue loading and the stick is not recognized.
    To fix the problem I can simply unplug the machine (allowing for the controller to lose power) and then booting into WinPe the stick is recognized.
    Wondering if anyone knows what OS setting or change I can make in the inf to tell the driver to make the USB Controller power down when doing a shutdown. Any help appreciated

    Hi,
    I'd probably start by asking here:
    https://social.technet.microsoft.com/Forums/en-us/home?category=windowsembedded&filter=alltypes&sort=lastpostdesc
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Universal CINs? (For MacOS 10.4 and Intel Macs)

    Hi!
    1. I was wondering if it was possible to build a Universal CIN for MacOS 10.4, in order to support Intel Macs. If so how? I get link errors in Xcode because it cannot find CIN functions such as MoveBlock, and NumericArrayResize when compiling for i386 (which is understandable). Is there an Intel Mac version of liblabviewcin.a and liblvexports.a?
    2. Is it possible for LabVIEW to call a DLL function in a Universal framework? Or must all frameworks be for the PowerPC?
    Thanks.

    I am trying to invoke code external to LabVIEW that contain AltiVec and in the future, SSE instructions. Right now I am trying to bundle PowerPC code (with AltiVec instructions) with Intel i386 code to support both PowerPC and Intel Macs using a single binary.
    So basically I have:
    1. A CIN that uses AltiVec currently (which includes AltiVec instructions). I would prefer that it switched to a SSE version automatically when I call the CIN on an Intel Mac.
    2. Some VIs that uses the Call Library Function Node to invoke a function in a Universal Framework. The framework is compiled for both PowerPC and Intel. The PowerPC version includes AltiVec instructions and thus is incompatible with Rosetta. I was wondering if LabVIEW would actually be able to invoke such a function successfully on an Intel Mac. I don't have an Intel Mac on hand, which is why I am asking.
    PS: The original post was posted using NI JT's account accidentally. The question is actually mine.

  • How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8

    After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
    This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
    I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
    There is no roll back option in the device manager for this driver. It is grayed out.
    I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.

    Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station. 

  • Can't Install Enhanced USB Host Controller

    I keep getting these popups each time that I load windows xp that its found some new hardware for the USB 2. The hardware is the Universal Serial Bus Controller. However it does mention Intel 82801EB USB 2 Enhanced Host Controller -24DD. I let it search for the needed drivers but it never finds them or there is something else wrong. I keep getting "An error occurred during installation of the device. The data is invalid". Whatever in the hell that means!!! Any clues? I'm running the 875P Neo board.

    Well the drivers for the other USB drivers were automatically installed when I installed Windows XP. The USB 2 drivers however are not installed for the hardware even though the hardware is recognized. I have the SP1 update installed. Here is what happens: when I load windows this screen comes up:
    http://www.angelfire.com/space2/tmoum/newhrdwr.JPG
    I press next and after a few seconds (takes longer if the MSI CD is in the CD-rom) and this screen comes up:
    http://www.angelfire.com/space2/tmoum/newhrdwr2.JPG
    I'm not sure where the drivers for the device are located so I just let windows search for them but this doesn't seem to work.
    Here is what my Device Manager looks like:
    http://www.angelfire.com/space2/tmoum/Devicemngr.JPG
    When I click on the properties of the Universal Serial Bus Controller this is what I see:
    http://www.angelfire.com/space2/tmoum/USB_contrl1.JPG
    and
    http://www.angelfire.com/space2/tmoum/USB_contrl2.JPG

  • No IEEE 1394 Host Controller found.

    While attempting to update my iPod..actually, just while saying "Do Not Disconnect" my iTunes has been shutting down.
    I ran diagnostics on my iPod and the subject showed up -- "No IEEE 1394 Host Controller found." Any idea what this could mean?

    I think I am having the same problem, my iTunes is hanging and not responding. I am not very technically minding, and have now been trying to update my Ipod, and my husbands Ipod, for 3 days. In the same time I have, I think, downloaded Ipod version 7.0.1. I therefore do not know if it is my husbands Ipod which is at fault, or the new software. I ran the diagnostics tool and got the following outcome, which leads me to believe that there is a problem with the host controller, however.. i dont appear to be able to do "anything" with iTunes without it hanging, e.g., i cant burn a backup of the library. I have restarted, restored, downloaded the latest version of itunes, all to no avail. Is there an "idiots" guide to this somewhere? I am totally lost and cognitively challenged. Here is the diagnostics print out
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Acer Aspire 3610
    iTunes 7.0.1.8
    iPodService 7.0.1.8 is currently running.
    iTunesHelper 7.0.1.8 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskWDCWD600UE-22HCT1_____________________09.07D09, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information
    PAUL FORD'S (F:\), iPod with Click Wheel running firmware version 3.1.1
    Serial Number: 4J451VHQPS9
    Bus Speed: 61440
    The last connected iPod serial number: 4J451VHQPS9.

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • [SOLVED] Blinking screen - new Xorg and Intel issue

    Screen is blinking after opening laptop lid no matter what i did (nothing, lock screen, hibernate, standby). It blinks every 10-20 seconds for about 1-2 seconds, and cpu% used by X's raises from 0.3-1.0 to even 10% and system slows down a little in that moment. My Xorg logs:
    $ cat /var/log/Xorg.0.log
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    # closing & opening laptop lid
    # right after opening (properly i suppose)
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): I2C bus "CRTDDC_A" removed.
    (II) intel(0): EDID vendor "CMO", prod id 4609
    (II) intel(0): Using EDID range info for horizontal sync
    (II) intel(0): Using EDID range info for vertical refresh
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 4609
    # after 10-20 seconds
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): I2C bus "CRTDDC_A" removed.
    (II) intel(0): EDID vendor "CMO", prod id 4609
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 4609
    # over and over...
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): I2C bus "CRTDDC_A" removed.
    (II) intel(0): EDID vendor "CMO", prod id 4609
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 4609
    Blinking stops when i restart computer.
    I have newest xorg and intel drivers (xorg-server 1.7.1.901-2 & xf86-video-intel 2.9.1-1). I tried also downgrade this (and related) packages to older versions (even xorg-server 1.5.* & xf86-video-intel 2.4.*) and the same happens... with only one difference. On that oldest packages I've tried screen doesn't blinks, but the wallpaper of the desktop is changing: my -> default -> my -> default... with the same frequency . I was googling a lot, believe me. I study IT on a University and I asked my friends from there, and they just run out of ideas. In addition i can write that it isn't my laptop fault because windows xp works fine and ubuntu 9.04 (i had before archlinux) also worked good. It has started on ubuntu 9.10, so I thought I move to archlinux, and its still here? I suppose its a problem with intel drivers or xorg, but somehow linked with power management of the monitor(?). But why then older packages don't work? Please, I will be grateful for any help.
    My /etc/X11/xorg.conf file generated by 'Xorg -configure' command:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "dri2"
    Load "record"
    Load "dbe"
    Load "dri"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    #Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -Vsync
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Last edited by joda (2009-12-01 09:49:38)

    SOLVED!!! Must enable KMS => switch off vga option in grub, and replace it with "i915.moduleset=1"

Maybe you are looking for

  • Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

    Dear Experts; I  have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements. We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MC

  • DOCMAS Error while checking in and storing

    HI Gurus, i need to send Documents from one system to an other System. I use BDA5 Both system are using different File Systems and the DMS Archive is also different. I can send the DOCMAS without errors. When i Try to process the Documents i can not

  • Deploying application on OC4J

    Hi, I am deploying a simple web application on OC4J which comes with 9iAS infraStructure installation. I changed server.xml, application.xml, default-web-site.xml & application.xml in the META-INF folder of my app but i couldn't access the appln afte

  • Is it possible to edit a VIs block diagramm via the Internet (online programming) ?

    Hi folks, is there a way to alter the block diagram via the internet? eg: i have a PC with Labview installed in my Lab and i want to alter a vi on this PC with my laptop at home (with installed runtime). thx & kind regards, mike

  • Answer Plz

    Hi all,      I need answers for the following questions. 1. d/f b/w Hide and get cursor? 2. Vertical Scrolling in the table control? 3. if there is no screen mention, when we eneter the values in fields and press enter wht will happen? Regards, krith