Virtual controls no longer 'enabled' in capture window CS4. JVC Mini DV deck connected thru F-wire.

I've been using my JVC MiniDV(and S-VHS combo) deck to digitally ingest footage via the Capture window on CS4 (originally on Prem Pro 1.5).. but the 'transport' controls (the virtual ones) are no longer enabled. 'Tho it's connected via Firewire to the computer and is definitely being 'seen' by the whole set-up... I cannot stop, start, pause, record etc as I used to be able to by using the virtual transport controls.
I'm having to take the haphazard route of ingesting footage via the RCAs out the back of the unit via a Canopus/Grass Valley i/o box - I've set the 'device control' options (in the capture window) to DV/HDV Device Control.... and the 'Capture Settings' are set to DV... the 'current device' is stating JVC Standard (as it should) so I don't know why I'm not getting the functionality I should have.
ANY help, previous experience, fixes etc would be MOST graciously received and appreciated!
Thanks
[email protected]
Jon England

Hello Jim - I'm really appreciative of you taking the time to reply to my query/problem... I'm not familiar with the Adobe forum method of communication but, despite EVERY option on the 'answer' page, I cannot see, nor read your answer... there's a part which says '[Moved to CS4 and Earlier.] which I find very frustrating!!
any chance you could send your 'fix' to me at [email protected] please>>
Many thanks! Jon

Similar Messages

Since the capture media is no longer working for capturing Windows 8.1 images,

Since Copy Profile doesn't work when you use the sccm capture media to capture a Windows 8.1 image
This is how I been capturing my Windows 8.1 image.
1. Manually sealing the image. Logged in as Administrator, I run, C:\Windows\System32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:"C:\Windows\System32\sysprep\sysprep64-81-std.xml" this points to my answer file which contains copy
profile=true. Once Windows is shutdown, I boot directly to PXE, using a TS of the method found in the link below.
2. I then use this method to capture the image directly to a wim file. http://blog.coretech.dk/mip/capture-none-syspreped-image-using-sccm-running-imagex-from-a-ts/
I'd like to hear how others are capturing there Windows 8.1 images, because I am always looking for a better method.

Adding more info:
Deployment Image Servicing and Management (DISM) Command-Line
http://msdn.microsoft.com/en-us/library/jj980032(v=winembedded.81).aspx
Sysprep (Generalize) a Windows installation
http://technet.microsoft.com/en-us/library/hh824938.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

Something has changed recently and I haven't figured it out. My 2 Windows XP computers are no longer able to print via Bonjour. I have tried removing and reinstalling Bonjour. Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop. Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que. Both XP computers have no problem using the internet via the Base Station. One is wired and one is wireless. Thoughts?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

Tape deck pauzes when closing Log and Capture window

Hello,
I've got a weird situation here. I have a Hi8 tape deck (Sony Evo 9800P) hooked up on Final Cut Pro 6 and I control it by remote.
It works great, except when I close my Log and Capture window it sets the tape deck on pauze. Even when I already stopped the tape.
It's not too bad, but I find it interesting to figure out why it does that.
Does anyone experienced this before or do you have a suggestion?
Thanks in advance

I don't know that deck, but if it is like most sony products, you can probably change that to "stop" instead of "pause."
When you close log and capture, you are relinquishing control of the deck and it is going to its default.

Red record button isn't active in transport controls in capture window

My camera is connected to my PC via firewire cable. When I open the capture window in Premiere, and I hit play on my camera, I don't see video in Premiere's capture window and the red record button is inactive so I can't capture. Yet when I connect or disconnect the firewire cable, I get the audio indication of each action from my computer. This is the first time I've seen this happen. Any ideas?
Also, I just noticed, and this would be expected, at the top of the capture window it reads, "capture device offline" and yet the controls that are active (RW, step back, play, step forward, FF, pause, stop) all work and control my camera

I figured it out. For some reason my capture format was set to HDV instead of DV.

[Forum FAQ] How to show Windows Update in Control Panel in Clean Installation of Windows 10 Technical Preview Build 9926

Scenario
If you performed a clean installation of the new Windows 10 Technical Preview Build 9926, you would find Windows Update is only available in
Settings and is hidden in Control Panel by default. However, Windows Update is still available in Control Panel if it is an upgrade version of Windows 10 Technical Preview Build 9926.
Solution
After the comparison of the two different version, the differences is the following registry:
HKLM\SOFTWARE\Microsoft\WindowsUpdate\UX\IsConvergedUpdateStackEnabled
In clean installation version:
In upgrade version:
The method to make Windows Update show in Control Panel in the clean installation of Windows 10 Technical Preview Build 9926:
Edit the REG_DWORD value of IsConvergedUpdateStackEnabled from 1 to 0.
Applies to
Clean installation of Windows 10 Technical Preview Build 9926
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

We’ve seen a few forum posts talking about changing registry keys to alter the update experience we shipped in Technical Preview build 9926. There are a couple of reasons that we don’t recommend doing things like that.
First, the default experience is what we’ve tested across not just the Windows 10 team, but across all of Microsoft before we released it to you. That doesn’t mean that you won’t still find bugs, but it’s definitely the code that’s been most thoroughly
tested. Changing things back to older versions is risky because the combination of those old settings with the rest of Windows 10 is not something that’s been validated or supported, so we can’t predict the side effects. It’s possible that changing registry
settings related to update could cause a machine to no longer be able to get new updates or Technical Preview builds.
The other reason to avoid changing the default update experience is that a lot of update-related code is actually being re-written in order to scale across the variety of different device types Windows 10 will support. Since Technical Previews are
a work-in-progress, some code that may still be in build 9926 won’t actually ship in the final version of Windows 10 that we provide to all our customers, so trying to re-enable that code temporarily won’t provide a way to accurately assess Windows 10’s update
capabilities.
We want to hear your feedback! We’re sharing Technical Preview releases early so we can understand exactly how customers are using our software and make sure we are designing our experiences to address those scenarios. The more
specific the feedback, the more helpful it is for us – saying “I hate the new Windows Update UI” isn’t very useful, but when we see “I need to be able to tell Windows Update to grab updates from WU itself and not from my internal corporate server, so the new
Windows Update UI is painful for me”, we can actually understand what changes we could make to solve those specific problems. We can’t promise to fix everything that everyone asks for – and sometimes what one customer wants is exactly what another customer
doesn’t want – but the more you can help us understand why you want something changed, the better we can try to meet those needs.
Thanks for listening, and we look forward to hearing your responses.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/warning-disabling-the-new-windows-update-ui-may/dc846517-eca0-4960-b0ff-1eb7227223f5

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

I need my product key to enable to activate windows vista home premium and i can't see iton certific

I need my product key to enable to activate windows vista home premium and i can't see it on Certificate of Authenticity label

Once the label is worn, you cannot get another key for free. You are better to order a recovery disc set from HP, then you dont need a key
You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Grey horizontal bars in capture window

I'm trying to capture into Premiere 5.5 with a Sony DSR-11 DVCam Deck. In the log and capture window, I'm able to control my DV deck just fine, but the footage plays with horizontal grey bars across it. Beyond rebooting and trying unplugging and replugging, and running the cleaning tape, I'm not sure where to start. I also double checked all the sequence settings, etc, and they're all set up for DV NTSC.
For background, I'm running Windows 7 Pro, SP1, 64 bit. My processor is an Intel Core 2 6300 @ 1.86 GHz. I have 8 GB of RAM. My graphics card is a NVIDIA Quadro NVS 440.
Any ideas?

Speaking of a legacy driver...
Legacy Driver and Capture http://forums.adobe.com/thread/869277
- And a Picture http://forums.adobe.com/thread/727755

Color bars in capture window?

I'm currently trying to log and capture from a Cannon miniDV ZR700 via fire wire400. Although I can control the camera, all I see in the capture window is color bars? Am I missing something. I've done this before, I've also seen this before but for the life of me I can't remember what the problem was.

jgoodwin66 wrote:
Well, I'm not sure what happened. . . I disconnected my external drive. Thanks for your help!
You have a Canon product, that is what happened; Canon products don't play well in the digital sandbox with other devices. When you disconnected your external drive, the Canon felt like playing along. You should probably add another firewire bus through your express card slot, if your MacBook Pro has it.

Enabling Pop Up Windows in Internet Explorer 5.2.3

Does anyone out there still use Internet Explorer for mac or remember how. I use Safari, but have since had to download Explorer for one particular program that only works with Explorer. I need to view some reports and was told I could only do so if I enable pop up windows. For the life of me I can not figure out how to do this or if it is even possible.
Any help would be greatly appreciated.
Thanks!

Thanks for the reply, but can you help clear something up for me? If I am able to view everything on this program with my mac such as catalogs, order lists, etc. why am I unable to view one part of it?
Is it possible that mac can read part of a program, but not all, especially if the program is supposed to work exclusively with Explorer?
It impossible to know the exact reason. It depends on how the site is programmed. It's possible for the site to check what web browser you are using and only work with the desired browser. It's possible to include ActiveX, a Microsoft thing, that will only run on a PC.
There are a lot of Microsoft only features in IE that other browsers do not support. M$ adds these feature so you are forced to buy a PC to get the site to work.
Is this a generally available site? Could you post the address?
Have you tried FireFox? getfirefox.com
Opera & iCab let you configure what browser they will emulate. You could try
them.
While an expensive solution, you could buy Virtual PC to run windows on you PPC. For the intel macs, you could get Parallels.
Robert

Can't Get Rid of Blank Capture Window

I have been capturing video from VHS tapes from a VCR player through a Canopus ADVC-55 analog to digital converter. I use Windows 7. This was working OK, but at one point Premiere Elements 9 froze during the capture and I aborted it through the Task Manager. When I reopened PE9 a blank capture window blocking the work area appeared (see Figure). The window cannot be closed or moved, but can be resized.
I have made several attempts to get rid of it.
- I started another video capture, which opened a new capture window without getting rid of this blank one.
- Starting a new project does not get rid of the window.
- I uninstalled and reinstalled PE9. The blank window still opens when I start the program!
The program is still usable by resizing the window to such a small size that I can access the controls, but I would appreciate any advice in getting rid of the stupid thing.

Great news!
That is the first thing that I think about, when there is some hang in the GUI.
Next, launching PrE and IMMEDIATELY holding down Ctrl+Shift+Alt (not sure that all are required, but that works for PS and PrPro), until the program launches, and then accepting the Reset of Preferences.
Third, would be to look at the video driver, and compare that with the very latest on the nVidia, or ATI/AMD Web site, and install the latest.
Glad that it cleared things for you, and good luck,
Hunt

Capturing problems CS4-Windows 7-JVC

Hi there.
I am working for a company that uses a 64-bit Windows 7 computer equipped with Premier CS4. We recently moved offices and had to unplug everything. When we plugged it all back in the Firewire ports stopped working. We changed the Firewire card and the computer will now recognize 1 of our 2 camera, but will not capture on Windows Live Movie Maker or Premiere.
The small camera I have I never captured with before. I always put the tapes in the larger JVC and that has completely stopped being recognized by any computer.
When I go to capture with the small JVC, the capture window recognizes the camera, shows me the control from the camera, play, stop etc. but will not capture any frames, and the screen is black. I have the camera set to DV and I am using an i.link cable for a JVC GR-HD1U.
I do not get the blue screen that is typical before you hit play on the camera either.
Maybe this is just a setting issue on Premiere?
I am honestly not sure what preset to go with on Premiere.
ANY and ALL suggestions are welcome and will be tried. I believe the issue lies with what the camera settings are and what I should set the new project for.
Thank you!!

Maybe that was all a bit confusing so I will simplify my issues. Maybe I can get some more feedback! Really appreciate you reading this, really need some suggestions.
We recently unplugged everything and moved offices and my JVC GY-HD100 stopped working, and now I am trying to get a JVC GR-HD1 I am unfamiliar with to work on Premiere Pro CS4, 64-bit Windows 7 and play a tape I had shot with the JVC GY-HD100.
JVC GY-HD100: Firewire port stopped working indicating what we think was a power surge while moving computer system. Therefore we changed the card and it is now recognizing devices just fine. Firewire cord still works with other devices, but camera will not show up on any computer with any firewire cord. The port in the camera is probably fried and after a phone call, JVC said they are able to fix this issue. (I just figure this background information may be useful)
JVC GR-HD1: My last hope for capturing a really important video. Premiere recognizes the camera, the computer asks what I would like to do with the device. I I have tried every combination preset on Premiere. (really did!) thinking it might have been me. Even the ones set for the other camera. Things look good all the way up until I play and try and capture. Premiere will control the camera, but the preview screen stays black, and nothing captures. I get the message 'recorder captured no frames' when I eventually cancel.
I also tried the Legacy suggestion from John (Thank you!) with no success.
I have also updated my NVIDIA device drivers.
Any suggestions?
Thank you!!!

The storage where the virtual hard disk is located does not support virtual hard disk sharing. (Hyper-v / Windows 10 Enterprise Tech. Preview)

I am attempting to create new virtual machines in Hyper-V on Windows 10 Enterprise Tech. Preview and I am continually getting the error "The storage where the virtual hard disk is located does not support virtual hard disk sharing.". I am not trying
to setup a shared VM or VHD, just a basic VHD.
Does anyone have any suggestions on how to resolve this issue?

This issue is listed in the release notes and currently there is no fix on our side. Have to wait for the next build.
"Known issues in Build 10049
If you have Virtual Machines hosted on your PC running Windows 10, you will want to move to the Slow ring and wait for the next build as this build breaks the ability to run VMs. "
The statement is miss-quoted. It was about Hyper -V. An update KB3053898
was released to fix that
See the blog
Here :
excerpt........notice the statement has been crossed off in the blog.
UPDATE: You cannot enable Hyper-V on this build. If you have Hyper-V already enabled and you upgrade to this build, Hyper-V will continue to work. <del>If you have Virtual Machines hosted in Hyper-V on your PC running Windows 10, you will want to move
to the Slow ring and wait for the next build as this build breaks the ability to run VMs.</del>

Virtual controls no longer 'enabled' in capture window CS4. JVC Mini DV deck connected thru F-wire.

Similar Messages

Maybe you are looking for