Virtual appliance oel5u5-64bit-soabpm-11gr1-ps5-2-0-M: Can't deploy

Greetings,
After having installed the mentioned virtual appliance and created the dev_bpm domain, trying to deploy from Jdeveloper to app server raises the following:
[04:55:41 PM] Deploying profile...
[04:55:42 PM] Updating revision id for the SOA Project 'SalesQuoteToContractDemo.jpr' to '1.0'..
[04:55:43 PM] Wrote Archive Module to /home/oracle/jdeveloper/mywork/FusionNX_Application/SalesQuoteToContractDemo/deploy/sca_SalesQuoteToContractDemo_rev1.0.jar
[04:55:43 PM] #### Deployment incomplete. ####
[04:55:43 PM] No SOA configured servers found for deploying the archive file:/home/oracle/jdeveloper/mywork/FusionNX_Application/SalesQuoteToContractDemo/deploy/sca_SalesQuoteToContractDemo_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
It seems that the admin server in the dev_bpm domain is not configured for SOA. However, the documentation says:
"This domain is configured using the development template for SOA and BPM, which targets all the SOA and BPM applications to the AdminServer."
What am I doing wrong ?
Kind regards,
Nicolas

Does any body feel concerned ?

Similar Messages

  • Migrate ZEN 11 SP2 VM to ZEN 11 virtual appliance

    I am trying to migrate to zen 11 SP3 but I keep running into compatibility issues with the tools.
    My current system is one primary server running zen 11SP2 on OES2/SLES10 64bit and one 64bit SLES 11 satellite server in a branch office .
    What I have tried thus far:
    -I have tried adding a zen 11SP3 v-app to the zone and then retire the old OES VM but this is not supported b/c you can't have a SP3 machine in an SP2 zone.
    -I then tried adding a zen 11 SP2 v-app to the zone and run the SP3 migration tool but the migration tool fails b/c the tool does not support migrating to a v-app.
    Can someone give me some direction on how to move to SP3? Should I use the SP2 mig tool or is there an easier solution?
    Thank you,
    Brad

    My ultimate goal is to have a primary ZEN 11 SP3 server running on a ZEN 11.3 v-app (I do not want to buy a SLES license). Would it be easier to follow the replace/restore a zen primary server documentation? I was really hoping for a tool that would move this a long a lot faster.
    This is what I hoped would work:
    OES2 (unsupported SLES10)
    migrate to
    ZEN 11.2 v-app (supported SLES11)
    now use migration tool to go
    ZEN 11.3 v-app (supported SLES11)
    Thanks for the help,
    Brad
    Originally Posted by smflood
    On 09/07/2014 15:06, BPainter wrote:
    > I have read through that documentation and I do believe it will be
    > straight forward once I'm to that point. My current primary server is
    > an OES2 virtual machine - this machine doesn't have a supported upgrade
    > path to 11.3. So my thought process has been to use a ZEN 11.2 virtual
    > appliance and then migrate the data from my OES2 machine. After the ZEN
    > 11.2 v-app becomes the primary server I then add the ZEN 11.3 virtual
    > appliance and run the migration utility to migrate to 11.3. I haven't
    > found in the documentation where it deals with this sort of
    > migration/upgrade. The ZENworks 11 Server Migration Guide states to use
    > the setup.sh -R from the media to perform a migration, but this fails
    > because migrating from my OES2 server to a virtual appliance is not
    > supported. So how do I migrate my OES2 server to a ZEN 11.2 virtual
    > appliance?
    You can't use the ZENworks Server Migration tool to migrate to (or from)
    a ZENworks Virtual Appliance.
    Are you trying to use the ZENworks Virtual Appliance as a stepping stone
    to your final destination or is it your final destination?
    There's no need to migrate from ZENworks 11 SP2 on OES2 to a ZENworks 11
    SP2 Virtual Appliance as you can install a supported Linux (can't be
    Windows since you have OES2) OS (I'd suggest SLES11 SP3) on another
    machine (could be virtual) and then ZENworks 11 SP2 followed immediately
    by the 11.2.4 Update (to support SLES11 SP3).
    See
    https://www.novell.com/documentation....html#bookinfo
    for the Migration Guide.
    HTH.
    Simon
    Novell Knowledge Partner
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below. Thanks.

  • Can ISE 1.2 Virtual Appliance assign VPN address pool like ACS does?

    Dear friends,
    I have observed that Cisco ISE Virtual Appliance (VMware) can act as a RADIUS server in the same manner as ACS does, but I cannot find the way of assigning an IP address to a remote VPN client (only assigning a VLAN).
    At this point I don't know if it is strictly necessary to have the IP address assignment for the remote VPN clients done in the external firewall (i. e. Cisco ASA) in this case.
    Is there any way of defining an IP address pool in the ISE itself for VPN clients authenticated against that ISE?
    If the answer is not, which ones could be the options for that assignment other than the ASA pool assignment? Could it be possible defining the corresponding address pool in an internal DHCP server that could provide the IP address to the VPN client after successful authentication through ISE?
    Any help would be really appreciated to clarifying these questions.
    Thank you and best regards.

    Please find the link below for the may help you to get the answer related to comparision and even for deployment.
    http://pmbuwiki.cisco.com/Products/ISE/Technical/Design-Config/Guest_and_Web_Portal_Services

  • Error when installing virtual appliance for r12.2.4

    Hello
    I have downloaded Oracle Virtual Appliance for Oracle  E-Business r12.2.4 in a following step by step manner but I am running into an error.  As per the readme, I have gone through the Note:1928303.1 but it does not address the issue.
    That said, is there any comprehensive, step by step document that outlines installation and implementation of Oracle Virtual Appliance for r12.2.4?
    Below are steps I ran.
    Step 1:  Downloaded and Installed Oracle Virtual Box version 4.3.22.
    Step 2:  I want to install Oracle EBS r12.2.4 single node installation on My Windows 8.1 64 bit laptop with 1 TB of HDD and 8GB RAM.
    Step 3:  Downloaded following files for single node vision appliance.
    There are two zip files for each part, so I downloaded total 16 zip files.
    V52470-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 1 of 8) Linux x86-64
    V52471-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 2 of 8) Linux x86-64
    V52472-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 3 of 8) Linux x86-64
    V52473-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 4 of 8) Linux x86-64
    V52474-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 5 of 8) Linux x86-64
    V52475-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 6 of 8) Linux x86-64
    V52476-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 7 of 8) Linux x86-64
    V52477-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 8 of 8) Linux x86-64
    Step 4:  Unzipped these files
    Step 5:  After unzip, unzipped filename looked like following.  So I removed the last digit in the extension so that Oracle virtual box can recognize .ova extension.
    Unzipped file name:
    Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.01
    renamed to
    01_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova
    Step 6. In Oracle virtual box, attempted to import these ova files using "Import Appliance".   This is when I am getting following error.
    Oracle VM Virtual Appliances for Oracle E-Business Suite (Linux)
    Failed to import appliance C:\ova\EBS\INSTALLATION OPTIONS\Option 1 Single Node ALL\0_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.
    Could not create the imported medium 'C:\Users\ova\VirtualBox VMs\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk'.
    VMDK: Compressed image is corrupted 'C:\Users\ova\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk' (VERR_ZIP_CORRUPTED).
    Result Code:  (0x80BB0004)
    Component: Appliance
    Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
    This is happening with each and every file in above list. 
    Please advise what am I missing?  And if there is a comprehensive document somewhere that outlines details about implementation.  The above mentioned metalink note is not enough.
    Darsh

    You need to merge all of the downloaded files first, before importing into Virtualbox. Google for my blog for detailed steps.

  • LMS 4.2.2 virtual appliance fresh install : DCR Server Error

    Hello,
    I have installed a new version of LMS 4.2 on virtual appliance (VMware 4.1) and I have an issue.
    When I go the "Device Administration --> Manage Device State" I have the following error :
    Server Error
    Error
    Error in communicating with DCR Server. For more details click here.
    DCR Server may be down. Please start the DCR Server and then refresh the page.
    Following the details link I have : (I did all the check written below).
    DCR Server Error
    The communication error may be due to the following reasons:
    The DNS resolution does not match with server assigned IP Address. Workaround: DNS resolvable IP Address should be same as server IP Address. DHCP is enabled in the server. Workaround: DHCP should be disabled in the server. The server’s original IP Address may have changed. Workaround: Restart Cisco Prime Daemon Manager. CTM registry corruption has occurred due to rebooting the server without stopping the Cisco Prime  Daemon Manager. Workaround: Delete the ctmregistry and ctmregistry.backup file in  NMSROOT/MDC/tomcat/webapps/cwhp/WEB-INF/LIB and then restart the Cisco Prime Daemon  Manager. DCR Server and related process might be down. Workaround: Check the processes to make sure DCR Server is running, and restart it if not. The hostname change is not done by the hostnamechange.pl in LMS. Workaround: Hostname change should be done using NMSROOT/bin/hostnamechange.pl in LMS. LMS self signed certificate would have been expired. Workaround: Regenerate the certificate and restart the daemon manager.
    I try to reinstall LMS 4.2 with or without patches 4.2.1 and 4.2.2 I always have the same problem. The DCR server process is running.
    Here the result of the show application status LMS in SSH :
    S-CISCO-LAN-MS/sysadmin# show application status LMS
      Process               State                                     Pi
    d
      ESS                   Program started - No mgt msgs received    27
    14
      EssMonitor            Running normally                          29
    50
      EventFramework        Program started - No mgt msgs received    32
    95
      SyslogCollector       Running normally                          32
    96
      RMEDbEngine           Program started - No mgt msgs received    32
    97
      DfmBroker             Running normally                          34
    24
      DfmServer             Running normally                          36
    62
      DfmServer1            Running normally                          36
    63
      FHDbEngine            Program started - No mgt msgs received    36
    64
      EPMDbEngine           Program started - No mgt msgs received    40
    81
      EPMServer             Running normally                          42
    20
      AdapterServer         Program started - No mgt msgs received    43
    20
      AdapterServer1        Program started - No mgt msgs received    43
    21
      FHServer              Running normally                          43
    22
      INVDbEngine           Program started - No mgt msgs received    43
    23
      PMServer              Running normally                          4582
      IpmDbEngine           Program started - No mgt msgs received    4708
      UPMDbEngine           Program started - No mgt msgs received    4840
      UPMDbMonitor          Running normally                          4949
      ANIDbEngine           Program started - No mgt msgs received    4953
      MACUHIC               Running normally                          4990
      UTLITE                Running normally                          4991
      CmfDbEngine           Program started - No mgt msgs received    4992
      CmfDbMonitor          Running normally                          5104
      DFMLogServer          Program started - No mgt msgs received    5106
      DFMCTMStartup         Administrator has shut down this server   0
      FHPurgeTask           Never started                             0
      DFMMultiProcLogger    Program started - No mgt msgs received    5108
      CSDiscovery           Never started                             0
      DCRDevicePoll         Never started                             0
      CSRegistryServer      Running normally                          5109
      Tomcat                Program started - No mgt msgs received    5110
      TomcatMonitor         Running normally                          5206
      Apache                Running normally                          5567
      DCRServer             Running normally                          5580
      CMFOGSServer          Program started - No mgt msgs received    5641
      TISServer             Program started - No mgt msgs received    5642
      DFMOGSServer          Program started - No mgt msgs received    5757
      NOSServer             Running normally                          5795
      PTMServer             Running normally                          5796
      InventoryCollector    Running normally                          5797
      Interactor            Program started - No mgt msgs received    5885
      InventoryCollector1   Program started - No mgt msgs received    5886
      Interactor1           Program started - No mgt msgs received    6116
      UPMProcess            Running normally                          6117
      WlseUHIC              Running normally                          6118
      UTManager             Running normally                          6119
      VNMServer             Program started - No mgt msgs received    6120
      EssentialsDM          Running normally                          6121
      ICServer              Running normally                          6310
      EnergyWise            Running normally                          6581
      ConfigMgmtServer      Running normally                          6582
      PMCOGSServer          Program started - No mgt msgs received    6583
      ConfigUtilityService  Running normally                          6584
      CAAMServer            Running normally                          6585
      IPMOGSServer          Program started - No mgt msgs received    6586
      TopoServer            Program started - No mgt msgs received    6587
      LicenseServer         Program started - No mgt msgs received    6588
      FDRewinder            Never started                             0
      NameServer            Program started - No mgt msgs received    6591
      NameServiceMonitor    Program started - No mgt msgs received    6792
      EDS                   Running normally                          6870
      ANIServer             Running with busy flag set                7224
      UTMajorAcquisition    Never started                             0
      EDS-GCF               Running normally                          7257
      jrm                   Running normally                          7258
      DataPurge             Administrator has shut down this server   0
      IPMProcess            Program started - No mgt msgs received    7535
      CTMJrmServer          Administrator has shut down this server   0
      SyslogAnalyzer        Never started                             0
      ChangeAudit           Never started                             0
      diskWatcher           Running normally                          8381
    I run out of ideas...
    Regards,
    Abel

    Hi Afroz!
    Thanks for the quick reply!
    1) I checked files - and indeed, the third link of the file was empty.
    I restored contents of the same test server (as an attachment - original files) - now everything is working fine. Many thanks for your advice!
    Because of what could this happen?
    Current settings are as follows (i did not change them):
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
    -rw-r--r-- 1 casuser casusers 1037 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
    -rw-r--r-- 1 casuser casusers 1084 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
    [lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    -rwxr-xr-x 1 casuser casusers 1104 Aug 20 12:07 /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
    2) It was also noted that if address on the link "Inventory>Device Administration>Discovery>Schedule", then an error message appears:
    Error
    Error in getting the Discovery configuration information, please configure Standard / Custom Discovery and start the schedule.
    - no any records for Discovery Schedule and not accessible button Add (for add new Discovery Jobs).
    This is related errors?

  • LMS 4.2 virtual appliance: How to export archive devices configs on a network drive

    Hello,
    I will install a new LMS 4.2 based on a virtual Linux Red Hat appliance.
    I would like to export archive devices configurations based on /var/adm/CSCOpx/files/rme/dcma/shadow on an external drive.
    Do we have embedded tools on LMS 4.2 Linux to share a network drive or do we use NFS commands ?
    Thanks for your help.
    Patrice

    there are no such embedded tools.
    I am awaiting Ciscos return with a solution for bringing the backup out of the VA (Virtual Appliance) and to a safekeeping place.
    Same issue all around - the VA is now a client only !
    I saw a hack around the SCP user inorder to use WinSCP for faster file browsing etc, and that might work, but I want a supported fix for this issue. And by that I mean Cisco needs to tell me what can be done and how its supported.
    please share any knowledge you might get on this topic.

  • Demo License key issue in Cisco Content Secuirty managment Virtual appliance

    Hi,
    I have installed a Cisco content security management appliance for customer evaluation. I have downloaded 45 day demo license key but unable to update the license key neither in GUI nor in CLI. I have referred installation guide and user guide but did not helped at all.
    Snapshot from GUI

    Would suggest to re-copy and paste the XML license - as most likely you have extra white space that is causing the malform when pasting/loading.  If using Windows, try avoid using wordpad --- and use Notepad++ or similar.
    http://www.cisco.com/c/en/us/support/docs/security/email-security-virtual-appliance/118301-technote-esa-00.html
    -Robert

  • Is there an associated Linux GUI Desktop available with the VM Virtual Appliances for Oracle E-Business Suite 12.2.4 64 bit or is it all command line?

    I have downloaded the 16 pieces of Oracle VM Virtual Appliances for Oracle E-Business Suite (12.2.4) for x86 64 bit V52470-01 Parts 1 & 2 thru V52477-01 Parts 1 & 2 and unzipped and created the .ova.
    I then imported that into VBox 4.3.22.
    I went thru and changed the passwords for root, oracle, and applmgr as requested and entered a static IP.
    I have not configured the DB or Applications yet.
    However, I want to know if there is a typical GUI Desktop that can be brought up.
    Thank you.

    I have not been able to find a GUI desktop - I believe it is disabled or not included in the media.

  • Virtual Appliance for Solaris 10

    I am planning to be running Solaris on windows with help of VMware player. Could anyone please guide me to the exact and recent download link for the disk image of preinstall solaris 10 virtual appliance.
    Since this would be my first hands on VMware and initial setup guide will be very much appreciated.
    Thank you!
    unix.sagi

    Try the Virtual servers on Sun's Developer site.
    http://developers.sun.com/solaris/downloads/solaris_apps/index.jsp
    or check out the OS category on VMware's Marketplace.
    http://www.vmware.com/appliances/directory/cat/45

  • Diagnostics / Connectivity from virtual appliance to vcenter Server FAILED

    Hi,
    I'm currently tryining to setup the Support Assistant (VSA) in our vSphere 5.1 environment. Registration to the vCenter was successful after some initial troubles. But when wunning thie VSA Diagnostics it fails at one point:
    Connectivity from virtual appliance to vcenter Server FAILED
    But on the VSA's console I can connect to the vCenter
    - name resoluttion is OK
    - vCenter is pingable
    - wget https://vcenter.domain.local   brings up an error regarding the vCenter's certificate:
    ERROR: cannot verify vcenter.domain.local's certificate, issued by `/O=VMware, Inc./OU=vCenterServer_2012.10.22_111554/CN=vcenter.domain.local/emailAddress=[email protected]': Unable to locally verify the issuer's authority.
    ERROR: certificate common name `VMware default certificate' doesn't match requested host name `vcenter.domain.local'.
    - wget https://vcenter.domain.local --no-check-certificate   works. Turns the errors above into warnings but connects and downloads the index.html.
    What am I doing wrong? Any help appreciated!

    Opened a SR with VMware and they've provided me with an unofficial updated version of the Support Assistant. This one fixed the failing connection to our vCenter. Now diagnostics fails on trying to connect to VMware, its working though. It's confirmed by VMware that this is just a cosmetic issue.

  • Upgrade path from Riverbed Whitewater V110 to AltaVault Virtual Appliance

    Hi,
    We have users on the V110 model of the virtual appliances of Whitewater (Riverbed edition) that haven't transitioned to the NetApp varients as yet.
    What would be the upgrade path if they wanted to keep running a virtual on-premise SteelStore/AltaVault?
    Would there need to be an intermediate step to SteelStore 3.2 between Whitewater (3.1.2a) and AltaVault?
    Thanks
    Garth

    Hi Garth,To get to the AltaVault release, you'll do this in 2 phases. 1. Upgrade the software. This is done by downloading the 3.2.2 code from mysupport.netapp.com and then installing it on the current v110. Use the Configure > Maintenance > Service page to stop the optimization service, then use the Configure > Maintenance > Software upgrade page to update it with the downloaded image. Reboot after the update is done. 2. Migrate to AltaVault software. This is done by following the instructions in Appendix A. of the Install Guide for Virtual Appliances:https://library.netapp.com/ecm/ecm_download_file/ECMP12455064 Regards,Christopher

  • Cisco ISE Virtual Appliance HyperV Support

    Hi,
    ISE Virtual Appliance Supports VMWare ESXi as Hypervisor. Is there any Plan on the roadmap that ISE will be supported on HyperV (or possibly XEN) in the future, because some customers don't have VMWare but using only HyperV.
    The same question may be for other Virtual Appliances as well such as vWAAS, vASA etc.
    Best Regards,

    David,
    There is currently no documentation on this process.  This is not a supported installation/upgrade/migration path so, therefore, any documentation would be third party, prepared by the partner or end user that has done this.
    If you're starting from a VM, you have the wrong approach.  You'll want to install from .iso for best results.
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Oracle VM Virtual Appliances

    Hi all,
    Oracle VM Virtual Appliances for Oracle E-Business Suite Deployment Guide, Release 12.2.4 (Doc ID 1928303.1)
    The docs said that:
    But when I login to root on my VM system, and run :
    [root@db etc]# cat /etc/oracle-release
    Oracle Linux Server release 6.6
    Does this mean the doc is not updated? or the /etc/oracle-release is not updated?
    Please help how to check.
    Thanks a lot,
    mk

    Hi,
    I know that this is an old discussion and you probably figured out the answer yourself.
    Just to publish an answer and close it, the document is not up to date with the software you downloaded.
    Nothing to worry about.
    Regards,
    Bashar

  • Question about ANM Virtual Appliance ESX support

    Hello,
    I have a question:
    I need to install ANM 5.2 on a virtual appliance (using the .ova file).
    What ESX and vSphere versions does ANM 5.2 support?
    I don't see any information regarding this on the release notes or installation guide.
    Thanks.

    Looks like the only requirement is Vcenter and Vsphere 4 client.  So version 4.0 and up is supported.
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/5.1/device_support/table/sdt.html
    ANM 5.2 and 5.1 includes a plug-in that allows you to integrate ANM into  a VMware virtual data center environment. VMware is a third-party  product for creating and managing virtual data centers. Using VMware  vSphere Client, you can access ANM functionality and manage the ACE real  servers that provide load-balancing services for the virtual machines  in your virtual data center.
    To use the ANM 5.2/5.1 plug-in, you must use VMware vCenter Server and  VMware vSphere Client 4.
    For more information about using ANM in a VMware virtual data center  environment, see the User Guide for the Cisco  Application Networking Manager 5.2/5.1.

  • Oracle BigDataLite Virtual Appliance confirmation

    I'm trying to follow the instructions for installing the
    Oracle BigDataLite Virtual Appliance
    Oracle BigDataLite Virtual Machine
    I'm running VirtualBox 4.3.6
    7-Zip 9.2
    Running on Windows 7 Home Premium 64 SP1 with AMD FX 8120 with 16 GB (a stock aspire M3450)
    And there seems to be a disconnect in the PDF for the quickdeploy, as if in the rush to create the quick deploy document something was left out, or the process was not tested before posting for download
    Specifically: from the PDF
    After all zip files are downloaded, extract them with 7zip.
    In Windows:
    Right-click on file BigDataLite-xxx.zip.001 file and select 7-zip->Extract Here
    The extraction will create the BigDataLite-xxx.ova appliance file.
    Well the above is NOT happening
    First the files are named at OTN as
    BigDataLite-2.4.1.001
    BigDataLite-2.4.1.002
    BigDataLite-2.4.1.003
    BigDataLite-2.4.1.004
    BigDataLite-2.4.1.005
    BigDataLite-2.4.1.006
    Not as the naming convention in the PDF documentation which is requesting a .zip.001 extension
    Can someone run a confirmation that a ova file can be created?

    Thanks for replying:
    I'm getting the correct checksum for 4-5-6
    What seems to be happening is that I'm getting a bad download
    Bad Checksum
    md5sum BigDataLite-2.4.1.001
    70728c177aee531710804183d9ba407b
    Not
    0eefb04ec725b2aba21c017f0c54ccfd
    md5sum BigDataLite-2.4.1.002
    fe8fd773feadc01b08f4cdc802b188db
    Not
    a19c4d8713a7ec0b765a831e710db04e
    md5sum BigDataLite-2.4.1.003
    997670eb5f5d9cd8c66f2a071415d738
    Not
    83f35179b44c58b50e2e19d36701b5df
    I'm downloading "yet again", even if you did get good files then could you do me the favor of downloading any of the three and confirming the issue?
    Possibly tossing a file in some dropbox app that works?
    I hate asking, but what you got at dev-days on media might not be the same?
    I'll give you a helpful for the response, but honestly I usually don't mess these things up, get to one reston way myself... and believe there is an issue
    But again thanks
    BigDataLite-2.4.1.004, BigDataLite-2.4.1.005, BigDataLite-2.4.1.006 were correct

Maybe you are looking for

  • DVD burning error in Premiere Elements 11

    I recently filmed a friend's memorial service for their family.  I have footage from two different cameras that I have edited in Premiere Elements 11, for the purpose of making a DVD of the service. I run into a problem when I try to burn the project

  • Firefox will no longer save a Bitmap. When I click "SAVE AS" , nothing happens.

    When I right-click on an Internet image, and on the drop-down box, select SAVE AS. No box appears to show the current name of the image, or to allow me to enter a name of my choice. ... and image is not save anywhere. Up to now it has always worked p

  • FCP not recognizing PDS layers

    I'm trying to import layered PSD files into FCPX 10.1.4. FCP thinks it is a flat image. I don't see the layer icon in the top left corner. But it does show the .psd extension. I'm using PS CS5. The PSD is RGB, 8 bit. Image size 1920x1080 (same as my

  • Print - color management dialog box - how to print

    I am a bit confused with the print CS5 color management settings... When printing on my HP Design Jet 90 I select I click "print settings in the CS5 print dialog and select "Application Managed Color"  in the prinder driver. However the PS print dial

  • While trying to set up icloud on my pc

    While trying to set up icloud on my pc, I get a message to set up email account in Outlook. I used a new gmail account.  I get to a point that says "Your setup couldn't be started becasue of an unexpected error" what do I do?