Virtual chars does not take part in update rules

Hi
Friends my question is Virtual Chars Does not take part in update rules than why to include it in data target??? directly we can include it at query designer .
Thanks
Asim

Hi,
Adding a charachteristics is to have a place holder in your data target. In virtual char you make use of this field memory pointer to populate the data for this field.
Hope this helps for you.
Thanks,
Arun

Similar Messages

  • Request does not contain any saved update rules; rollback not possible

    Hi,
    In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
    It failed due to activation error SID Generation.  But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
    Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
    If we try to delete, it shows job has been completed successfully with the following message:
    Job started
    Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
    Delete running: DataStore object ZREBATE, from 630,138 to 630,138
    Delete is scheduled; Selection conditions were substituted
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Job finished
    I went to the table RSICCONT and checked the mentioned request.  But I couldn't find delete option enabled.  Even our basis team doesn't have authorization to delete the  mentioned request from the standard table RSICCONT.
    Request you to please help me how to handle this.
    Regards,
    Antony Jerald.

    Hi Antony,
    Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
    1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
    2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
    3) change the records with respective values and active the request again
    Regards
    Jagan

  • I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • I am updating my iPhone4s with the most recent OS7.3software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    i am updating my iPhone4s with the most recent OS software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

    I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

    Sign out of your account on the iPad, restart the iPad and then sign back into your account.
    Settinsg>Store>Apple ID - tap the ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    After restarting go to Settings>Store and sign in again.

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HS.EXP does not take into account the Value member and the source

    Hello,
    The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
    The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
    HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
    A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
    The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
    And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
    To sum up: I obtain a data of 50 instead of 25.
    I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
    Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
    Thanks in advance.
    Regards,
    Julien

    Hi,
    I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
    My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
    The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
    Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
    I tend to think of such a design, as a practice to avoid.
    --Kostas                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Why the itunes does not take my ipod 4g

    why the itunes does not take my ipod 4g

    this worked for me, below.
    from:
    http://docs.info.apple.com/article.html?artnum=93716
    Reinstall the COM interface for the iPod Service
    1. Quit iTunes and any running iPod Updater.
    2. Click iPodService.exe in the Windows Task Manager window.
    3. Click End Process.
    4. Click Yes.
    5. On the Start menu, click Run. Note that the Run windows may appear behind the Windows Task Manager window.
    6. Enter this text (including the quotation marks):
    "C:\Program Files\iPod\bin\iPodService.exe" /service
    7. Click OK in that window.
    8. On the Start menu, click Turn Off Computer.
    9. Click Restart.
    If the iPod is not working with iTunes or the iPod Updater, proceed to the "Quick Fix" section below.

  • HT4972 My general settings menu does not have a software update option- how do I update? Thanks

    Hi,
    I am really struggling to update my iphone software. I believe that I am currently on version 4.2.1 and would like to update yet my general settings menu does not offer a software update option.
    What would be the best steps to take?
    Any help would be great.
    Thanks
    T

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Dreamweaver Design view does not show parts of the page

    Hello all,
    I was working on a page update - page was created using a
    template so
    that the client can add content with Contribute - and have
    discovered
    that suddenly whole sections of the page are no longer
    visible in Design
    Mode. This caused me some panic until I viewed in code view
    and found
    everything still in there. Viewing in browser shows the page
    there in
    entirety too, and uploads just fine. But no matter what I do
    - restart
    the program, restart the computer - nothing changes, the page
    design
    does not show parts of this page. Everything is in an
    editable area and
    should be visible.
    I have been editing the code as that was my only option, but
    now I have
    heard that my client cannot view those sections of the page
    in her
    Contribute either.
    The page is here:
    http://www.craft-design.ns.ca
    Any help would be gratefully received.
    Thanks
    Ellie

    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    <th> deprecated? Certainly not.
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    Normal template files have two editable regions in the head
    of the page -
    doctitle, and head
    The one you linked does not.
    That's what I was talking about.
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    I have stopped recommending it to my clients.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Ellie" <[email protected]> wrote in message
    news:[email protected]...
    > Thanks Murray,
    >
    > I see all this.
    >
    > (I find it strange that it is now like this, as I
    understood that th was
    > depracated? So I went through and removed them all.)
    >
    > There are editable regions in the page as it has been
    working for the past
    > year and a half. I find that after an amount of editing
    by Contribute
    > users, the pages do tend to fall apart.
    >
    > I will have to remake the template and remake the page
    from that.
    >
    > Strange thing is it was working perfectly well before.
    >
    > Thanks for the help, Murray.
    >
    > Contribute sounds a great thing, but is a huge pain and
    ends up costing me
    > money fixing the messes my clients end up making, though
    this should not
    > be possible...
    >
    > Ellie
    >
    > Murray *ACE* wrote:
    >
    >> You have no editable regions in the head of that
    page - why is that?
    >>
    >> As for the display in DW, perhaps it's the 175
    validation errors that the
    >> W3C validator finds on the page?
    >>
    >>
    http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
    >>
    >> Most of these are serious coding problems....
    >>
    >

  • Virtual keyboard does not open when attempting to type in username or password fields

    virtual keyboard does not open when attempting to type in username or password fields. This occurs on multiple websites. HTC Incredible on Verizon network. Current updates on phone. Fennec update dated 9-20-2010. This used to work a couple weeks ago.

    Thanks for the report. We're working on fixing this; you can see the current status here: https://bugzilla.mozilla.org/show_bug.cgi?id=591047
    This bug should be fixed within the next week or so, and will be fixed in the upcoming beta release.

  • HT4623 My general settings page does not have a software update option, any ideas on what to do?

    My general settings page does not have the software update option on it does anyone know what I need to do? Was trying to update iOS

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to follow the second part of that article and update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    If it's a first gen iPad then it should be update to iOS 5.1.1, if it's an iPad 2 (or 3) then it will update to iOS 6 (so you will lose the built-in YouTube app and the Maps app will change).

  • HT4623 my phone does not have the software update option

    my ipone 4 does not have the software update option?

    Do the following:
    Open the App Store app on your phone and update all your apps so the will work with the new iOS.
    Connect your phone to your computer and open iTunes.  If prompted that there is an update available, decline.
    Sync with iTunes to create a new backup and transfer any purchases from your phone to your iTunes library.
    Import your photos to your computer for safekeeping as explained here: http://support.apple.com/kb/HT4083.
    Go back to iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update (or Update).
    This will download iOS to your computer (which may take a while), then install the update on your phone.  Pay attention to the progress information in iTunes on the top of the screen, and any information that appears on your phone during this process to be sure you don't disconnect your phone prematurely.

  • I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
    Mylenium

  • After doing a Google search - when I click on a link it does not take me to the corect website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

    After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

    After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

Maybe you are looking for