Virtual Directory Error in Afaria Installation
Hello All , I have installed afaria server and unistalled once . Now i am trying to install again then i got stuck with error Product is already installed in virtual directory 'Afaria' those files will be validated in Afaria 7 Admin Setup . As per my knowledge there is no such vitual directory in IIS server . Because i have created new one . Can you please guide ? Thanks & Regards, Kunal Varaiya
Message was edited by: Michael Appleby
Hi Kunal
Can you check these three locations for any traces of a previous Afaria Administrator install:
- The physical directory (default: \Program Files (x86)\AfariaAdminUI
- In IIS, the presence of an Afaria Admin directory under the Default Web Site
- In the registry, the key HKEY_LOCAL_MACHINE\SOFTWARE\Afaria\Afaria\AdminUI
Regards
Nick
Similar Messages
-
ORACLE VIRTUAL DIRECTORY ERROR
LDAP: Unable to listen on Port 2323: Address already in use: JVM_Bind
Did you ever fixed or resolved the issue ? If yes, could you please share the reason for issue ?
Getting following errors in OVD logs :-
[ERROR] [OVD-60335] [com.octetstring.vde.dsmlv2.ImportExportVDE] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Failure in getting LDAP 1.[[
com.octetstring.vde.util.DirectoryException: LDAP Error 32 : No Such Object
[OVD-40066] [com.octetstring.vde.backend.jndi.ConnectionHandle] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Remote Server Failure:l120814vaps2013:21389.[[
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name 'ou=int,ou=people,dc=domain,dc=com',dc=com' -
Oracle Virtual Directory 10.1.4.0.1 installation on SUSE SLES10
I am attempting to install Oracle Virtual Directory version 10.1.4.0.1 on a brand new SUSE SLES10 Linux server. The installation fails due to missing libraries. This is true whether using the GUI or the console installation. The same set of binaries installs fine on a SLES8 and a SLES9 server.
The OVD 10.1.4.0.1 release notes and certification guide indicate that SLES10 is a supported platform. However, I cannot get the installer to work.
Following is the output and the error messages generated by the installer:
*** output start ***
# ./ovid1014.bin -i console
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.11813/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
*** output end ***
I verified that the libraries listed above are installed as part of the glibc package. The following glibc packages are installed:
glibc-2.4-31.2
glibc-devel-2.4-31.2
glibc-i18ndata-2.4-31.2
glibc-locale-2.4-31.2
Does anybody know why this is failing? Thanks in advance for your help.Here is the reply that I received from Oracle Support. The proposed workaround worked in my case. I am posting it here so that it may help others.
Workaround
===========
1.) cp ovid1014.bin ovid1014.bin.bak
2.) cat ovid1014.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" > ovid1014.bin
3) run the modified installer: ./ovid1014.bin
Note: 417016.1 "error while loading shared libraries during OVD install" was created to document the issue. -
I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20: <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21: </httpHandlers>
Line 22: <authentication mode="Forms">
Line 23: <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24: </authentication>Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen -
Error while accessing Oracle Virtual Directory 11g client view.
Hi everyone,
I'm a beginner in Oracle IDAM suite 11g.
I'm facing an issue while configuring LDAP adapter in Oracle Virtual Directory.
LDAP adapter is configured for ODSEE instances. Currently I've configured two instances.
For these adapters, the entries from ODSEE instances are getting populated under Adapter browser but under Client View while expanding the root we're getting the following error:
LDAPException: malformedRequest (2) Protocol Error LDAPException: Server Message: Protocol Error
In the diagnostic.log file I'm getting the following error:
[2012-02-28T11:38:55.255+05:30] [octetstring] [ERROR] [OVD-60335] [com.octetstring.vde.dsmlv2.ImportExportVDE] [tid: 20] [ecid: 0000JMcs_zPEWNppSO1Fic1FHBss000083,0] Failure in getting LDAP 1.[[
com.octetstring.vde.util.DirectoryException: LDAP Error 2 : localhost:1489
at com.octetstring.vde.backend.jndi.BackendJNDI.getInternalConnection(BackendJNDI.java:1023)
at com.octetstring.vde.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:920)
at com.octetstring.vde.backend.jndi.ConnectionHandle.getHolder(ConnectionHandle.java:382)
at com.octetstring.vde.backend.jndi.ConnectionHandle.search(ConnectionHandle.java:233)
at com.octetstring.vde.backend.jndi.JNDIEntrySet.initialize(JNDIEntrySet.java:203)
at com.octetstring.vde.backend.jndi.BackendJNDI.get(BackendJNDI.java:723)
at com.octetstring.vde.chain.Chain.nextGet(Chain.java:297)
at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.monitorSearch(MonitorPerformance.java:506)
at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.get(MonitorPerformance.java:444)
at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
at com.octetstring.vde.chain.PluginChain.runGet(PluginChain.java:234)
at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:489)
at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:427)
at com.octetstring.vde.backend.AdapterServiceInterface.getByAdapter(AdapterServiceInterface.java:649)
at com.octetstring.vde.backend.AdapterServiceInterface.get(AdapterServiceInterface.java:514)
at com.octetstring.vde.backend.BackendHandler.get(BackendHandler.java:592)
at com.octetstring.vde.chain.Chain.nextGet(Chain.java:289)
at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.monitorSearch(MonitorPerformance.java:506)
at com.octetstring.vde.chain.plugins.performance.MonitorPerformance.get(MonitorPerformance.java:450)
at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
at com.octetstring.vde.chain.plugins.AclCheckerPlugin.get(AclCheckerPlugin.java:398)
at com.octetstring.vde.chain.Chain.nextGet(Chain.java:308)
at com.octetstring.vde.chain.PluginChain.runGet(PluginChain.java:234)
at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:489)
at com.octetstring.vde.chain.PluginManager.runGet(PluginManager.java:427)
at com.octetstring.vde.chain.GlobalServicesInterface.runGet(GlobalServicesInterface.java:207)
at com.octetstring.vde.dsmlv2.ImportExportVDE.doGet(ImportExportVDE.java:428)
at com.octetstring.vde.dsmlv2.ImportExportVDE.process(ImportExportVDE.java:171)
at com.octetstring.vde.dsmlv2.DsmlService.doPost(DsmlService.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:358)
at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:342)
at com.octetstring.vde.admin.AuthFilter.doFilter(AuthFilter.java:259)
at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:334)
at com.octetstring.webgateway.filters.DOSFilter.doFilter(DOSFilter.java:67)
at org.mortbay.jetty.servlet.WebApplicationHandler$Chain.doFilter(WebApplicationHandler.java:334)
at org.mortbay.jetty.servlet.WebApplicationHandler.dispatch(WebApplicationHandler.java:286)
at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:567)
at org.mortbay.http.HttpContext.handle(HttpContext.java:1807)
at org.mortbay.jetty.servlet.WebApplicationContext.handle(WebApplicationContext.java:526)
at org.mortbay.http.HttpContext.handle(HttpContext.java:1757)
at org.mortbay.http.HttpServer.service(HttpServer.java:879)
at org.mortbay.http.HttpConnection.service(HttpConnection.java:789)
at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:960)
at org.mortbay.http.HttpConnection.handle(HttpConnection.java:806)
at org.mortbay.http.SocketListener.handleConnection(SocketListener.java:218)
at org.mortbay.util.ThreadedServer.handle(ThreadedServer.java:331)
at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:520)
Caused by: javax.naming.CommunicationException: localhost:1489 [Root exception is java.lang.NullPointerException]
at com.sun.jndi.ldap.Connection.<init>(Connection.java:207)
at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:118)
at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1580)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2652)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:293)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at com.octetstring.vde.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:422)
at com.octetstring.vde.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:453)
at com.octetstring.vde.backend.jndi.JNDIConnectionPool.getLdapContext(JNDIConnectionPool.java:276)
at com.octetstring.vde.backend.jndi.JNDIConnectionPool.checkOutContext(JNDIConnectionPool.java:167)
at com.octetstring.vde.backend.jndi.BackendJNDI.getInternalConnection(BackendJNDI.java:1009)
... 48 more
Caused by: java.lang.NullPointerException
at com.octetstring.vde.backend.jndi.OvdJndiWorkerCoordinator.register(OvdJndiWorkerCoordinator.java:100)
at com.octetstring.vde.backend.jndi.OvdJndiSocket.getInputStream(OvdJndiSocket.java:95)
at com.sun.jndi.ldap.Connection.<init>(Connection.java:190)
... 65 more
Kindly help me resolving this issue.Did you ever fixed or resolved the issue ? If yes, could you please share the reason for issue ?
Getting following errors in OVD logs :-
[ERROR] [OVD-60335] [com.octetstring.vde.dsmlv2.ImportExportVDE] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Failure in getting LDAP 1.[[
com.octetstring.vde.util.DirectoryException: LDAP Error 32 : No Such Object
[OVD-40066] [com.octetstring.vde.backend.jndi.ConnectionHandle] [tid: 25] [ecid: 0000J_Gc3Qu0ZrqawLicMG1G6Pz^00000J,0] Remote Server Failure:l120814vaps2013:21389.[[
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name 'ou=int,ou=people,dc=domain,dc=com',dc=com' -
Can't install latest itunes. error msg: "This installer has insufficient priviliges to access this directory: C:\ProgramData\Microsoft\Windows\StartMenu\Programs\ITunes. Log on as administrator or contact your system administrator." I am logged on as administrator and have been since i've owned this laptop. Any suggestions?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.
Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support -
Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer -
Problem register Oracle Virtual Directory to WebLogic - urgent ... pls help
Hi,
I'm a new to Oracle product and would like to install and run Oracle Virtual Directory for the following purpose:
Using LDAP client that connects to OVD and to issue ldapsearch command line based on the attrbiutes and filters of each one of the two Directories behind the OVD..
|-- Tivoli LDAP directory
LDAP client -> OVD ---|
|-- MS AD
I have downloaded the identity management package 11g and install only the OVD on Windows 2003 standard machine.
I then realized that I have to install the WebLogic package to have WEB UI to the OVD admin.
So I downloaded the WebLogic 10.3.1.0 package and install it.
I followed the installation instructions of
'Installing and Configuring Only Oracle Virtual Directory Without a WebLogic Administration Domain' at http://download.oracle.com/docs/cd/E12839_01/install.1111/e12002/ovd.htm#CIHFFAFH
and complete the installation.
Notice that the OVD and the WeblOgic SW are installed on the same Windows machine.
After that I had to register Oracle Virtual Directory with the WebLogic Administration Server.
Running the command-line I got the following error:
Deploying NonJ2EEManagement Application...Done
Command failed: Exception while registering the instance
Details are logged in C:\....\provision.log
opmnctl registerintance: failed
The provision.log file has the following exception call stack:
Aug 18, 2009 4:08:05 PM oracle.as.config.provisioner.InstallerCmdLine logInitialCommand
INFO: Start of command: [registerinstance, -adminHost, 127.0.0.1, -adminPort, 7001, -adminUsername, weblogic, -oracleHome, C:\oracle\product\11.1.1\OracleIDM_1, -oracleInstance, C:\as_admin\asinst_1]
Aug 18, 2009 4:08:14 PM oracle.as.config.provisioner.InstallerCmdLine handleRunFailure
SEVERE: Command failed:
oracle.as.config.ProvisionException: Exception while registering the instance
at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:239)
at oracle.as.config.provisioner.commands.RegisterInstanceCommand.execute(RegisterInstanceCommand.java:11)
at oracle.as.config.provisioner.InstallerCmdLine.run(InstallerCmdLine.java:86)
at oracle.as.config.provisioner.InstallerCmdLine.main(InstallerCmdLine.java:44)
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:595)
at oracle.as.config.impl.OracleASInstanceImpl.register(OracleASInstanceImpl.java:219)
... 3 more
Caused by: oracle.as.config.ProvisionException: The AdminServer is not enabled for NonJ2ee applications.
at oracle.as.config.impl.RuntimeServiceConnection.isValidJrfInstall(RuntimeServiceConnection.java:547)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:201)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:587)
... 4 more
Any thoughts ?Hi,
I am also facing the same problem. I have oracle internet directory 11.1.1 installed without domain. I then installed weblogic 32bit exe on same windows server.
while registering getting the same error. I think it is because of bit compatibility. OID is 64bit and weblogic is 32bit. Not sure.
thanks -
Installing Oracle Virtual Directory Manager client on Solaris 10
Hi,
While installing Oracle Virtual Directory Client on solaris 10, I am getting
"ovidm1014.bin : /tmp/install.dir.<number>/linux/resource/jre/bin/java: cannot execute" error while initiating the installer.
Can someone look into the message and advice me in overcoming the issue as we are held up on this for three days?
Earliest reply is favoured
ThanksHi,
Thanks once again for reply!!
If you already installed Oracle Virtual Directory Manager on Sun SPARC, can you brief us pre-requisite setting and installation steps, so that we can follow the same.
Because, we are getting error in the initialization of installation process itself. So, I think there must be some configuration settings to be made.
We already raised SR (Service Request) with Oracle, bu there is no reply from their side till now.
I am waiting for your reply ASAP
Regards -
Exchange 2013 - Unable to recreate ECP Virtual Directory using New-EcpVirtualDirectory
Hello,
I had a problem accessing ECP so I decided to recreate its virtual directory on the client access server. I used Remove-EcpVirtualDirectory. The cmd completed successfully. Then I tried running New-EcpVirtualDirectory and am getting the following error:
Argument: -Role ClientAccess
+ CategoryInfo : InvalidArgument: (:) [New-EcpVirtualDirectory], ArgumentException
+ FullyQualifiedErrorId : 3C22AE5F,Microsoft.Exchange.Management.SystemConfigurationTasks.NewEcpVirtualDirectory
Running the command using the -role clientaccess parameter doesn't change the outcome. I have tried running the Exchange setup using the recoverserver switch but the installator is unable to detect any problems with the installation and refuses to continue
with the recover. Any thoughts?Hi,
Unfortunately, this didn't help either, but it has resulted in a different error message which has eventually led me to an answer, so thank you very much for your help!
The problem turned out to be quite strange (or not, I'm not very proficient with Exchange). It turned out that all the commands that I was executing, were actually applied to the mailbox server not to the CAS (hance the -role clientaccess error - it couldn't
have been installed on a server that didn't have the role). Once, I used the -server parameter you proposed, the command failed again. The problem now was that while it was finally pointing to the right server it was still using the installation path on the
mailbox server (SIC!). Exchange on the mailbox server has been installed at a non-default location and somehow the New-EcpVirtualDirectory command ran on CAS was trying to get to that path. So the trick that finally worked and something that Microsoft again
doesn't include in their site was using the parameter -path as part of the command:
new-ecpvirtualdirectory -internalurl https://xx.xx.xx/ecp -role clientaccess -server servername -websitename "Default Web Site" -Path "C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\ecp"
Hope it helps some poor soul some day. Thank you all for your help. -
Stop redistributable msi creates virtual directory in iis
We are using the Crystal Reports 2008 .NET redistributable msi as part of our software installation. The msi creates a virtual directory in iis for the crystal reports viewer. Because the msi alters iis, one of our clients cannot install it due to their IT policy. Their policy cannot be changed.
Is there any way to prevent the msi from creating this virtual directory? We are not using the virtual directory.AG's answer is correct. But! If and only if your app does not use the viewer. If your app uses the CR DHTML viewer... well, good by viewer. E.g.; when the app wants to show the viewer, it will either error out, or you will not have the viewer and thus no report...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
EMC Crash when i try to - reset client access virtual directory
Hi All,
I have one exchagne server 2010 sp3 rollup 7 installed on server 2012R2 Std.
When i try to reset client access virtual directory the MMC is crashing.
In the event viewer i can find 3 error after to crash:
1.
The program mmc.exe version 6.3.9600.17415 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2360
Start Time: 01d04e7b531a4a0d
Termination Time: 4294967295
Application Path: C:\Windows\system32\mmc.exe
Report Id: 69db84d3-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
2.
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.OnThreadException(Exception e)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
3.
Faulting application name: mmc.exe, version: 6.3.9600.17415, time stamp: 0x54504e26
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x2014
Faulting application start time: 0x01d04e9e432feaef
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b8276755-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
When i try to preform the task from EMC that installed on my PC (Win 7 SP1 x64) everything works fine
Thank you.Hi Eliran,
Thank you for your question.
Are there any update recently?
We could refer to the following steps to troubleshoot:
1)disable A/V
2) Run: DISM.exe /Online /Cleanup-image /Restorehealth
http://support.microsoft.com/kb/947821/en-gb
3) follow http://support.microsoft.com/kb/929833/en-gb to upload %WinDir%\Logs\CBS\CBS.log
4) disable snap-ins exept DNS-snapin
5) run SDP
6) enable A/V
We could also re-install .Net 4.0 to check if the issue persist by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=17718
If the issue persist, we could install Exchange 2010 SP3 CU8 by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=45225
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim -
How to define a virtual directory for 1virtual server?
Hi there,
The last part is always the hardest. I succesfully converted my Apache configuration to the SunONE setup but one section and I fail to grasp where I'm going wrong...
SunONE Webserver 6.1SP5, I have quite a few virtual servers divided over several virtual classes. And now I'm trying to configure a 'virtual directory' (pfx2dir nametrans) limited to a single virtual server but no matter what I try I can't get it to work...
In the administration guide I read about the NameTrans directive and how it should be used in the default object (in obj.conf ofcourse). So when I have something like this all works as it should, but for all virtual servers in the class:
<Object name="default">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Object>So when reading up even more I came across the NSAPI programmers guide which explained that you can have both <Object> and <Client> tags. Because of the 'urlhost' parameter with the Client tag I figured that it should be possible to limit the NameTrans line mentioned above to but one virtual server:
<Client urlhost="catslair.intranet.lan">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Client>But whenever I use this approach the server refuses to start and presents me with an error:
[13/May/2006:16:38:10] config (19621): CORE3185: Invalid configuration: File /usr/local/sun/SUNWwbsvr/https-magi.intranet.lan/config/server.xml, line 178, column 99: HTTP3258: Error processing Mirrors.obj.conf line 51: HTTP2215: directive outside objectAt first I didn't understand exactly what it meant, I even stumbled upon a bug report which triggered the same error (http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4979377) but after reading up on this I can only conclude that NameTrans can only be used within an <Object> block. The manuals also hint into this direction since it becomes obvious that the preffered approach is using this in the default object.
So picture my surprise when I came across http://docs.sun.com/source/817-6252/npgobjcn.html#wp1041206 in the NSAPI programmers guide, its past the table. One of the examples shows this approach:
<Client odds="25%">
NameTrans fn="redirect" from="/Pogues" url-prefix="http://pogues.example.com"
</Client>Because I was sure about urlhost being a parameter for the Client tag I tried copying the above example, but when I give it a try I'm once again greeted with the error I mentioned earlier "directive outside object".
So can anyone please point me in the right direction? Is it possible to setup a virtual directory for a single virtual server and if so how do I proceed since <Client> doesn't seem to work. thanks in advance for any tips you can give me.
Message was edited by:
Lion-OThanks a lot for the example, that fixed the problem.
I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening. -
Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed
Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO: Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO: ...and 11.1.0.0...
00:00.016: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO: iexplore.exe version check success. Install can proceed.
00:00.016: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO: Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO: Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO: Hardware support check succeeded. Installation will continue.
00:02.870: INFO: Windows 7 operating system detected.
00:02.886: INFO: Service pack major: 1
00:02.886: INFO: Service pack minor: 0
00:02.886: INFO: Service pack name: Service Pack 1
00:02.886: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO: Waiting for 0 prerequisite downloads.
01:37.423: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO: Waiting for 0 language pack downloads.
01:37.423: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO: No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO: Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR: Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO: Waiting for Active Setup to complete.
02:20.963: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO: SQM Upload returned 403
02:36.453: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO: Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO: Released Internet Explorer Installer Mutex
Taweesak ArchawamaitreekoolDISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you. <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info DISM DISM.EXE:
2014-05-29 16:53:55, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info DISM DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info DISM DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning DISM DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info DISM DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info DISM DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info DISM DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info DISM PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info DISM PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info DISM DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool
Maybe you are looking for
-
Attempting to connect my new Lumia 620 by USB via Nokia Suite. Message 'installing USB driver' appears but nothing downloads. Running Windows 7 on my PC. Unable to connect phone, backup, update etc. Is this common? Solved! Go to Solution.
-
Hyperion shared services installation Help.
Hi I just started hyperion installation on my NOTE BOOK PC. OS : 2003 server. Databse : SQL SErver 2005 with service pack 1 Oracle 10g I downloaded All hyperion SW from oracle.com. I am able install shared services but not able to configure any thing
-
Clients using Muse/business catalyst to edit their site
I am currently hosting clients' sites from my Creative Cloud account. Do clients have to sign up for a CC account to continue to host and edit their site? Is there a way to transfer Muse sites to another account?
-
Installation issues Adobe Pro X as a AAME package
Hi there, We have some installation issues with a created Adobe Pro X package. This is a new problem, the same package was installed 4 months ago on a similar system (Windows 7 enterprise edition x64) and even on a Windows Server 2008 (terminal serve
-
Number value average based on time average
Hello, I am in need of help of trying to develop a formula to determine numerical average based on time average. The example I have is, Time Value 9:00:00 102 9:00:05 103 9:00:10 104 9:00:15 105 9:00:20 106 9:00:25 107 9:00:30 108 9:00:35 109 9:00