Virtual Desktops on 2012R2
Hi,
I have a challenge to prepare virtual infrastructure on Windows 2012R2, i need to deploy 4 virtual instances free on server which will be connected to thin clients. Please advice on the same, also let me know what all i have to buy and what is free with
R2
with thanks
Arun
First you have to understand that Server 2012R2 does not include any license for VDI, only for virtual Windows Server, a Standard Edition includes 2 Lics if you use the Host only for Hyper-V and DataCenter Edition gives you unlimited rights.
Here you find a good sarting Point for all needed Informations and links to Labs etc..
Virtual Desktop Infrastructure
http://technet.microsoft.com/en-us/windowsserver/ee236407.aspx
http://www.microsoft.com/en-us/server-cloud/products/virtual-desktop-infrastructure/deploy.aspx
Licensing
http://download.microsoft.com/download/1/1/4/114A45DD-A1F7-4910-81FD-6CAF401077D0/Microsoft%20VDI%20and%20VDA%20FAQ%20v3%200.pdf
On MVA you also find some Trainings for VDI and Server 2012R2
http://www.microsoftvirtualacademy.com
a good Blog
http://thewolfblog.com/2014/03/26/deploying-vdi-for-rds-2012-2012r2-part-i/
http://thewolfblog.com/2014/04/14/deploying-vdi-for-rds-2012-2012olr2-part-ii/
http://thewolfblog.com/2014/04/19/deploying-vdi-for-rds-2012-2012r2-part-iii/
cheers
Udo
Similar Messages
-
2012R2 VDI how to change "local virtual desktop creation location" for collection
Hi,
I want to change "local virtual desktop creation location" for existing collection but this setting is grayed. This location is not exists anymore and I cannot add new VM's to collection.
If there is no way to do this if it possible to create new collection and move old VM's there?
Thanks!Hi Sergey,
I assume that you mean virtual desktop storage location, which I don’t think that we can change this setting for an existing collection.
You can create a new collection, during the creation process, you will be able to select a different storage location for new VMs.
More information for you:
Single Image Management for Virtual Desktop Collections in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/10/29/single-image-management-for-virtual-desktop-collections-in-windows-server-2012.aspx
Geek of All Trades: VM-Hosted RemoteApps - New Best Practice for Virtual Desktops?
https://technet.microsoft.com/en-us/magazine/jj554307.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Remote desktop virtualization setup - can't identify virtual desktop state
I'm experimenting with MS's vdi offering and have hit a problem when selecting the Remote Desktop template virtual machine.
The Error (translated from spanish)
'Cannot identify the virtual desktop state. Verify that the remote desktop virtualization host server hypervsrv is available on the network and that the virtual desktop VDIBaseWin7 is closed'
What I've got:
A Windows 2012 R2 with hyper-v
A Windows 2012 Std on which I am trying to configure Remote desktop virtualization
A virtual machine with Windows 7 pro. The machine is basic win 7, patched and has been sysprepped.
How I get there:
From server manager I open Remote Desktop Services > from the wizard área above I click on (3) Create remote desktop collection
This opens the wizard where I choose a name for the collection
I then select 'personal virtual desktop collection' and 'créate and adminístrate virtual desktops automatically'
The wizard then presents me with a list of virtual machines. I then select the sysprepped wind 7 pro machine (which is shut down naturally). I've tried generating the win7 machine as a generation 1 and generation 2 - the result is the same.
The wizard pauses for a few moments and then displays:
'Cannot identify the virtual desktop state. Verify that the remote desktop virtualization host server hypervsrv is available on the network and that the virtual desktop VDIBaseWin7 is closed'
Neither the event log of the hyper-v server, nor the rds server, report anything.
So, my question is, whats failing? Its obvious that its trying to perform some action and is failing. The question is, whats it trying to do. If I knew what it was doing then I could investigate the cause, but the error doesn't say much.
Anyone have any ideas?strange, This question has been moved to the remote desktop forum. I would have thought this forum was more for the traditional terminal server type questions.
Anyway, I found a solution to my own problem. It turns out to be the mix of 2012R2 for hyperv and 2012 std for the broker, etc.
I set up another server with 2012r2 and followed the same sequence to configure it with the rds roles and it worked perfectly. -
Hello everyone,
I created a virtual desktop collection with a name format like this , prefix = VDI-, suffix= 1 .
so when I created the first VMs , I had VDI-1 and VDI-2 , later after recreating the VMs, adding new ones and deleting others, the suffix numbers are no longer in sequence , like I started having VDI-1,VDI-2,VDI-8,VDI-9.
I realized I had one problem that probably caused this, because when I delete a VM , I get a warning message:
"RD connection broker could not delete the computer account object from active directory."
so I searched about that error and I added the needed permissions and now deleting seems to work without any warning.
now I have two VMs, when I go through the wizard , the first page it shows I have 2 VMs but in the second page it shows I have 11 ! is there a way to reset the count ? if I delete the entire collection and create it again , will I have any problem with the
roaming users profiles ?
ThanksHi,
Thank you for your posting in Windows Server Forum.
You can specify the count for RDVH as how many desktop wants for particular host. You can do this “Specify Virtual Desktop allocation” while creating virtual desktop collection. Other than that you can also use PowerShell command to achieve your task.
For more details you can refer beneath article.
1. Fumbling through Windows Server 2012 Virtual Desktop Infrastructure (VDI)
2. Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki -
Error could not retrieve the virtual desktop template details
Dear Sir&Madam
I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
Best regards
Rawa ZanganaHi,
Thank you for posting in Windows Server Forum.
From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
You can run the following command line:
Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Hello,
i am using Firefox version 31. I have a problem with page setup margins. I need to use left
30mm; right 10mm; top 20mm; bottom 20mm. I am using VMware floating assignemnt linked clones
virtual desktops. After users log off - machines are deleted and users next time logs on get's brand
new VDI's. Users gets printers to VDI using login script from Active Directory.
Option Explicit
Dim strPrinterUNC, objNetwork
strPrinterUNC = "\\some_server\printer_number_1"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.AddWindowsPrinterConnection strPrinterUNC
WScript.Sleep (20000)
objNetwork.SetDefaultPrinter strPrinterUNC
Set objNetwork = Nothing
Each user have different logon script, because they use different printers (different printer names e.g. \\some_server\printer_number_2 ; \\some_server\printer_number_3 and etc. Page setup margins in Internet Explorer are ok. But how to make Firefox page setup margins as i need? For other options i have
used CCK2 Wizard 2.0.4 tool. It worked fine. Maybe i can put some information in C:\Program
Files\Mozilla Firefox\defaults\pref\autoconfig.js I have some usefull data in it allready. I
have found info that: "Setting print margins is done in the printer settings". I have a lot of
printers, so i can not set printer margins individualy for each of them. Now mozilla shows top,
bottom, right, left each 12.7 mm. What should i do if i have a lot of printers in enterprise
environment?Firefox has a profile folder that has preferences to save this. But the config that would need to be changed is:
print. save_print_settings = True - (default): Save the print settings after each print job
Locking that preference: [http://kb.mozillazine.org/Locking_preferences]
Or done manually:
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
Check these values accordingly and change them if necessary. -
Seems virtual desktops are overpromoted - and in fact not about virtual desktops (changing content on the desktops). The socalled virtual desktops are right now
no more than app switching on different displays.
Dangerous game again from Microsoft promoting things as something they are not.
Virtual desktops are already a well-defined concept - and people will expect the desktop to be able to change content (be dynamic) ... the data and launching programs for documents, different backgrounds.
... but as others may already have stated in other threads: (Right now) Windows 10 does not contain virtual desktops/displays/screens. Not at all.
A skeptical hypothesis - hopefully it is not so, and we will be able to work with data in a valuable way. The data is on the desktop anyway today - so why not make it real virtual desktops? I simply do not understand the decision.
So here comes the skeptical hypothesis - it's not a Steve thing. It's Microsoft still looking for that next revamped business model to finance their future.
So the freak kind of virtual desktops (virtual desktops in Win10 a lie?) will disappoint - have already begun to do so - and seems Microsoft is just taken up with inserting an additional intermediary step towards relaunching the appstore and hiding
all the user data in cloud again. Really, hiding the difference between data availability - not making the cloud something MORE but making the local system something LESS. The NEXT BIG thing? So we're going to loose file system, folders and the general ability
to form concepts of our own - and get a freak system? The NEXT BIG thing - data integration? Because data was hidden away now. Also in local systems. Artificially creating new problems - rather than solving new interesting ones?
We need to able to pin the data onto the display whether desktop, start screen, what ever. It's also on the feature requests. Desktops/Start Screen/Original displays for workflows/whatever actual starting points on login ... needs to have
more links than application from appstores and application containers linked to them.
If any more app (read: not cloud, data) but appstore, appstore, appstore
application containers hiding the data away comes into the UI I am going with Linux. I am that close ...A better name would be Virtual Display Layouts ... Virtual Screens ... Virtual Start Screens (please let us be able to pin files/folders to the Start Screen, a requested voted for feature for Windows 10).
You see, go back and read the topics for Windows 8 ... you will learn the Start Screen is/was the new desktop - and should have been made virtual.
So please get your act together and stop confusing everything ... and make on coherent system. Drop the Start Screen - and go with the virtual desktop
(put the Start Screen technology into the virtual desktop - and let users pin folders and files there as requested ... both local and in the cloud) -
APP-V 5.0 VDI A Temporary Profile is created when I log into the Virtual Desktop
Dear Sirs
I'm Enzo , an Italian System Engineer. Together with other fellows we created a test environment :
- a VDI machine (POC-VDI,10.102.94.219, Windows Server 2012 R2) with
RD Web Access, RD Connection Broker, RD Virtualization Host, RD Session Host Installed
The Hyper-V Environment includes :
- DHCP Server (to provide addresses to Virtual Desktop Collections)
- APP-V_5.0_Server , Application Virtualization Management Console 5.0, with 2 published packages (Office 2010 and Open Office 4)
- Sequencer_W8-1, Application Virtualization Sequencer 5.0
- Client_8-1 , Client Windows 8.1 with Application Virtualization Client 5.0
From the Client_8-1 we can download and run the two published packages from the server (user VDI_TEST_1)
The Client_8-1 has been used as the template (sysprep /oobe /generalize /shutdown) for the Virtual Dektop (APP-0 and APP-1)
included in the collection 'APPV' (Pooled, Automatically Manage Virtual Desktop, Roll Back Virtual Desktops Enabled).
I connect to the 'RD Web Access' ( http 10.102.94.219 RDWeb, user VDI_TEST_1) , I then connect to APPV collection .
When I get logged into the Virtual Desktop (APP-0 or APP-1, user VDI_TEST_1), a Temporary Profile is created. Why ?
We configured :
User Profile Disk : share Location 10.102.94.219 UPD
UPD : Share Everyone Full Control
Security SYSTEM Full Control
Network Service
Full Control
POC-VDI$ Full
Control
Administrators (POC-VDI\Aministrators)
Full Control
Users (POC-VDI\Users)
Read & Execute
I am puzzled as long as when I get logged into the Virtual Desktop, a Temporary Profile is created. Why ?
Thanks in advance for your kind attention
EnzoHighly unlikely it has anything to do with App-V.
Start troubleshooting by looking at permissions on shares and folder under the shares for the profile.
Tim Mangan MVP for App-V and Citrix CTP Author of AppV books: "The Client Book" and "OSD Reference Book" (http://www.tmurgent.com/Books ) -
How to delete Ubuntu virtual desktop and free up allocated space in windows 8?
I have tried out Hyper-V for the first time to install Ubuntu desktop. During the installation process, 10GB of space is allocated. I believe this space would have been created as a separate partition and formatted
to linux file system. Please correct me if I am wrong.
Now I would like to remove the Ubuntu virtual desktop and free up the allocated space. I have deleted the desktop from the Hyper-V manager. Is this sufficient to free up the space?
Disk partition tool shows following partitions
Volume
Layout
Type
FS
Status
Capacity
Free
Volume (C;) Simple
Basic NTFS
Healthy(Boot, Page File ...) 218GB
8GB
Volume <nolabel> Simple
Basic Healthy(Recovery Partition)
450MB 450MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
350MB
350MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
10.5GB
10.5GB
Volume <nolabel>
Simple
Basic
Healthy(EFI
System Partition)
260MB
260MB
Volume <nolabel>
Simple
Basic
Healthy(Primary
Partition)
8GB
8GB
I am not sure of the unnamed, unused volume. Hence I listed all.
However Diskpart tool in command prompt does not show the last one [ 8gb]. Does this mean if this was allocated
to Virtual desktop? Please helpYou must delete the VHDx that you created when you created the VM.
This is the virtual disk that Ubuntu was installed into - you will not see this as a volume, you will see this as a VHDx file.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Screen Sharing and Virtual Desktop
Is there a way to force a new remote screen sharing connect to a "Virtual Desktop"?
In my experience, if another user is logged into the computer the new remote screen connection will be forced or given the option to connect to a virtual desktop. This will allow the new connection to run in the "background" without the first connection being influenced.
The issue is when a new remote connection is initiatied and no other connections are active the new connection will be shown on the computer's hardware monitor. i.e. No option is given to connect via a virtual desktop.
This is a security issue because a user can connect remotely and if he is the only connection on the computer he will have all his work shown on the hardware display.
I am hoping to find a way to force all remote connections to be on virtual desktops.I guess its worth mentioning that although you can indeed screen share from Leopard to Tiger, it only works when you are on the same network. But Remote Desktop works across the internet...
Of course the trick to using Remote Desktop from a truly "remote" location elsewhere on the internet is that you have to be able to reach the IP of the computer you want to control, which can be tricky if its behind a NAT and the person your trying to reach is my Mom who has no idea how to configure her NAT, or firewall, or even find her IP address without my help.
Screen sharing Leopard to Leopard via iChat should be much more straight forward... translation: this will make my life much easier the next time my mom needs help. -
What licenses do I need to get a virtual desktop environment up and running?
I’m trying to figure out what licenses I need to get a full Windows Virtual Desktop Infrastructure (VDI) up and running with the Remote Desktop Service (RDS) roles.
I have Win.Server 2012 running Hyper-V, which has about 10 different virtual machines (VM) with either Win.7 or Win.8 installed on it. These VMs will act as virtual desktops (VD) for about 200 people to remotely access and use.
My question is, what licenses do I need to support this scenario?
So far, I’m planning to purchase a few Windows Server 2012 Standard Edition with 10 Client Access Licenses ( $1414.19 each). I’m assuming that’s 1 license for the server and 10 Client Access Licenses (CAL) for users who will access the VDs. I’m also planning
to buy about 200 RDS CALs ($149 each) for the rest of the users to access the VDs. Do I need to buy additional licenses for each VM image I create (the 10 images I mentioned earlier)? These VMs are in a pooled virtual desktop collection, so they reset themselves
when users disconnect from them. If I have personal desktop collections which give unique desktops to each user and saves their settings, will my license have to change if I have that too?
At first I thought just buying the RDS CALs will allow me to install windows where ever I want, how many times I want and all I have to worry about is paying for the client access, but do I need to pay for the OS as well? So essentially I’m doubling the
license?
A side question not really related is, if I have Windows Thin PC, (which was said to come free if I have SA with another product) and bought the Windows Server license, does that come with SA and I can install Windows Thin PC as many times as I want
on which ever desktop I have that will connect to this VDI system?The 10 server licenses are fine, but they don't help you with VDI or remote desktops. I you want to install the Remote Desktop Session Host (formerly known as Terminal Server) role on all your servers und provide remote desktops for your 200 users, 200 RDS
CALs are the right choice (per user or per device).
But if your 200 users have access to virtual desktops, you need 200 VDI licenses. It doesn't matter if you only have 10 virtual desktops if potentially all your 200 users have access to them. VDI licensing is not based on a concurrent model, so every client
that can connect to a VM needs its own license. If Windows 8 Enterprise with SA is on all your client devices, you're set because SA gives users access rights to up to 4 Win8 or Win7 VMs concurrently (local or remote). In addition
it gives them a so-called companion subscription license for personally owned, non-primary devices.
For those primary corporate devices that are without SA, you'll need to purchase a single VDA license for each device that connects to any number of your Win7 or Win8 VMs. The same applies to personally owned devices of users who don't have a primary
corporate device with SA. In other words, BYOD is supported if your primary device is under SA.
For neither VDI/SA nor VDA it does matter if users are connecting to different VM images or only one. Typically, they cannot connect to more than 4 VMs at the same time in order to stay within the licensing limits.
Benny -
How do you remove virtual desktops from a Windows Server 2012 R2 Pooled VDI collection
All - I have created a Pool VDI Collection with 15 total virtual desktops in it. I need to reduce the number of virtual desktops in that collection to five. I have searched through the GUI, TechNet and done a number of Google searches but nothing helpful
comes back. Does anyone know how to do this?
I am guessing I cannot just delete them out of Hyper-V since the collection knows how many desktops it is supposed to have assigned to it.
Thanks in advance.
Will SmothersHi Will,
Thank you for posting in Windows Server Forum.
We can use PowerShell command “Remove-RDVirtualDesktopFromCollection“ to achieve your goal.
PS C:\> Remove-RDVirtualDesktopFromCollection -CollectionName "Virtual Desktop Pool" -VirtualDesktopName @("RDS-WKS-A27") -ConnectionBroker "rdcb.contoso.com"
More information.
Remove-RDVirtualDesktopFromCollection
http://technet.microsoft.com/en-us/library/jj215515.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue
I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
In the debug logs it shows.
Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
desktop Win7VMSF is shut down.
Please help on resolving this GetVMState issue.Hi Krishna,
Thank you for posting in Windows Server Forum.
When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
• Database based on SQL Server 2008 R2
• Static IP Address for all Broker
• Round Robin DNS
• All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
• The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
More information.
Windows Server 2012 R2: Unable Add New VDI Template
In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
then reboot the server. Finally check the result.
Windows Server 2012 Virtual Desktop Template Issue
Hope it helps!
Thanks.
Dharmesh Solanki -
Dell Precision T5810 Core options and GPU config? Running CC on virtual desktops?
Hi, two questions really but didn't want to start multiple threads.
I tried searching for answers to my questions but was not very successful so am trying to post. I am looking at buying some computers for our office which will be using the CC subscription for their workflow. Predominately this is short form video editing on Premiere (3-10min, AVCHD & DSLR mix, 2-3 camera steams, 50/50 just as straight streams/multicam), some light to mid graphics on After Effect and Photoshop then compression through Media Encoder.
Our media will be stored on a Small Tree shared storage server across a dedicated gigabit network.
As Dell have just launch their new workstations using the new version of the Xeon 16 series with DDR4 RAM I was thinking of going down that road. Would I be better getting the Hex Core 1650v3, 500GB HDD, 16GB DDR4 2133 RAM with either a Quadro K2200 or Firepro W5100, or Quad Core 1620v3, 500GB HDD, 16GB DDR4 2133 RAM with Quadro K4200?
As I understand it is important make sure systems are balanced between CPU, GPU, RAM and discs. Which of the above configs would perform better for our work, as I am not sure if the hex core will be more so with a lower GPU, or if the quad with a faster/more expensive GPU will perform better?
I know when it comes to GPU's a kick off would be to say ditch the workstation line for a GTX to save money, but we have a business deal with Dell as a business their 3 year support is an important consideration to us something they do not support if we chop and change out unsupported components such as a GTX card.
The other option I have been made by our IT department is that we could buy Dell servers, add graphics cards and run virtual desktops for the editors on them instead of buying stand alone towers. I have not really seen this being done before for video editing which suggests to me that this does not work for one reason or another, but I have not been able to find out much with my Google-fu (which again is probably a bad sign). Is this as bad an idea as I am assuming or is this a potential avenue.
Hopefully that has all made sense and apologies if I have not followed any forum etiquette, (first time so be kind!)
Thanks in advance for all and any help.
EdHi,
Thank you for the replies. Having looked at the virtual option more closely I have discounted it as an option. Was never really something I wanted but our IT insisted I evaluated it as part of the process.
Regarding the workstations I had decided to go with the hex core E5 1650 option so it is good to hear I am heading down the right road! My reasoning for look at the new T5810 (DDR4 RAM) over the previous T3610 which had the 1650v2 (DDR3 RAM) was based on the fact the the cost difference on the website was only about 70-80 pounds. For that little difference it seemed like a good idea to buy the latest offering for future proofing. I will however get Dell to quote me for the two systems and see what the end result is after adding in 32GB of RAM.
I will also speak to them about their warranty as I was under the impression that by putting a non approved card in the system that if there were issues that involved the card in anyway then they would not assist. Either way I had decided to go Nvidia after reading up about the Firepro computability. Sadly I don't think I would have budget for the K4200 but the K2200 looks like it might be a decent performer as it is based on the maxwell architecture so I would expect it punch a bit above its weight. Would this act as the bottle neck in such a system or would it be fast enough to balance out a E5 1650 and 32GB RAM?
If it is only the card itself that will not be supported then I guess this is lesser risk and I could consider a consumer card. If I did go down the GTX route then looking at the price of GTX 770 (ideally I would want the 4GB version as the 2GB could be limiting for the future), there does not seem to be a lot in it between them and the GTX970. I would expect due to the maxwell architecture that this would offer better performance at a lower power draw so I would expect the be better temps than the previous gen. If so then would this be a better option to go for?
For drives I will look at putting the media cache onto separate drives (we currently do this with our systems that run local storage), though will probably have to be HDD rather than SDD as I have them spare and fast running out of budget!
Thanks again for all comments. -
Hi all, thought I would share a fix I found out after hours of pulling my hair out.
If you get the following error when creating a new RD Collect: "The virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualization host server is available on the network and
the virtual desktop is shut down"
ENSURE your RD Connection Broker and RD Virtualization Host are both either 2012 or 2012 r2. I was unable to create new VD Collections until I moved my Connection Broker from a 2012 box, to a 2012 r2 box. (My RD Virt Host is 2012 r2.) Once I did that,
everything worked fine.Hi,
Thanks for your good sharing.
I think it will help the people who have the same issue.
Have a nice day.
Regards.
Vivian Wang
Maybe you are looking for
-
I have lost my mail and the bullet on bottom of page. How do I restore?
I have a Macbook Pro and I have done something that has lost my mail. I have tried going to the mail account but I cannot figure out what I have done. Also I have lost the rocket that usually appears at the bottom of my window. I think it may be so
-
Adobe Bridge CC Output Module Issues
I'm having to continually uninstall and reinstall the Output Module folder and workspaces file. The web gallery function in Bridge will work a few times, and then the next time I try to use it, it will create a folder with the usual index and resourc
-
While trying to activate Acrobat 9 Pro I am told the program can not connect to the server.
I have tries with firewalls on and off and two different ISP (Comcast and Sprint) and receive the same error every time. I am running Window Vista.
-
How do I get games for my ipod classic? the clickwheel toolbar has gone from itunes!
I used to be able to buy games for my ipod classic by clicking on apps then clickwheel games, this option has dissapeared from itunes, does this mean I can't get them anymore? or can I get them some other way?
-
Verizon DSL modem not connecting through Linksys wrt54g
I recently switched to verizon DSL from comcast. The verizon modem when connected directly to the back of my mac works amazingly well. Now i was to be able to connect with my laptop and xbox360 wirelessly which was not a problem with comcast. So i ta